Particle Velocity Sensor and Its Application in Near-Field Noise Scanning Measurement

The Particle Velocity Sensor (PVS) is a kind of acoustic transducer which measures the particle velocity directly with figure-of-eight directivity. This paper proposes a near-field noise scanning technology based on the research of PVS, pressure-particle velocity (P-U) probe, and its application in noise source identification. Firstly, the principle and characteristics of PVS are presented. Secondly, a P-U probe is designed on the basis of PVS development. Finally, the noise measurement experiment for a single source is arranged and conducted. The result shows that the proposed P-U probe performs well in near-field noise source identification and localization.

Possible Nodeless Superconducting Gaps in Bi_2Sr_2CaCu_2O_(8+δ) and YBa_2Cu_3O_(7-x) Revealed by Cross-Sectional Scanning Tunneling Spectroscopy

Pairing in the cuprate high-temperature superconductors and its origin remain among the most enduring mysteries in condensed matter physics. With cross-sectional scanning tunneling microscopy/spectroscopy, we clearly reveal the spatial-dependence or inhomogeneity of the superconducting gap structure of Bi2Sr2CaCu2O8＋δ （Bi2212） and YBa2Cu3O7-x （YBCO） along their c-axes on a scale shorter than the interlayer spacing. By tunneling into the （100） plane of a Bi2212 single crystal and a YBCO film, we observe both U-shaped tunneling spectra with extended fiat zero-conductance bottoms, and V-shaped gap structures, in different regions of each sample. On the YBCO film, tunneling into a （110） surface only reveals a U-shaped gap without any zero-bias peak. Our analysis suggests that the U-shaped gap is likely a nodeless superconducting gap. The V-shaped gap has a very small amplitude, and is likely proximity-induced by regions having the larger U-shaped gap.

A Study of Precision Factors of Large-scale Object Surface Profile Laser Scanning Measurement

In this paper, we presented a method of using the l as er scanning triangulation for the non-contact 3D surface profile measurement of large-scale object. The characteristic of large-scale object non-contact mea surement is analyzed and the measuring method is proposed. Main factors influenc ing measurement precision such as image distortion and accurate designation of s peckle center are analyzed and methods of solving these problems are proposed. W e designed a combined filter by which the pulse noise and the Gaussian noise of speckle image can be eliminated efficiently. Using the characteristic of intensi ty distribution of laser speckle image we proposed a new approximating method th at could locate the center of laser speckle image at sub-pixel. The auxiliary v ariables are set to linearize the relationship between the image displacement an d the distance, the accurate values of laser triangulation system parameters cou ld be calibrated accurately and the measuring precision is increased remarkabl y. Using the above techniques we designed a measuring system based on laser sc anning triangulation. The results of the experiment show that these methods can raise the measuring precision of large-scale 3D surface profile effectively.

Development of laser and microwave scanning technologies in the blast furnace burden profile and lining condition measurement at CSC

In order to stabilise the operation of the blast furnace and to raise its operation efficiency,research works for the application of microwave and laser scanning technologies to the measurement have been intensively carried out at China Steel Corporation(CSC).To monitor the burden profile during the operation,a microwave burden profile measuring system was developed.The system consists of a radar unit,a signal processing system, and a driving device which is capable of rotating the radar to scan the burden surface in a specified direction.A nitrogen cooling system was designed to protect the measurement system.A prototype burden profile meter was successfully tested in No.1 blast furnace in 2008,and a permanent one was installed at No.3 blast furnace.The system has provided useful information for adjusting the charging sequence in No.3 blast furnace.For another application,3 - D laser scanning technology is employed to monitor the blast furnace lining condition.To this end,a data registration method has been developed,through which two measured range images sensed at different period and locations can be fitted into the same coordinate system.In practice,the erosion of the blast furnace lining can be estimated when the current inner profile is compared with that taken before the blow-in operation. This technology is also adopted to evaluate the performance of gunning operation in the blast furnaces at CSC.

Fault Diagnosis and Separation for a Distributed Rotary-laser Scanning System

The wMPS is a laser-based measurement system used for large scale metrology.However,it is susceptible to external factors such as vibrations,which can lead to unreliable measurements.This paper presents a fault diagnosis and separation method which can counter this problem.To begin with,the paper uses simple models to explain the fault diagnosis and separation methods.These methods are then mathematically derived using statistical analysis and the principles of the wMPS.A comprehensive solution for fault diagnosis and separation is proposed,considering the characteristics of the wMPS.The effectiveness of this solution is verified through experimental observations.It can be concluded that this approach can detect and separate false observations,thereby enhancing the reliability of the wMPS.

