Efficient PbS quantum dots tandem solar cells through compatible interconnection layer

Lead sulfide quantum dots(PbS QDs) hold unique characteristics, including bandgap tunability, solutionprocessability etc., which make them highly applicable in tandem solar cells(TSCs). In all QD TSCs, its efficiency lags much behind to their single junction counterparts due to the deficient interconnection layer(ICL) and defective subcells. To improve TSCs performance, we developed three kinds of ICL structures based on 1.34 and 0.96 e V PbS QDs subcells. The control, 1,2-ethanedithiol capped PbS QDs(PbS-EDT)/Au/tin dioxide(SnO_(2))/zinc oxide(Zn O), utilized SnO_(2) layer to obtain high surface compactness.However, its energy level mismatch causes incomplete recombination. Bypassing it, the second ICL(PbS-EDT/Au/Zn O) removed SnO_(2) and boosted the power conversion efficiency(PCE) from 5.75% to 8.69%. In the third ICL(PbS-EDT/poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine](PTAA)/Au/Zn O), a thin layer of PTAA can effectively fill fissures on the surface of PbS-EDT and also protect the front cells from solvent penetration. This TSC obtained a PCE of 9.49% with an open circuit voltage of 0.91 V, a short circuit current density of 15.47 m A/cm~2, and a fill factor of 67.7%. To the best of our knowledge, this was the highest PCE achieved by all PbS QD TSCs reported to date. These TSCs maintained stable performance for a long working time under ambient conditions.

Silicon-based optoelectronic heterogeneous integration for optical interconnection

The performance of optical interconnection has improved dramatically in recent years.Silicon-based optoelectronic heterogeneous integration is the key enabler to achieve high performance optical interconnection,which not only provides the optical gain which is absent from native Si substrates and enables complete photonic functionalities on chip,but also improves the system performance through advanced heterogeneous integrated packaging.This paper reviews recent progress of silicon-based optoelectronic heterogeneous integration in high performance optical interconnection.The research status,development trend and application of ultra-low loss optical waveguides,high-speed detectors,high-speed modulators,lasers and 2D,2.5D,3D and monolithic integration are focused on.

Research on Scheduling Strategy of Flexible Interconnection Distribution Network Considering Distributed Photovoltaic and Hydrogen Energy Storage

Distributed photovoltaic(PV)is one of the important power sources for building a new power system with new energy as the main body.The rapid development of distributed PV has brought new challenges to the operation of distribution networks.In order to improve the absorption ability of large-scale distributed PV access to the distribution network,the AC/DC hybrid distribution network is constructed based on flexible interconnection technology,and a coordinated scheduling strategy model of hydrogen energy storage(HS)and distributed PV is established.Firstly,the mathematical model of distributed PV and HS system is established,and a comprehensive energy storage system combining seasonal hydrogen energy storage(SHS)and battery(BT)is proposed.Then,a flexible interconnected distribution network scheduling optimization model is established to minimize the total active power loss,voltage deviation and system operating cost.Finally,simulation analysis is carried out on the improved IEEE33 node,the NSGA-II algorithm is used to solve specific examples,and the optimal scheduling results of the comprehensive economy and power quality of the distribution network are obtained.Compared with the method that does not consider HS and flexible interconnection technology,the network loss and voltage deviation of this method are lower,and the total system cost can be reduced by 3.55%,which verifies the effectiveness of the proposed method.

Coordinated planning for flexible interconnection and energy storage system in low-voltage distribution networks to improve the accommodation capacity of photovoltaic

