A UV cross-linked gel polymer electrolyte enabling high-rate and high voltage window for quasi-solid-state supercapacitors

Serving as a promising alternative to liquid electrolyte in the application of portable and wearable devices,gel polymer electrolytes(GPEs)are expected to obtain more preferable properties rather than just be satisfied with the merits of high safety and deformability.Here,an easy-operated method is employed to fabricate cross-linked composite polymer membranes used for GPEs assisted by UV irradiation,in which N-doped carbon quantum dots(N-CQDs)and TiO2are introduced as photocatalysts and additives to improve the performances of GPEs.Specifically,N-CQDs participate as a cross-linker to construct the inner porous structure,and TiO2nanoparticles serve as a stabilizer to improve the electrochemical stability of GPEs under high voltage(3.5 V).The excellent thermal and mechanical stability of the membrane fabricated in this work guarantee the safety of the supercapacitors(SCs).This GPE based SC not only exhibits prominent rate performance(105%capacitance retention at the current density of 40A g^(-1))and cyclic stability(85%at 1 A g^(-1)under 3.5 V after 20,000 cycles),but also displays remarkable energy density(42.88 Wh kg^(-1))with high power density(19.3 k W kg^(-1)).Moreover,the superior rate and cycling performances of the as-prepared GPE based flexible SCs under flat and bending state confirm the feasibility of its application in flexible energy storage devices.

Molecule‑Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery

The risk of flammability is an unavoidable issue for gel polymer electrolytes(GPEs).Usually,flameretardant solvents are necessary to be used,but most of them would react with anode/cathode easily and cause serious interfacial instability,which is a big challenge for design and application of nonflammable GPEs.Here,a nonflammable GPE(SGPE)is developed by in situ polymerizing trifluoroethyl methacrylate(TFMA)monomers with flame-retardant triethyl phosphate(TEP)solvents and LiTFSI–LiDFOB dual lithium salts.TEP is strongly anchored to PTFMA matrix via polarity interaction between-P=O and-CH_(2)CF_(3).It reduces free TEP molecules,which obviously mitigates interfacial reactions,and enhances flame-retardant performance of TEP surprisingly.Anchored TEP molecules are also inhibited in solvation of Li^(+),leading to anion-dominated solvation sheath,which creates inorganic-rich solid electrolyte interface/cathode electrolyte interface layers.Such coordination structure changes Li^(+)transport from sluggish vehicular to fast structural transport,raising ionic conductivity to 1.03 mS cm^(-1) and transfer number to 0.41 at 30℃.The Li|SGPE|Li cell presents highly reversible Li stripping/plating performance for over 1000 h at 0.1 mA cm^(−2),and 4.2 V LiCoO_(2)|SGPE|Li battery delivers high average specific capacity>120 mAh g^(−1) over 200 cycles.This study paves a new way to make nonflammable GPE that is compatible with Li metal anode.

Gel-Based Chemical Cross-Linking Analysis of 20S Proteasome Subunit-Subunit Interactions in Breast Cancer

The ubiquitin-proteasome system plays a pivotal role in breast tumorigenesis by controlling transcription factors, thus promoting cell cycle growth, and degradation of tumor suppressor proteins. However, breast cancer patients have failed to benefit from proteasome inhibitor treatment partially due to proteasome heterogeneity, which is poorly understood in malignant breast neoplasm. Chemical crosslinking is an increasingly important tool for mapping protein three-dimensional structures and proteinprotein interactions. In the present study, two cross-linkers, bis（sulfosuccinimidyl） suberate（BS3） and its water-insoluble analog disuccinimidyl suberate（DSS）, were used to map the subunit-subunit interactions in 20 S proteasome core particle（CP） from MDA-MB-231 cells. Different types of gel electrophoresis technologies were used. In combination with chemical cross-linking and mass spectrometry, we applied these gel electrophoresis technologies to the study of the noncovalent interactions among 20 S proteasome subunits. Firstly, the CP subunit isoforms were profiled. Subsequently, using native/SDSPAGE, it was observed that 0.5 mmol/L BS^3 was a relatively optimal cross-linking concentration for CP subunit-subunit interaction study. 2-DE analysis of the cross-linked CP revealed that α1 might preinteract with α2, and α3 might pre-interact with α4. Moreover, there were different subtypes of α1α2 and α3α4 due to proteasome heterogeneity. There was no significant difference in cross-linking pattern for CP subunits between BS3 and DSS. Taken together, the gel-based characterization in combination with chemical cross-linking could serve as a tool for the study of subunit interactions within a multi-subunit protein complex. The heterogeneity of 20 S proteasome subunit observed in breast cancer cells may provide some key information for proteasome inhibition strategy.

