A Simplified Method for the Stress Analysis of Underground Transfer Structures Crossing Multiple Subway Tunnels

According to the design specifications,the construction of extended piles involves traversing the tunnel’s upper region and extending to the underlying rock layer.To address this challenge,a subterranean transfer structure spanning multiple subway tunnels was proposed.Deliberating on the function of piles in the transfer structure as springs with axial and bending stiffness,and taking into account the force balance and deformation coordination conditions of beams and plates within the transfer structure,we established a simplified mechanical model that incorporates soil stratification by combining it with the Winkler elastic foundation beam model.The resolved established simplifiedmechanicalmodel employed finite difference technology and the Newton-Simpsonmethod,elucidating the mechanical mechanism of the transfer structure.The research findings suggest that the load carried by the upper structural columns can be transferred to the pile foundation beneath the beams through the transfer structure,subsequently reaching the deep soil layer and ensuring minimal impact on adjacent tunnels.The established simplified analysis method can be used for stress analysis of the transfer structure,concurrently considering soil stratification,pile foundation behavior,and plate action.The pile length,pile section size,and beam section size within the transfer structure should account for the characteristics of the upper load,ensuring an even distribution of the beam bending moment.

Magnetic Field Curves and Magnetic Equipotential Surfaces around Crossing Electrical Wires Replacing Classical Magnetic Field Lines

This article is based on a recent model specifically defining magnetic field values around electrical wires. With this model, calculations of field around parallel wires were obtained. Now, this model is extended with the new concept of magnetic equipotential surface to magnetic field curves around crossing wires. Cases of single, double, and triple wires are described. Subsequent article will be conducted for more general scenarios where wires are neither infinite nor parallel.

Evolution of polarization singularities accompanied by avoided crossing in plasmonic system

The evolution of polarization singularities supported in a one-dimensional periodic plasmonic system is studied.The lateral inversion symmetry of the system,which breaks the in-plane inversion symmetry and up-down mirror symmetry simultaneously,yields abundant polarization states.A complete evolution process with geometry for the polarization states is traced.In the evolution,circularly polarized points(C points)can stem from 3 different processes.In addition to the previously reported processes occurring in an isolated band,a new type of C point appearing in two bands simultaneously due to the avoided band crossing,is observed.Unlike the dielectric system with a similar structure which only supports at-Γbound states in the continuum(BICs),accidental BICs off theΓpoint are realized in this plasmonic system.This work provides a new scheme of polarization manipulation for the plasmonic systems.

LEO支架构建crossing Y形支架辅助栓塞治疗颅内动脉分叉部宽颈动脉瘤的安全性和有效性分析

目的探讨使用LEO支架构建crossing Y形支架辅助栓塞治疗颅内动脉分叉部宽颈动脉瘤的安全性和有效性。方法收集2018-2022年陆军军医大学第一附属医院神经外科收治的336例颅内动脉分叉部宽颈动脉瘤患者的临床资料及随访影像,其中55例患者采用LEO支架构建crossing Y形支架辅助栓塞治疗。观察使用LEO支架构建crossing Y形支架辅助栓塞治疗动脉瘤的成功率、手术相关并发症、围手术期缺血和出血并发症的发生率。采用改良Rankin评分(modified Rankin scale,mRS)量表评价患者出院及临床随访时的神经功能恢复情况,使用术后即刻及随访脑血管造影Raymond分级评估栓塞效果、术后随访CTA及MRA评估有无复发。结果55例颅内动脉分叉部宽颈动脉瘤患者均成功栓塞,未见支架打开不良、支架打折等不良事件;术中支架内血栓形成1例(1.82%),迟发性缺血2例(3.64%),未见围手术期出血事件。术后即刻造影致密栓塞(RaymondⅠ级)50例(90.91%),瘤颈残留(RaymondⅡ级)3例(5.45%),RaymondⅢ级2例(3.64%)。40例患者于术后6~24个月获得影像随访,造影RaymondⅠ级38例(95%),RaymondⅡ级2例(5%);9例患者行CTA或MRA复查未见复发;术后随访动脉瘤栓塞效果较术后即刻好转。出院时mRS评分0~1分50例,2分1例,3分1例,4分2例,5分1例。获得4~24个月临床随访预后,mRS评分0~1分50例,2分2例,3分1例,4分1例,6分1例;出院时mRS评分较差患者临床随访mRS评分好转。结论使用LEO支架构建crossing Y形支架辅助栓塞治疗颅内动脉分叉部宽颈动脉瘤成功率及安全性高,复发率低,围手术期缺血事件发生率低,近期疗效可,远期疗效待进一步观察。

