期刊文献+
共找到24篇文章
< 1 2 >
每页显示 20 50 100
Response of loose bonding on reflection and transmission of elastic waves at interface between elastic solid and micropolar porous cubic crystal
1
作者 Rajneesh KUMAR Meenakshi PANCHAL 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2010年第5期605-616,共12页
The problem of reflection and transmission of plane periodic waves incident on the interface between the loosely bonded elastic solid and micropolar porous cubic crystal half spaces is investigated. This is done by as... The problem of reflection and transmission of plane periodic waves incident on the interface between the loosely bonded elastic solid and micropolar porous cubic crystal half spaces is investigated. This is done by assuming that the interface behaves like a dislocation, which preserves the continuity of traction while allowing a finite amount of slip. Amplitude ratios of various reflected and transmitted waves have been depicted graphically. Some special cases of interest have been deduced from the present investigation. 展开更多
关键词 MICROPOLAR POROUS cubic crystal reflection coefficients transmission coefficients bonding parameter
下载PDF
CYCLIC DEFORMATION OF FACE CENTERED CUBIC CRYSTALS AND ITS DISLOCATION INTERACTION MODEL——Ⅱ.DISLOCATION INTERACTION MODEL OF CYCLIC DEFORMATION
2
作者 JIN Nengyun Shanghai Jiaotong University Jin Nengyun,Department of Materials Science,Shanghai Jiaotong University,Shanghai 200030,China.Present address:Max-Planck-Institut für Metallforschung,Institut für Physik,7000 Stuttgart 80,FRG 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 1989年第2期93-99,共7页
A dislocation interaction model has been proposed for cyclic deformation of fcc crystals.Ac- cording to this model,cyclic stress-strain responses and saturation dislocation structures of a crystal are associated with ... A dislocation interaction model has been proposed for cyclic deformation of fcc crystals.Ac- cording to this model,cyclic stress-strain responses and saturation dislocation structures of a crystal are associated with the modes and intensities of dislocation interactions between slip systems active in the crystal; and,hence,may be predicted by the location of its tensile axis in the crystallographic triangle.This model has successfully explained the different behaviours of double-slip crystals and multi-slip behaviours of some crystals with orientations usually con- sidered as single-slip ones. 展开更多
关键词 face centered cubic crystal dislocation interaction model multi-slip cyclic deformation
下载PDF
Propagation of plane waves in thermoelastic cubic crystal material with two relaxation times
3
作者 Rajneesh Kumar Manjeet Singh 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2007年第5期627-641,共15页
A problem concerned with the reflection and refraction of thermoelastic plane waves at an imperfect interface between two generalized thermally conducting cubic crystal solid half-spaces of different elastic and therm... A problem concerned with the reflection and refraction of thermoelastic plane waves at an imperfect interface between two generalized thermally conducting cubic crystal solid half-spaces of different elastic and thermal properties with two relaxation times has been investigated. The generalized thermoelastic theory with two relaxation times developed by Green and Lindsay has been used to study the problem. The expressions for the reflection and refraction coefficients which are the ratios of the amplitudes of reflected and refracted waves to the amplitude of incident waves are obtained for an imperfect boundary and deduced for normal stiffness, transverse stiffness, thermal contact conductance, slip and welded boundaries. Amplitude ratios of different reflected and refracted waves for different boundaries with angle of emergence have been compared graphically for different incident waves. It is observed that the amplitude ratios of reflected and refracted waves are affected by the stiffness and thermal properties of the media. 展开更多