Degradable preformed particle gel as temporary plugging agent for low-temperature unconventional petroleum reservoirs:Effect of molecular weight of the cross-linking agent

The development of unconventional petroleum resources has gradually become an important succession for increasing oil production.However,the related engineers and researchers are paying more and more attention to the application of temporary plugging agents(TPAs)for their efficient development.TPAs can expand the stimulated reservoir volume(SRV)and facilitate the flow of oil and gas to the bottom of the well.Particle-gels used as temporary plugging agents have the characteristics of the simple injection process,good deformation,high plugging strength,and complete self-degradation performance,which have been widely applied in recent years.In this paper,five samples of DPPG polymerized by different molecular weights of cross-linking agents were prepared.In addition,infrared spectroscopy analysis,differential calorimetry scanning(DSC)analysis,static particle gel swelling and degradation performance evaluation experiments,and dynamic temporary plugging performance experiments in cores were conducted at 34°C.Results show that as the molecular weight of the cross-linking agent(at 0.01 g)in the DPPG molecule decreased from 1,000 to 200 Da,the fewer cross-linking sites of DPPG,the looser the microscopic three-dimensional mesh structure formed.The swelling ratio increased from 7 to 33 times.However,the complete degradation time increased from 40 to 210 min.Moreover,the DSC results confirmed that the higher the molecular weight of the cross-linking agent,the worse is chemical stability and the more prone it to self-degradation.DPPG samples had good temporary plugging performance in reservoir cores.DPPGs prepared by the cross-linking agent with smaller molecular weight has a stronger swelling ratio,higher gel strength,and greater plugging strength in the core permeabilities.Moreover,the degraded DPPG is less damaging to the cores.However,their slower degradation rates take a slightly longer times to reach complete degradation.The results of this paper can provide new ideas and a theoretical basis for the development of particle gel-type temporary plugging agents(TPA)with controllable degradation time in low-temperature reservoirs.It can help to expand the application range of existing DPPG reservoir conditions.

Dehydration Mechanism of Secondary Cross-linked Gels

In this paper, microscopic characteristics of preformed gels （PGs） and secondary cross-linked gels （SCG） with the same concentration were analyzed by atomic force microscopy （AFM）. Experimental results indicate that the microstructure of secondary cross-linked gels is a thick 3-D network, in which micro-holes and irregular macro-holes are embedded. The maximum width of the irregular macro-holes is 200 nm. In the SCG two different chemical bonds were formed, which leads to the structural inhomogeneity and the asymmetry of the crosslinking density. The structural inhomogeneity of SCG results in the formation of irregular macro-holes. The excessive cross-linking density is the primary reason for dehydration of SCG and the presence of irregular macro-holes in SCG can facilitate dehydration.

The effect of cations on gelation of cross-linked polymers

The effects of different cation concentrations and types on rheological property and stability of Guar, Xanthan, and Partially Hydrolyzed Polyacrylamide(HPAM) cross-linked gels were analyzed through experiments. Also, a new approach was developed to reduce the negative effects of cation by application of multi-walled carbon nano-tubes(MWCNTs). The presence of cations in cross-linked gel system will reduce the viscosity of gel, the higher the cation concentration is, the lower the viscosity will be. The bivalent cation has a greater viscosity reduction effect on gel than monovalent cation. The stability of cross-linked gels is worse with cations, this situation becomes more serious under higher salinity. MWCNTs were added to HPAM gel, cross-linked by(3-Aminopropyl) triethoxysilane(APTES), they surrounded cations and removed them from polymers and reduced the reaction possibility. This method enhances the viscosity and breakdown pressure of cross-linked gels, improves the stability of HPAM cross-linked gel under different operating conditions, and can be applied to related drilling projects.

Cross-linked Electrospun Gel Polymer Electrolytes for Lithium-Ion Batteries

Lithium-ion batteries(LIBs)benefit from an effective electrolyte system design in both terms of their safety and energy storage capability.Herein,a series of precursor membranes with high porosity were produced using electrospinning technology by mixing PVDF and triblock copolymer(PS-PEO-PS),resulting in a porous structure with good interconnections,which facilitates the absorbency of a large amount of electrolyte and further increases the ionic conductivity of gel polymer electrolytes(GPEs).It has been demonstrated that post-cross-linking of the precursor membranes increa ses the rigidity of the nanofibers,which allows the polymer film to be dimensionally sta ble up to 260℃while maintaining superior electrochemical properties.The obtained cross-linked GPEs(CGPEs)showed high ionic conductivity up to 4.53×10^(-3)S·cm^(-1).With the CGPE-25,the assembled Li/LiFeP04 half cells exhibited good rate capability and maintained a capacity of 99.4%and a coulombic efficiency of99.3%at 0.1 C.These results suggest that the combination of electrospinning technique and post-cross-linking is an effective method to construct polymer electrolytes with high thermal stability and steadily decent electrochemical performance,particularly useful for Lithium-ion battery applications that require high-temperature usage.

