When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI (Horizontal Transve...When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI (Horizontal Transverse Isotropy) formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.展开更多
The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used ...The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used to evaluate the azimuthal character of borehole formation. In this paper, a 3D finite difference method was used to simulate the acoustic fields in a fluid-filled borehole generated by a traditional monopole source and a phased arc array. Acoustic waveforms were presented for both cases. The analysis of the simulated waveforms showed that different from the monopole source, the acoustic energy generated by the phased arc array transmitter mainly radiated to the borehole in a narrow azimuthal range, which was the key technique to implement azimuthal acoustic well logging. Similar to the monopole source, the waveforms generated by the phased arc array in the fluid-filled borehole also contain compressional (P) waves and shear (S) waves refracted along the borehole, which is the theoretical foundation of phased arc array acoustic well logging.展开更多
In conventional slowness-time coherence(STC)method,slowness and time need to be searched at the same time,which limits the precision and lowers the efficiency.The dichotomy method combined with slowness-time coherence...In conventional slowness-time coherence(STC)method,slowness and time need to be searched at the same time,which limits the precision and lowers the efficiency.The dichotomy method combined with slowness-time coherence algorithm aims to enhance the efficiency of data processing and to improve the precision.The algorithm changes the searching pattern of conventional slowness-time coherence method to acquire the slowness of component waves in array acoustic logging data.Based on energy ratio of short time window versus long time window and slowness-time coherence method,the algorithm first acquires the arrivals of the component waves using energy ratio of short time window versus long time window method.It then uses the calculated results as the arrivals in conventional slowness-time coherence method,so the slowness-time two-dimensional searching process is simplified to slowness searching process.Based on dichotomy method,the searching pattern is further optimized in replace of the ergodic searching pattern in conventional slowness-time coherence method,which means that as the iteration proceeds,the current searching interval is reduced to half of the former,so the number of searching times is decreased.The dichotomy method combined with slowness-time coherence algorithm is applied to well L in the data processing.Compared with conventional slowness-time coherence method,for compressional wave,the searching efficiency of the algorithm is 4.53 times better,while for Stoneley wave,the searching efficiency is 1.85 times better.Compared with conventional logging data,the average absolute error of the results of the dichotomy method combined with slowness-time coherence algorithm is 1.14μs/ft smaller than that of the conventional method,while the average relative error is 1.2 percent lower.The dichotomy method combined with slowness-time coherence algorithm shows good results in its application,which can enhance the processing efficiency remarkably while getting reliable results at the same time.展开更多
文摘When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI (Horizontal Transverse Isotropy) formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.
基金supported by the National Natural ScienceFoundation of China(Grant Nos.10534040,40574049 and 40874097)the Research Fund for the Doctoral Programof Higher Education(Grant No.20070425028)the Foundation of State Key Laboratory of Petroleum Resourceand Prospecting,China University of Petroleum(Grant No.PRPDX2008-08).
文摘The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used to evaluate the azimuthal character of borehole formation. In this paper, a 3D finite difference method was used to simulate the acoustic fields in a fluid-filled borehole generated by a traditional monopole source and a phased arc array. Acoustic waveforms were presented for both cases. The analysis of the simulated waveforms showed that different from the monopole source, the acoustic energy generated by the phased arc array transmitter mainly radiated to the borehole in a narrow azimuthal range, which was the key technique to implement azimuthal acoustic well logging. Similar to the monopole source, the waveforms generated by the phased arc array in the fluid-filled borehole also contain compressional (P) waves and shear (S) waves refracted along the borehole, which is the theoretical foundation of phased arc array acoustic well logging.
基金Supported by the National High Technology Research and Development of China(863 Programme)(No.2013AA092501)
文摘In conventional slowness-time coherence(STC)method,slowness and time need to be searched at the same time,which limits the precision and lowers the efficiency.The dichotomy method combined with slowness-time coherence algorithm aims to enhance the efficiency of data processing and to improve the precision.The algorithm changes the searching pattern of conventional slowness-time coherence method to acquire the slowness of component waves in array acoustic logging data.Based on energy ratio of short time window versus long time window and slowness-time coherence method,the algorithm first acquires the arrivals of the component waves using energy ratio of short time window versus long time window method.It then uses the calculated results as the arrivals in conventional slowness-time coherence method,so the slowness-time two-dimensional searching process is simplified to slowness searching process.Based on dichotomy method,the searching pattern is further optimized in replace of the ergodic searching pattern in conventional slowness-time coherence method,which means that as the iteration proceeds,the current searching interval is reduced to half of the former,so the number of searching times is decreased.The dichotomy method combined with slowness-time coherence algorithm is applied to well L in the data processing.Compared with conventional slowness-time coherence method,for compressional wave,the searching efficiency of the algorithm is 4.53 times better,while for Stoneley wave,the searching efficiency is 1.85 times better.Compared with conventional logging data,the average absolute error of the results of the dichotomy method combined with slowness-time coherence algorithm is 1.14μs/ft smaller than that of the conventional method,while the average relative error is 1.2 percent lower.The dichotomy method combined with slowness-time coherence algorithm shows good results in its application,which can enhance the processing efficiency remarkably while getting reliable results at the same time.