Influences of the Helical Strake Cross-Section Shape on Vortex-Induced Vibrations Suppression for A Long Flexible Cylinder

An experimental study on a bare flexible cylinder as well as cylinders fitted with two types of cross-sectioned helical strakes was carried out in a towing tank. The main purpose of this paper is to investigate the effects of strakes’ cross-section on the vortex-induced vibrations （VIV） suppression of a flexible cylinder. The square-sectioned and round-sectioned helical strakes were selected in the experimental tests. The uniform current was generated by towing the cylinder models along the tank using a towing carriage. The Reynolds number was in the range of 800–16000. The strain responses were measured by the strain gages in cross-flow （CF） and in-line （IL） directions. A modal analysis method was adopted to obtain the displacement responses using the strain signals in different measurement positions. The comparison of the experimental results among the bare cylinder, square-sectioned straked cylinder and round-sectioned straked cylinder was performed. The helical strakes can effectively reduce the strain amplitude, displacement amplitude, response frequencies and dominant modes of a flexible cylinder excited by VIV. And the mean drag coefficients of straked cylinders were approximately consistent with each other. In addition, the square-sectioned and round-sectioned strakes nearly share the similar VIV reduction behaviors. Sometimes, the strakes with round-section represent more excellent effects on the VIV suppression of response frequency than those with square-section.

The recirculation flow after different cross-section shaped high-rise buildings with applications to ventilation assessment and drag parameterization

The building cross-section shape significantly affects the flow characteristics around buildings,especially the recirculation region behind the high-rise building.Eight generic building shapes including square,triangle,octagon,T-shaped,cross-shaped,#-shaped,H-shaped and L-shaped are examined to elucidate their effects on the flow patterns,recirculation length L and areas A using computational fluid dynamics(CFD)simulations with Reynolds-averaged Navier-Stokes(RANS)approach.The sizes and positions of the vortexes behind the buildings are found to be substantially affected by the building shapes and subsequently changing the recirculation flows.The recirculation length L is in the range of 1.6b-2.6b with an average of 2b.The maximum L is found for L-shaped building(2.6b)while the shortest behind octagon building(1.6b).The vertical recirculation area Av is in the range of 1.5b^(2)-3.2b^(2)and horizontal area Ah in 0.9b^(2)-2.2b^(2).The L,Av and Ah generally increase with increasing approaching frontal area when the wind direction changes but subject to the dent structures of the#-shaped and cross-shaped buildings.The area-averaged wind velocity ratio(AVR),which is proposed to assess the ventilation performance,is in the range of 0.05 and 0.14,which is around a three-fold difference among the different building shapes.The drag coefficient parameterized by Ah varies significantly,suggesting that previous models without accounting for building shape effect could result in large uncertainty in the drag predictions.These findings provide important reference for improving pedestrian wind environment and shed some light on refining the urban canopy parameterization by considering the building shape effect.

Optimization Design of the Multi-Layer Cross-Sectional Layout of An Umbilical Based on the GA-GLM

Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components directly affects manufacturing,operation and storage performances of the umbilical.For the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage requirements.Considering the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional components.Then,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent method.Genetic algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout solution.The feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate solution.Finally,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is higher.Meanwhile,the multi-layering strategy is effective and feasible.The design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.

Dyslipidemia in Adults with Type 2 Diabetes in a Rural Community in Ganadougou, Mali: A Cross-Sectional Study

