This study investigates the influence of using ground palm oil fuel ash(G-POFA) from 10%-30% as cement replacement(by weight) on the cement mortar's pH under various curing conditions. These findings were suppleme...This study investigates the influence of using ground palm oil fuel ash(G-POFA) from 10%-30% as cement replacement(by weight) on the cement mortar's pH under various curing conditions. These findings were supplemented by thermal gravimetric analysis(TGA). Moreover, the resistance of G-POFA blended cement mortars to water absorption and sorptivity was determined. Further, the k-value test was carried out to explain the pozzolanic and filler behavior of G-POFA and to support the results obtained from TGA. It was found that there was no significant impact of several curing conditions on the pH of mortars. The mortar with 10% G-POFA in replacement of cement(G-POFA-10) exhibited the best resistance against water absorption and sorptivity.展开更多
In the present work a niobium based complex cubic perovskite oxide Ca2AlNbO6 ceramic was produced, characterized and studied its stability in crude petroleum environment for inert ceramic embedding for temperature sen...In the present work a niobium based complex cubic perovskite oxide Ca2AlNbO6 ceramic was produced, characterized and studied its stability in crude petroleum environment for inert ceramic embedding for temperature sensors used in petroleum extraction. Ca2AlNbO6 ceramic powder was prepared through thermo-mechanical processing. Structural characteristics of calcined material was investigated by powder X-ray diffarctometry, which presented a single phase complex cubic perovskite structure with lattice parameter a = 7.6599 ?. Compacted discs of Ca2AlNbO6 ceramics were sintered in the temperature range 1250°C - 1350°C during 24 hours in ambient atmosphere. Microstructure of the sintered ceramics was studied by scanning electron microscopy and mechanical behavior was studied by Vicker’s microhardness testing. Ca2AlNbO6 ceramics sintered at 1350°C presented best results in terms of microstructural homogeneity and mechanical hardness. Therefore these sintered ceramics were submerged in crude petroleum for 60 days. Ceramics were taken out from the petroleum periodically and subjected to structural, microstructural and mechanical characterizations. Results showed that ceramics submerged in crude petroleum did not suffer any change at any stage of submersion. These characteristics make this material suitable for inert ceramic embedding for sensors used in petroleum extraction.展开更多
文摘This study investigates the influence of using ground palm oil fuel ash(G-POFA) from 10%-30% as cement replacement(by weight) on the cement mortar's pH under various curing conditions. These findings were supplemented by thermal gravimetric analysis(TGA). Moreover, the resistance of G-POFA blended cement mortars to water absorption and sorptivity was determined. Further, the k-value test was carried out to explain the pozzolanic and filler behavior of G-POFA and to support the results obtained from TGA. It was found that there was no significant impact of several curing conditions on the pH of mortars. The mortar with 10% G-POFA in replacement of cement(G-POFA-10) exhibited the best resistance against water absorption and sorptivity.
文摘In the present work a niobium based complex cubic perovskite oxide Ca2AlNbO6 ceramic was produced, characterized and studied its stability in crude petroleum environment for inert ceramic embedding for temperature sensors used in petroleum extraction. Ca2AlNbO6 ceramic powder was prepared through thermo-mechanical processing. Structural characteristics of calcined material was investigated by powder X-ray diffarctometry, which presented a single phase complex cubic perovskite structure with lattice parameter a = 7.6599 ?. Compacted discs of Ca2AlNbO6 ceramics were sintered in the temperature range 1250°C - 1350°C during 24 hours in ambient atmosphere. Microstructure of the sintered ceramics was studied by scanning electron microscopy and mechanical behavior was studied by Vicker’s microhardness testing. Ca2AlNbO6 ceramics sintered at 1350°C presented best results in terms of microstructural homogeneity and mechanical hardness. Therefore these sintered ceramics were submerged in crude petroleum for 60 days. Ceramics were taken out from the petroleum periodically and subjected to structural, microstructural and mechanical characterizations. Results showed that ceramics submerged in crude petroleum did not suffer any change at any stage of submersion. These characteristics make this material suitable for inert ceramic embedding for sensors used in petroleum extraction.
