Distribution of the Classification Traits in the F_2 Progeny of Two Crosses of indica/japonica in Rice (Oryza sativa)

Comparison of seed setting rate, plant height and Cheng's morphological traits were made between the F_2 progeny of indica-japonica hybrids, 02428/Pei'ai 64 and Taichung 65/Teqing. There existed resemblance normal distribution in plant height, and the distribution had no relationship with the seed setting rate and plant height in F_1 progeny, suggesting that there were no gametic selection for the plant height in the F_2 progeny of indica-japoniea hybrids. An average seed setting rate of the F_2 was equal to the F_1 populations in the recombination of 02428/Pei'ai 64 in which there was an excellent cross compatibility, but the remarkable increase in the seed setting rate from the F_1 to F_2 in Taichung 65/Teqing, indicating that gametic selection only took place in the indica-japonica crosses with low cross compatibility while null or little in the hybrids with high compatibility. There were many intermediate types among the leaf pubescence, color of hull at heading, and length of the first and second panicle internode, and these Cheng's morphological traits was distributed normally; there were also a little intermediate types in hull hairness and phenol reaction with bi-peak distribution; while length to width ratio of grain was inclined to the japonica types obviously showing a skewed distribution in the F2 population. Although Cheng's morphological traits in F_2 populations had inconsistent distribution types, Cheng's morphological traits index showed normal distribution, which suggested that intermediate types, i.e. indicalinous or japonicalinous, were primary in F_2 population.

Pseudogamous Apomixis in Maize and Sorghum in Diploid-Tetraploid Crosses

Apomictic seed development is a complex process including formation of unreduced embryo sac,parthenogenetic embryo development from the egg cell,and endosperm formation either autonomously,or due to fertilization of polar nuclei by the sperm(under pseudogamous form of apomixis).In the latter case,an obstacle to the normal endosperm development is disturbance of maternal(m)-to-paternal(p)genomic ratio 2m:1p that occurs in the cases of pollination of unreduced embryo sac with haploid sperms.Usage of tetraploid pollinators can overcome this problem because in such crosses maternal-to-paternal genomic ratio is 4m:2p that provides formation of kernels with plump endosperm.Using tetraploid lines as pollen parents we observed formation of plump kernels on the ears and panicles of diploid maize and sorghum accessions.These kernels had hybrid endosperm and diploid maternal-type embryo or hybrid embryo with different ploidy level(2n,3n,4n).The frequencies of plump kernels on the ear ranged from 0.2-0.3%to 5.7-6.2%counting from the number of ovaries.Maternal-type plants were found in two maize lines,their frequency varying from 10.7 to 37.5%of the progeny plants.In CMS-lines of sorghum pollinated with tetraploid sorghum accessions,the frequency of plump kernels ranged from 0.6 to 14.0%counting from the number of ovaries;the frequency of maternal-type plants varied from 33.0 up to 96.1%.The hybrid nature of endosperm of the kernels that gave rise to maternal-type plants has been proved by marker gene expression and by SDS-electrophoresis of endosperm proteins.These data testify to variable modes of seed formation under diploid×tetraploid crosses in maize and sorghum both by amphi-and by apomixis.Therefore,usage of tetraploid pollinators might be a promising approach for isolation of apomixis in maize and sorghum accessions.

Genetic analysis of quality traits in intersubspecies crosses of rice

Indica and japonica rices are two subspecies ofAsia cultivated rice.Their grain qualities exista significant difference.The objective of thispaper is to study the genetic control of qualitytraits in intersubspecies crosses of rice.In 1991,4 japonica varieties with widecompatibility,PC311,Zhenxiqiuguang,Lun-hui 422,and Ce 03 were crossed with 5 indicavarieties,3037,Zaoxiandang 18,IR36,Minghui 63,and Yangdao 4 according to NC(?)design.The 20 hybrids using japonica as ma-

Linkage analysis and integrated software GAPL for pure-line populations derived from four-way and eight-way crosses