Dyslipidemia is a disorder where abnormally lipid concentrations circulate in the bloodstream. The disorder is common in type 2 diabetics (T2D) and is linked with T2D comorbidities, particularly cardiovascular disease. Dyslipidemia in T2D is typically characterized by elevated plasma triglyceride and low high-density lipoprotein cholesterol (HDL-C) levels. There is a significant gap in the literature regarding dyslipidemia in rural parts of Africa, where lipid profiles may not be captured through routine surveillance. This study aimed to characterize the prevalence and demo-graphic profile of dyslipidemia in T2D in the rural community of Ganadougou, Mali. We performed a cross-sectional study of 104 subjects with T2D in Ganadougou between November 2021 and March 2022. Demographic and lipid profiles were collected through cross-sectional surveys and serological analyses. The overall prevalence of dyslipidemia in T2D patients was 87.5% (91/104), which did not differ by sex (P = .368). High low-density lipoprotein cholesterol (LDL-C) was the most common lipid abnormality (78.9%, [82/104]). Dyslipidemia was associated with age and hypertension status (P = .013 and.036, respectively). High total and high LDL-C parameters were significantly associated with hypertension (P = .029 and .006, respectively). In low-resource settings such as rural Mali, there is a critical need to improve infrastructure for routine dyslipidemia screening to guide its prevention and intervention approaches. The high rates of dyslipidemia observed in Gandadougou, consistent with concomitant increases in cardiovascular diseases in Africa suggest that lipid profile assessments should be incorporated into routine medical care for T2D patients in African rural settings.

Association between triglyceride-glucose index and colorectal polyps:A retrospective cross-sectional study

BACKGROUND Colorectal polyps(CPs)are frequently occurring abnormal growths in the colorectum,and are a primary precursor of colorectal cancer(CRC).The triglyceride-glucose(TyG)index is a novel marker that assesses metabolic health and insulin resistance,and has been linked to gastrointestinal cancers.AIM To investigate the potential association between the TyG index and CPs,as the relation between them has not been documented.METHODS A total of 2537 persons undergoing a routine health physical examination and colonoscopy at The First People's Hospital of Kunshan,Jiangsu Province,China,between January 2020 and December 2022 were included in this retrospective cross-sectional study.After excluding individuals who did not meet the eligibility criteria,descriptive statistics were used to compare characteristics between patients with and without CPs.Logistic regression analyses were conducted to determine the associations between the TyG index and the prevalence of CPs.The TyG index was calculated using the following formula:Ln[triglyceride(mg/dL)×glucose(mg/dL)/2].The presence and types of CPs was determined based on data from colonoscopy reports and pathology reports.RESULTS A nonlinear relation between the TyG index and the prevalence of CPs was identified,and exhibited a curvilinear pattern with a cut-off point of 2.31.A significant association was observed before the turning point,with an odds ratio(95% confidence interval)of 1.70(1.40,2.06),P<0.0001.However,the association between the TyG index and CPs was not significant after the cut-off point,with an odds ratio(95% confidence interval)of 0.57(0.27,1.23),P=0.1521.CONCLUSION Our study revealed a curvilinear association between the TyG index and CPs in Chinese individuals,suggesting its potential utility in developing colonoscopy screening strategies for preventing CRC.

Mental health and insomnia problems in healthcare workers after the COVID-19 pandemic:A multicenter cross-sectional study

BACKGROUND Healthcare workers(HCWs)are at increased risk of contracting coronavirus disease 2019(COVID-19)as well as worsening mental health problems and insomnia.These problems can persist for a long period,even after the pandemic.However,less is known about this topic.AIM To analyze mental health,insomnia problems,and their influencing factors in HCWs after the COVID-19 pandemic.METHODS This multicenter cross-sectional,hospital-based study was conducted from June 1,2023 to June 30,2023,which was a half-year after the end of the COVID-19 emergency.Region-stratified population-based cluster sampling was applied at the provincial level for Chinese HCWs.Symptoms such as anxiety,depression,and insomnia were evaluated by the Generalized Anxiety Disorder-7,Patient Health Questionnaire-9,and Insomnia Severity Index.Factors influencing the symptoms were identified by multivariable logistic regression.RESULTS A total of 2000 participants were invited,for a response rate of 70.6%.A total of 1412 HCWs[618(43.8%)doctors,583(41.3%)nurses and 211(14.9%)nonfrontline],254(18.0%),231(16.4%),and 289(20.5%)had symptoms of anxiety,depression,and insomnia,respectively;severe symptoms were found in 58(4.1%),49(3.5%),and 111(7.9%)of the participants.Nurses,female sex,and hospitalization for COVID-19 were risk factors for anxiety,depression,and insomnia symptoms;moreover,death from family or friends was a risk factor for insomnia symptoms.During the COVID-19 outbreak,most[1086(76.9%)]of the participating HCWs received psychological interventions,while nearly all[994(70.4%)]of them had received public psychological education.Only 102(7.2%)of the HCWs received individual counseling from COVID-19.CONCLUSION Although the mental health and sleep problems of HCWs were relieved after the COVID-19 pandemic,they still faced challenges and greater risks than did the general population.Identifying risk factors would help in providing targeted interventions.In addition,although a major proportion of HCWs have received public psychological education,individual interventions are still insufficient.

