Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components direct...Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components directly affects manufacturing,operation and storage performances of the umbilical.For the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage requirements.Considering the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional components.Then,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent method.Genetic algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout solution.The feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate solution.Finally,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is higher.Meanwhile,the multi-layering strategy is effective and feasible.The design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.展开更多
Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction...Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction technology, a double-layer-plasma-based metasurface—composed of a checkerboard metasurface, a double-layer plasma and an air gap between them—was investigated. Based on the principle of backscattering cancellation, we designed a checkerboard metasurface composed of different artificial magnetic conductor units;the checkerboard metasurface can reflect vertically incident electromagnetic(EM) waves in four different inclined directions to reduce the RCS. Full-wave simulations confirm that the doublelayer-plasma-based metasurface can improve the RCS reduction effect of the metasurface and the plasma. This is because in a band lower than the working band of the metasurface, the RCS reduction effect is mainly improved by the plasma layer. In the working band of the metasurface,impedance mismatching between the air gap and first plasma layer and between first and second plasma layers cause the scattered waves to become more dispersed, so the propagation path of the EM waves in the plasma becomes longer, increasing the absorption of the EM waves by the plasma. Thus, the RCS reduction effect is enhanced. The double-layer-plasma-based metasurface can be insensitive to the polarization of the incoming EM waves, and can also maintain a satisfactory RCS reduction band when the incident waves are oblique.展开更多
Dyslipidemia is a disorder where abnormally lipid concentrations circulate in the bloodstream. The disorder is common in type 2 diabetics (T2D) and is linked with T2D comorbidities, particularly cardiovascular disease...Dyslipidemia is a disorder where abnormally lipid concentrations circulate in the bloodstream. The disorder is common in type 2 diabetics (T2D) and is linked with T2D comorbidities, particularly cardiovascular disease. Dyslipidemia in T2D is typically characterized by elevated plasma triglyceride and low high-density lipoprotein cholesterol (HDL-C) levels. There is a significant gap in the literature regarding dyslipidemia in rural parts of Africa, where lipid profiles may not be captured through routine surveillance. This study aimed to characterize the prevalence and demo-graphic profile of dyslipidemia in T2D in the rural community of Ganadougou, Mali. We performed a cross-sectional study of 104 subjects with T2D in Ganadougou between November 2021 and March 2022. Demographic and lipid profiles were collected through cross-sectional surveys and serological analyses. The overall prevalence of dyslipidemia in T2D patients was 87.5% (91/104), which did not differ by sex (P = .368). High low-density lipoprotein cholesterol (LDL-C) was the most common lipid abnormality (78.9%, [82/104]). Dyslipidemia was associated with age and hypertension status (P = .013 and.036, respectively). High total and high LDL-C parameters were significantly associated with hypertension (P = .029 and .006, respectively). In low-resource settings such as rural Mali, there is a critical need to improve infrastructure for routine dyslipidemia screening to guide its prevention and intervention approaches. The high rates of dyslipidemia observed in Gandadougou, consistent with concomitant increases in cardiovascular diseases in Africa suggest that lipid profile assessments should be incorporated into routine medical care for T2D patients in African rural settings.展开更多
BACKGROUND Colorectal polyps(CPs)are frequently occurring abnormal growths in the colorectum,and are a primary precursor of colorectal cancer(CRC).The triglyceride-glucose(TyG)index is a novel marker that assesses met...BACKGROUND Colorectal polyps(CPs)are frequently occurring abnormal growths in the colorectum,and are a primary precursor of colorectal cancer(CRC).The triglyceride-glucose(TyG)index is a novel marker that assesses metabolic health and insulin resistance,and has been linked to gastrointestinal cancers.AIM To investigate the potential association between the TyG index and CPs,as the relation between them has not been documented.METHODS A total of 2537 persons undergoing a routine health physical examination and colonoscopy at The First People's Hospital of Kunshan,Jiangsu Province,China,between January 2020 and December 2022 were included in this retrospective cross-sectional study.After excluding individuals who did not meet the eligibility criteria,descriptive statistics were used to compare characteristics between patients with and without CPs.Logistic regression analyses were conducted to determine the associations between the TyG index and the prevalence of CPs.The TyG index was calculated using the following formula:Ln[triglyceride(mg/dL)×glucose(mg/dL)/2].The presence and types of CPs was determined based on data from colonoscopy reports and pathology reports.RESULTS A nonlinear relation between the TyG index and the prevalence of CPs was identified,and exhibited a curvilinear pattern with a cut-off point of 2.31.A significant association was observed before the turning point,with an odds ratio(95% confidence interval)of 1.70(1.40,2.06),P<0.0001.However,the association between the TyG index and CPs was not significant after the cut-off point,with an odds ratio(95% confidence interval)of 0.57(0.27,1.23),P=0.1521.CONCLUSION Our study revealed a curvilinear association between the TyG index and CPs in Chinese individuals,suggesting its potential utility in developing colonoscopy screening strategies for preventing CRC.展开更多
BACKGROUND Healthcare workers(HCWs)are at increased risk of contracting coronavirus disease 2019(COVID-19)as well as worsening mental health problems and insomnia.These problems can persist for a long period,even afte...BACKGROUND Healthcare workers(HCWs)are at increased risk of contracting coronavirus disease 2019(COVID-19)as well as worsening mental health problems and insomnia.These problems can persist for a long period,even after the pandemic.However,less is known about this topic.AIM To analyze mental health,insomnia problems,and their influencing factors in HCWs after the COVID-19 pandemic.METHODS This multicenter cross-sectional,hospital-based study was conducted from June 1,2023 to June 30,2023,which was a half-year after the end of the COVID-19 emergency.Region-stratified population-based cluster sampling was applied at the provincial level for Chinese HCWs.Symptoms such as anxiety,depression,and insomnia were evaluated by the Generalized Anxiety Disorder-7,Patient Health Questionnaire-9,and Insomnia Severity Index.Factors influencing the symptoms were identified by multivariable logistic regression.RESULTS A total of 2000 participants were invited,for a response rate of 70.6%.A total of 1412 HCWs[618(43.8%)doctors,583(41.3%)nurses and 211(14.9%)nonfrontline],254(18.0%),231(16.4%),and 289(20.5%)had symptoms of anxiety,depression,and insomnia,respectively;severe symptoms were found in 58(4.1%),49(3.5%),and 111(7.9%)of the participants.Nurses,female sex,and hospitalization for COVID-19 were risk factors for anxiety,depression,and insomnia symptoms;moreover,death from family or friends was a risk factor for insomnia symptoms.During the COVID-19 outbreak,most[1086(76.9%)]of the participating HCWs received psychological interventions,while nearly all[994(70.4%)]of them had received public psychological education.Only 102(7.2%)of the HCWs received individual counseling from COVID-19.CONCLUSION Although the mental health and sleep problems of HCWs were relieved after the COVID-19 pandemic,they still faced challenges and greater risks than did the general population.Identifying risk factors would help in providing targeted interventions.In addition,although a major proportion of HCWs have received public psychological education,individual interventions are still insufficient.展开更多