关键词 generalized thermoelasticity normal stiffness transverse stiffness thermal contact conductance cubic crystal amplitude ratios
下载PDF
Rayleigh-Type Wave in A Rotated Piezoelectric Crystal Imperfectly Bonded on a Dielectric Substrate
4
作者 Guoquan Nie Menghe Wang 《Computers, Materials & Continua》 SCIE EI 2019年第4期257-274,共18页
Propagation characteristics of Rayleigh-type wave in a piezoelectric layered system are theoretically investigated.The piezoelectric layer is considered as a cubic crystal with finite thickness rotated about Y-axis an... Propagation characteristics of Rayleigh-type wave in a piezoelectric layered system are theoretically investigated.The piezoelectric layer is considered as a cubic crystal with finite thickness rotated about Y-axis and is imperfectly bonded onto a semi-infinite dielectric substrate.The imperfect interface between the two constituents is assumed to be mechanically compliant and dielectrically weakly conducting.The exact dispersion relations for electrically open or shorted boundary conditions are obtained.The numerical results show that the phase velocity of Rayleigh-type wave is symmetric with respect to the cut orientation of 45°and can achieve the maximum propagation speed in this orientation.The mechanical imperfection plays an important role in the dispersion relations,further the normal imperfection can produce a significant reduction of phase velocity comparing with the tangential imperfection.Comparing with the mechanical imperfection the electrical imperfection makes a relatively small reduction of phase velocity of Rayleigh-type wave.The obtained results can provide some fundamentals for understanding of piezoelectric semiconductor and for design and application of piezoelectric surface acoustic wave devices. 展开更多
关键词 Piezoelectric cubic crystal Rayleigh-type wave imperfect interface cut orientation dispersion relation
下载PDF
玻璃晶化法制备氧化物透明陶瓷研究进展 被引量:1
5
作者 周春鸣 陈航 +9 位作者 陈旭 李建强 曹月 李延彬 周天元 邵岑 陈士卫 康健 陈浩 张乐 《人工晶体学报》 CAS 北大核心 2023年第9期1555-1569,共15页
透明陶瓷是一种具有广阔应用前景的无机非金属材料,但以粉末烧结为主的传统制备策略存在依赖高质量原料粉体、需要长时间高温处理、设备和工艺复杂、生产成本高等技术限制。玻璃晶化法是通过调控晶化过程实现玻璃全部结晶并且获得透明... 透明陶瓷是一种具有广阔应用前景的无机非金属材料,但以粉末烧结为主的传统制备策略存在依赖高质量原料粉体、需要长时间高温处理、设备和工艺复杂、生产成本高等技术限制。玻璃晶化法是通过调控晶化过程实现玻璃全部结晶并且获得透明陶瓷的新方法,因其可以克服与传统透明陶瓷加工相关的技术困难,并在合成高致密度、无气孔、非立方相、纳米结构透明陶瓷等方面具有独特的优势,而受到人们的广泛关注。本文首先从玻璃晶化法制备氧化物透明陶瓷的工艺方法和组分体系两方面入手,详细概述了该方法的发展历程和研究现状。接着,指出了目前研究中存在的问题,并对其未来发展前景进行了展望,以期该方法能够广泛应用于制备下一代高性能透明陶瓷材料。 展开更多
关键词 玻璃晶化法 玻璃 氧化物透明陶瓷 非立方相 纳米结构 组分体系
下载PDF
尖晶石型纳米铁酸镍的制备与磁性研究 被引量:5
6
作者 莎木嘎 娜仁图雅 +2 位作者 莫日根图 李金梅 赵智宏 《光谱实验室》 CAS CSCD 北大核心 2009年第4期876-880,共5页
以Fe(NO3)3·9H2O和Ni(NO3)2·6H2O为原料,用柠檬酸为还原剂,采用燃烧法制备了NiFe2O4纳米粉体,用X射线粉末衍射仪(XRD)、透射电子显微镜(TEM)、红外光谱(IR)和振动样品磁强计(VSM)等手段对样品进行了表征,结果表明,样品为立方... 以Fe(NO3)3·9H2O和Ni(NO3)2·6H2O为原料,用柠檬酸为还原剂,采用燃烧法制备了NiFe2O4纳米粉体,用X射线粉末衍射仪(XRD)、透射电子显微镜(TEM)、红外光谱(IR)和振动样品磁强计(VSM)等手段对样品进行了表征,结果表明,样品为立方晶系尖晶石铁酸镍纳米粉体,其粒径在20—40nm之间,具有超顺磁性,并探讨了焙烧温度、焙烧时间对样品磁性的影响。 展开更多
关键词 纳米粉体 燃烧法 尖晶石型 立方晶系 超顺磁性
下载PDF
立方晶系极射赤面投影图的计算机模拟 被引量:3
7
作者 李喜贵 何秉然 +2 位作者 何明鑫 刘海瑞 路庆凤 《河南师范大学学报(自然科学版)》 CAS CSCD 北大核心 2009年第3期57-59,共3页
论述了绘制立方晶系极射赤面投影的原理和方法,在分析立方晶系(001)面投影图的基础上,采用Matlab作为编程语言,使用旋转矩阵,实现了立方晶系任意晶面的极射赤面投影图的程序化绘制,所绘投影图与实验室手绘标准图一致.