The asymptotic relation between the first crossing point and the last exit time of Gaussian order statistics sequences

In this paper,we study the asymptotic relation between the first crossing point and the last exit time for Gaussian order statistics which are generated by stationary weakly and strongly dependent Gaussian sequences.It is shown that the first crossing point and the last exit time are asymptotically independent and dependent for weakly and strongly dependent cases,respectively.The asymptotic relations between the first crossing point and the last exit time for stationary weakly and strongly dependent Gaussian sequences are also obtained.

Possibilities for the synthesis of superheavy element Z=121 in fusion reactions

Based on the dinuclear system model,the calculated evaporation residue cross sections matched well with the current experimental results.The synthesis of superheavy elements Z=121 was systematically studied through combinations of stable projectiles with Z=21-30 and targets with half-lives exceeding 50 d.The influence of mass asymmetry and isotopic dependence on the projectile and target nuclei was investigated in detail.The reactions^(254)Es(^(46)Ti,3n)^(297)121 and^(252)Es(^(46)Ti,3n)^(295)121 were found to be experimentally feasible for synthesizing superheavy element Z=121,with maximal evaporation residue cross sections of 6.619 and 4.123 fb at 219.9 and 223.9 MeV,respectively.

Frequency Domain Fatigue Evaluation on SCR Girth-Weld Based on Structural Stress

The Steel Catenary Riser(SCR)is a vital component for transporting oil and gas from the seabed to the floating platform.The harsh environmental conditions and complex platform motion make the SCR’s girth-weld prone to fatigue failure.The structural stress fatigue theory and Master S-N curve method provide accurate predictions for the fatigue damage on the welded joints,which demonstrate significant potential and compatibility in multi-axial and random fatigue evaluation.Here,we propose a new frequency fatigue model subjected to welded joints of SCR under multiaxial stress,which fully integrates the mesh-insensitive structural stress and frequency domain random process and transforms the conventional welding fatigue technique of SCR into a spectrum analysis technique utilizing structural stress.Besides,a full-scale FE model of SCR with welds is established to obtain the modal structural stress of the girth weld and the frequency response function(FRF)of modal coordinate,and a biaxial fatigue evaluation about the girth weld of the SCR can be achieved by taking the effects of multi-load correlation and pipe-soil interaction into account.The research results indicate that the frequency-domain fatigue results are aligned with the time-domain results,meeting the fatigue evaluation requirements of the SCR.

Cross section determination of^(27)Al(n,2n)^(26)Al reaction induced by 14-MeV neutrons uniting with D-T neutron activation and AMS techniques

Aluminum is the primary structural material in nuclear engineering,and its cross section induced by 14-MeV neutrons is of great significance.To address the issue of insufficient accuracy for the^(27)Al(n,2n)^(26)Al reaction cross section,the activation method and accelerator mass spectrometry(AMS)technique were used to determine the^(27)Al(n,2n)^(26)Al cross section,which could be used as a D-T plasma ion temperature monitor in fusion reactors.At the China Academy of Engineering Physics,neutron activation was performed using a K-400 neutron generator produced by the T(d,n)4He reaction.The^(26)Al∕^(27)Al isotope ratios were measured using the newly installed GYIG 1 MV AMS at the Institute of Geochemistry,Chinese Academy of Sciences.The neutron flux was monitored by measuring the activity of 92mNb produced by the 93Nb(n,2n)92mNb reaction.The measured results were compared with available data in the experimental nuclear reaction database,and the measured values showed a reasonable degree of consistency with partially available literature data.The newly acquired cross-sectional data at 12 neutron energy points through systematic measurements clarified the divergence,which has two different growth trends from the existing experimental values.The obtained results are also compared with the corresponding evaluated database,and the newly calculated excitation functions with TALYS−1.95 and EMPIRE−3.2 codes,the agreement with CENDL−3.2,TENDL-2021 and EMPIRE−3.2 results are generally acceptable.A substantial improvement in the knowledge of the^(27)Al(n,2n)^(26)Al reaction excitation function was obtained in the present work,which will lay the foundation for the diagnosis of the fusion ion temperature,testing of the nuclear physics model,evaluation of nuclear data,etc.