Background: Infertility and abortion are significant reproductive health concerns globally, impacting individuals' well-being and healthcare systems. In Saudi Arabia, cultural, social, and religious factors influe...Background: Infertility and abortion are significant reproductive health concerns globally, impacting individuals' well-being and healthcare systems. In Saudi Arabia, cultural, social, and religious factors influence perceptions and management of these issues, necessitating research to understand the patterns and associated factors. Study Aim: This cross-sectional study aimed to investigate the patterns of infertility and abortion among 458 women in Saudi Arabia, focusing on demographic profiles, reproductive histories, medical conditions, and lifestyle factors. Methodology: Participants were recruited from healthcare facilities, and data on age, BMI, reproductive history, medical conditions, assisted reproduction methods, and lifestyle behaviors were collected. Statistical analyses, including chi-square tests, were conducted to examine associations between variables. Results: The majority of participants were aged 30 - 39 years (47.4%), with 76.9% experiencing secondary infertility. Among those with offspring (76.9%), 31% reported using assisted reproduction methods, primarily ovarian stimulators (54.2%). Abortion history was reported by 39.5% of participants. Significant associations were found between age and infertility type (X2 = 5.8, p = 0.054), having offspring and infertility type (X2 = 458.0, p = 0.001), menstrual irregularity and infertility type (X2 = 11.4, p = 0.001), and abortion history and delayed fertility (X2 = 10.4, p = 0.001). Conclusion: Our study reveals significant associations between demographic, medical, and lifestyle factors with infertility patterns and abortion history among Saudi women. These findings emphasize the need for tailored interventions addressing medical conditions, age-related factors, and access to reproductive healthcare services.展开更多
Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of l...Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.展开更多
Double differential cross section (DDCS) of First-Born approximation is calcu-lated for the ionization of metastable 3d-state hydrogen atoms by electron impact energy at 150 eV and 250 eV. A multiple scattering theory...Double differential cross section (DDCS) of First-Born approximation is calcu-lated for the ionization of metastable 3d-state hydrogen atoms by electron impact energy at 150 eV and 250 eV. A multiple scattering theory is applied in the present study. The present results are compared with the other related the-oretical results for the ionization of hydrogen atoms from different metastable states and ground-state experimental results. The findings demonstrate a strong qualitative agreement with the existing results. The obtained results have an extensive scope for further study of such an ionization process.展开更多
Objective:To study the prevalence of anemia,the proportion of hemoglobin(Hb)levels,the treatment methods,and the influencing factors of Hb levels in maintenance hemodialysis(MHD)and peritoneal dialysis patients.Method...Objective:To study the prevalence of anemia,the proportion of hemoglobin(Hb)levels,the treatment methods,and the influencing factors of Hb levels in maintenance hemodialysis(MHD)and peritoneal dialysis patients.Methods:In this study,602 patients with maintenance hemodialysis and continuous ambulatory peritoneal dialysis were enrolled from December 2020 to December 2022 in our hospital,and their medical records were collected and summarized.The main contents included the patient’s gender,age,primary disease,dialysis duration,dialysis method,the use of erythropoietic stimulating agents(ESA),intravenous iron,and laboratory tests.A Hb index exceeding 110 g/L was set as the standard for the prevalence of anemia.Results:The rate of anemia in patients undergoing blood purification was 83%.The proportion of ESA use was 84.1%,and the proportion of iron use was 76.7%,of which the proportion of intravenous iron used was 17.0%,and the proportion of folic acid used was 28.3%.Conclusion:The incidence of anemia in MHD patients was relatively high,with a low proportion of patients reaching the standard Hb levels.Risk factors include albumin(ALB)levels,iron storage,white blood cells,C-reactive protein,cholesterol,etc.Nutritional support,iron supplementation,and prevention of micro-inflammatory reactions can effectively promote the improvement of Hb indicators in dialysis patients to prevent anemia.展开更多
Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionizati...Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionization collision probability model.The function had three parameters:the first ionization potential energy,A_(α),and B_(α).A_(α)and B_(α)were related to the molecule symmetry and size.The polarization of molecules could characterize the molecule symmetry.The multi-layer molecular cross-section(MMCS)was proposed to describe the contributions of electrons and molecule radius on different molecule surfaces to collisions.A prediction model of the ionization cross-section was also proposed based on Aα.The molecule parameters were calculated by the Becke3–Lee–Yang–Parr(B3LYP)method and the 6–311G**basis set.We used available data of 30 and 23 gases,respectively,to build the prediction models of reduced Townsend ionization coefficients and ionization cross-sections.The relationships between the molecular parameters Aαand Bαand the ionization cross-section were built up via nonlinear fittings.The determination coefficients R^(2)of Aα,Bα,and the ionization cross-section were 0.877,0.887,and 0.838,respectively.The results showed that the accuracy of models was positively correlated with the molecule symmetry and reduced electric field.This was mainly related to the accuracy of the MMCS model in predicting Aα.The MMCS model needed to be improved to describe the collision direction selectivity caused by the molecule asymmetry.Under a high reduced electric field,that error of Aαhad less influence on the prediction results.However,the prediction results for single atoms with high symmetry were poor.This may be due to the absolute error of the model close to single atoms’reduced Townsend ionization coefficients.The models could provide the basis for gas insulation prediction and discharge calculations,especially for symmetric molecules under a high electric field.展开更多