Theoretical analysis of the double-differential cross-sections of neutron,proton,deuteron,^(3)He,andαfor the p+^(6) Li reaction

Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.

First Born Double Differential Cross-Section for Ionization of H (3d) by Incident Electron Impact

Double differential cross section (DDCS) of First-Born approximation is calcu-lated for the ionization of metastable 3d-state hydrogen atoms by electron impact energy at 150 eV and 250 eV. A multiple scattering theory is applied in the present study. The present results are compared with the other related the-oretical results for the ionization of hydrogen atoms from different metastable states and ground-state experimental results. The findings demonstrate a strong qualitative agreement with the existing results. The obtained results have an extensive scope for further study of such an ionization process.

A Cross-Sectional Study on The Prevalence of Anemia in Maintenance Hemodialysis and Peritoneal Dialysis Patients and Its Related Factors

Objective:To study the prevalence of anemia,the proportion of hemoglobin(Hb)levels,the treatment methods,and the influencing factors of Hb levels in maintenance hemodialysis(MHD)and peritoneal dialysis patients.Methods:In this study,602 patients with maintenance hemodialysis and continuous ambulatory peritoneal dialysis were enrolled from December 2020 to December 2022 in our hospital,and their medical records were collected and summarized.The main contents included the patient’s gender,age,primary disease,dialysis duration,dialysis method,the use of erythropoietic stimulating agents(ESA),intravenous iron,and laboratory tests.A Hb index exceeding 110 g/L was set as the standard for the prevalence of anemia.Results:The rate of anemia in patients undergoing blood purification was 83%.The proportion of ESA use was 84.1%,and the proportion of iron use was 76.7%,of which the proportion of intravenous iron used was 17.0%,and the proportion of folic acid used was 28.3%.Conclusion:The incidence of anemia in MHD patients was relatively high,with a low proportion of patients reaching the standard Hb levels.Risk factors include albumin(ALB)levels,iron storage,white blood cells,C-reactive protein,cholesterol,etc.Nutritional support,iron supplementation,and prevention of micro-inflammatory reactions can effectively promote the improvement of Hb indicators in dialysis patients to prevent anemia.

Effects of tube cross-sectional shapes on flow pattern, liquid film and heat transfer of n-pentane across tube bundles

The heat transfer of hydrocarbon refrigerant across tube bundles have been widely used in refrigeration.Three-dimensional simulation model using volume of fluid(VOF) was presented to study the effects of tube shapes on flow pattern, film thickness and heat transfer of n-pentane across tube bundles, including circle, ellipse-shaped, egg-shaped and cam-shaped tube bundles. Simulation results agree well with experimental data in the literature. The liquid film thickness of sheet flow and heat transfer for different tube shapes were obtained numerically. The flow pattern transition occurs lower vapor quality for ellipse-shaped tube than other tube shapes. For sheet flow, the liquid film on circle tube and ellipseshaped tube is symmetrically distributed along the circumferential direction. However, the liquid film on egg-shaped tube at circumferential angles(θ) = 15°–60° is thicker than θ = 135°–165°. The liquid film on cam tube at θ = 15°–60° is slightly thinner than θ = 135°–165°. The liquid film thickness varies from thinner to thicker for ellipse-shaped, cam-shaped, egg-shape and circle within θ = 15°–60°. The effect of tube shape is insignificant on thin liquid film thickness. Ellipse-shaped tube has largest heat transfer coefficient for sheet flow. In practical engineering, the tube shape could be designed as ellipse to promote heat transfer.