Detecting Impact Damage in Carbon Fabric/epoxy-matrix Composites by Ultrasonic F-scan and Electrical Resistance Measurement

The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact damage energy threshold value of carbon fabric/epoxy-matrix composites can determine by using ultrasonic F-scan. When the impact energy exceeds the threshold value, damage is generated in composites. Electrical resistance of impacted composites is changed owing to the contact of each carbon fiber unit in composites, which cause a change of the series-parallel in conductors. The veracity of detecting impact damage in composites can be improved in this case.

STUDY ON THE SCANNING PROBE MICROSCOPE WITH WIDE MEASURING RANGE

ＳＴＵＤＹＯＮＴＨＥＳＣＡＮＮＩＮＧＰＲＯＢＥＭＩＣＲＯＳＣＯＰＥＷＩＴＨＷＩＤＥＭＥＡＳＵＲＩＮＧＲＡＮＧＥＺｈａｎｇＨｏｎｇｈａｉ，ＣａｏＷｅｉ，ＬｉＷｅｎｊｕ，ＳｈｉＨａｎｍｉｎ，ＣｈｅｎＲｉｙａｏＨｕａｚｈｎｇＵｎｉｖｅｒｓｉｔｙｏｆＳｃｉｅ...

A Portable Noncontact Profile Scanning System for Aircraft Assembly

Three-dimensional(3D)profile scanning plays a crucial role in the inspection of assembled large aircraft.In this paper,to achieve noncontact automatic measurements of the high-reflective profiles of large-scale curved parts and components,an automated noncontact system and method with high accuracy and high efficiency are presented.First,a hybrid 3D coordinate measurement system based on proximity sensors and cameras is proposed to obtain noncontact measurements while avoiding the influence of high reflection on the measurement accuracy.A hybrid measurement model that combines the one-dimensional distances measured by the proximity sensors and the 3D information obtained by cameras is proposed to determine high-accuracy 3D coordinates of the measured points.Then,a profile-driven 3D automated scanning method and strategy are designed to rapidly scan and reconstruct the profile within the effective range without scratching the profile or exceeding the measurement range of the proposed system.Finally,experiments and accuracy analyses are performed in situ on an assembled tailplane panel(approximately 1760 mm×460 mm).The automated scanning process is completed in a timeframe of 208s with an average error of less than 0.121 mm for profile reconstruction.Therefore,the proposed method is promising considering both the high accuracy and high efficiency requirements of profile inspections for large aircraft.

Nucleation and Growth of Thallium on Thin Film Mercury Electrode: Voltammetric, Scanning Electron Microscopy, Chronoamperometric and Electrochemical Impedance Studies

Thallium is a heavy metal highly toxic to the biosphere. It can be determined by anodic stripping voltammetry after deposition on mercury film. The aim of this work is to study the conditions and mechanisms of deposition of Hg on glassy carbon electrode and Tl on Hg film by cyclic voltammetry, scanning electron microscopy, chronoamperometry and impedance techniques. The results showed a germination and growth of a 3D Hg phase on glassy carbon electrode. Similarly, the electrodeposition of Tl on Hg follows a 3D three-dimensional nucleation with diffusion controlled growth. The impedance measurements reveal an easier charge transfer on the Tl film.

Far-Field Pattern Reconstruction from Positioning Errors Affected Near-Field Data Acquired via Helicoidal Scanning

In this paper, an effective technique to compensate the positioning errors in a near-field—far-field (NF-FF) transformation with helicoidal scanning for elongated antennas is presented and validated both numerically and experimentally. It relies on a nonredundant sampling representation of the voltage measured by the probe, obtained by considering the antenna as enclosed in a cylinder ended in two half-spheres. An iterative scheme is used to reconstruct the helicoidal NF data at the points fixed by the representation from the acquired irregularly spaced ones. Once the helicoidal data have been retrieved, those needed by a classical NF-FF transformation with cylindrical scanning are efficiently evaluated by using an optimal sampling interpolation algorithm. Some numerical tests, assessing the accuracy of the approach and its stability with respect to random errors affecting the data, are reported. Experimental tests performed at the Antenna Characterization Lab of the University of Salerno further confirm the validity of the proposed technique.