To predict the soft error rate for applications, it is essential to study the energy dependence of the single-event-upset(SEU) cross-section. In this work, we present a direct measurement of the SEU cross-section with...To predict the soft error rate for applications, it is essential to study the energy dependence of the single-event-upset(SEU) cross-section. In this work, we present a direct measurement of the SEU cross-section with the Back-n white neutron source at the China Spallation Neutron Source. The measured cross section is consistent with the soft error data from the manufacturer and the result suggests that the threshold energy of the SEU is about 0.5 Me V, which confirms the statement in Iwashita’s report that the threshold energy for neutron soft error is much below that of the(n, α) cross-section of silicon.In addition, an index of the effective neutron energy is suggested to characterize the similarity between a spallation neutron beam and the standard atmospheric neutron environment.展开更多
Objective To assess the test-retest reliability and criterion validity of the Simplified Chinese-character version of the International Physical Activity Questionnaire Long form (IPAC).-L) in urban community-dwelli...Objective To assess the test-retest reliability and criterion validity of the Simplified Chinese-character version of the International Physical Activity Questionnaire Long form (IPAC).-L) in urban community-dwelling adults in Hanghzou, China. Methods A total of 158 eligible participants aged 25-59 years from 6 neighbourhoods in two central districts of Hangzhou completed the IPAQ-L questionnaire twice within a 7-day interval. Half of the subjects wore pedometers during the first 7 days. Test-retest reliability was examined by comparing the first (Day 1) and the second (Day 9) survey of IPAQ-L Criterion validity was assessed by comparing IPAO,-L with pedometer data. Results Modest to good test-retest reliability was found with intraclass correlation coefficients of 0.67 for total PA, 0.37 to 0.73 for specific dimensions, and 0.56 to 0.71 for different intensities of PA. Total PA measured by IPAO.-L was moderately correlated with exercise levels (partial r = 0.27, P = 0.020) and walking distance (partial r = 0.31, P = 0.007), which were measured by a pedometer, after adjusting for gender, age, educational attainment and employment status. Conclusion Our results indicate that the IPAO.-L is a reliable and validated measure for assessing physica activity levels in this population and possibly the adult population in other mainland Chinese cities.展开更多
The three dimensional variable cross-section roll forming is a kind of new metal forming technology which combines large forming force,multi-axis linkage movement and space synergic movement,and the sequential synergi...The three dimensional variable cross-section roll forming is a kind of new metal forming technology which combines large forming force,multi-axis linkage movement and space synergic movement,and the sequential synergic movement of the ganged roller group is used to complete the metal sheet forming according to the shape of the complicated and variable forming part data.The control system should meet the demands of quick response to the test requirements of the product part.A new kind of real time data driving multi-axis linkage and synergic movement control strategy of 3D roll forming is put forward in the paper.In the new control strategy,the forming data are automatically generated according to the shape of the parts,and the multi-axis linkage movement together with cooperative motion among the six stands of the 3D roll forming machine is driven by the real-time information,and the control nodes are also driven by the forming data.The new control strategy is applied to a 48axis 3D roll forming machine developed by our research center,and the control servo period is less than 10ms.A forming experiment of variable cross section part is carried out,and the forming precision is better than±0.5mm by the control strategy.The result of the experiment proves that the control strategy has significant potentiality for the development of 3D roll forming production line with large scale,multi-axis ganged and synergic movement.展开更多
Large Eddy Simulation(LES)has been employed for the investigation of supersonic flow characteristics in five ducts with varying cross-sectional geometries.The numerical results reveal that flow channel configurations ...Large Eddy Simulation(LES)has been employed for the investigation of supersonic flow characteristics in five ducts with varying cross-sectional geometries.The numerical results reveal that flow channel configurations exert a considerable influence on the mainstream flow and the near-wall flow behavior.In contrast to straight ducts,square-to-circular and rectangular-to-circular ducts exhibit thicker boundary layers and a greater presence of vortex structures.Given the same inlet area,rectangular-to-circular ducts lead to higher flow drag force and total pressure loss than square-to-circular ducts.Characterized by the substantial flow separation and shock waves,the"S-shaped duct shows significant vertically-asymmetric characteristics.展开更多
Cross-section deformation is one of important factors affecting the quality of tube formation, and the tube's capability of transporting liquid and gas will be reduced because of the cross-section ellipse deformation...Cross-section deformation is one of important factors affecting the quality of tube formation, and the tube's capability of transporting liquid and gas will be reduced because of the cross-section ellipse deformation due to the effect of shear load in plastic bending process. When the tube is bent, the extrados-wall bears the tension stress and the intrados-wall bears the compression stress, synchronously the cross-section is affected by the circumferential stress. According to the above, the distribution function and curve of tangential stress can be obtained according to force balance differential equations on circumferential direction and Trasca rule. Subsequently the real state and virtual state moment equations were established, a new method was presented adopting the virtual principle of deformation system to calculate the x-axis and y-axis displacement of arbitrary point on cross-section. So the major and minor axes of deformed cross-section can be calculated according to the displacements of each point, and the variety value of major and minor axes will be obtained further. Finally the theoretical calculating result is compared with NC tube rotary-bending experiment results to verify the rationality of theoretical analysis, and the cross-section deformation rule of thin-walled tube can be received.展开更多