关键词 立方晶系 标准极射赤面投影 旋转矩阵 计算机模拟
下载PDF
燃烧法制备纳米铁酸锌和铁酸镍及表征 被引量:1
8
作者 莎木嘎 敖特根 +4 位作者 娜仁图雅 阿木古楞 赵智宏 李金梅 娜赫娅 《内蒙古农业大学学报(自然科学版)》 CAS 北大核心 2009年第1期274-277,共4页
本文以Fe(NO3)3.9H2O,Zn(NO3)2.6H2O和N i(NO3)2.6H2O为原料,以柠檬酸为还原剂,采用燃烧法制备了ZnFe2O4和N i Fe2O4纳米粉体,采用X-射线粉末衍射仪(XRD)、高分辨率透射电子显微镜(TEM)、红外光谱(IR)和振动样品磁强计(VSM)等手段对样... 本文以Fe(NO3)3.9H2O,Zn(NO3)2.6H2O和N i(NO3)2.6H2O为原料,以柠檬酸为还原剂,采用燃烧法制备了ZnFe2O4和N i Fe2O4纳米粉体,采用X-射线粉末衍射仪(XRD)、高分辨率透射电子显微镜(TEM)、红外光谱(IR)和振动样品磁强计(VSM)等手段对样品进行了表征,结果表明样品为尖晶石型铁酸锌纳米粉体和立方晶系的铁酸镍纳米粉体,其平均粒径约为22nm和32nm,并具有超顺磁性。 展开更多
关键词 纳米粉体 燃烧法 尖晶石型 立方晶系 超顺磁性
下载PDF
立方液晶作为药物载体的研究 被引量:4
9
作者 刘少杰 王连成 +3 位作者 张晋 赵学艳 沈强 郑利强 《山东大学学报(理学版)》 CAS CSCD 北大核心 2005年第3期95-100,共6页
甘油单油酸酯(MO)嵌段共聚物((PEO)99(PPO)67(PEO)99,F127)水立方液晶体系在水中分散可形成立方液晶颗粒分散体系,该分散体系可作为药物缓释的载体.利用原子力显微镜(AFM)和动态激光光散射法测试了立方液晶颗粒的尺寸,分别用紫外分光光... 甘油单油酸酯(MO)嵌段共聚物((PEO)99(PPO)67(PEO)99,F127)水立方液晶体系在水中分散可形成立方液晶颗粒分散体系,该分散体系可作为药物缓释的载体.利用原子力显微镜(AFM)和动态激光光散射法测试了立方液晶颗粒的尺寸,分别用紫外分光光度法和高压液相色谱仪测定了甘油单十四烷酸酯(MM)、甘油单十六烷酸酯(MP)、F127以及不同溶剂对立方液晶颗粒包结阿司匹林或咖啡因缓释效率的影响.结果表明:分散体系中加入MP后,可提高阿司匹林的释放效率;而MM的加入则降低药物的释放效率.F127的质量分数达到一定值时,对药物缓释效率有显著的促进作用.制备前体时,使用不同的溶剂,包结药物的释放效率也有所不同. 展开更多
关键词 立方液晶 立方液晶颗粒 药物载体 药物缓释效率
下载PDF
晶面标准极射赤面投影图的讨论 被引量:3
10
作者 朱杰武 《吉林化工学院学报》 CAS 2002年第2期64-66,共3页
以往工作对晶面极射赤面投影原理及投影图阐述甚简[1,2 ] .本文在讨论的基础上 ,运用已知的晶面晶向间夹角[3 ] ,和晶面指数相关规律 。
关键词 晶面标准极射赤面投影图 晶面指数相关规律 立方晶系 投影图 绘制 凝聚态物理学
下载PDF
立方晶系(001)面极射赤道平面投影图的计算机实现 被引量:4
11
作者 李艺星 杨祖轩 《华北水利水电学院学报》 2006年第4期58-60,共3页
在以晶体为主的材料加工过程中,极射赤道平面投影图是非常重要的辅助工具.为了改变手工绘制极图的现状,分析了极图的数学过程,提出了用计算机绘制立方晶系(001)面极图的理论和方法,并获得了用计算机绘制的准确的极图,此工作具有一定创新性.
关键词 立方晶系 (001)面 极射赤道平面投影图
下载PDF
最小二乘法在精确测定非立方晶系中的应用 被引量:1
12
作者 胡正西 《广西科学院学报》 2004年第1期20-21,25,共3页
利用最小二乘法消除误差 ,导出正交晶系的法式方程 ,由此推导出非立方晶系的基本形式 ,并以六方晶系为例 ,给出方程组的求解过程 .
关键词 最小二乘法 精确测定 非立方晶系 点阵常数 法式方程 晶体材料
下载PDF
钙钛矿型复合氧化物LaNi_(1-x)Mn_xO_3晶体结构与催化性能的关系
13
作者 杜少斌 郑洪元 +2 位作者 马福泰 王瑾 杨薇 《杭州大学学报(自然科学版)》 CSCD 1991年第3期303-310,共8页
