To improve the tensile bond strength of denim bonding agents, the adhesion between denim and MMA resin was investigated by applying initiator systems containing 1-cyclohexyl-5-ethyl barbituric acid (CEB), copper acety...To improve the tensile bond strength of denim bonding agents, the adhesion between denim and MMA resin was investigated by applying initiator systems containing 1-cyclohexyl-5-ethyl barbituric acid (CEB), copper acetyl acetonate (CAA), quaternary ammonium chloride (QAC). cupric ion, with the addition of TEGDMA, an.d pretreatment solution for denim, and an HEMA primer. The effects of a cross-linking agent on barbituric acid-initiated denim bonding resin were examined by measuring degree of conversion, molecular weight, hardness of bonding resin, and tensile bond strengths.展开更多
The development of unconventional petroleum resources has gradually become an important succession for increasing oil production.However,the related engineers and researchers are paying more and more attention to the ...The development of unconventional petroleum resources has gradually become an important succession for increasing oil production.However,the related engineers and researchers are paying more and more attention to the application of temporary plugging agents(TPAs)for their efficient development.TPAs can expand the stimulated reservoir volume(SRV)and facilitate the flow of oil and gas to the bottom of the well.Particle-gels used as temporary plugging agents have the characteristics of the simple injection process,good deformation,high plugging strength,and complete self-degradation performance,which have been widely applied in recent years.In this paper,five samples of DPPG polymerized by different molecular weights of cross-linking agents were prepared.In addition,infrared spectroscopy analysis,differential calorimetry scanning(DSC)analysis,static particle gel swelling and degradation performance evaluation experiments,and dynamic temporary plugging performance experiments in cores were conducted at 34°C.Results show that as the molecular weight of the cross-linking agent(at 0.01 g)in the DPPG molecule decreased from 1,000 to 200 Da,the fewer cross-linking sites of DPPG,the looser the microscopic three-dimensional mesh structure formed.The swelling ratio increased from 7 to 33 times.However,the complete degradation time increased from 40 to 210 min.Moreover,the DSC results confirmed that the higher the molecular weight of the cross-linking agent,the worse is chemical stability and the more prone it to self-degradation.DPPG samples had good temporary plugging performance in reservoir cores.DPPGs prepared by the cross-linking agent with smaller molecular weight has a stronger swelling ratio,higher gel strength,and greater plugging strength in the core permeabilities.Moreover,the degraded DPPG is less damaging to the cores.However,their slower degradation rates take a slightly longer times to reach complete degradation.The results of this paper can provide new ideas and a theoretical basis for the development of particle gel-type temporary plugging agents(TPA)with controllable degradation time in low-temperature reservoirs.It can help to expand the application range of existing DPPG reservoir conditions.展开更多
Corneal collagen cross-linking with UVA-riboflavin is currently the only method for preventing the progression of keratoconus from the pathological perspective. Topical application of a direct cross-linking agent is n...Corneal collagen cross-linking with UVA-riboflavin is currently the only method for preventing the progression of keratoconus from the pathological perspective. Topical application of a direct cross-linking agent is now attracting widespread attention in clinical settings..This article reviews the research progress in the application of indirect or direct cross-linking agents(e.g., riboflavin, glucose, ribose, glutaraldehyde,formaldehyde,.glyceraldehyde,.short chain aliphatic β-nitro alcohol, and genipin) in the treatment of corneal diseases and analyzes the cross-linking efficacy,.toxicity,.and merits and disadvantages of each cross-linking agent,.providing clinical information for further studies.展开更多
The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means o...The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy. The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene, therefore they can be used for selective tungsten recovery from comulex salt solutions.展开更多