Novel Semi-IPN Gel Electrolyte for Polymer Lithium-ion Battery

A new type of semi-IPN gel electrolyte was prepared by thermal polymerization in this article.The cross-linked PEG200 (MXPEG) was prepared by condensation reaction in the presence of methacryloxypropyltrimethoxysilane (MAPTMS),the condensation product was then blent with PMMA and polymerized to form polymer blends with semi-IPN fabric.Differential scanning calorimetry and X-ray diffraction spectroscopy were used to investigate the thermal transition behavior of the polymer blends prepared.Ion-conducting behaviors and the electrochemical stability window for semi-IPN gel electrolyte were investigated by means ofimpedance spectroscopy and linear sweep voltammetry.The Arrhenius-type relationship was observed in the temperature dependence ofionic conductivity.All the properties shows that the prepared semi-IPN gel electrolyte possesses certain levels of electrolye salt and plasticizer were expected to have applications of gel polymer electrolyte for lithium polymer secondary batteries.

Performance Analysis of a Profile Control Agent for Waste Drilling Fluid Treatment

A method for the treatment of hazardous waste drilling fluids,potentially leading to environmental pollution,is considered.The waste drilling fluid is treated with an inorganic flocculant,an organic flocculant,and a pH regulator.The profile control agent consists of partially hydrolyzed polyacrylamide,formaldehyde,hexamethylenetetramine,resorcinol,phenol,and the treated waste drilling fluid itself.For a waste drilling fluid concentration of 2500 mg/L,the gelling time of the profile control agent is 25 h,and the gelling strength is 32,000 mPa.s.Compared with the profile control agent prepared by recirculated water under the same conditions,the present profile control agent displays better stability,salt-resistance,and performance.

仿瓷多彩涂料

仿瓷多彩涂料性能好，成本低，工艺简单，施工方便．叙述了该涂料的机理、配方、工艺和性能指标。

A thermally crosslinked ion-gel gated artificial synapse

We demonstrate a synaptic transistor that uses a thermally crosslinked three-dimensional network to accommodate ionic liquid to form an ion gel layer. The synaptic transistor successfully emulated important synaptic plasticity, such as paired-pulse facilitation, spike-number dependent plasticity, spike-voltage dependent plasticity, and spike-rate dependent plasticity;these responses imply successful use of the ion gel. Moreover, the device realized “OR” and “AND” logic operations, and high-pass filtering behavior. Energy consumption of the device can be reduced to sub-femtojoule level, which is below that of biological synapses. Compared with traditional physical cross-linking using block copolymers, this method provides a facile strategy to prepare ion gels with tunable properties by altering the polymers and crosslinkers,and to enormously reduce the price by replacing expensive block copolymers or eliminating additional synthesis processes. This report provides a versatile strategy for design of synaptic transistors and their applications in neuromorphic electronics.

In situ preparation of gel polymer electrolyte for lithium batteries: Progress and perspectives

The practical applications of Li-ion batteries(LIBs)are challenged by their safety concerns when using liquid electrolytes(LEs).Solid-state gel polymer electrolytes(GPEs)can address this challenge and have drawn increased attention recently.Normally,GPEs are prepared separately and then assembled into cells,which undoubtedly result in dissatisfactory solid/solid interfacial compatibility and low ionic conductivity.Fortunately,in situ GPEs are proposed to address the above challenges and simplify the preparation process.Typically,LE precursor is injected into the cells and gradually transformed into a quasisolid gel state under the conditions of thermal or chemical initiators.Consequently,the obtained in situ GPEs could fully infiltrate the electrode and better interface contact of gel electrolyte/electrode is thus inherited.In this review,the authors focus on the in situ GPEs used in lithium batteries(LBs),and summarize recent progress of the design,synthesis,and applications of in situ GPEs.Based on the different ways of triggering polymerization,there are mainly three methods:thermochemical gelation,polymerization by additional chemical initiators,and cross-linking initiated by Li O bond.Composite GPEs based on in situ solidification method are introduced as a promising strategy to improve the electrochemical performances.Finally,up-to-date research progresses are discussed,and perspectives are provided on the development and challenges of in situ GPEs to meet the requirements for their practical applications in LBs.

The recent research progress of polyphenol-derived biomaterials in wound repair

The clinical requirements for wound care are increasing daily, and the global wound dressing market is expanding;however, the research and development of new wound dressings are imminent. Natural biomolecules such as polyphenols, have been widely used in this field of vision. Owing to their unique anti-oxidative, adhesive, antibacterial and other bioactive functions, researchers have developed a series of wound dressings with excellent performance and applied them to a variety of biomaterials, such as hydrogels, nanofibers, films and scaffolds. They can effectively promote angiogenesis and fibroblast migration and proliferation, scavenge active oxygen free radicals, inhibit excessive in-flammatory reactions at wound sites and ultimately accelerate wound healing. The authors summarise the latest progress in polyphenol-derived biomaterials in skin wound repair to provide inspiration for future wound dressing research.

Solid State Polymer Electrolytes for Dye-sensitized Solar Cell

1 Introduction Over the past decade,Dye-sensitized solar cells (DSSCs) have been intensively investigated as potential alternatives to conventional inorganic photovoltaic devices due to their low production cost and high energy conversion[1-4]. This type of solar cell has achieved an impressive energy conversion efficiency of over 10%,whose electrolyte is a voltaic organic liquid solvent containing iodide/triiodide as redox couple.However,the use of a liquid electrolyte brings difficulties in the practi...