Analysis of the mechanism of orientations evolution during hot rolling and mechanical properties of TiBw/TA15 composites based on crystal plasticity finite element model

An in-depth understanding of the crystal orientation evolution during hot rolling of TiB whisker(TiBw)/TA15 composites and the anisotropy of the as-rolled plates can help fully utilize the material proper-ties.In this paper,the crystal plasticity finite element models of high-temperature(HT)β-phase and room-temperature(RT)α-phase were constructed from electron backscattering diffraction data.Based on this,the orientation evolution during hot rolling in the single-phase region and the effects of the matrix texture on the mechanical properties of the as-rolled plates were analyzed.The effect of TiBw on the anisotropy was studied by the composites finite element model.Results showed that theα-fiber texture of theβ-phase was formed during HT rolling.This texture was converted to the T-texture of theα-phase at RT during cooling according to the Burgers orientation relationships.The TiBw had little effect on the matrix texture composition.The TiBw and matrix texture caused the matrix to have higher strength along the rolling direction and the transverse direction,respectively.The matrix texture dominated the difference in mechanical properties because its effect exceeded that of TiBw.The effect of the matrix on the mechanical properties was caused by the Schmid factors(SFs)and the critical resolved shear stress(CRSS)of the slip system together.The slip mode was influenced by SFs determined by the angular rela-tionship between the crystal orientation and the loading direction.The CRSS of the activated slip system determined the yield strength.

Texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model

The complex micromechanical response among grains remains a persistent challenge to understand the deformation mechanism of titanium alloys during cold rolling.Therefore,in this work,a multiscale crystal plasticity finite element method of dual-phase alloy was proposed and secondarily developed based on LS-DYNA software.Afterward,the texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy,based on the realistic 3D microstructure,during cold rolling(20%thickness reduction)were systematically investigated.The relative activity of the■slip system in theαphase gradually increased,and then served as the main slip mode at lower Schmid factor(<0.2).In contrast,the contribution of the■slip system to the overall plastic deformation was relatively limited.For theβphase,the relative activity of the<111>{110}slip system showed an upward tendency,indicating the important role of the critical resolved shear stress relationship in the relative activity evolutions.Furthermore,the abnormally high strain of very fewβgrains was found,which was attributed to their severe rotations compelled by the neighboring pre-deformedαgrains.The calculated pole figures,rotation axes,and compelled rotation behavior exhibited good agreement to the experimental results.