The influence of Pr6O11 on the microstructure of ZnO varistors was researched. The results of experiment indicate that addition of Pr6O11 leads to the change of the formation process of the spinel phase. A lot of pyro...The influence of Pr6O11 on the microstructure of ZnO varistors was researched. The results of experiment indicate that addition of Pr6O11 leads to the change of the formation process of the spinel phase. A lot of pyrochlore phases （ Bi3Zn2Sb3O14 ） produce at about 700℃, and decompose to fine spinel phase （Zn7Sb2O12） when the temperature reaches to 900℃.This type of spinel phase makes ZnO crystal size minor. Also, the phase contained the Pr and different Pr oxides, which makes the whole material crystal size more uniform and compact. The fine structure improves the threshold voltage by about 60%, and modifies nonlinear coefficient of the ZnO material.展开更多
The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated,and the crystallization characteristics varying with the operation parameter...The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated,and the crystallization characteristics varying with the operation parameters and compositions of the desulfurization slurry were discussed.The results showed that the fine particles generated during the desulfurization process were closely related to the crystal characteristics in the desulfurization slurry by comparison of their morphology and elements. With the higher proportion of fine crystals in the desulfurization slurry,the number concentration of fine particles after desulfurization was increased and their particle sizes were smaller,indicating that the optimization of gypsum crystallization was beneficial for the reduction of the fine particle emission. The lower p H value and an optimal temperature of the desulfurization slurry were beneficial to restrain the generation of fine crystals in the desulfurization slurry. In addition,the higher concentrations of the Fe3＋ions and the F- ions in the desulfurization slurry both promoted the generation of fine crystals with corresponding change of the morphology and the effect of the Fe3＋ ions was more obvious.With the application of the desulfurization synergist additive,it was beneficial for the inhibition of fine crystals while the thinner crystals were generated.展开更多
文摘The influence of Pr6O11 on the microstructure of ZnO varistors was researched. The results of experiment indicate that addition of Pr6O11 leads to the change of the formation process of the spinel phase. A lot of pyrochlore phases （ Bi3Zn2Sb3O14 ） produce at about 700℃, and decompose to fine spinel phase （Zn7Sb2O12） when the temperature reaches to 900℃.This type of spinel phase makes ZnO crystal size minor. Also, the phase contained the Pr and different Pr oxides, which makes the whole material crystal size more uniform and compact. The fine structure improves the threshold voltage by about 60%, and modifies nonlinear coefficient of the ZnO material.
基金supported by the National Natural Science Foundation of China(No.21276049)the National Basic Research Program of China(973 Program)(No.2013CB228505)the Science and Technology Support Program of Jiangsu(No.BE2014856) for their financial support
文摘The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated,and the crystallization characteristics varying with the operation parameters and compositions of the desulfurization slurry were discussed.The results showed that the fine particles generated during the desulfurization process were closely related to the crystal characteristics in the desulfurization slurry by comparison of their morphology and elements. With the higher proportion of fine crystals in the desulfurization slurry,the number concentration of fine particles after desulfurization was increased and their particle sizes were smaller,indicating that the optimization of gypsum crystallization was beneficial for the reduction of the fine particle emission. The lower p H value and an optimal temperature of the desulfurization slurry were beneficial to restrain the generation of fine crystals in the desulfurization slurry. In addition,the higher concentrations of the Fe3＋ions and the F- ions in the desulfurization slurry both promoted the generation of fine crystals with corresponding change of the morphology and the effect of the Fe3＋ ions was more obvious.With the application of the desulfurization synergist additive,it was beneficial for the inhibition of fine crystals while the thinner crystals were generated.