Pure lines derived from multiple parents provide abundant variation for genetic study.However,efficient genetic analysis methods and user-friendly software are still lacking.In this study, we developed linkage analysis methods and integrated analysis software for pure-line populations derived from four-way and eight-way crosses.First, polymorphic markers are classified into different categories according to the number of identifiable alleles in the inbred parents.Expected genotypic probability is then derived for each pair of complete markers, and based on them a maximum likelihood estimate(MLE) of recombination frequency is calculated.An EM algorithm is proposed for calculating recombination frequencies in scenarios that at least one marker is incomplete.A linkage map can thus be constructed using estimated recombination frequencies.We describe a software package called GAPL for recombination frequency estimation and linkage map construction in multi-parental pure-line populations.Both simulation studies and results from a reported four-way cross recombinant inbred line population demonstrate that the proposed method and software can build more accurate linkage maps in shorter times than other published software packages.The GAPL software is freely available from www.isbreeding.net and can also be used for QTL mapping in multi-parental populations.

Selection Effects of Soil Fertility on the Progenies of Soybean Crosses

The F2, F3, families and F4 lines of six soybean crosses, were selected successively under high-and low - fertility sites with the relection objective of high yield and the method of pedigree was used. Two best F4 - derived lines were chosen from each of the six crosses under both high-and low-fertility for use in this study. In 1995, the total 24 lines were tested in high, medium and low fertility sites with the same experimental design (CRB) to study the selcctoin effects of high and low - fertility. The results suggested that high- and low-fertility had different selection effects. High fertility was more effective for selecting lines, which had higher yield under high-fertility and lower yield under low-fertility; low-fertility was better for selecting lines, which had higher yield under low-fertility and lower yield under low-fertility, and high fertility was somewhat better than low fertility for selecting lines, which had higher yield under both high and low-fertility. It revealed that the lines selected from high-fertility had superior yield potential. The lines selected from high-fertility had shorter plant height, more nodes on main stem, fewer branches, higher seed-stem ratio. The reverse was true for the lines selected from low-fertility . The lodging-resistance of the lines selected from highfertility was greater than that of the lines from low-fertility. The soil fertility level of breeding nursery should be chosen according to the breeding objective.

Evaluation of some Newly Developed Diploid Hybrids and their Breeding Value in 4x-2x Crosses

The narrow genetic base in potato (Solanum tuberosum L.) limits the progress in cultivar development.The rich diploid germplasm in the origin center of potato provide a unique resource for improvement of tetraploid potatoes.Seven newly developed diploid hybrids with 2n pollen production,all of which have S. phureja background,were developed and evaluated for their value in potato breeding.They were crossed as male parnets to six tetraploid Solanum tuberosum cultivars,and seeds in large quantity from eleven crosses were obtained.Main agronomic traits,such as tuber yield,tuber number,mean tuber weight,tuber shape,eye depth,skin smoothness,flesh color,and specific gravity,were measured for 4x 2x tetraploid progenies in seedling generation,and their parents as well.All of the diploid hybrids had some merit for specific traits and the DH39 was more promising;high specific gravity trait in some diploid hybrids was successfully introgressed into tetroploid progenies via 4x 2x crosses.These diploid hybrids have potential value in potato breeding.

Floquet spectrum and universal dynamics of a periodically driven two-atom system

We investigate the Floquet spectrum and excitation properties of a two-ultracold-atom system with periodically driven interaction in a three-dimensional harmonic trap.The interaction between the atoms is changed by varying the s-wave scattering length in two ways,the cosine and the square-wave modulations.It is found that as the driving frequency increases,the Floquet spectrum exhibits two main features for both modulations,the accumulating and the spreading of the quasienergy levels,which further lead to different dynamical behaviors.The accumulation is associated with collective excitations and the persistent growth of the energy,while the spread indicates that the energy is bounded at all times.The initial scattering length,the driving frequency and amplitude can all significantly change the Floquet spectrum as well as the dynamics.However,the corresponding relation between them is valid universally.Finally,we propose a mechanism for selectively exciting the system to one specific state by using the avoided crossing of two quasienergy levels,which could guide preparation of a desired state in experiments.