用XRD、IR和TPR等技术研究了钙钛矿型复合氧化物的晶体结构及其反应性能.整个组成范围内,LaNi_(i-x)Mn_xO_3(0.0≤x≤1.0)体系都生成单一钙钛矿相;x=0.0,0.6≤X≤1.0时为菱形晶系,0.2≤x≤0.5为立方晶系.IR和TPR研究表明,晶体结构对B—... 用XRD、IR和TPR等技术研究了钙钛矿型复合氧化物的晶体结构及其反应性能.整个组成范围内,LaNi_(i-x)Mn_xO_3(0.0≤x≤1.0)体系都生成单一钙钛矿相;x=0.0,0.6≤X≤1.0时为菱形晶系,0.2≤x≤0.5为立方晶系.IR和TPR研究表明,晶体结构对B—O键合作用存在较大影响.CO微反考察表明,本体系的催化活性与晶系存在密切关系,晶体对称性越高,反应活性越低.说明钙钛矿型复合氧化物的催化活性与体系活性中心的B—O键合作用能力有关. 展开更多
关键词 钙钛矿型 复合氧化物 催化性能
下载PDF
立方晶系单晶材料晶体取向对纵波声速的影响 被引量:5
14
作者 赵洪波 郭广平 邬冠华 《失效分析与预防》 2010年第2期65-69,共5页
单晶材料声速各向异性的特点使传统超声测量在对其厚度测量时存在一定误差。从理论上推导立方晶系单晶材料{100}晶面内的声速模型,设计加工立方晶系单晶材料的声速测量试块,测量超声入射角与晶体不同取向下纵波声速大小,求得该材料的实... 单晶材料声速各向异性的特点使传统超声测量在对其厚度测量时存在一定误差。从理论上推导立方晶系单晶材料{100}晶面内的声速模型,设计加工立方晶系单晶材料的声速测量试块,测量超声入射角与晶体不同取向下纵波声速大小,求得该材料的实际声速模型。从模型中发现该材料不同晶体取向下纵波声速在5300~6130m/s内变化,变化幅度约15.6%。该模型为立方晶系单晶叶片的壁厚误差修正提供了可靠的数据支持。 展开更多
关键词 单晶材料 各向异性 立方晶系 声速模型 超声测厚
下载PDF
立方晶系晶体晶面位向的蚀坑判定法 被引量:4
15
作者 李华 郭雯 《金属功能材料》 CAS 1997年第2期82-86,共5页
介绍一种通过蚀坑金相法来判定立方晶系晶体晶面位向的方法,主要涉及蚀坑的几何图形,几何图形的由来。
关键词 立方晶体 蚀坑 晶面位向 浸蚀 X射线衍射
下载PDF
Growth and Optical Spectra of Tb^(3+)/Eu^(3+) Co-doped Cubic NaYF_4 Single Crystal for White Light Emitting Diode 被引量:2
16
作者 Yongzhang Jiang Haiping Xia +3 位作者 Jiazhong Zhang Shuo Yang Haochuan Jiang Baojiu Chen 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2015年第12期1232-1236,共5页
High quality Tb^3+/Eu^3+ co-doped cubic NaYF 4 single crystal in the size of Φ1.0 cm×6.6 cm was grown by a modified Bridgman method using KF as assistant flux for NaF-YF 3 system under the condition of complet... High quality Tb^3+/Eu^3+ co-doped cubic NaYF 4 single crystal in the size of Φ1.0 cm×6.6 cm was grown by a modified Bridgman method using KF as assistant flux for NaF-YF 3 system under the condition of completely closed Pt crucible.A white light emission from the combination of the violet-blue,blue,green,orange,and red lights with chromaticity coordinates of x = 0.3107,y = 0.3274,correlated color temperature of T c = 6637 K,color rendering index of R a = 83,and color