AIM:To observe the effects of femtosecond laserassisted excimer laser in situ keratomileusis combined with accelerated corneal cross-linking(FS-LASIK Xtra)on corneal densitometry after correcting for high myopia.METHO...AIM:To observe the effects of femtosecond laserassisted excimer laser in situ keratomileusis combined with accelerated corneal cross-linking(FS-LASIK Xtra)on corneal densitometry after correcting for high myopia.METHODS:In this prospectively study,130 patients underwent FS-LASIK or FS-LASIK Xtra for high myopia.Their right eyes were selected for inclusion in the study,of which 65 cases of 65 eyes in the FS-LASIK group,65 patients with 65 eyes in the FS-LASIK Xtra group.Patients were evaluated for corneal densitometry at 1,3,and 6mo postoperatively using Pentacam Scheimpflug imaging.RESULTS:Preoperative differences in corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups in different ranges were not statistically significant(P>0.05).Layer-by-layer analysis revealed statistically significant differences in the anterior(120μm),central,and total layer corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups at 1 and 3mo postoperatively(all P<0.05),the FS-LASIK Xtra group is higher than that of the FS-LASIK group.Analysis of different diameter ranges showed statistically significant differences between the FS-LASIK group and the FS-LASIK Xtra group at 1mo postoperatively in the ranges of 0–2,2–6,and 6–10 mm(both P<0.05);At 3mo postoperatively,the FS-LASIK Xtra group is higher than that of the FS-LASIK group in the ranges of 0–2 and 2–6 mm(P<0.05).At 6mo postoperatively,there were no statistically significant differences in corneal densitometry between the FS-LASIK group and the FS-LASIK Xtra group in different diameter ranges(all P>0.05).CONCLUSION:There is an increase in internal corneal densitometry during the early postoperative period after FS-LASIK Xtra for correction of high myopia.However,the densitometry values decreased to the level of conventional FS-LASIK at 6mo after surgery,with the most significant changes observed in the superficial central zone.展开更多
Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of...Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.展开更多
Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phe...Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investig...展开更多
This research paper describes the synthesis of thermo-reversible cross-linking of sago starch by grafting a furan pendant group(methyl 2-furoate)onto the starch backbone,followed by a Diels-Alder(DA)reaction of the fu...This research paper describes the synthesis of thermo-reversible cross-linking of sago starch by grafting a furan pendant group(methyl 2-furoate)onto the starch backbone,followed by a Diels-Alder(DA)reaction of the furan functional group with 1,1′-(methylenedi-4,1-phenylene)bismaleimide(BM).The proof of principles was provided by FTIR and 1H-NMR analyses.The relevant FTIR peaks are the carbonyl peak(υC=O sym)at 1721 cm^(−1);the two peaks appeared after DA cross-linking,i.e.,at 1510 cm^(−1)(corresponding toυCH=CH BM aromatic rings,stretching vibrations),and at 1173 cm^(−1)(assigned to cycloadduct(C-O-C,δDA ring))while the^(1)H-NMR result shows evidence for the presence of a furan ring in the starch matrices(in the range ofδ6.3-7.5 ppm).The crosslinked starch product is indeed thermally reversible,as is evident from the appearance of exothermal(DA,temperature range of 50℃-70℃)and endothermal(retro DA,temperature range of 125℃-150℃)transitions in the DSC thermograms.This paper not only proves the thermal reversibility but also demonstrates that the final product properties(chemical,morphology,and thermal stability)can be tuned by varying the annealing temperature,BM intake,and reaction time.展开更多
Solid polymer electrolytes(SPEs)have become increasingly important in advanced lithium-ion batteries(LIBs)due to their improved safety and mechanical properties compared to organic liquid electrolytes.Cross-linked pol...Solid polymer electrolytes(SPEs)have become increasingly important in advanced lithium-ion batteries(LIBs)due to their improved safety and mechanical properties compared to organic liquid electrolytes.Cross-linked polymers have the potential to further improve the mechanical property without trading off Li-ion conductivity.In this study,focusing on a recently developed cross-linked SPE,i.e.,the one based on poly(vinylene carbonate)-poly(ethylene oxide)cross-linked network(PVCN),we used solid-state nuclear magnetic resonance(NMR)techniques to investigate the fundamental interaction between the chain segments and Li ions,as well as the lithium-ion motion.By utilizing homonuclear/heteronuclear correlation,CP(cross-polarization)kinetics,and spin-lattice relaxation experiments,etc.,we revealed the structural characteristics and their relations to lithium-ion mobilities.It is found that the network formation prevents poly(ethylene oxide)chains from crystallization,which could create sufficient space for segmental tumbling and Li-ion co nductio n.As such,the mechanical property is greatly improved with even higher Li-ion mobilities compared to the poly(vinylene carbonate)or poly(ethylene oxide)based SPE analogues.展开更多