Application of CFD and FEA Coupling to Predict Structural Dynamic Responses of A Trimaran in Uni-and Bi-Directional Waves

To predict the wave loads of a flexible trimaran in different wave fields,a one-way interaction numerical simulation method is proposed by integrating the fluid solver(Star-CCM+)and structural solver(Abaqus).Differing from the existing coupled CFD-FEA method for monohull ships in head waves,the presented method equates the mass and stiffness of the whole ship to the hull shell so that any transverse and longitudinal section stress of the hull in oblique waves can be obtained.Firstly,verification study and sensitivity analysis are carried out by comparing the trimaran motions using different mesh sizes and time step schemes.Discussion on the wave elevation of uni-and bi-directional waves is also carried out.Then a comprehensive analysis on the structural responses of the trimaran in different uni-directional regular wave and bi-directional cross sea conditions is carried out,respectively.Finally,the differences in structural response characteristics of trimaran in different wave fields are studied.The results show that the present method can reduce the computational burden of the two-way fluid-structure interaction simulations.

Identifying influential spreaders in complex networks based on density entropy and community structure

In recent years,exploring the relationship between community structure and node centrality in complex networks has gained significant attention from researchers,given its fundamental theoretical significance and practical implications.To address the impact of network communities on target nodes and effectively identify highly influential nodes with strong propagation capabilities,this paper proposes a novel influential spreaders identification algorithm based on density entropy and community structure(DECS).The proposed method initially integrates a community detection algorithm to obtain the community partition results of the networks.It then comprehensively considers the internal and external density entropies and degree centrality of the target node to evaluate its influence.Experimental validation is conducted on eight networks of varying sizes through susceptible–infected–recovered(SIR)propagation experiments and network static attack experiments.The experimental results demonstrate that the proposed method outperforms five other node centrality methods under the same comparative conditions,particularly in terms of information spreading capability,thereby enhancing the accurate identification of critical nodes in networks.

Tailoring the texture and mechanical properties of 3%Y_(2)O_(3)p/ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing

3%Y_(2)O_(3)p/ZGK200 composites were subjected to unidirectional rolling(UR)and cross rolling(CR)at 400℃and 350℃followed by annealing at 300℃for 1 h.The microstructure,texture and mechanical properties of rolled and annealed composites were systematically studied.The rolled composites exhibited a heterogeneous microstructure,consisting of deformed grains elongated along rolling direction(RD)and Y_(2)O_(3)particles bands distributed along RD.After annealing,static recrystallization(SRX)occurred and most deformed grains transformed into equiaxed grains.A non-basal texture with two strong T-texture components was obtained after UR while a non-basal elliptical/circle texture with circle multi-peaks was obtained after CR,indicating that rolling path had great influences on texture of the composites.After annealing process,R-texture component disappeared or weakened,as results,a non-basal texture with double peaks tilting from normal direction(ND)to transverse direction(TD)and a more random non-basal texture with circle multi-peaks were obtained for UR and CR composites,respectively.The yield strength of rolled composites after UR showed obvious anisotropy along RD and TD while a low anisotropic yield strength was obtained after CR.Some Y_(2)O_(3)particles broke during rolling.The fracture of the composites was attributed to the existence of Y_(2)O_(3)clusters and interfacial debonding between particles and matrix during tension,as a result,the ductility was not as superior as matrix alloy.

State-selective charge exchange cross sections in collisions of highly-charged sulfur ions with helium and molecular hydrogen

The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.

