An Artificial Intelligence‑Assisted Flexible and Wearable Mechanoluminescent Strain Sensor System

The complex wiring,bulky data collection devices,and difficulty in fast and on-site data interpretation significantly limit the practical application of flexible strain sensors as wearable devices.To tackle these challenges,this work develops an artificial intelligenceassisted,wireless,flexible,and wearable mechanoluminescent strain sensor system(AIFWMLS)by integration of deep learning neural network-based color data processing system(CDPS)with a sandwich-structured flexible mechanoluminescent sensor(SFLC)film.The SFLC film shows remarkable and robust mechanoluminescent performance with a simple structure for easy fabrication.The CDPS system can rapidly and accurately extract and interpret the color of the SFLC film to strain values with auto-correction of errors caused by the varying color temperature,which significantly improves the accuracy of the predicted strain.A smart glove mechanoluminescent sensor system demonstrates the great potential of the AIFWMLS system in human gesture recognition.Moreover,the versatile SFLC film can also serve as a encryption device.The integration of deep learning neural network-based artificial intelligence and SFLC film provides a promising strategy to break the“color to strain value”bottleneck that hinders the practical application of flexible colorimetric strain sensors,which could promote the development of wearable and flexible strain sensors from laboratory research to consumer markets.

Bioinspired Ultrasensitive Flexible Strain Sensors for Real‑Time Wireless Detection of Liquid Leakage

Liquid leakage of pipeline networks not only results in considerableresource wastage but also leads to environmental pollution and ecological imbalance.In response to this global issue, a bioinspired superhydrophobic thermoplastic polyurethane/carbon nanotubes/graphene nanosheets flexible strain sensor (TCGS) hasbeen developed using a combination of micro-extrusion compression molding andsurface modification for real-time wireless detection of liquid leakage. The TCGSutilizes the synergistic effects of Archimedean spiral crack arrays and micropores,which are inspired by the remarkable sensory capabilities of scorpions. This designachieves a sensitivity of 218.13 at a strain of 2%, which is an increase of 4300%. Additionally, it demonstrates exceptional durability bywithstanding over 5000 usage cycles. The robust superhydrophobicity of the TCGS significantly enhances sensitivity and stability indetecting small-scale liquid leakage, enabling precise monitoring of liquid leakage across a wide range of sizes, velocities, and compositionswhile issuing prompt alerts. This provides critical early warnings for both industrial pipelines and potential liquid leakage scenariosin everyday life. The development and utilization of bioinspired ultrasensitive flexible strain sensors offer an innovative and effectivesolution for the early wireless detection of liquid leakage.

Flexible Strain Sensors with Ultra‑High Sensitivity and Wide Range Enabled by Crack‑Modulated Electrical Pathways

This study presents a breakthrough in flexible strain sensor technology with the development of an ultrahigh sensitivity and wide-range sensor,addressing the critical challenge of reconciling sensitivity with measurement range.Inspired by the structure of bamboo slips,we introduce a novel approach that utilises liquid metal to modulate the electrical pathways within a cracked platinum fabric electrode.The resulting sensor demonstrates a gauge factor greater than 108 and a strain measurement capability exceeding 100%.The integration of patterned liquid metal enables customisable tuning of the sensor’s response,while the porous fabric structure ensures superior comfort and air permeability for the wearer.Our design not only optimises the sensor’s performance but also enhances the electrical stability that is essential for practical applications.Through systematic investigation,we reveal the intrinsic mechanisms governing the sensor’s response,offering valuable insights for the design of wearable strain sensors.The sensor’s exceptional performance across a spectrum of applications,from micro-strain to large-strain detection,highlights its potential for a wide range of real-world uses,demonstrating a significant advancement in the field of flexible electronics.

Polyethylene glycol fusion repair of severed sciatic nerves accelerates recovery of nociceptive sensory perceptions in male and female rats of different strains