High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular applications.However,LiNi_(x)Co_(y)M...High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular applications.However,LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)faces challenges related to capacity decay caused by residual alkalis owing to high sensitivity to air.To address this issue,we propose a hazardous substances upcycling method that fundamentally mitigates alkali content and concurrently induces the emergence of an anti-air-sensitive layer on the cathode surface.Through the neutralization of polyacrylic acid(PAA)with residual alkalis and then coupling it with 3-aminopropyl triethoxysilane(KH550),a stable and ion-conductive cross-linked polymer layer is in situ integrated into the LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)(NCM)cathode.Our characterization and measurements demonstrate its effectiveness.The NCM material exhibits impressive cycling performance,retaining 88.4%of its capacity after 200 cycles at 5 C and achieving an extraordinary specific capacity of 170.0 mA h g^(-1) at 10 C.Importantly,this layer on the NCM efficiently suppresses unfavorable phase transitions,severe electrolyte degradation,and CO_(2)gas evolution,while maintaining commendable resistance to air exposure.This surface modification strategy shows widespread potential for creating air-stable LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)cathodes,thereby advancing high-performance LIBs.展开更多
Dear Editor,This letter focuses on the fixed-time(FXT)cluster optimization problem of first-order multi-agent systems(FOMASs)in an undirected network,in which the optimization objective is the sum of the objective fun...Dear Editor,This letter focuses on the fixed-time(FXT)cluster optimization problem of first-order multi-agent systems(FOMASs)in an undirected network,in which the optimization objective is the sum of the objective functions of all clusters.A novel piecewise power-law control protocol with cooperative-competition relations is proposed.Furthermore,a sufficient condition is obtained to ensure that the FOMASs achieve the cluster consensus within an FXT.展开更多
Melatonin(N-acetyl-5-methoxytryptamine)is known as the hormone of darkness because it is synthesized at night and involved in regulating the circadian clock.The hormone is primarily synthesized by the vertebrate pinea...Melatonin(N-acetyl-5-methoxytryptamine)is known as the hormone of darkness because it is synthesized at night and involved in regulating the circadian clock.The hormone is primarily synthesized by the vertebrate pineal gland,but is ubiquitous among invertebrates,unicellular organisms,plants,and even cyanobacteria(Hattori and Suzuki,2024).Melatonin is well-conserved evolutionarily and possesses several physiological functions,such as immune response,bone and glucose metabolism,and memory formation besides regulating the circadian rhythm.展开更多
Dear Editor,An adaptive consensus control algorithm for uncertain multi-agent systems(MAS),capable of guaranteeing unified prescribed performance,is presented in this letter.Unlike many existing prescribed performance...Dear Editor,An adaptive consensus control algorithm for uncertain multi-agent systems(MAS),capable of guaranteeing unified prescribed performance,is presented in this letter.Unlike many existing prescribed performance related works,the developed control exhibits some features.Firstly,a distributed prescribed time observer is introduced so that not only each follower is able to estimate the leader’s signal within a predetermined time,but also the control design for each agent is independent with its neighbors.展开更多
While newer,more efficient Lithium-ion batteries(LIBs)and extinguishing agents have been developed to reduce the occurrence of thermal runaway accidents,there is still a scarcity of research focused on the application...While newer,more efficient Lithium-ion batteries(LIBs)and extinguishing agents have been developed to reduce the occurrence of thermal runaway accidents,there is still a scarcity of research focused on the application of surfactants in different LIBs extinguishing agents,particularly in terms of patented technologies.The aim of this review paper is to provide an overview of the technological progress of LIBs and LIBs extinguishing agents in terms of patents in Korea,Japan,Europe,the United