Identification of Internal Damage in Circular Cylinders through Laser Scanning of Vibrating Surfaces

With the aid of non-contact measurements of vibrating surfaces through laser scanning,operating deflection shapes(ODSs)with high spatial resolutions can be used to graphically characterize damage in plane structures.Although numerous damage identification approaches relying on laser-measured ODSs have been developed for plate-type structures,they cannot be directly applied to circular cylinders due to the gap between equations of motions of plates and circular cylinders.To fill this gap,a novel approach is proposed in this study for damage identification of circular cylinders.Damage-induced discontinuities of the derivatives of ODSs can be used to gra-phically manifest the occurrence of the damage,and characterize the location and size of the damage.The approach is experimentally validated on a specimen of the circular cylinder component,whose out-of-plane ODSs in an inspection region are acquired through laser scanning using a scanning laser vibrometer.The results suggest that the occurrence,location,and size of the internal damage of the circular cylinder can be identified.

Diameters and form of skull base foramen ovale measured by three-dimensional spiral CT thin-slice scan in healthy adults

BACKGROUND： The accurate measurements of various data of the bone diameters of foramen ovale of living person can change the methods of puncturing trigeminal gasserian ganglion via foramen ovale for treating trifacial neuralgia from the experience of puncture operator only to puncture by taking the objective data of measurement as the evidence, which is good for improving the accuracy of puncturing trigeminal ganglion and reducing side effects. OBJECTIVE ： To observe the forms of foramen ovales in healthy adults displayed by volume rendering and multi-planar reconstruction after three-dimensional spiral CT thin-slice scan of skull base, and measure the longitudinal diameter and transverse diameter. DESIGN ： A repetitive observation and measurement SETTINGS ： Department of Neurosurgery and Department of Medical Imaging, Foshan Hospital of Traditional Chinese Medicine. PARTICIPANTS： Fifty healthy adults （100 sides）, who were examined with three-dimensional spiral CT scan, were randomly selected from the Department of Medical Imaging, Foshan Hospital of Traditional Chinese Medicine from January 2005 to January 2006, including 26 males and 24 females, aged 25-68 years with an average of 48 years old. They were all informed and agreed with the examination. METHODS ： The subjects were examined with the Philips 16-slice spiral CT-Mx 8000 IDT CT apparatus （Philips Company, Holland）, the scanning ranged from 2 cm below the canthomeatal line to the level of suprasellar cistem. The width of collimator was 0.75 mm, pitch was 0.663; tube current was 350 mA, voltage was 120 kV, resolution was 512×512 matrix; slice thickness of reconstruction was 1 mm, and interval was 0.5 mm. After the three-dimensional spiral CT thin-slice scan of skull base, the image post-processing techniques including volume rendering and multi-planar reconstruction were applied to observe the forms of foramen ovales, and measure the size, longitudinal diameter and transverse diameter of the foramen ovales. The figures of the foramen ovales were drawn with mouse along the boundary of bone porous margin and soft tissue. According to the indications, the diameters were measured with computer to observe the forms of foramen ovales. MAIN OUTCOME MEASURES ： The longitudinal diameter, transverse diameter and form of foramen ovales were observed. RESULTS： All the 50 healthy adults （100 sides） were involved in the analysis of results. （1） It was observed in the volume rendering images that foramen ovales had four forms of oval shape （77 sides）, kidney shape （12 sides）, round shape （7 sides）, ribbon shape （4 sides）. （2） The longitudinal diameters of left and right foramen ovales were （7.67±1.32） and （7.98±1.45） mm, and the transverse diameters were （4.04±0.83）, （4.09±1.07） mm; There was no obvious difference between left and right longitudinal diameters （t = 1.63, P = 0.11 ）, and left and right transverse diameters were close （t = 0.45, P= 0.65）. CONCLUSION ： The non-invasive techniques of volume rendering and multi-planar reconstruction after three-dimensional spiral CT thin-slice scan can clearly display the formand size of foramen ovale in healthy adults.

Fringe Projection Measurement System in Reverse Engineering

Acquisition of physical data with high precision is a key step in reverse engineering (RE). It is an important stimulative for the progress of reverse engineering with which various digitizing devices are invent ed, developed and made applicable. This paper introduces a three dimensional opt ical measurement method based on digital fringe projection technique in RE to im prove the technique through its application. A practical example is presented an d the result demonstrates the applicability and feasibility of the measurement s ystem as well as the reliability and validity of relevant methods and algorithms .

2-D localization system utilizing M-sequence encoded laser beam scanning

In this paper, as the active position measurement system, a novel method for a two-dimensional localization system using M-sequence signal is proposed. The feature of this system is to realize a position measurement only by scanning the encoded laser beams from fixing points to a measurement field, and by observing it. First, both the system configuration and encoding method were practically considered, and an order and an initial value of M-sequence signal were selected for encoding. This method is based on discrete angle measurement therefore the resolution has its own limitation. To overcome this limitation, analogue phase shift detecting method was introduced. System design was performed and applied to position measurement experiments. The experimental results show that the measurement error of the analogue method is 1/3 of that of the discrete method.