quality scale of Q a = 82 could be obtained from 1.51 mol%Tb^3+ and 1.42 mol%Eu^3+ co-doped cubic NaYF 4 single crystal when being excited by a 369 nm light.This indicates that Tb^3+/Eu^3+)co-doped cubic NaYF 4 single crystal has a potential application in white light emitting diode excited by ultraviolet light. 展开更多
关键词 cubic NaYF 4 single crystal KF flux Tb^3+/Eu^3+ ions White light emission
原文传递
面心和体心立方晶体中映像规则判断始滑移系的原理
17
作者 杨晓冬 杨静 《华侨大学学报(自然科学版)》 CAS 北大核心 2020年第4期478-483,共6页
提出一种易于理解且严谨的论述,从原理上解释面心和体心立方晶体中快速判断始滑移系的映像规则.首先,将Schmid因子转化成关于夹角φ+λ和φ-λ的余弦函数.该余弦函数在标准投影图上可描述为“力轴靠近滑移系平面”的程度和“夹角φ和λ... 提出一种易于理解且严谨的论述,从原理上解释面心和体心立方晶体中快速判断始滑移系的映像规则.首先,将Schmid因子转化成关于夹角φ+λ和φ-λ的余弦函数.该余弦函数在标准投影图上可描述为“力轴靠近滑移系平面”的程度和“夹角φ和λ接近”的程度,以此为判据可快速地比较Schmid因子的相对大小.然后,以数学运算证明映像规则的科学性. 展开更多
关键词 映像规则 Diehl规则 滑移系 Schmid定律 立方晶体
下载PDF
立方晶系孪晶的电子衍射花样特征
18
作者 张栩瑞 陈亮维 +3 位作者 叶成 鲍瑞 虞澜 刘斌 《昆明理工大学学报(自然科学版)》 北大核心 2023年第6期25-29,共5页
孪晶的表征方法有透射电子衍射以及电子背散衍射(Electron Backscattered Diffraction,EBSD),目前极少有一个衍射花样标准供参照.本文建立了面心立方(Face-Centered Cubic,FCC)和体心立方(Body-Centered Cubic,BCC)孪晶与TEM衍射花样以... 孪晶的表征方法有透射电子衍射以及电子背散衍射(Electron Backscattered Diffraction,EBSD),目前极少有一个衍射花样标准供参照.本文建立了面心立方(Face-Centered Cubic,FCC)和体心立方(Body-Centered Cubic,BCC)孪晶与TEM衍射花样以及EBSD花样之间的数理关系,给出了它们的计算衍射花样,为孪晶结构表征提供了依据. 展开更多
关键词 透射电子衍射 背散电子衍射 孪晶 立方晶系
原文传递
Effect of rare earth(Nd^(3+))metal doping on structural,morphological,optical and magnetic traits of Zn-Mg nano-ferrites
19
作者 Rohit Jasrotia Nisha Kumari +10 位作者 Ritesh Verma Suman Sachin Kumar Godara Jahangeer Ahmed Saad M.Alshehri Bidhan Pandit Sanjay Kumar Himanshi Shubham Sharma Kirti Pradip K.Maji 《Journal of Rare Earths》 SCIE EI CAS CSCD 2023年第11期1763-1770,I0004,共9页