Frequent recombination in Cynoglossus abbreviatus(Pleuronectiformes:Cynoglossidae)ribosomal 18S rDNA

The conventional theory of concerted evolution has been used to explain the lack of sequence variation in ribosomal RNA(rRNA)genes across diverse eukaryotic species.However,recent investigations into rRNA genes in flatfish genome have resulted in controversial findings.This study focuses on 18S rRNA genes of the widely distributed tongue sole,Cynoglossus abbreviatus(Pleuronectiformes:Cynoglossidae),aiming to explore sequence polymorphism.Five distinct 18S rDNA sequence types(Type A,B,R1,R2,and R3)were identified,suggesting a departure from concerted evolution.A combination of general criteria and variations in highly conserved regions were employed to detect pseudogenes.The results pinpointed Type A sequences as potential pseudogenes due to significant sequence variations and deviations in secondary structure within highly conserved regions.Three types(Type R1,R2,and R3)were identified as recombinants between Type A and B sequences,with simple crossing over and gene conversion as the most likely recombination mechanisms.These findings not only contribute to rRNA pseudogene identification but also shed light on the evolutionary dynamics of rRNA genes in teleost genomes.

Floquet spectrum and universal dynamics of a periodically driven two-atom system

We investigate the Floquet spectrum and excitation properties of a two-ultracold-atom system with periodically driven interaction in a three-dimensional harmonic trap.The interaction between the atoms is changed by varying the s-wave scattering length in two ways,the cosine and the square-wave modulations.It is found that as the driving frequency increases,the Floquet spectrum exhibits two main features for both modulations,the accumulating and the spreading of the quasienergy levels,which further lead to different dynamical behaviors.The accumulation is associated with collective excitations and the persistent growth of the energy,while the spread indicates that the energy is bounded at all times.The initial scattering length,the driving frequency and amplitude can all significantly change the Floquet spectrum as well as the dynamics.However,the corresponding relation between them is valid universally.Finally,we propose a mechanism for selectively exciting the system to one specific state by using the avoided crossing of two quasienergy levels,which could guide preparation of a desired state in experiments.

Sacrificial piles as a countermeasure against local scour around underwater pipelines

Local scour around pipelines crossing rivers or in marine environments is a significant concern.It can lead to failure of the pipelines resulting in environmental side effects and economic losses.This study developed an experimental method to reduce local scour around pipelines with a steady flow of clear water by installing cylindrical and cubical sacrificial piles.Three sizes of sacrificial piles were examined in a linear arrangement.Sacrificial piles were installed on the upstream side of the pipeline at three distances.Maximum scour depth reduction rates below the pipeline were computed.The results showed that sacrificial piles could protect a pipeline from local scour.A portion of scoured sediment around the sacrificial piles was deposited beneath the pipeline.This sediment accumulation reduced the scour depth beneath the pipeline.Analysis of the experimental results demonstrated that the size of piles(d),the spacing between piles,and the distance between the pipe and piles(Xp)were the variables that reduced the maximum scour beneath the pipeline with a diameter of D.For the piles with d=0.40D and 0.64D,X_(p)=4OD was the optimal distance to install a group of piles,and cubical piles could mitigate scour more effectively than cylindrical piles under similar conditions.For the piles with d=D,the greatest reduction in scour depth was achieved at X_(p)=50D with any desired spacings between piles,and cylindrical piles in this dimension could protect the pipeline against scour more effectively than cubical piles.

The n-resolved single-electron capture in slow O^(6+)-Ne collisions

A study of single-electron capture(SEC) in 18-240 keV O^(6+)-Ne collisions has been conducted employing a combination of experimental and theoretical methodologies.Utilizing a reaction microscope,state-selective SEC cross sections and projectile scattering angle distributions were obtained.The translational energy spectra for SEC reveal the prevailing capture into n=3 states of the projectile ion,with a minor contribution from n=4 states.Notably,as the projectile's energy increases,the relative contribution of SEC n=4 states increases while that of SEC n=3 states diminishes.Furthermore,we computed state-selective relative cross sections and angular differential cross sections employing the classical molecular Coulomb over-the-barrier model(MCBM) and the multichannel Landau-Zener(MCLZ) model.A discernible discrepancy between the state-selective cross sections from the two theoretical models is apparent for the considered impact energies.However,regarding the angular differential cross sections,an overall agreement was attained between the current experimental results and the theoretical results from the MCLZ model.