States,China,etc.The initial part of this review paper is sort out LIBs technology development in different regions.In addition,to compare LIBs extinguishing agent progress and challenges of liquid,solid,combination of multiple,and microencapsulated.The subsequent section of this review focuses on an in-depth analysis dedicated to the efficiency and challenges faced by the surfactants corresponding design principles of LIBs extinguishing agents,such as nonionic and anionic surfactants.A total of 451,760 LIBs-related patent and 20 LIBs-fire-extinguishing agent-related patent were included in the analyses.The extinguishing effect,cooling performance,and anti-recombustion on different agents have been highlighted.After a comprehensive comparison of these agents,this review suggests that temperature-sensitive hydrogel extinguishing agent is ideal for the effective control of LIBs fire.The progress and challenges of surfactants have been extensively examined,focusing on key factors such as surface activity,thermal stability,foaming properties,environmental friendliness,and electrical conductivity.Moreover,it is crucial to emphasize that the selection of a suitable surfactant must align with the extinguishing strategy of the extinguishing agent for optimal firefighting effectiveness.展开更多
文摘To improve the tensile bond strength of denim bonding agents, the adhesion between denim and MMA resin was investigated by applying initiator systems containing 1-cyclohexyl-5-ethyl barbituric acid (CEB), copper acetyl acetonate (CAA), quaternary ammonium chloride (QAC). cupric ion, with the addition of TEGDMA, an.d pretreatment solution for denim, and an HEMA primer. The effects of a cross-linking agent on barbituric acid-initiated denim bonding resin were examined by measuring degree of conversion, molecular weight, hardness of bonding resin, and tensile bond strengths.
基金supported by the Research Foundation of China University of Petroleum-Beijing at Karamay (No. YJ2018B02002 and XQZX20200010)the Natural Science Foundation of Xinjiang Uygur Autonomous Region (No. 2021D01E23 and 2019D01B57)+3 种基金the University Scientific Research Project of Xinjiang Uygur Autonomous Region (No. XJEDU2019Y067)the Xinjiang Uygur Autonomous Region Innovation Environment Construction Project (No. 2019Q025)the Sichuan Province Regional Innovation Cooperation Project (No. 2020YFQ0036)the CNPC Strategic Cooperation Science and Technology Project (ZLZX2020-01-04-04)
文摘The development of unconventional petroleum resources has gradually become an important succession for increasing oil production.However,the related engineers and researchers are paying more and more attention to the application of temporary plugging agents(TPAs)for their efficient development.TPAs can expand the stimulated reservoir volume(SRV)and facilitate the flow of oil and gas to the bottom of the well.Particle-gels used as temporary plugging agents have the characteristics of the simple injection process,good deformation,high plugging strength,and complete self-degradation performance,which have been widely applied in recent years.In this paper,five samples of DPPG polymerized by different molecular weights of cross-linking agents were prepared.In addition,infrared spectroscopy analysis,differential calorimetry scanning(DSC)analysis,static particle gel swelling and degradation performance evaluation experiments,and dynamic temporary plugging performance experiments in cores were conducted at 34°C.Results show that as the molecular weight of the cross-linking agent(at 0.01 g)in the DPPG molecule decreased from 1,000 to 200 Da,the fewer cross-linking sites of DPPG,the looser the microscopic three-dimensional mesh structure formed.The swelling ratio increased from 7 to 33 times.However,the complete degradation time increased from 40 to 210 min.Moreover,the DSC results confirmed that the higher the molecular weight of the cross-linking agent,the worse is chemical stability and the more prone it to self-degradation.DPPG samples had good temporary plugging performance in reservoir cores.DPPGs prepared by the cross-linking agent with smaller molecular weight has a stronger swelling ratio,higher gel strength,and greater plugging strength in the core permeabilities.Moreover,the degraded DPPG is less damaging to the cores.However,their slower degradation rates take a slightly longer times to reach complete degradation.The results of this paper can provide new ideas and a theoretical basis for the development of particle gel-type temporary plugging agents(TPA)with controllable degradation time in low-temperature reservoirs.It can help to expand the application range of existing DPPG reservoir conditions.