Successful polyethylene glycol fusion(PEG-fusion)of severed axons following peripheral nerve injuries for PEG-fused axons has been reported to:(1)rapidly restore electrophysiological continuity;(2)prevent distal Wallerian Degeneration and maintain their myelin sheaths;(3)promote primarily motor,voluntary behavioral recoveries as assessed by the Sciatic Functional Index;and,(4)rapidly produce correct and incorrect connections in many possible combinations that produce rapid and extensive recovery of functional peripheral nervous system/central nervous system connections and reflex(e.g.,toe twitch)or voluntary behaviors.The preceding companion paper describes sensory terminal field reo rganization following PEG-fusion repair of sciatic nerve transections or ablations;howeve r,sensory behavioral recovery has not been explicitly explored following PEG-fusion repair.In the current study,we confirmed the success of PEG-fusion surgeries according to criteria(1-3)above and more extensively investigated whether PEG-fusion enhanced mechanical nociceptive recovery following sciatic transection in male and female outbred Sprague-Dawley and inbred Lewis rats.Mechanical nociceptive responses were assessed by measuring withdrawal thresholds using von Frey filaments on the dorsal and midplantar regions of the hindpaws.Dorsal von Frey filament tests were a more reliable method than plantar von Frey filament tests to assess mechanical nociceptive sensitivity following sciatic nerve transections.Baseline withdrawal thresholds of the sciatic-mediated lateral dorsal region differed significantly across strain but not sex.Withdrawal thresholds did not change significantly from baseline in chronic Unoperated and Sham-operated rats.Following sciatic transection,all rats exhibited severe hyposensitivity to stimuli at the lateral dorsal region of the hindpaw ipsilateral to the injury.However,PEG-fused rats exhibited significantly earlier return to baseline withdrawal thresholds than Negative Control rats.Furthermore,PEG-fused rats with significantly improved Sciatic Functional Index scores at or after 4 weeks postoperatively exhibited yet-earlier von Frey filament recove ry compared with those without Sciatic Functional Index recovery,suggesting a correlation between successful PEG-fusion and both motor-dominant and sensory-dominant behavioral recoveries.This correlation was independent of the sex or strain of the rat.Furthermore,our data showed that the acceleration of von Frey filament sensory recovery to baseline was solely due to the PEG-fused sciatic nerve and not saphenous nerve collateral outgrowths.No chronic hypersensitivity developed in any rat up to 12 weeks.All these data suggest that PEG-fusion repair of transection peripheral nerve injuries co uld have important clinical benefits.

Yield and Quality of Forage Oat (<i>Avena sativa</i>L.) Cultivars as Affected by Seed Inoculation with Nitrogenous Strains

Nitrogen availability can be enhanced with the application of nitrogen fixing bacteria and it may be helpful in increasing forage yield and improving quality of oat. Therefore, a field trial to evaluate the effect of seed inoculation with nitrogen fixing bacteria on forage yield and quality of oat was carried out at Agronomic Research Area, University of Agriculture, Faisalabad during Rabi season 2013-14. The experiment was laid out in Randomized Complete Block Design (RCBD) with factorial arrangements using three replications. The experiment was comprised of two integrated approaches. The first approach was oat cultivars consisting of four treatments, V1 (AVON), V2 (S-2000), V3 (S-2011) and V4 (PD2LV65) and the second approach was seed inoculation consisting of three treatments, S0 (control), S1 (Azotobacter spp.), S2 (Azospirillum spp.). Fisher’s analysis of variance technique was used for statistically interpretation of data by using least significant difference (LSD) test at 5% level of probability. Nitrogen fixing bacteria significantly affect the germination count (m2), plant height (cm), number of tillers (m2), number of leaves per tiller, leaf area per tiller (cm2), green forage yield (t·ha-1) and dry matter yield (t ha-1). The maximum green forage yield (85.2 t·ha-1), dry matter yield (14.1 t ·ha-1) and crude protein (11.5%) were recorded where Azotobacter inoculation was applied. The interaction between cultivars and nitrogenous strains was significant for green forage yield (t·ha-1), dry matter yield (t·ha-1) and crude protein (%). Conclusion showed that cultivar Sargodha-2011 which was inoculated with Azotobacter spp. gave higher forage yield of good quality.

Cell Wall Fixation,Translocation,and Vacuolar Detoxification of Cadmium Contribute to Differential Grain Cadmium Accumulation in Two Rice Cultivars

Cadmium(Cd)toxicity in rice is a major concern for human health and the environment,as it can accumulate in rice grains when grown in Cd-contaminated soils.To mitigate the risk of Cd toxicity,it is crucial to cultivate rice varieties with low grain Cd accumulation.In the summers of 2021 and 2022,we conducted Cd analysis on two rice cultivars,Tianyouhuazhan(TYHZ)and Xiushui 14,grown in fields with varying Cd pollution levels.These cultivars were also subjected to hydroponic treatment with or without 1μmol/L Cd for 7 d to assess Cd accumulation,nitric oxide(NO)production。

Present-day Upper-crustal Strain Rate Field in Southeastern Tibet and its Geodynamic Implications:Constraints from GPS Measurements with ABIC Method

The Earth’s surface kinematics and deformation are fundamental to understanding crustal evolution.An effective research approach is to estimate regional motion field and deformation fields based on modern geodetic networks.If the discrete observed velocity field is obtained,the velocity related fields,such as dilatation rate and maximum shear strain rate,can be estimated by applying varied mathematical approaches.This study applied Akaike's Bayesian Information Criterion(ABIC)method to calculate strain rate fields constrained by GPS observations in the southeast Tibetan Plateau.Comparison with results derived from other three methods revealed that our ABIC-derived strain rate fields were more precise.The maximum shear strain rate highlighted the Xianshuihe–Xiaojiang fault system as the main boundary for the outward migration of material in southeastern Tibet,indicating rotation of eastern Tibet material around the eastern Himalaya rather than whole extrusion along a fixed channel.Additionally,distinct dilatation rate patterns in the northeast and southwest regions of the fault system were observed.The northeast region,represented by the Longmenshan area,exhibited negative dilatational anomalies;while the southwest region,represented by the Jinsha River area north of 29°N,displayed positive dilatational anomalies.This indicates compression in the former and extension in the latter.Combined with deep geophysical observations,we believe that the upper and lower crusts of the Jinsha River area north of 29°N are in an entire expanding state,probably caused by the escape-drag effect of material.The presence of a large,low-viscosity region south of 29°N may not enable the entire escape of the crust,but instead result in a differential escape of the lower crust faster than the upper crust.