The increasing proportion of distributed photovoltaics(DPVs)and electric vehicle charging stations in low-voltage distribution networks(LVDNs)has resulted in challenges such as distribution transformer overloads and voltage violations.To address these problems,we propose a coordinated planning method for flexible interconnections and energy storage systems(ESSs)to improve the accommodation capacity of DPVs.First,the power-transfer characteristics of flexible interconnection and ESSs are analyzed.The equipment costs of the voltage source converters(VSCs)and ESSs are also analyzed comprehensively,considering the differences in installation and maintenance costs for different installation locations.Second,a bilevel programming model is established to minimize the annual comprehensive cost and yearly total PV curtailment capacity.Within this framework,the upper-level model optimizes the installation locations and capacities of the VSCs and ESSs,whereas the lower-level model optimizes the operating power of the VSCs and ESSs.The proposed model is solved using a non-dominated sorting genetic algorithm with an elite strategy(NSGA-II).The effectiveness of the proposed planning method is validated through an actual LVDN scenario,which demonstrates its advantages in enhancing PV accommodation capacity.In addition,the economic benefits of various planning schemes with different flexible interconnection topologies and different PV grid-connected forms are quantitatively analyzed,demonstrating the adaptability of the proposed coordinated planning method.

Review of trans-Mediterranean power grid interconnection:a regional roadmap towards energy sector decarbonization

Climate change is becoming an important issue in all fields of infrastructure development.Electricity plays a core role in the decarbonized energy system’s path to a regional zero-emission pattern.A well-built trans-Mediterranean backbone grid can hedge the profound evolution of regional power generation,transmission,and consumption.To date,only Turkey and the Maghreb countries(i.e.,Morocco,Algeria,and Tunisia)are connected with the Continental European Synchronous Area.Other south-and east-shore countries have insufficient interconnection infrastructures and synchronization difficulties that have proven to be major hurdles to the implementation of large-scale solar and wind projects and achievement of climate goals.This study analyzes the current trans-boundary grid interconnections and power and carbon emission portfolios in the Mediterranean region.To align with the recently launched new climate target‘Fit for 55’program and the accelerated large-scale renewables target,a holistic review of projected trans-Mediterranean grids and their market,technical,and financial obstacles of implementation was conducted.For south-and east-shore countries,major legal and regulatory barriers encompassing non-liberalized market structure,regulation gaps of taxation and transmission tariffs,and the private sector’s access rights need to be removed.Enhancement of domestic grids,substations,and harmonized grid codes and frequency,voltage,and communication technology standards among all trans-Mediterranean countries are physical prerequisites for implementing the Trans-Mediterranean Electricity Market.In addition,the mobilization of capital instruments along with private and international investments is indispensable for the realization of supranational transmission projects.As the final section of the decarbonization roadmap,the development of electric appliances,equipment,and vehicles with higher efficiency is inevitable in the decarbonized building,transportation,and industry sectors.

Power Optimization Cooperative Control Strategy for Flexible Fast Interconnection Device with Energy Storage

With the wide application of renewable energy power generation technology,the distribution network presents the characteristics of multi-source and complex structure.There are potential risks in the stability of power system,and the problem of power quality is becoming more and more serious.This paper studies and proposes a power optimization cooperative control strategy for flexible fast interconnection device with energy storage,which combines the flexible interconnection technology with the energy storage device.The primary technology is to regulate the active and reactive power of the converter.By comparing the actual power value of the converter with the reference value,the proportional integral(PI)controller is used for correction,and the current components of d and q axes are obtained and input to the converter as the reference value of the current inner loop.The control strategy in this paper can realize power mutual aid between feeders,and at the same time,the energy storage device can provide or absorb a certain amount of power for feeders,so that the power grid can realize stable operation in a certain range.

IMC-skeletons reinforced high-temperature interconnections through low-temperature TLP bonding and micron composite solders

The traditional nano-sintering or TLP techniques are generally expensive,time-consuming,and hence unsuitable for realizing practical mass production.Herein,we have developed an improved TLP process to rapidly produce IMC-skeleton structures across the bonding region by initiating a localized liquid-solid interaction among micron particles at traditional soldering temperatures.The developed IMC skeletons can reinforce solder alloys and provide remarkable mechanical stability and electrical capabilities at high temperatures.As a result,the IMC-skeleton strengthened interconnections exhibited higher thermal/electrical conductivity,lower hardness and almost doubled strength than traditional full-IMC joints,attaining 87.4 MPa and 30.2 MPa at room condition and 350℃.Meanwhile,the necessary heating time to form metallurgical bonds was shortened,one-fifth of nano-sintering and one-tenth of TLP bonding,and the material cost was significantly reduced.This proposed technique enabled the fast,low-cost manufacturing of electronics that can serve at temperatures as high as 200−350℃.Besides,the interfacial reactions among particles and the correlated phase evolution process were studied in this research.The formation mechanism of IMC skeletons was analyzed.The correlated influencing factors and their effect on the mechanical,thermal and electrical properties of joints were revealed,which may help the design and extensive uses of such techniques in various high-temperature/power applications.