3shape Trios 3口内扫描和传统硅橡胶在牙体缺损修复中的失败原因分析

目的分析并比较3shape Trios 3口内扫描和传统硅橡胶在牙体缺损修复中的失败原因,为临床取模以及口内扫描仪性能改善提供参考依据。方法回顾性分析2021年1月至2023年10月实施口腔固定修复治疗并返工的200例患者为研究对象,以取模方式将其分为口扫组(n=97)和硅橡胶组(n=103)。口扫组给予3shape Trios 3口内扫描,硅橡胶组给予传统硅橡胶。比较两组在牙体缺损修复中的失败原因。结果两组的牙体缺损修复失败分布情况比较,差异具有统计学意义(P<0.05);口扫组中,龈下缺损修复失败占比高于龈上(P<0.05)。两组的龈下缺损修复失败原因比较,差异具有统计学意义(P<0.05)。结论相较于传统硅橡胶,3shape Trios 3口内扫描在龈上缺损修复中更有优势,但在龈下缺损修复中,硅橡胶应用效果更佳。

Prediction models of the ionization coefficient and ionization cross-section based on multi-layer molecular parameters

Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionization collision probability model.The function had three parameters:the first ionization potential energy,A_(α),and B_(α).A_(α)and B_(α)were related to the molecule symmetry and size.The polarization of molecules could characterize the molecule symmetry.The multi-layer molecular cross-section(MMCS)was proposed to describe the contributions of electrons and molecule radius on different molecule surfaces to collisions.A prediction model of the ionization cross-section was also proposed based on Aα.The molecule parameters were calculated by the Becke3–Lee–Yang–Parr(B3LYP)method and the 6–311G**basis set.We used available data of 30 and 23 gases,respectively,to build the prediction models of reduced Townsend ionization coefficients and ionization cross-sections.The relationships between the molecular parameters Aαand Bαand the ionization cross-section were built up via nonlinear fittings.The determination coefficients R^(2)of Aα,Bα,and the ionization cross-section were 0.877,0.887,and 0.838,respectively.The results showed that the accuracy of models was positively correlated with the molecule symmetry and reduced electric field.This was mainly related to the accuracy of the MMCS model in predicting Aα.The MMCS model needed to be improved to describe the collision direction selectivity caused by the molecule asymmetry.Under a high reduced electric field,that error of Aαhad less influence on the prediction results.However,the prediction results for single atoms with high symmetry were poor.This may be due to the absolute error of the model close to single atoms’reduced Townsend ionization coefficients.The models could provide the basis for gas insulation prediction and discharge calculations,especially for symmetric molecules under a high electric field.

Direct measurement of an energy-dependent single-event-upset cross-section with time-of-flight method at CSNS

To predict the soft error rate for applications, it is essential to study the energy dependence of the single-event-upset(SEU) cross-section. In this work, we present a direct measurement of the SEU cross-section with the Back-n white neutron source at the China Spallation Neutron Source. The measured cross section is consistent with the soft error data from the manufacturer and the result suggests that the threshold energy of the SEU is about 0.5 Me V, which confirms the statement in Iwashita’s report that the threshold energy for neutron soft error is much below that of the(n, α) cross-section of silicon.In addition, an index of the effective neutron energy is suggested to characterize the similarity between a spallation neutron beam and the standard atmospheric neutron environment.

Fabrication of High-Density Out-of-Plane Microneedle Arrays with Various Heights and Diverse Cross-Sectional Shapes

