The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(R...The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.展开更多
Under the mining influence, carried on the electron microscope, the thin section analysis and creep tests to the fault matter＇s original sample and five groups of duplication samples, which have three kinds of moistu...Under the mining influence, carried on the electron microscope, the thin section analysis and creep tests to the fault matter＇s original sample and five groups of duplication samples, which have three kinds of moisture. The results of those tests indicate that confining pressure effect, structure effect and moisture effect all have influence to fault matter＇s nature. Meanwhile, the distortion destruction and stability variation of fault crush zone are the main reason which causes water-inrush lag-effect. Simultaneously, the stimulation computation we made by the numerical simulation software FLAC 3D also describes the mining influence to floor strata, fault crush zone＇s range and size, the influence of confined water on overburden and the fault zones, also it describes the time effect of bearing influenced by confined water and the rock dank height of confined water along the fault zones influenced by the specific water head.展开更多
Rational rock-explosive matching is of great importance to enhancing explosive energy effective utilization and improving rock fragmentation effect.The traditionally emphasized method of acoustic impedance matching is...Rational rock-explosive matching is of great importance to enhancing explosive energy effective utilization and improving rock fragmentation effect.The traditionally emphasized method of acoustic impedance matching is not rational.Based on blasting breakage mechanism,a new theory of rock-explosive matching in drilling and blasting is proposed.The new approach chooses explosive parameters by reasonable control of the size of crushed zone under the condition of fully fragmentation between adjacent blast holes.This method can directly reflect the blasting fragmentation effect and energy effective utilization,which is easy to implement.Also,a modified model is developed,taken adjacent blast hole blasting loading into account.As a result,explosive parameters of different grades of rock are given in full coupling on-site mixed explosive charge for different project objectives.展开更多
基金supported by the National Key Research and Development Program of China(No.2023YFC2907600)the National Natural Science Foundation of China(Nos.42077267,42277174 and 52074164)+2 种基金the Natural Science Foundation of Shandong Province,China(No.ZR2020JQ23)the Opening Project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology(No.KFJJ21-02Z)the Fundamental Research Funds for the Central Universities,China(No.2022JCCXSB03).
文摘The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.
文摘Under the mining influence, carried on the electron microscope, the thin section analysis and creep tests to the fault matter＇s original sample and five groups of duplication samples, which have three kinds of moisture. The results of those tests indicate that confining pressure effect, structure effect and moisture effect all have influence to fault matter＇s nature. Meanwhile, the distortion destruction and stability variation of fault crush zone are the main reason which causes water-inrush lag-effect. Simultaneously, the stimulation computation we made by the numerical simulation software FLAC 3D also describes the mining influence to floor strata, fault crush zone＇s range and size, the influence of confined water on overburden and the fault zones, also it describes the time effect of bearing influenced by confined water and the rock dank height of confined water along the fault zones influenced by the specific water head.
基金Foundation items： National Science Fund for Distinguished Young Scholars, China （No. 51125037） Natio- nal Basic Research Program of China （No. 2011CB013501） National Natural Science Foundation of China （No. 51279135）
文摘Rational rock-explosive matching is of great importance to enhancing explosive energy effective utilization and improving rock fragmentation effect.The traditionally emphasized method of acoustic impedance matching is not rational.Based on blasting breakage mechanism,a new theory of rock-explosive matching in drilling and blasting is proposed.The new approach chooses explosive parameters by reasonable control of the size of crushed zone under the condition of fully fragmentation between adjacent blast holes.This method can directly reflect the blasting fragmentation effect and energy effective utilization,which is easy to implement.Also,a modified model is developed,taken adjacent blast hole blasting loading into account.As a result,explosive parameters of different grades of rock are given in full coupling on-site mixed explosive charge for different project objectives.