文摘Corneal collagen cross-linking with UVA-riboflavin is currently the only method for preventing the progression of keratoconus from the pathological perspective. Topical application of a direct cross-linking agent is now attracting widespread attention in clinical settings..This article reviews the research progress in the application of indirect or direct cross-linking agents(e.g., riboflavin, glucose, ribose, glutaraldehyde,formaldehyde,.glyceraldehyde,.short chain aliphatic β-nitro alcohol, and genipin) in the treatment of corneal diseases and analyzes the cross-linking efficacy,.toxicity,.and merits and disadvantages of each cross-linking agent,.providing clinical information for further studies.
文摘The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy. The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene, therefore they can be used for selective tungsten recovery from comulex salt solutions.
基金Supported by Shandong Province Medical Staff Science and Technology Innovation Program Project(No.SDYWZGKCJH2022021).
文摘AIM:To observe the effects of femtosecond laserassisted excimer laser in situ keratomileusis combined with accelerated corneal cross-linking(FS-LASIK Xtra)on corneal densitometry after correcting for high myopia.METHODS:In this prospectively study,130 patients underwent FS-LASIK or FS-LASIK Xtra for high myopia.Their right eyes were selected for inclusion in the study,of which 65 cases of 65 eyes in the FS-LASIK group,65 patients with 65 eyes in the FS-LASIK Xtra group.Patients were evaluated for corneal densitometry at 1,3,and 6mo postoperatively using Pentacam Scheimpflug imaging.RESULTS:Preoperative differences in corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups in different ranges were not statistically significant(P>0.05).Layer-by-layer analysis revealed statistically significant differences in the anterior(120μm),central,and total layer corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups at 1 and 3mo postoperatively(all P<0.05),the FS-LASIK Xtra group is higher than that of the FS-LASIK group.Analysis of different diameter ranges showed statistically significant differences between the FS-LASIK group and the FS-LASIK Xtra group at 1mo postoperatively in the ranges of 0–2,2–6,and 6–10 mm(both P<0.05);At 3mo postoperatively,the FS-LASIK Xtra group is higher than that of the FS-LASIK group in the ranges of 0–2 and 2–6 mm(P<0.05).At 6mo postoperatively,there were no statistically significant differences in corneal densitometry between the FS-LASIK group and the FS-LASIK Xtra group in different diameter ranges(all P>0.05).CONCLUSION:There is an increase in internal corneal densitometry during the early postoperative period after FS-LASIK Xtra for correction of high myopia.However,the densitometry values decreased to the level of conventional FS-LASIK at 6mo after surgery,with the most significant changes observed in the superficial central zone.
基金supported by National Natural Science Foundation of China(52103029 and 51903075).
文摘Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.
基金supported by the Major State Basic Research Program of China(No.2009CB623404)National NaturalScience Foundation of China(Nos.20736003,20676067)+2 种基金National High Technology Research and Development Programof China(No.2007AA06Z317)Foundation of Ministry of Education of China(No.20070003130)Foundation of theState Key Laboratory of Chemical Engineering(SKL-ChE-08A01).
文摘Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investig...
基金funded by the Indonesia Toray Science Foundation(No.:001/I/ITSF/SEK/2019).