A Scalable Interconnection Scheme in Many-Core Systems

Recent architectures of multi-core systems may have a relatively large number of cores that typically ranges from tens to hundreds;therefore called many-core systems.Such systems require an efficient interconnection network that tries to address two major problems.First,the overhead of power and area cost and its effect on scalability.Second,high access latency is caused by multiple cores’simultaneous accesses of the same shared module.This paper presents an interconnection scheme called N-conjugate Shuffle Clusters(NCSC)based on multi-core multicluster architecture to reduce the overhead of the just mentioned problems.NCSC eliminated the need for router devices and their complexity and hence reduced the power and area costs.It also resigned and distributed the shared caches across the interconnection network to increase the ability for simultaneous access and hence reduce the access latency.For intra-cluster communication,Multi-port Content Addressable Memory(MPCAM)is used.The experimental results using four clusters and four cores each indicated that the average access latency for a write process is 1.14785±0.04532 ns which is nearly equal to the latency of a write operation in MPCAM.Moreover,it was demonstrated that the average read latency within a cluster is 1.26226±0.090591 ns and around 1.92738±0.139588 ns for read access between cores from different clusters.

Impact of interconnections and renewable energy integration on the Philippine-Sabah Power Grid systems

This study presents a comprehensive impact analysis of the rotor angle stability of a proposed international connection between the Philippines and Sabah,Malaysia,as part of the Association of Southeast Asian Nations(ASEAN)Power Grid.This study focuses on modeling and evaluating the dynamic performance of the interconnected system,considering the high penetration of renewable sources.Power flow,small signal stability,and transient stability analyses were conducted to assess the ability of the proposed linked power system models to withstand small and large disturbances,utilizing the Power Systems Analysis Toolbox(PSAT)software in MATLAB.All components used in the model are documented in the PSAT library.Currently,there is a lack of publicly available studies regarding the implementation of this specific system.Additionally,the study investigates the behavior of a system with a high penetration of renewable energy sources.Based on the findings,this study concludes that a system is generally stable when interconnection is realized,given its appropriate location and dynamic component parameters.Furthermore,the critical eigenvalues of the system also exhibited improvement as the renewable energy sources were augmented.

Utilization of cross-regional interconnector and pumped hydro energy storage for further introduction of solar PV in Japan

The amount of solar PV installed capacity has steadily increased to 44.5 GW at the end of FY2017,since the introduction of the Feed in Tariff(FiT)to Japan in 2012.On the other hand,since the first curtailment of solar PV was conducted on October 13th,2018 in the Kyushu area,the curtailment has been frequently executed including wind power after that.In this study,cross-regional interconnector and pumped hydro energy storage(PHES)are focused on mitigating curtailment.In Japan,there are 9 electric power areas which connected each other by cross-regional interconnectors.According to the historical operation,cross-regional interconnectors were secured as emergency flexible measures,but after the implicit auction was started from October 2018,it is used on merit order.Regarding a PHES in Japan,they have been built with nuclear power plants for several decades.Because the output of nuclear power generation is constant,so the PHES is used to absorb the surplus at nighttime when the demand declines.All nuclear power plants in Japan have been shut down after the accident at the Fukushima Daiichi Nuclear Power Plant following the Great East Japan Earthquake that occurred on March 11th,2011.There are several nuclear power plants that have been restarted(9 reactors,as of August 2019).In this study,the amount of curtailment for solar PV in the Kyushu area is sent to the Chugoku area using the cross-regional interconnector(Kanmon line).Then,the PHES in the Chugoku area is pumping with low price.Because the spot price in the market is low when the curtailment is executed.After that,the PHES is generating at night with high price when the solar PV is not generating.It makes a profit by the deference for the cost of pumping and the revenue of generating by the PHES.As a calculation result,for one week from May 2nd to 8th,2019,a profit becomes 152.2 million JPY(about 1.22 million EUR).For this purpose,it is necessary to raise the operation capacity of the cross-regional interconnector up to the rated capacity with the frequency control function of solar PV instead of the capacity to keep frequency in the event of an accident.This will allow the further introduction of solar PV in Japan.