BACKGROUND Patients with inflammatory bowel diseases(IBDs)generally have poor knowledge,attitude,and practice of their disease,while the data from China are lacking.AIM To address this knowledge disparity among Chines...BACKGROUND Patients with inflammatory bowel diseases(IBDs)generally have poor knowledge,attitude,and practice of their disease,while the data from China are lacking.AIM To address this knowledge disparity among Chinese patients with IBD.METHODS This web-based,cross-sectional study was conducted on a cohort of IBD patients who visited the Second Affiliated Hospital of Wenzhou Medical University between December 2022 and February 2023.Their socio-demographic information and the knowledge,attitude,and practice scores were collected and estimated using a self-designed questionnaire.Pearson’s correlation analysis was used to determine the pairwise correlations among knowledge,attitude,and practice scores.A multivariate logistic regression analysis was further performed to determine the independent factors associated with their knowledge,attitude,and practice scores.RESULTS A total of 353 patients(224 males)with IBD completed the questionnaires.The mean knowledge,attitude,and practice scores were 10.05±3.46(possible range:0-14),41.58±5.23(possible range:0-56),44.20±7.39(possible range:0-56),respectively,indicating good knowledge,positive attitude,and proactive practice toward IBD.Pearson’s correlation analysis showed that the knowledge score had significant positive correlations with the attitude score(r=0.371,P<0.001)and practice score(r=0.100,P<0.001).The attitude score had a significant positive correlation with the practice score(r=0.452,P<0.001).Moreover,multivariate logistic regression analysis showed that aged 30-40 years[odds ratio(OR)=4.06,95%confidence interval(CI):1.04-15.82,P=0.043],middle school education(OR=3.98,95%CI:1.29-12.33,P=0.017),high school/technical secondary school education(OR=14.06,95%CI:3.92-50.38,P<0.001),and junior college/bachelor’s degree and above education(OR=15.20,95%CI:4.15-55.650,P<0.001)were independently associated with good knowledge.The higher knowledge score was independently associated with a positive attitude(OR=1.23,95%CI:1.11-1.36,P<0.001).The higher attitude score was independently associated with proactive practice(OR=1.20,95%CI:1.11-1.30,P<0.001).CONCLUSION Chinese patients with IBD might have good knowledge,a positive attitude,and proactive practice toward their disease.However,a small number of specific items require education.展开更多
In modem manufacturing, a new type of sheet metal part with step cross-section in both inner hole and outer edge is proposed. The traditional stamping separating processes can only produce sheet metal part with vertic...In modem manufacturing, a new type of sheet metal part with step cross-section in both inner hole and outer edge is proposed. The traditional stamping separating processes can only produce sheet metal part with vertical cross-section. According to the latest developing theory and potential of cold pressure forming: combination of pressure and cold forging, a new flow control forming of sheet metal(FCF) is excogitated based on blanking process of general stamping and combined with cold forging processes such as extrusion and coining, etc, which is aiming at the above-mentioned new type of sheet metal part. With utilization of this new process, the new type of sheet metal parts can be manufactured. In order to shorten the testing period, the numerical simulation was carried out by using DEFORM-3D software, and both deformation and mechanics rules were analyzed. Based on the simulation, both punching part and blanked parts of this new type were successfully developed. Then a new conception of optimal distance between the step walls of inner hole and outside edge was proposed and the design principle for its numerical value was inferred. Furthermore, a mold set for combination of stamping & cold forging was designed and manufactured, by which the technologic experiments were taken for validation with Aluminum plate of thickness 2.35 mm for power battery cover board, which verified the principle of the distance between the step walls. The research of cold pressure forming of thin sheet metal with step cross-section is significant, not only to the development of modem mechanical manufacture, but also to metal plastic forming science.展开更多
Background:Depression and anxiety are highly prevalent among adolescents and have multiple negative effects on their physical and mental health.While exercise can reduce the symptoms of depression and anxiety,the rela...Background:Depression and anxiety are highly prevalent among adolescents and have multiple negative effects on their physical and mental health.While exercise can reduce the symptoms of depression and anxiety,the rela-tionship between mental disorders among American university students has been rarely reported.Accordingly,this study aimed to explore the association between exercise,depression and anxiety among American university students in the 2018–2019 academic year.Methods:In this cross-sectional study,the association between exercise,depression and anxiety was investigated in a large representative sample of American university students.In the 2018–2019 academic year,university students aged 18+years old from 79 institutions participated in this school-based study.The questionnaire included measurements of demographic characteristics,exercise,and validated screen instructions for depression(PHQ-9)and anxiety(GAD-7).The multivariable logistic regression model was applied to explore the association between exercise,depression and anxiety.Results:A total of 62026 indivi-duals(31.9%males)participated in this survey,and the prevalence of exercising at least 5 h each day was 24.6%.The prevalence of depression and anxiety was 25.7%and 22.3%,respectively.In the multivariable logistic regres-sion model,compared to exercise at least 5 h daily,participants whose exercise less than 1 h daily(OR=1.31[1.29,1.33],p<0.05),2 to 3 h daily(OR=1.13[1.11,1.15],p<0.05),3 to 4 h daily(OR=1.04[1.02,1.06],p<0.05),were correlated with greater odds of depression,while exercise less than 1 h daily(OR=1.23[1.21,1.25],p<0.05),2 to 3 h daily(OR=1.10[1.08,1.12],p<0.05)were significantly correlated with great-er odds of anxiety.Conclusion:Higher levels of exercise are associated with lower risk of depression and anxiety among American university students.Community and school interventions should focus on increasing exercise participation in university populations to promote both physical and mental health.展开更多
Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode ...Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode shapes,and structure-borne noise in such systems are investigated in this study.The results demonstrate that the maximum displacement and equivalent stress are located in the part with variable cross-sectional area.The aver-age excitation force on theflow channel wall increases with theflow velocity.The maximum excitation force occurs in the range of 0–20 Hz,and then it decreases gradually in the range of 20–1000 Hz.Additionally,as theflow velocity rises from 1 to 3 m/s,the overall sound pressure level associated with theflow-induced noise grows from 49.37 to 66.37 dB.Similarly,the overall sound pressure level associated with the structure-borne noise rises from 40.27 to 72.20 dB.When theflow velocity is increased,the increment of the structure-borne noise is higher than that of theflow-induced noise.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52001088,52271269,U1906233)the Natural Science Foundation of Heilongjiang Province(Grant No.LH2021E050)+2 种基金the State Key Laboratory of Ocean Engineering(Grant No.GKZD010084)Liaoning Province’s Xing Liao Talents Program(Grant No.XLYC2002108)Dalian City Supports Innovation and Entrepreneurship Projects for High-Level Talents(Grant No.2021RD16)。
文摘Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components directly affects manufacturing,operation and storage performances of the umbilical.For the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage requirements.Considering the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional components.Then,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent method.Genetic algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout solution.The feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate solution.Finally,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is higher.Meanwhile,the multi-layering strategy is effective and feasible.The design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.