Out-of-plane microneedle structures are widely used in various applications such as transcutaneous drug delivery and neural signal recording for brain machine interface.This work presents a novel but simple method to fabricate high-density silicon(Si)microneedle arrays with various heights and diverse cross-sectional shapes depending on photomask pattern designs.The proposed fabrication method is composed of a single photolithography and two subsequent deep reactive ion etching(DRIE)steps.First,a photoresist layer was patterned on a Si substrate to define areas to be etched,which will eventually determine the final location and shape of each individual microneedle.Then,the 1st DRIE step created deep trenches with a highly anisotropic etching of the Si substrate.Subsequently,the photoresist was removed for more isotropic etching;the 2nd DRIE isolated and sharpened microneedles from the predefined trench structures.Depending on diverse photomask designs,the 2nd DRIE formed arrays of microneedles that have various height distributions,as well as diverse cross-sectional shapes across the substrate.With these simple steps,high-aspect ratio microneedles were created in the high density of up to 625 microneedles mm^(-2)on a Si wafer.Insertion tests showed a small force as low as~172μN/microneedle is required for microneedle arrays to penetrate the dura mater of a mouse brain.To demonstrate a feasibility of drug delivery application,we also implemented silk microneedle arrays using molding processes.The fabrication method of the present study is expected to be broadly applicable to create microneedle structures for drug delivery,neuroprosthetic devices,and so on.

The Optimal Cross-section Design of the “Trapezoid-V” Shaped Drainage Canal of Viscous Debris Flow

Debris flow drainage canal is one of the most widely used engineering measures to prevent and manage debris flow hazards.The shape and the sizes of the cross-section are important parameters when design debris flow drainage canal.Therefore,how to design the appropriate shape and sizes of the cross-section so that the drainage canal can have the optimal drainage capacity is very important and few researched at home and abroad.This study was conducted to analyze the hydraulic condition of a Trapezoid-V shaped drainage canal and optimize its cross-section.By assuming characteristic sizes of the cross-section,the paper deduced the configuration parameter of the cross-section of a Trapezoid-V shaped debris flow drainage canal.By theory analysis,it indicates that the optimal configuration parameter is only related to the side slope coefficient and the bottom transverse slope coefficient.For this study,the Heishui Gully,a first-order tributary of the lower Jinsha River,was used as an example to design the optimal cross-section of the drainage canal of debris flow.

Large eddy simulation of supersonic flow in ducts with complex cross-sections

Large Eddy Simulation(LES)has been employed for the investigation of supersonic flow characteristics in five ducts with varying cross-sectional geometries.The numerical results reveal that flow channel configurations exert a considerable influence on the mainstream flow and the near-wall flow behavior.In contrast to straight ducts,square-to-circular and rectangular-to-circular ducts exhibit thicker boundary layers and a greater presence of vortex structures.Given the same inlet area,rectangular-to-circular ducts lead to higher flow drag force and total pressure loss than square-to-circular ducts.Characterized by the substantial flow separation and shock waves,the"S-shaped duct shows significant vertically-asymmetric characteristics.

Knowledge,attitude,and practice of patients living with inflammatory bowel disease:A cross-sectional study

BACKGROUND Patients with inflammatory bowel diseases(IBDs)generally have poor knowledge,attitude,and practice of their disease,while the data from China are lacking.AIM To address this knowledge disparity among Chinese patients with IBD.METHODS This web-based,cross-sectional study was conducted on a cohort of IBD patients who visited the Second Affiliated Hospital of Wenzhou Medical University between December 2022 and February 2023.Their socio-demographic information and the knowledge,attitude,and practice scores were collected and estimated using a self-designed questionnaire.Pearson’s correlation analysis was used to determine the pairwise correlations among knowledge,attitude,and practice scores.A multivariate logistic regression analysis was further performed to determine the independent factors associated with their knowledge,attitude,and practice scores.RESULTS A total of 353 patients(224 males)with IBD completed the questionnaires.The mean knowledge,attitude,and practice scores were 10.05±3.46(possible range:0-14),41.58±5.23(possible range:0-56),44.20±7.39(possible range:0-56),respectively,indicating good knowledge,positive attitude,and proactive practice toward IBD.Pearson’s correlation analysis showed that the knowledge score had significant positive correlations with the attitude score(r=0.371,P<0.001)and practice score(r=0.100,P<0.001).The attitude score had a significant positive correlation with the practice score(r=0.452,P<0.001).Moreover,multivariate logistic regression analysis showed that aged 30-40 years[odds ratio(OR)=4.06,95%confidence interval(CI):1.04-15.82,P=0.043],middle school education(OR=3.98,95%CI:1.29-12.33,P=0.017),high school/technical secondary school education(OR=14.06,95%CI:3.92-50.38,P<0.001),and junior college/bachelor’s degree and above education(OR=15.20,95%CI:4.15-55.650,P<0.001)were independently associated with good knowledge.The higher knowledge score was independently associated with a positive attitude(OR=1.23,95%CI:1.11-1.36,P<0.001).The higher attitude score was independently associated with proactive practice(OR=1.20,95%CI:1.11-1.30,P<0.001).CONCLUSION Chinese patients with IBD might have good knowledge,a positive attitude,and proactive practice toward their disease.However,a small number of specific items require education.