Decentralized Optimal Control and Stabilization of Interconnected Systems With Asymmetric Information

The paper addresses the decentralized optimal control and stabilization problems for interconnected systems subject to asymmetric information.Compared with previous work,a closed-loop optimal solution to the control problem and sufficient and necessary conditions for the stabilization problem of the interconnected systems are given for the first time.The main challenge lies in three aspects:Firstly,the asymmetric information results in coupling between control and estimation and failure of the separation principle.Secondly,two extra unknown variables are generated by asymmetric information(different information filtration)when solving forward-backward stochastic difference equations.Thirdly,the existence of additive noise makes the study of mean-square boundedness an obstacle.The adopted technique is proving and assuming the linear form of controllers and establishing the equivalence between the two systems with and without additive noise.A dual-motor parallel drive system is presented to demonstrate the validity of the proposed algorithm.

Optimizing Power Flow in Northern Cameroon’s Interconnected Grid: Challenges and Solutions

This paper presents an analysis of the power flow within the Northern Interconnected Grid of Cameroon. The Newton-Raphson method has been performed, known for its accuracy, under MATLAB software, to model and solve complex power flow equations. This study simulates a series of outage scenarios to evaluate the responsiveness of the grid. The results obtained underline the crucial importance of reactive power management and highlight the urgent need to consolidate the grid infrastructure of North Cameroon. To increase grid resilience and stability, the paper recommends the strategic integration of renewables and the development of interconnections with other power grids. These measures are presented as viable solutions to meet current and future energy distribution challenges, ensuring a reliable and sustainable power supply for Cameroon.

Influence of Interconnection Configuration on Thermal Dissipation of ULSI Interconnect Systems

The effects of adjacent metal layers and space between metal lines on the temperature rise of multilevel ULSI interconnect lines are investigated by modeling a three-layer interconnect. The heat dissipation of various metallization technologies concerning the metal and low-k dielectric employment is simulated in detail. The Joule heat generated in the interconnect is transferred mainly through the metal lines in each metal layer and through the path with the smallest thermal resistance in each Ield layer. The temperature rises of Al metallization are approximately pAl/pCu times higher than those of Cu metallization under the same conditions. In addition, a thermal problem in 0.13μm globe interconnects is studied for the worst case, in which there are no metal lines in the lower interconnect layers. Several types of dummy metal heat sinks are investigated and compared with regard to thermal efficiency,influence on parasitic capacitance,and optimal application by combined thermal and electrical simula- tion.

DESIGN AND IMPLEMENTATION OF A GIGABIT PER SECOND OPTICAL INTERCONNECTION DATA LINK

The interconnection network is one of the key elements of distributed computing systems such as MPP (massively parallel processing) or NOWs (network of workstations).In this paper,a high speed optical interconnection data link which has been designed and implemented is presented.Using TDM (time division multiplexing),virtual parallel synchronous data transmission between the PCI buses of two computers has been achieved.The maximum data rate of the link is 1 250 Mbit/s,and the communication distance of link is more than 600 m using multi mode fibers.The design method of the high frequency electrical signals on the network interface card has been analyzed,and the efficient data transmission bandwidth of the link in different transmission modes has been tested and analyzed.