Theoretical investigation of electron-impact ionization of W8+ion

The electron-impact single ionization cross section for W8+ion has been calculated using flexible atomic code,employing the level-to-level distorted-wave approximation.This calculations takes into account contributions form both direct ionization(DI)and excitation autoionization(EA).However,the theoretical predictions,based solely on the ground state,tends to underestimate the experimental values.This discrepancy can be mitigated by incorporation contributions from excited states.We extended the theoretical analysis,including the contributions from the long-lived metastable states with lifetimes exceeding 1.5×10-5 s.We employed two statistical models to predict the fraction of ground state ions in the parent ion beam.Assuming a 79%fraction of parent ions in ground configuration,the experiment measurements align with the predictions.Furthermore we derived the theoretical cross-section for the ground state as correlated plasma rate coefficients,and compared it with existing data.Despite the uncertainty in our calculations,our results are still acceptable.

Nonlinear Registration of Brain Magnetic Resonance Images with Cross Constraints of Intensity and Structure

Many deep learning-based registration methods rely on a single-stream encoder-decoder network for computing deformation fields between 3D volumes.However,these methods often lack constraint information and overlook semantic consistency,limiting their performance.To address these issues,we present a novel approach for medical image registration called theDual-VoxelMorph,featuring a dual-channel cross-constraint network.This innovative network utilizes both intensity and segmentation images,which share identical semantic information and feature representations.Two encoder-decoder structures calculate deformation fields for intensity and segmentation images,as generated by the dual-channel cross-constraint network.This design facilitates bidirectional communication between grayscale and segmentation information,enabling the model to better learn the corresponding grayscale and segmentation details of the same anatomical structures.To ensure semantic and directional consistency,we introduce constraints and apply the cosine similarity function to enhance semantic consistency.Evaluation on four public datasets demonstrates superior performance compared to the baselinemethod,achieving Dice scores of 79.9%,64.5%,69.9%,and 63.5%for OASIS-1,OASIS-3,LPBA40,and ADNI,respectively.

Absolute partial and total ionization cross sections of carbon monoxide with electron collision from 350 eV to 8000 eV

The absolute partial and total cross sections for electron impact ionization of carbon monoxide are reported for electron energies from 350 eV to 8000 eV.The product ions(CO^(+),C^(+),O^(+),CO^(2+),C^(2+),and O^(2+))are measured by employing an ion imaging mass spectrometer and two ion-pair dissociation channels(C^(+)+O^(+)and C^(2+)+O^(+))are identified.The absolute cross sections for producing individual ions and their total,as well as for the ion-pair dissociation channels are obtained by normalizing the data of CO^(+)to that of Ar^(+)from CO-Ar mixture target with a fixed 1:1 ratio.The overall errors are evaluated by considering various kinds of uncertainties.A comprehensive comparison is made with the available data,which shows a good agreement with each other over the energy ranges that are overlapped.This work presents new cross-section data with electron energies above 1000 eV.

A Practical Approach for Missing Wireless Sensor Networks Data Recovery

In wireless sensor networks(WSNs),the performance of related applications is highly dependent on the quality of data collected.Unfortunately,missing data is almost inevitable in the process of data acquisition and transmission.Existing methods often rely on prior information such as low-rank characteristics or spatiotemporal correlation when recovering missing WSNs data.However,in realistic application scenarios,it is very difficult to obtain these prior information from incomplete data sets.Therefore,we aim to recover the missing WSNs data effectively while getting rid of the perplexity of prior information.By designing the corresponding measurement matrix that can capture the position of missing data and sparse representation matrix,a compressive sensing(CS)based missing data recovery model is established.Then,we design a comparison standard to select the best sparse representation basis and introduce average cross-correlation to examine the rationality of the established model.Furthermore,an improved fast matching pursuit algorithm is proposed to solve the model.Simulation results show that the proposed method can effectively recover the missing WSNs data.