High Speed Laser 3D Measurement System

Using the method of line structure light produced by a laser diode,three dimensional profile measurement is deeply researched.A hardware circuit developed is used to get the center position of light section for the improvement of the measurement speed.A double CCD compensation technology is used to improve the measurement precision. An easy and effective calibration method of the least squares to fit the parameter of system structure is used to get the relative coordinate relationship of objects and images of light section in the directions of height and axis. Sensor scanning segment by segment and layer by layer makes the measurement range expand greatly.

Methodology for Extraction of Tunnel Cross-Sections Using Dense Point Cloud Data

Tunnel deformation monitoring is a crucial task to evaluate tunnel stability during the metro operation period.Terrestrial Laser Scanning(TLS)can collect high density and high accuracy point cloud data in a few minutes as an innovation technique,which provides promising applications in tunnel deformation monitoring.Here,an efficient method for extracting tunnel cross-sections and convergence analysis using dense TLS point cloud data is proposed.First,the tunnel orientation is determined using principal component analysis(PCA)in the Euclidean plane.Two control points are introduced to detect and remove the unsuitable points by using point cloud division and then the ground points are removed by defining an elevation value width of 0.5 m.Next,a z-score method is introduced to detect and remove the outlies.Because the tunnel cross-section’s standard shape is round,the circle fitting is implemented using the least-squares method.Afterward,the convergence analysis is made at the angles of 0°,30°and 150°.The proposed approach’s feasibility is tested on a TLS point cloud of a Nanjing subway tunnel acquired using a FARO X330 laser scanner.The results indicate that the proposed methodology achieves an overall accuracy of 1.34 mm,which is also in agreement with the measurements acquired by a total station instrument.The proposed methodology provides new insights and references for the applications of TLS in tunnel deformation monitoring,which can also be extended to other engineering applications.

The Measurement and Control of Diameter in Large-Scale Part Processing

Based on laser-scanned measuring technology, a met ho d of on-line dynamic non-contact measurement and feedback control of processin g dimension, i.e. the double edges laser-scanned large diameter on-line dynami c measurement and control system is presented, which can be used to measure diam eter in large-scale machine part processing. In this paper, the working princip le, overall structure and microcomputer real-time control and data processing s ystem of the system are discussed in detail, the method of double edges scanned large diameter dimension measurement and control is theoretically analyzed, its possibility has been verified by experiments of lathing large diameters machine parts by a vertical lathe. The system adopts the measuring scheme of double edge s laser-scanned combined with grating displacement measurement. The two edges c haracteristic information of the measured diameter is given by the double edges laser-scanned measuring system, the non-contact measurement of large diameter dimension is realized to combine with the grating displacement measuring systems . The main controller gives out feedback control signal by means of measured res ults, and controls advance and retreat of lathe tool by the servo-control syste m of a vertical lathe to realize on-line dynamic non-contact measurement and c ontrol in processing.

高能激光光束质量β因子测量方法

高能激光光束质量β因子测量装置主要用于强激光系统状态调试和综合性能参数诊断,用于评价激光系统出光性能以及远场光斑可聚焦的能力。针对接近衍射极限光束质量β因子测量过程中被测光斑在面阵相机上所占的像素点太少等缺陷,研究了采用聚焦显微放大与高精度扫描狭缝相结合的光束质量β因子测量方法,并对相关方案进行了分析计算。此外还设计了采用固定像差元件及平行光管光源组合的激光光束质量β因子测量结果验证方案,对研制的高能激光光束质量β因子测量装置进行了不确定度分析,测量不确定度优于10%。

新型旋转激光扫描系统轴系调整与误差标定

旋转激光扫描系统是一种基于精密转台结合多路激光的空间多目标并行角度传感系统。为改善系统光源性能,设计了一种采用光纤从外部导入光源的新型轴系结构。但是当激光以一定角度穿过中空的转轴进入镜组后,若倾斜入射柱镜,将导致出射的扫描光面型发生变化。针对此问题,研究了一种基于平行线的传递性的激光光轴姿态的调整方法,并借助激光跟踪仪测量平台,分别对光轴与转轴轴系进行拟合,建立了对光轴倾斜误差的标定方法。实验结果表明,调整后光轴与转轴轴线的空间夹角优于0.15°,完全满足扫描光截面中心直线度对激光入射柱镜的角度要求。该调整方案可用于系统的装配环节,使扫描光更加接近理想平面,有助于系统测量精度的提升。