Cr-induced fusion reactions to synthesize superheavy elements

We investigated ^(50,52-54)Cr-induced fusion reactions for the synthesis of the superheavy element in the 104≤Z≤122 range.The cross sections produced in this investigation using ^(54)Cr projectiles were compared with those obtained in prior experiments.The estimated cross sections from this analysis are consistent with the findings of prior studies.From the current study,the predicted cross section was found to be 42fb at 236 MeV for ^(53)Cr+^(243)Am,23.2 fb at 236 MeV for ^(54)Cr+^(247)Cm,95.6 fb at 240 MeV for ^(53)Cr+248Bk,and 1.33 fb at 242 MeV for ^(53)Cr+250Cf.Consequently,these projected cross sections with excitation energy and beam energy will be useful in future Cr-induced fusion reaction investigations.

Asymmetric expression of CA2 and CA13 linked to calcification in the bilateral mandibular condyles cause crossed beaks in chickens

Crossed beak is a complex mode of inheritance with prevalence ranging from 0.2 to 7.4% in at least 12 chicken strains worldwide.To reveal the intrinsic factors causing crossed beaks,genes expression patterns in bilateral mandibular condyle between affected and normal birds were characterized by RNA sequencing analysis in the present studies.Crossed beak was induced by short length of unilateral mandibular ramus,and a total of 110differentially expressed genes were up-or down-regulated in the affected(short)mandibular condyle side as compared to the normal side.Carbonic anhydrase 2(CA2)and Carbonic anhydrase 13(CA13)were enriched in the carbonate dehydratase activity,and high-expressed in mandibular condyle and osteoblasts(P<0.05).However,both were low-expressed in short mandibular condyle side of affected birds(P<0.05).The carbonate dehydratase inhibitor experiments confirmed that there is positive association between the calcification and carbonic anhydrase isoenzymes.Quantitative analysis with cetylpyridinium chloride showed a decrease in calcification when the cells were transfected with an anti-CA13 shRNA.Our research suggested that CA2 and CA13 are down-calcified in shortside mandibular condyle,and caused mandibular ramus to grow slowly.CA2 and CA13 have the critical role in crossed beaks by regulating calcification of mandibular condyle.

Application of CFD and FEA Coupling to Predict Structural Dynamic Responses of A Trimaran in Uni-and Bi-Directional Waves

To predict the wave loads of a flexible trimaran in different wave fields,a one-way interaction numerical simulation method is proposed by integrating the fluid solver(Star-CCM+)and structural solver(Abaqus).Differing from the existing coupled CFD-FEA method for monohull ships in head waves,the presented method equates the mass and stiffness of the whole ship to the hull shell so that any transverse and longitudinal section stress of the hull in oblique waves can be obtained.Firstly,verification study and sensitivity analysis are carried out by comparing the trimaran motions using different mesh sizes and time step schemes.Discussion on the wave elevation of uni-and bi-directional waves is also carried out.Then a comprehensive analysis on the structural responses of the trimaran in different uni-directional regular wave and bi-directional cross sea conditions is carried out,respectively.Finally,the differences in structural response characteristics of trimaran in different wave fields are studied.The results show that the present method can reduce the computational burden of the two-way fluid-structure interaction simulations.

Identifying influential spreaders in complex networks based on density entropy and community structure

In recent years,exploring the relationship between community structure and node centrality in complex networks has gained significant attention from researchers,given its fundamental theoretical significance and practical implications.To address the impact of network communities on target nodes and effectively identify highly influential nodes with strong propagation capabilities,this paper proposes a novel influential spreaders identification algorithm based on density entropy and community structure(DECS).The proposed method initially integrates a community detection algorithm to obtain the community partition results of the networks.It then comprehensively considers the internal and external density entropies and degree centrality of the target node to evaluate its influence.Experimental validation is conducted on eight networks of varying sizes through susceptible–infected–recovered(SIR)propagation experiments and network static attack experiments.The experimental results demonstrate that the proposed method outperforms five other node centrality methods under the same comparative conditions,particularly in terms of information spreading capability,thereby enhancing the accurate identification of critical nodes in networks.