文摘This research paper describes the synthesis of thermo-reversible cross-linking of sago starch by grafting a furan pendant group(methyl 2-furoate)onto the starch backbone,followed by a Diels-Alder(DA)reaction of the furan functional group with 1,1′-(methylenedi-4,1-phenylene)bismaleimide(BM).The proof of principles was provided by FTIR and 1H-NMR analyses.The relevant FTIR peaks are the carbonyl peak(υC=O sym)at 1721 cm^(−1);the two peaks appeared after DA cross-linking,i.e.,at 1510 cm^(−1)(corresponding toυCH=CH BM aromatic rings,stretching vibrations),and at 1173 cm^(−1)(assigned to cycloadduct(C-O-C,δDA ring))while the^(1)H-NMR result shows evidence for the presence of a furan ring in the starch matrices(in the range ofδ6.3-7.5 ppm).The crosslinked starch product is indeed thermally reversible,as is evident from the appearance of exothermal(DA,temperature range of 50℃-70℃)and endothermal(retro DA,temperature range of 125℃-150℃)transitions in the DSC thermograms.This paper not only proves the thermal reversibility but also demonstrates that the final product properties(chemical,morphology,and thermal stability)can be tuned by varying the annealing temperature,BM intake,and reaction time.
基金financially supported by the National Natural Science Foundation of China(Grant No.22325405,22321002,22279153)Liaoning Revitalization Talents Program(XLYC1807207,XLYC2203134)DICP I202104。
文摘Solid polymer electrolytes(SPEs)have become increasingly important in advanced lithium-ion batteries(LIBs)due to their improved safety and mechanical properties compared to organic liquid electrolytes.Cross-linked polymers have the potential to further improve the mechanical property without trading off Li-ion conductivity.In this study,focusing on a recently developed cross-linked SPE,i.e.,the one based on poly(vinylene carbonate)-poly(ethylene oxide)cross-linked network(PVCN),we used solid-state nuclear magnetic resonance(NMR)techniques to investigate the fundamental interaction between the chain segments and Li ions,as well as the lithium-ion motion.By utilizing homonuclear/heteronuclear correlation,CP(cross-polarization)kinetics,and spin-lattice relaxation experiments,etc.,we revealed the structural characteristics and their relations to lithium-ion mobilities.It is found that the network formation prevents poly(ethylene oxide)chains from crystallization,which could create sufficient space for segmental tumbling and Li-ion co nductio n.As such,the mechanical property is greatly improved with even higher Li-ion mobilities compared to the poly(vinylene carbonate)or poly(ethylene oxide)based SPE analogues.
基金supported by the National Natural Science Foundation of China(52162030)the Yunnan Major Scientific and Technological Projects(202202AG050003)+4 种基金the Key Research and Development Program of Yunnan Province(202103AA080019)the Scientific Research Foundation of Kunming University of Science and Technology(20220122)the Graduate Student Top Innovative Talent Program of Kunming University of Science and Technology(CA23107M139A)the Analysis and Testing Foundation of Kunming University of Science and Technology(2023T20220122)the Shenzhen Science and Technology Program(KCXST20221021111201003)。
文摘High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular applications.However,LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)faces challenges related to capacity decay caused by residual alkalis owing to high sensitivity to air.To address this issue,we propose a hazardous substances upcycling method that fundamentally mitigates alkali content and concurrently induces the emergence of an anti-air-sensitive layer on the cathode surface.Through the neutralization of polyacrylic acid(PAA)with residual alkalis and then coupling it with 3-aminopropyl triethoxysilane(KH550),a stable and ion-conductive cross-linked polymer layer is in situ integrated into the LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)(NCM)cathode.Our characterization and measurements demonstrate its effectiveness.The NCM material exhibits impressive cycling performance,retaining 88.4%of its capacity after 200 cycles at 5 C and achieving an extraordinary specific capacity of 170.0 mA h g^(-1) at 10 C.Importantly,this layer on the NCM efficiently suppresses unfavorable phase transitions,severe electrolyte degradation,and CO_(2)gas evolution,while maintaining commendable resistance to air exposure.This surface modification strategy shows widespread potential for creating air-stable LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)cathodes,thereby advancing high-performance LIBs.