Herein,we report the synthesis of Zn_(0.7)Mg_(0.3)Nd_(x)Fe_(2-x)O_(4)(where,x=0,0,0,01,0,02)ferrite nanoparticles by employing the sol-gel auto-combustion technique.The X-ray diffraction(XRD)pattern suggests the forma... Herein,we report the synthesis of Zn_(0.7)Mg_(0.3)Nd_(x)Fe_(2-x)O_(4)(where,x=0,0,0,01,0,02)ferrite nanoparticles by employing the sol-gel auto-combustion technique.The X-ray diffraction(XRD)pattern suggests the formation of a pure cubic structure,without any impurity phase,with an Fd3m space group at room temperature.With increasing doping amount,the crystallite size is reported as 35-41 nm,while the lattice parameters rise from 0.8381 to 0.8395 nm.Field emission scanning electron microscopy(FESEM)images show the formation of spherical grains with agglomerated morphology in all the samples,with grain sizes ranging from 49 to 103 nm.Energy dispersive X-ray spectroscopy(EDX)and elemental mapping investigation confirm the chemical purity of all the samples.Fourier transform infrared(FTIR)analysis shows the presence of two prominent peaks around 440 and 560 cm^(-1)that correspond to the octahedral and tetrahedral positions.In addition,the existence of five Raman active vibratio nal modes in all produced specimens again confirms the structural purity of all the samples.The M-H curve shows that saturation magnetization(M_(s))first increases from 14.98 to 28.22 emu/g and then decreases to 18.98emu/g with increasing doping amount.This is due to the A-B type super-exchange interaction for the synthesized samples.The variation in coercivity(H_(c))and magnetic anisotropy(K_(1))suggest the thermal stability of all the samples and can be utilized in transformers and solenoids. 展开更多
关键词 Magnetic nanoparticles Saturation magnetization Sol-gel auto-combustion synthesis Super-exchange interaction cubic crystal structure Rare earths
原文传递
溶致液晶作为药物载体的研究进展 被引量:15
20
作者 陈玉林 桂双英 钱珊珊 《中国新药杂志》 CAS CSCD 北大核心 2013年第6期654-659,共6页
综述了溶致液晶的形成、结构特点、制备及表征,重点对反相双连续立方液晶和反相六角相液晶在药物载体领域中的应用做了归纳总结,分析其作为药物载体的优势、前景及存在的问题,为进一步研究溶致液晶载药系统提供参考。
关键词 溶致液晶 立方液晶 六角相液晶 药物载体
原文传递
上一页 1 2 下一页 到第
使用帮助 返回顶部