Tailoring the texture and mechanical properties of 3%Y_(2)O_(3)p/ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing

3%Y_(2)O_(3)p/ZGK200 composites were subjected to unidirectional rolling(UR)and cross rolling(CR)at 400℃and 350℃followed by annealing at 300℃for 1 h.The microstructure,texture and mechanical properties of rolled and annealed composites were systematically studied.The rolled composites exhibited a heterogeneous microstructure,consisting of deformed grains elongated along rolling direction(RD)and Y_(2)O_(3)particles bands distributed along RD.After annealing,static recrystallization(SRX)occurred and most deformed grains transformed into equiaxed grains.A non-basal texture with two strong T-texture components was obtained after UR while a non-basal elliptical/circle texture with circle multi-peaks was obtained after CR,indicating that rolling path had great influences on texture of the composites.After annealing process,R-texture component disappeared or weakened,as results,a non-basal texture with double peaks tilting from normal direction(ND)to transverse direction(TD)and a more random non-basal texture with circle multi-peaks were obtained for UR and CR composites,respectively.The yield strength of rolled composites after UR showed obvious anisotropy along RD and TD while a low anisotropic yield strength was obtained after CR.Some Y_(2)O_(3)particles broke during rolling.The fracture of the composites was attributed to the existence of Y_(2)O_(3)clusters and interfacial debonding between particles and matrix during tension,as a result,the ductility was not as superior as matrix alloy.

Bulked Segregant RNA-Seq Analysis of Pollinated Pistils Reveals Genes Influencing Spikelet Fertility in Rice

Prezygotic isolation is important for successful fertilization in rice, significantly affecting yield. This study focused on F_(5:6) generation plants derived from inter-subspecific crosses(Nipponbare × KDML105) with low(LS) and high seed-setting rates(HS), in which normal pollen fertility was observed. However, LS plants showed a reduced number of pollen grains adhering to the stigma and fewer pollen tubes reaching the ovules at 4-5 h post-pollination, compared with HS plants. Bulked segregant RNA-Seq analysis of pollinated pistils from the HS and LS groups revealed 249 and 473 differentially expressed genes(DEGs), respectively. Kyoto Encyclopedia of Genes and Genomes analysis of the HS and LS-specific DEGs indicated enrichment in metabolic pathways, pentose and glucuronate interconversions, and flavonoid biosynthesis. Several of these DEGs exhibited co-expression with pollen development genes and formed extensive clusters of co-expression networks. Compared with LS pistils, enzyme genes controlling pectin degradation, such as OsPME35 and OsPLL9, showed similar expression patterns, with higher levels in HS pistils pre-pollination. Os02g0467600, similar to cinnamate 4-hydroxylase gene(CYP73), involved in flavonoid biosynthesis, displayed higher expression in HS pistils post-pollination. Our findings suggest that OsPME35, OsPLL9, and Os02g0467600 contribute to prezygotic isolation by potentially modifying the stigma cell wall(OsPME35 and OsPLL9) and controlling later processes such as pollen-stigma adhesion(Os02g0467600) genes. Furthermore, several DEGs specific to HS and LS were co-localized with QTLs and functional genes associated with spikelet fertility. These findings provide valuable insights for further research on rice spikelet fertility, ultimately contributing to the development of high-yielding rice varieties.

State-selective charge exchange cross sections in collisions of highly-charged sulfur ions with helium and molecular hydrogen

The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.

Three‑dimensional numerical simulation of dynamic strength and failure mode of a rock mass with cross joints

To study the dynamic mechanical properties and failure characteristics of intersecting jointed rock masses with different joint distributions under confining pressure,considering the cross angleαand joint persistence ratioη,a numerical model of the biaxial Hopkinson bar test system was established using the finite element method–discrete-element model coupling method.The validity of the model was verified by comparing and analyzing it in conjunction with laboratory test results.Dynamics-static combined impact tests were conducted on specimens under various conditions to investigate the strength characteristics and patterns of crack initiation and expansion.The study revealed the predominant factors influencing intersecting joints with different angles and penetrations under impact loading.The results show that the peak stress of the specimens decreases first and then increases with the increase of the cross angle.Whenα<60°,regardless of the value ofη,the dynamic stress of the specimens is controlled by the main joint.Whenα≥60°,the peak stress borne by the specimens decreases with increasingη.Whenα<60°,the initiation and propagation of cracks in the cross-jointed specimens are mainly controlled by the main joint,and the final failure surface of the specimens is composed of the main joint and wing cracks.Whenα≥60°orη≥0.67,the secondary joint guides the expansion of the wing cracks,and multiple failure surfaces composed of main and secondary joints,wing cracks,and co-planar cracks are formed.Increasing lateral confinement significantly increases the dynamic peak stress able to be borne by the specimens.Under triaxial conditions,the degree of failure of the intersecting jointed specimens is much lower than that under uniaxial and biaxial conditions.