Exercise, Depression, and Anxiety in Young People: A Cross-Sectional Survey

Background:Depression and anxiety are highly prevalent among adolescents and have multiple negative effects on their physical and mental health.While exercise can reduce the symptoms of depression and anxiety,the rela-tionship between mental disorders among American university students has been rarely reported.Accordingly,this study aimed to explore the association between exercise,depression and anxiety among American university students in the 2018–2019 academic year.Methods:In this cross-sectional study,the association between exercise,depression and anxiety was investigated in a large representative sample of American university students.In the 2018–2019 academic year,university students aged 18+years old from 79 institutions participated in this school-based study.The questionnaire included measurements of demographic characteristics,exercise,and validated screen instructions for depression(PHQ-9)and anxiety(GAD-7).The multivariable logistic regression model was applied to explore the association between exercise,depression and anxiety.Results:A total of 62026 indivi-duals(31.9%males)participated in this survey,and the prevalence of exercising at least 5 h each day was 24.6%.The prevalence of depression and anxiety was 25.7%and 22.3%,respectively.In the multivariable logistic regres-sion model,compared to exercise at least 5 h daily,participants whose exercise less than 1 h daily(OR=1.31[1.29,1.33],p<0.05),2 to 3 h daily(OR=1.13[1.11,1.15],p<0.05),3 to 4 h daily(OR=1.04[1.02,1.06],p<0.05),were correlated with greater odds of depression,while exercise less than 1 h daily(OR=1.23[1.21,1.25],p<0.05),2 to 3 h daily(OR=1.10[1.08,1.12],p<0.05)were significantly correlated with great-er odds of anxiety.Conclusion:Higher levels of exercise are associated with lower risk of depression and anxiety among American university students.Community and school interventions should focus on increasing exercise participation in university populations to promote both physical and mental health.

Numerical Analysis of Flow-Induced Vibration and Noise Generation in a Variable Cross-Section Channel

Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode shapes,and structure-borne noise in such systems are investigated in this study.The results demonstrate that the maximum displacement and equivalent stress are located in the part with variable cross-sectional area.The aver-age excitation force on theflow channel wall increases with theflow velocity.The maximum excitation force occurs in the range of 0–20 Hz,and then it decreases gradually in the range of 20–1000 Hz.Additionally,as theflow velocity rises from 1 to 3 m/s,the overall sound pressure level associated with theflow-induced noise grows from 49.37 to 66.37 dB.Similarly,the overall sound pressure level associated with the structure-borne noise rises from 40.27 to 72.20 dB.When theflow velocity is increased,the increment of the structure-borne noise is higher than that of theflow-induced noise.

Effect of cross-section shape of rotating chute on particle movement and distribution at the throat of a bell-less top blast furnace

Rotating chutes are widely used to control the burden distribution and enhance the gas distribution in a blast furnace.The chute cross-section shape has a significant effect on the particle movement and distribution.Therefore,this study developed a three-dimensional model of a blast furnace top with rotating chute using the discrete element method.The effect of different chute shapes on the particle movement and radial burden distribution was then investigated.The results showed that the burden stream height at the chute discharge agrees well with the burden stream thickness at the burden surface.A semicircular chute had the largest main striking point,where the chute discharge joins the burden surface,and trapezoidal and rectangular chutes had successively smaller MSPs.The semicircular chute helped to obtain a uniform radial size distribution.The trapezoidal chute helped form an aggregated burden stream at low rotating speeds,while the rectangular shape chute achieved this at higher rotating speeds and different chute angles.