基金supported in part by the China Postdoctoral Science Foundation (No. 2020M673341)in part by the Natural Science Basic Research Program of Shaanxi (No.2023-JC-YB-549)+1 种基金in part by National Natural Science Foundation of China (Nos. 62371375 and 62371372)Innovation Capability Support Program of Shaanxi (No. 2022TD-37)。
文摘Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction technology, a double-layer-plasma-based metasurface—composed of a checkerboard metasurface, a double-layer plasma and an air gap between them—was investigated. Based on the principle of backscattering cancellation, we designed a checkerboard metasurface composed of different artificial magnetic conductor units;the checkerboard metasurface can reflect vertically incident electromagnetic(EM) waves in four different inclined directions to reduce the RCS. Full-wave simulations confirm that the doublelayer-plasma-based metasurface can improve the RCS reduction effect of the metasurface and the plasma. This is because in a band lower than the working band of the metasurface, the RCS reduction effect is mainly improved by the plasma layer. In the working band of the metasurface,impedance mismatching between the air gap and first plasma layer and between first and second plasma layers cause the scattered waves to become more dispersed, so the propagation path of the EM waves in the plasma becomes longer, increasing the absorption of the EM waves by the plasma. Thus, the RCS reduction effect is enhanced. The double-layer-plasma-based metasurface can be insensitive to the polarization of the incoming EM waves, and can also maintain a satisfactory RCS reduction band when the incident waves are oblique.
文摘Dyslipidemia is a disorder where abnormally lipid concentrations circulate in the bloodstream. The disorder is common in type 2 diabetics (T2D) and is linked with T2D comorbidities, particularly cardiovascular disease. Dyslipidemia in T2D is typically characterized by elevated plasma triglyceride and low high-density lipoprotein cholesterol (HDL-C) levels. There is a significant gap in the literature regarding dyslipidemia in rural parts of Africa, where lipid profiles may not be captured through routine surveillance. This study aimed to characterize the prevalence and demo-graphic profile of dyslipidemia in T2D in the rural community of Ganadougou, Mali. We performed a cross-sectional study of 104 subjects with T2D in Ganadougou between November 2021 and March 2022. Demographic and lipid profiles were collected through cross-sectional surveys and serological analyses. The overall prevalence of dyslipidemia in T2D patients was 87.5% (91/104), which did not differ by sex (P = .368). High low-density lipoprotein cholesterol (LDL-C) was the most common lipid abnormality (78.9%, [82/104]). Dyslipidemia was associated with age and hypertension status (P = .013 and.036, respectively). High total and high LDL-C parameters were significantly associated with hypertension (P = .029 and .006, respectively). In low-resource settings such as rural Mali, there is a critical need to improve infrastructure for routine dyslipidemia screening to guide its prevention and intervention approaches. The high rates of dyslipidemia observed in Gandadougou, consistent with concomitant increases in cardiovascular diseases in Africa suggest that lipid profile assessments should be incorporated into routine medical care for T2D patients in African rural settings.
基金Supported by Suzhou Municipal Science and Technology Program of China,No.SKJY2021012.
文摘BACKGROUND Colorectal polyps(CPs)are frequently occurring abnormal growths in the colorectum,and are a primary precursor of colorectal cancer(CRC).The triglyceride-glucose(TyG)index is a novel marker that assesses metabolic health and insulin resistance,and has been linked to gastrointestinal cancers.AIM To investigate the potential association between the TyG index and CPs,as the relation between them has not been documented.METHODS A total of 2537 persons undergoing a routine health physical examination and colonoscopy at The First People's Hospital of Kunshan,Jiangsu Province,China,between January 2020 and December 2022 were included in this retrospective cross-sectional study.After excluding individuals who did not meet the eligibility criteria,descriptive statistics were used to compare characteristics between patients with and without CPs.Logistic regression analyses were conducted to determine the associations between the TyG index and the prevalence of CPs.The TyG index was calculated using the following formula:Ln[triglyceride(mg/dL)×glucose(mg/dL)/2].The presence and types of CPs was determined based on data from colonoscopy reports and pathology reports.RESULTS A nonlinear relation between the TyG index and the prevalence of CPs was identified,and exhibited a curvilinear pattern with a cut-off point of 2.31.A significant association was observed before the turning point,with an odds ratio(95% confidence interval)of 1.70(1.40,2.06),P<0.0001.However,the association between the TyG index and CPs was not significant after the cut-off point,with an odds ratio(95% confidence interval)of 0.57(0.27,1.23),P=0.1521.CONCLUSION Our study revealed a curvilinear association between the TyG index and CPs in Chinese individuals,suggesting its potential utility in developing colonoscopy screening strategies for preventing CRC.