基金supported in part by the National Natural Science Foundation of China(62373231,61973201)the Fundamental Research Program of Shanxi Province(202203021211297)Shanxi Scholarship Council of China(2023-002)。
文摘Dear Editor,This letter focuses on the fixed-time(FXT)cluster optimization problem of first-order multi-agent systems(FOMASs)in an undirected network,in which the optimization objective is the sum of the objective functions of all clusters.A novel piecewise power-law control protocol with cooperative-competition relations is proposed.Furthermore,a sufficient condition is obtained to ensure that the FOMASs achieve the cluster consensus within an FXT.
基金supported by JSPS KAKENHI Grant Number JP22K11823 to AH and JP22J01508 to KW。
文摘Melatonin(N-acetyl-5-methoxytryptamine)is known as the hormone of darkness because it is synthesized at night and involved in regulating the circadian clock.The hormone is primarily synthesized by the vertebrate pineal gland,but is ubiquitous among invertebrates,unicellular organisms,plants,and even cyanobacteria(Hattori and Suzuki,2024).Melatonin is well-conserved evolutionarily and possesses several physiological functions,such as immune response,bone and glucose metabolism,and memory formation besides regulating the circadian rhythm.
基金supported in part by the National Key Research and Development Program of China(2022YFB4701400/4701401)the National Natural Science Foundation of China(61991400,61991403,62250710167,61860206008,61933012,62273064)+1 种基金the Chongqing Outstanding Young Talents Support Program(cstc2024ycjh-bgzxm0085)CAAI-Huawei MindSpore Open Fund。
文摘Dear Editor,An adaptive consensus control algorithm for uncertain multi-agent systems(MAS),capable of guaranteeing unified prescribed performance,is presented in this letter.Unlike many existing prescribed performance related works,the developed control exhibits some features.Firstly,a distributed prescribed time observer is introduced so that not only each follower is able to estimate the leader’s signal within a predetermined time,but also the control design for each agent is independent with its neighbors.
基金supported by the National Key Research and Development Program of China (No.2017YFC0804700)the Opening Project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology (No.KFJJ23-23M)。
文摘While newer,more efficient Lithium-ion batteries(LIBs)and extinguishing agents have been developed to reduce the occurrence of thermal runaway accidents,there is still a scarcity of research focused on the application of surfactants in different LIBs extinguishing agents,particularly in terms of patented technologies.The aim of this review paper is to provide an overview of the technological progress of LIBs and LIBs extinguishing agents in terms of patents in Korea,Japan,Europe,the United States,China,etc.The initial part of this review paper is sort out LIBs technology development in different regions.In addition,to compare LIBs extinguishing agent progress and challenges of liquid,solid,combination of multiple,and microencapsulated.The subsequent section of this review focuses on an in-depth analysis dedicated to the efficiency and challenges faced by the surfactants corresponding design principles of LIBs extinguishing agents,such as nonionic and anionic surfactants.A total of 451,760 LIBs-related patent and 20 LIBs-fire-extinguishing agent-related patent were included in the analyses.The extinguishing effect,cooling performance,and anti-recombustion on different agents have been highlighted.After a comprehensive comparison of these agents,this review suggests that temperature-sensitive hydrogel extinguishing agent is ideal for the effective control of LIBs fire.The progress and challenges of surfactants have been extensively examined,focusing on key factors such as surface activity,thermal stability,foaming properties,environmental friendliness,and electrical conductivity.Moreover,it is crucial to emphasize that the selection of a suitable surfactant must align with the extinguishing strategy of the extinguishing agent for optimal firefighting effectiveness.