A Simplified Method for the Stress Analysis of Underground Transfer Structures Crossing Multiple Subway Tunnels

According to the design specifications,the construction of extended piles involves traversing the tunnel’s upper region and extending to the underlying rock layer.To address this challenge,a subterranean transfer structure spanning multiple subway tunnels was proposed.Deliberating on the function of piles in the transfer structure as springs with axial and bending stiffness,and taking into account the force balance and deformation coordination conditions of beams and plates within the transfer structure,we established a simplified mechanical model that incorporates soil stratification by combining it with the Winkler elastic foundation beam model.The resolved established simplifiedmechanicalmodel employed finite difference technology and the Newton-Simpsonmethod,elucidating the mechanical mechanism of the transfer structure.The research findings suggest that the load carried by the upper structural columns can be transferred to the pile foundation beneath the beams through the transfer structure,subsequently reaching the deep soil layer and ensuring minimal impact on adjacent tunnels.The established simplified analysis method can be used for stress analysis of the transfer structure,concurrently considering soil stratification,pile foundation behavior,and plate action.The pile length,pile section size,and beam section size within the transfer structure should account for the characteristics of the upper load,ensuring an even distribution of the beam bending moment.

Coulomb-assisted nonlocal electron transport between two pairs of Majorana bound states in a superconducting island

We investigate the nonlocal transport modulated by Coulomb interactions in devices comprising two interacting Majorana wires,where both nanowires are in proximity to a mesoscopic superconducting(SC)island.Each Majorana bound state(MBS)is coupled to one lead via a quantum dot with resonant levels.In this device,the nonlocal correlations can be induced in the absence of Majorana energy splitting.We find that the negative differential conductance and giant current noise cross correlation could be induced,due to the interplay between nonlocality of MBSs and dynamical Coulomb blockade effect.This feature may provide a signature for the existence of the MBSs.

Measurement of the neutron-induced total cross sections of ^(nat)Pb from 0.3 eV to 20 MeV on the Back-n at CSNS

The neutron-induced total cross sections of natural lead have been measured in a wide energy range(0.3 eV-20 MeV)on the back-streaming white neutron beamline(Back-n)at the China Spallation Neutron Source.Neutron energy was determined by the neutron total cross-section spectrometer using the time-of-flight technique.A fast multi-cell fission chamber was used as the neutron detector,and a 10-mm-thick high-purity natural lead sample was employed for the neutron transmission measurements.The on-beam background was determined using Co,In,Ag,and Cd filters.The excitation function of ^(nat)Pb(n,tot)reaction below 20 MeV was calculated using the TALYS-1.96 nuclear-reaction modeling program.The present results were compared with previous results,the evaluated data available in the five major evaluated nuclear data libraries(i.e.,ENDF/B-VIII.0,JEFF-3.3,JENDL-5,CENDL-3.2,and BROND-3.1),and the theoretical calculation curve.Good agreement was found between the new results and those of previous experiments and with the theoretical curves in the corresponding region.This measurement obtained the neutron total cross section of natural lead with good accuracy over a wide energy range and added experimental data in the resonance energy range.This provides more reliable experimental data for nuclear engineering design and nuclear data evaluation of lead.

Frequency Domain Fatigue Evaluation on SCR Girth-Weld Based on Structural Stress

The Steel Catenary Riser(SCR)is a vital component for transporting oil and gas from the seabed to the floating platform.The harsh environmental conditions and complex platform motion make the SCR’s girth-weld prone to fatigue failure.The structural stress fatigue theory and Master S-N curve method provide accurate predictions for the fatigue damage on the welded joints,which demonstrate significant potential and compatibility in multi-axial and random fatigue evaluation.Here,we propose a new frequency fatigue model subjected to welded joints of SCR under multiaxial stress,which fully integrates the mesh-insensitive structural stress and frequency domain random process and transforms the conventional welding fatigue technique of SCR into a spectrum analysis technique utilizing structural stress.Besides,a full-scale FE model of SCR with welds is established to obtain the modal structural stress of the girth weld and the frequency response function(FRF)of modal coordinate,and a biaxial fatigue evaluation about the girth weld of the SCR can be achieved by taking the effects of multi-load correlation and pipe-soil interaction into account.The research results indicate that the frequency-domain fatigue results are aligned with the time-domain results,meeting the fatigue evaluation requirements of the SCR.