文摘BACKGROUND Healthcare workers(HCWs)are at increased risk of contracting coronavirus disease 2019(COVID-19)as well as worsening mental health problems and insomnia.These problems can persist for a long period,even after the pandemic.However,less is known about this topic.AIM To analyze mental health,insomnia problems,and their influencing factors in HCWs after the COVID-19 pandemic.METHODS This multicenter cross-sectional,hospital-based study was conducted from June 1,2023 to June 30,2023,which was a half-year after the end of the COVID-19 emergency.Region-stratified population-based cluster sampling was applied at the provincial level for Chinese HCWs.Symptoms such as anxiety,depression,and insomnia were evaluated by the Generalized Anxiety Disorder-7,Patient Health Questionnaire-9,and Insomnia Severity Index.Factors influencing the symptoms were identified by multivariable logistic regression.RESULTS A total of 2000 participants were invited,for a response rate of 70.6%.A total of 1412 HCWs[618(43.8%)doctors,583(41.3%)nurses and 211(14.9%)nonfrontline],254(18.0%),231(16.4%),and 289(20.5%)had symptoms of anxiety,depression,and insomnia,respectively;severe symptoms were found in 58(4.1%),49(3.5%),and 111(7.9%)of the participants.Nurses,female sex,and hospitalization for COVID-19 were risk factors for anxiety,depression,and insomnia symptoms;moreover,death from family or friends was a risk factor for insomnia symptoms.During the COVID-19 outbreak,most[1086(76.9%)]of the participating HCWs received psychological interventions,while nearly all[994(70.4%)]of them had received public psychological education.Only 102(7.2%)of the HCWs received individual counseling from COVID-19.CONCLUSION Although the mental health and sleep problems of HCWs were relieved after the COVID-19 pandemic,they still faced challenges and greater risks than did the general population.Identifying risk factors would help in providing targeted interventions.In addition,although a major proportion of HCWs have received public psychological education,individual interventions are still insufficient.
文摘Background: Infertility and abortion are significant reproductive health concerns globally, impacting individuals' well-being and healthcare systems. In Saudi Arabia, cultural, social, and religious factors influence perceptions and management of these issues, necessitating research to understand the patterns and associated factors. Study Aim: This cross-sectional study aimed to investigate the patterns of infertility and abortion among 458 women in Saudi Arabia, focusing on demographic profiles, reproductive histories, medical conditions, and lifestyle factors. Methodology: Participants were recruited from healthcare facilities, and data on age, BMI, reproductive history, medical conditions, assisted reproduction methods, and lifestyle behaviors were collected. Statistical analyses, including chi-square tests, were conducted to examine associations between variables. Results: The majority of participants were aged 30 - 39 years (47.4%), with 76.9% experiencing secondary infertility. Among those with offspring (76.9%), 31% reported using assisted reproduction methods, primarily ovarian stimulators (54.2%). Abortion history was reported by 39.5% of participants. Significant associations were found between age and infertility type (X2 = 5.8, p = 0.054), having offspring and infertility type (X2 = 458.0, p = 0.001), menstrual irregularity and infertility type (X2 = 11.4, p = 0.001), and abortion history and delayed fertility (X2 = 10.4, p = 0.001). Conclusion: Our study reveals significant associations between demographic, medical, and lifestyle factors with infertility patterns and abortion history among Saudi women. These findings emphasize the need for tailored interventions addressing medical conditions, age-related factors, and access to reproductive healthcare services.
基金supported by the National Natural Science Foundation of China(No.12065003)the Guangxi Key R&D Project(2023AB07029)+1 种基金the Scientific Research and Technology Development Project of Guilin(20210104-2)the Central Government Guides Local Scientific and Technological Development Funds of China(Guike ZY22096024)。
文摘Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.
文摘Double differential cross section (DDCS) of First-Born approximation is calcu-lated for the ionization of metastable 3d-state hydrogen atoms by electron impact energy at 150 eV and 250 eV. A multiple scattering theory is applied in the present study. The present results are compared with the other related the-oretical results for the ionization of hydrogen atoms from different metastable states and ground-state experimental results. The findings demonstrate a strong qualitative agreement with the existing results. The obtained results have an extensive scope for further study of such an ionization process.
文摘Objective:To study the prevalence of anemia,the proportion of hemoglobin(Hb)levels,the treatment methods,and the influencing factors of Hb levels in maintenance hemodialysis(MHD)and peritoneal dialysis patients.Methods:In this study,602 patients with maintenance hemodialysis and continuous ambulatory peritoneal dialysis were enrolled from December 2020 to December 2022 in our hospital,and their medical records were collected and summarized.The main contents included the patient’s gender,age,primary disease,dialysis duration,dialysis method,the use of erythropoietic stimulating agents(ESA),intravenous iron,and laboratory tests.A Hb index exceeding 110 g/L was set as the standard for the prevalence of anemia.Results:The rate of anemia in patients undergoing blood purification was 83%.The proportion of ESA use was 84.1%,and the proportion of iron use was 76.7%,of which the proportion of intravenous iron used was 17.0%,and the proportion of folic acid used was 28.3%.Conclusion:The incidence of anemia in MHD patients was relatively high,with a low proportion of patients reaching the standard Hb levels.Risk factors include albumin(ALB)levels,iron storage,white blood cells,C-reactive protein,cholesterol,etc.Nutritional support,iron supplementation,and prevention of micro-inflammatory reactions can effectively promote the improvement of Hb indicators in dialysis patients to prevent anemia.
基金supported by National Natural Science Foundation of China(No.U1966211)National Key R&D Program of China(No.2021YFB2401400)。
文摘Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionization collision probability model.The function had three parameters:the first ionization potential energy,A_(α),and B_(α).A_(α)and B_(α)were related to the molecule symmetry and size.The polarization of molecules could characterize the molecule symmetry.The multi-layer molecular cross-section(MMCS)was proposed to describe the contributions of electrons and molecule radius on different molecule surfaces to collisions.A prediction model of the ionization cross-section was also proposed based on Aα.The molecule parameters were calculated by the Becke3–Lee–Yang–Parr(B3LYP)method and the 6–311G**basis set.We used available data of 30 and 23 gases,respectively,to build the prediction models of reduced Townsend ionization coefficients and ionization cross-sections.The relationships between the molecular parameters Aαand Bαand the ionization cross-section were built up via nonlinear fittings.The determination coefficients R^(2)of Aα,Bα,and the ionization cross-section were 0.877,0.887,and 0.838,respectively.The results showed that the accuracy of models was positively correlated with the molecule symmetry and reduced electric field.This was mainly related to the accuracy of the MMCS model in predicting Aα.The MMCS model needed to be improved to describe the collision direction selectivity caused by the molecule asymmetry.Under a high reduced electric field,that error of Aαhad less influence on the prediction results.However,the prediction results for single atoms with high symmetry were poor.This may be due to the absolute error of the model close to single atoms’reduced Townsend ionization coefficients.The models could provide the basis for gas insulation prediction and discharge calculations,especially for symmetric molecules under a high electric field.