Dynamic load balancing based on restricted multicast tree in triplet-based hierarchical interconnection network

To solve the load balancing problem in a triplet-based hierarchical interconnection network（THIN） system, a dynamic load balancing （DLB）algorithm--THINDLBA, which adopts multicast tree （MT）technology to improve the efficiency of interchanging load information, is presented. To support the algorithm, a complete set of DLB messages and a schema of maintaining DLB information in each processing node are designed. The load migration request messages from the heavily loaded node （HLN）are spread along an MT whose root is the HLN. And the lightly loaded nodes（LLNs） covered by the MT are the candidate destinations of load migration; the load information interchanged between the LLNs and the HLN can be transmitted along the MT. So the HLN can migrate excess loads out as many as possible during a one time execution of the THINDLBA, and its load state can be improved as quickly as possible. To avoid wrongly transmitted or redundant DLB messages due to MT overlapping, the MT construction is restricted in the design of the THINDLBA. Through experiments, the effectiveness of four DLB algorithms are compared, and the results show that the THINDLBA can effectively decrease the time costs of THIN systems in dealing with large scale computeintensive tasks more than others.

Accurate Interconnection Length and Routing Channel Width Estimates for FPGAs

We study the problem of the prediction of interconnection dimensions for FPGAs, including estimating interconnection length and channel width. Experimental results show that our estimates are more accurate than those of existing methods.

Development of Network Interconnection in China

This paper introduces the current situation of China power industry and interconnection, the necessity to develop interconnection, the principle of nationwide interconnection and the key technologies to be studiedinclude HVDC and FACTS. The paper also discusses thefeasibility of 750 kV to be used in the northwest.regionand to speed up research and development of nighervoltage level in other regions of China, as well as scl-ence and technical innovation for transmission and dis-tribution projects.

USING WAVELENGTH ROUTING IN THE OPTICAL INTERCONNECTION COMPUTER NETWORK

The wavelength routing technology applied to computer interconnection networks is introduced in this paper.By analyzing the relation between wavelength and network routing,we describe a concept of wavelength used as network IP address,and propose a wavelength routing topology to extend the scale of a network and realize the scalability of the network.Moreover,a twin wavelength ring network that is being developed in our laboratory to implement and test the function of wavelength routing is presented,and the main units of the twin wavelength ring network are presented also.According to the testing results based on a single wavelength ring network,it proves that the optical interconnection technology is a perfect technology to provide enough communication bandwidth for computer network.

Cross-regional emergency scheduling planning for petroleum based on the supernetwork model

Petroleum, the most important energy source in the world, plays an essential role in securing economic development. If a petroleum shortage happens, it will severely disrupt production and life. Cross-regional emergency scheduling can effectively alleviate a petroleum shortage and further enhance the efficiency of the emergency response. Considering the general lack of focus on cross-regional petroleum dispatching management, we propose a three-layer emergency scheduling network for petroleum based on a supernetwork model that can increase the regional emergency correlation by adding a transfer management process. Then, we compare the total demand for petroleum and the emergency costs considered in the petroleum emergency scheduling supernetwork model（the single-region and the cross-region scenarios）.The result shows that the cross-regional emergency scheduling pattern can effectively enhance the efficiency of the emergency preparations and reduce the emergency costs in most cases. However, when the vulnerabilities in the crossregional link grow or the regional linkage decreases, the effect of single-regional scheduling is better. In addition, the advantages of the cross-regional emergency scheduling network will be strengthened with an increase in its maximum emergency capability. Nonetheless, this advantage will disappear when the petroleum demand in the crisis layer reaches the maximum emergency response capacity. Finally, according to the comparative analysis simulation among scenarios,certain strategic policy recommendations are suggested to improve the petroleum emergency scheduling ability in regions.These recommendations include strengthening the cross-regional coordination mechanism, increasing the modes of petroleum transportation and enhancing the carrying capacity of regional emergency routes.

Consensus of Second-order Multi-agent Systems with Nonsymmetric Interconnection and Heterogeneous Delays

In this paper, a consensus algorithm of multi-agent second-order dynamical systems with nonsymmetric interconnection and heterogeneous delays is studied. With the hypothesis of directed weighted topology graph with a globally reachable node, decentralized consensus condition is obtained by applying generalized Nyquist criterion. For the systems with both communication and input delays, it is shown that the consensus condition is dependent on input delays but independent of communication delays.