基金supported by the National Natural Science Foundation of China (Grant Nos. 2032165 and 62004158)the National Key Scientific Instrument and Equipment Development Project of China (Grant No. 52127817)+1 种基金the State Key Laboratory of Particle Detection and Electronics (Grant Nos. SKLPDE-ZZ-201801 and SKLPDE-ZZ-202008)the Special Funds for Science and Technology Innovation Strategy of Guangdong Province, China (Grant No. 2018A0303130030)。
文摘To predict the soft error rate for applications, it is essential to study the energy dependence of the single-event-upset(SEU) cross-section. In this work, we present a direct measurement of the SEU cross-section with the Back-n white neutron source at the China Spallation Neutron Source. The measured cross section is consistent with the soft error data from the manufacturer and the result suggests that the threshold energy of the SEU is about 0.5 Me V, which confirms the statement in Iwashita’s report that the threshold energy for neutron soft error is much below that of the(n, α) cross-section of silicon.In addition, an index of the effective neutron energy is suggested to characterize the similarity between a spallation neutron beam and the standard atmospheric neutron environment.
基金supported by the National Nature Science Foundation of China(No.81072373)the Health Science and Technology Planning Key Project of Hangzhou City(No.HWS2011Z017)
文摘Objective To assess the test-retest reliability and criterion validity of the Simplified Chinese-character version of the International Physical Activity Questionnaire Long form (IPAC).-L) in urban community-dwelling adults in Hanghzou, China. Methods A total of 158 eligible participants aged 25-59 years from 6 neighbourhoods in two central districts of Hangzhou completed the IPAQ-L questionnaire twice within a 7-day interval. Half of the subjects wore pedometers during the first 7 days. Test-retest reliability was examined by comparing the first (Day 1) and the second (Day 9) survey of IPAQ-L Criterion validity was assessed by comparing IPAO,-L with pedometer data. Results Modest to good test-retest reliability was found with intraclass correlation coefficients of 0.67 for total PA, 0.37 to 0.73 for specific dimensions, and 0.56 to 0.71 for different intensities of PA. Total PA measured by IPAO.-L was moderately correlated with exercise levels (partial r = 0.27, P = 0.020) and walking distance (partial r = 0.31, P = 0.007), which were measured by a pedometer, after adjusting for gender, age, educational attainment and employment status. Conclusion Our results indicate that the IPAO.-L is a reliable and validated measure for assessing physica activity levels in this population and possibly the adult population in other mainland Chinese cities.
基金Supported by National Key Technology R&D Program(No.2011BAG03B03)
文摘The three dimensional variable cross-section roll forming is a kind of new metal forming technology which combines large forming force,multi-axis linkage movement and space synergic movement,and the sequential synergic movement of the ganged roller group is used to complete the metal sheet forming according to the shape of the complicated and variable forming part data.The control system should meet the demands of quick response to the test requirements of the product part.A new kind of real time data driving multi-axis linkage and synergic movement control strategy of 3D roll forming is put forward in the paper.In the new control strategy,the forming data are automatically generated according to the shape of the parts,and the multi-axis linkage movement together with cooperative motion among the six stands of the 3D roll forming machine is driven by the real-time information,and the control nodes are also driven by the forming data.The new control strategy is applied to a 48axis 3D roll forming machine developed by our research center,and the control servo period is less than 10ms.A forming experiment of variable cross section part is carried out,and the forming precision is better than±0.5mm by the control strategy.The result of the experiment proves that the control strategy has significant potentiality for the development of 3D roll forming production line with large scale,multi-axis ganged and synergic movement.
基金the National Natural Science Foundation of China(Grant Nos.92252206,12102471 and 11925207)。
文摘Large Eddy Simulation(LES)has been employed for the investigation of supersonic flow characteristics in five ducts with varying cross-sectional geometries.The numerical results reveal that flow channel configurations exert a considerable influence on the mainstream flow and the near-wall flow behavior.In contrast to straight ducts,square-to-circular and rectangular-to-circular ducts exhibit thicker boundary layers and a greater presence of vortex structures.Given the same inlet area,rectangular-to-circular ducts lead to higher flow drag force and total pressure loss than square-to-circular ducts.Characterized by the substantial flow separation and shock waves,the"S-shaped duct shows significant vertically-asymmetric characteristics.
基金supported by "Eleven Five Years Plan" Basic Research Item of National Defense of China (Grant No. B2220060048)
文摘Cross-section deformation is one of important factors affecting the quality of tube formation, and the tube's capability of transporting liquid and gas will be reduced because of the cross-section ellipse deformation due to the effect of shear load in plastic bending process. When the tube is bent, the extrados-wall bears the tension stress and the intrados-wall bears the compression stress, synchronously the cross-section is affected by the circumferential stress. According to the above, the distribution function and curve of tangential stress can be obtained according to force balance differential equations on circumferential direction and Trasca rule. Subsequently the real state and virtual state moment equations were established, a new method was presented adopting the virtual principle of deformation system to calculate the x-axis and y-axis displacement of arbitrary point on cross-section. So the major and minor axes of deformed cross-section can be calculated according to the displacements of each point, and the variety value of major and minor axes will be obtained further. Finally the theoretical calculating result is compared with NC tube rotary-bending experiment results to verify the rationality of theoretical analysis, and the cross-section deformation rule of thin-walled tube can be received.
基金Supported by Wenzhou Science and Technology Bureau,No.Y20220031.
文摘BACKGROUND Patients with inflammatory bowel diseases(IBDs)generally have poor knowledge,attitude,and practice of their disease,while the data from China are lacking.AIM To address this knowledge disparity among Chinese patients with IBD.METHODS This web-based,cross-sectional study was conducted on a cohort of IBD patients who visited the Second Affiliated Hospital of Wenzhou Medical University between December 2022 and February 2023.Their socio-demographic information and the knowledge,attitude,and practice scores were collected and estimated using a self-designed questionnaire.Pearson’s correlation analysis was used to determine the pairwise correlations among knowledge,attitude,and practice scores.A multivariate logistic regression analysis was further performed to determine the independent factors associated with their knowledge,attitude,and practice scores.RESULTS A total of 353 patients(224 males)with IBD completed the questionnaires.The mean knowledge,attitude,and practice scores were 10.05±3.46(possible range:0-14),41.58±5.23(possible range:0-56),44.20±7.39(possible range:0-56),respectively,indicating good knowledge,positive attitude,and proactive practice toward IBD.Pearson’s correlation analysis showed that the knowledge score had significant positive correlations with the attitude score(r=0.371,P<0.001)and practice score(r=0.100,P<0.001).The attitude score had a significant positive correlation with the practice score(r=0.452,P<0.001).Moreover,multivariate logistic regression analysis showed that aged 30-40 years[odds ratio(OR)=4.06,95%confidence interval(CI):1.04-15.82,P=0.043],middle school education(OR=3.98,95%CI:1.29-12.33,P=0.017),high school/technical secondary school education(OR=14.06,95%CI:3.92-50.38,P<0.001),and junior college/bachelor’s degree and above education(OR=15.20,95%CI:4.15-55.650,P<0.001)were independently associated with good knowledge.The higher knowledge score was independently associated with a positive attitude(OR=1.23,95%CI:1.11-1.36,P<0.001).The higher attitude score was independently associated with proactive practice(OR=1.20,95%CI:1.11-1.30,P<0.001).CONCLUSION Chinese patients with IBD might have good knowledge,a positive attitude,and proactive practice toward their disease.However,a small number of specific items require education.
文摘In modem manufacturing, a new type of sheet metal part with step cross-section in both inner hole and outer edge is proposed. The traditional stamping separating processes can only produce sheet metal part with vertical cross-section. According to the latest developing theory and potential of cold pressure forming: combination of pressure and cold forging, a new flow control forming of sheet metal(FCF) is excogitated based on blanking process of general stamping and combined with cold forging processes such as extrusion and coining, etc, which is aiming at the above-mentioned new type of sheet metal part. With utilization of this new process, the new type of sheet metal parts can be manufactured. In order to shorten the testing period, the numerical simulation was carried out by using DEFORM-3D software, and both deformation and mechanics rules were analyzed. Based on the simulation, both punching part and blanked parts of this new type were successfully developed. Then a new conception of optimal distance between the step walls of inner hole and outside edge was proposed and the design principle for its numerical value was inferred. Furthermore, a mold set for combination of stamping & cold forging was designed and manufactured, by which the technologic experiments were taken for validation with Aluminum plate of thickness 2.35 mm for power battery cover board, which verified the principle of the distance between the step walls. The research of cold pressure forming of thin sheet metal with step cross-section is significant, not only to the development of modem mechanical manufacture, but also to metal plastic forming science.
文摘Background:Depression and anxiety are highly prevalent among adolescents and have multiple negative effects on their physical and mental health.While exercise can reduce the symptoms of depression and anxiety,the rela-tionship between mental disorders among American university students has been rarely reported.Accordingly,this study aimed to explore the association between exercise,depression and anxiety among American university students in the 2018–2019 academic year.Methods:In this cross-sectional study,the association between exercise,depression and anxiety was investigated in a large representative sample of American university students.In the 2018–2019 academic year,university students aged 18+years old from 79 institutions participated in this school-based study.The questionnaire included measurements of demographic characteristics,exercise,and validated screen instructions for depression(PHQ-9)and anxiety(GAD-7).The multivariable logistic regression model was applied to explore the association between exercise,depression and anxiety.Results:A total of 62026 indivi-duals(31.9%males)participated in this survey,and the prevalence of exercising at least 5 h each day was 24.6%.The prevalence of depression and anxiety was 25.7%and 22.3%,respectively.In the multivariable logistic regres-sion model,compared to exercise at least 5 h daily,participants whose exercise less than 1 h daily(OR=1.31[1.29,1.33],p<0.05),2 to 3 h daily(OR=1.13[1.11,1.15],p<0.05),3 to 4 h daily(OR=1.04[1.02,1.06],p<0.05),were correlated with greater odds of depression,while exercise less than 1 h daily(OR=1.23[1.21,1.25],p<0.05),2 to 3 h daily(OR=1.10[1.08,1.12],p<0.05)were significantly correlated with great-er odds of anxiety.Conclusion:Higher levels of exercise are associated with lower risk of depression and anxiety among American university students.Community and school interventions should focus on increasing exercise participation in university populations to promote both physical and mental health.
基金supported by the Key Research and Development Project of Shandong Province[2019GSF109084]the National Natural Science Foundation of China[51776111]Young Scholars Program of Shandong University[2018WLJH73].
文摘Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode shapes,and structure-borne noise in such systems are investigated in this study.The results demonstrate that the maximum displacement and equivalent stress are located in the part with variable cross-sectional area.The aver-age excitation force on theflow channel wall increases with theflow velocity.The maximum excitation force occurs in the range of 0–20 Hz,and then it decreases gradually in the range of 20–1000 Hz.Additionally,as theflow velocity rises from 1 to 3 m/s,the overall sound pressure level associated with theflow-induced noise grows from 49.37 to 66.37 dB.Similarly,the overall sound pressure level associated with the structure-borne noise rises from 40.27 to 72.20 dB.When theflow velocity is increased,the increment of the structure-borne noise is higher than that of theflow-induced noise.