Pyridinic-N doping carbon layers coupled with tensile strain of FeNi alloy for activating water and urea oxidation

Exploitation of oxygen evolution reaction(OER)and urea oxidation reaction(UOR)catalysts with high activity and stability at large current density is a major challenge for energy-saving H_(2) production in water electrolysis.Herein,we use the pyridinic-N doping carbon layers coupled with tensile strain of FeNi alloy activated by NiFe_(2)O_(4)(FeNi/NiFe_(2)O_(4)@NC)for efficiently increasing the performance of water and urea oxidation.Due to the tensile strain effect on FeNi/NiFe_(2)O_(4)@NC,it provides a favorable modulation on the electronic properties of the active center,thus enabling amazing OER(η_(100)=196 mV)and UOR(E_(10)=1.32 V)intrinsic activity.Besides,the carbon-coated layers can be used as armor to prevent FeNi alloy from being corroded by the electrolyte for enhancing the OER/UOR stability at large current density,showing high industrial practicability.This work thus provides a simple way to prepare high-efficiency catalyst for activating water and urea oxidation.

The role of strain in oxygen evolution reaction

The oxygen evolution reaction(OER)is a crucial step in metal-air batteries and water splitting technologies,playing a significant role in the efficiency and achievable heights of these two technologies.However,the OER is a four-step,four-electron reaction,and its slow kinetics result in high overpotentials,posing a challenge.To address this issue,numerous strategies involving modified catalysts have been proposed and proven to be highly efficient.In these strategies,the introduction of strain has been widely reported because it is generally believed to effectively regulate the electronic structure of metal sites and alter the adsorption energy of catalyst surfaces with reaction intermediates.However,strain has many other effects that are not well known,making it an important yet unexplored area.Based on this,this review provides a detailed introduction to the various roles of strain in OER.To better explain these roles,the review also presents the definition of strain and elucidates the potential mechanisms of strain in OER based on the d-band center theory and adsorption volcano plot.Additionally,the review showcases various ways of introducing strain in OER through examples reported in the latest literature,aiming to provide a comprehensive perspective for the development of strain engineering.Finally,the review analyzes the appropriate proportion of strain introduction,compares compressive and tensile strain,and examines the impact of strain on stability.And the review offers prospects for future research directions in this emerging field.

Yield and Nutritive Values of Semi- and Non-Fall Dormant Alfalfa Cultivars under Late-Cutting Schedule in California’s Central Valley

California is one of the major alfalfa (Medicago sativa L) forage-producing states in the U.S, but its production area has decreased significantly in the last couple of decades. Selection of cultivars with high yield and nutritive value under late-cutting schedule strategy may help identify cultivars that growers can use to maximize yield while maintaining area for sustainable alfalfa production, but there is little information on this strategy. A field study was conducted to determine cumulative dry matter (DM) and nutritive values of 20 semi- and non-fall dormant (FD) ratings (FD 7 and FD 8 - 10, respectively) cultivars under 35-day cut in California’s Central Valley in 2020-2022. Seasonal cumulative DM yields ranged from 6.8 in 2020 to 37.0 Mg·ha−1 in 2021. Four FD 8 - 9 cultivars were the highest yielding with 3-yrs avg. DM greater than the lowest yielding lines by 46%. FD 7 cultivar “715RR” produced the highest crude protein (CP: 240 g·Kg−1) while FD 8 cultivar “HVX840RR” resulted in the highest neutral detergent fiber digestibility (NDFD: 484 g·Kg−1, 7% greater than the top yielding cultivars) but with DM yield intermediate. Yields and NDFD correlated positively but weakly indicating some semi- and non-FD cultivars performing similarly. These results suggest that selecting high yielding cultivars under 35-day cutting schedule strategy can be used as a tool to help growers to maximize yield while achieving good quality forages for sustainable alfalfa production in California’s Central Valley.

Mechanical behavior of nanorubber reinforced epoxy over a wide strain rate loading

Nanorubber/epoxy composites containing 0,2,6 and 10 wt%nanorubber are subjected to uniaxial compression over a wide range of strain rate from 8×10^(-4) s^(-1) to~2×10^(4) s^(-1).Unexpectedly,their strain rate sensitivity and strain hardening index increase with increasing nanorubber content.Potential mechanisms are proposed based on numerical simulations using a unit cell model.An increase in the strain rate sensitivity with increasing nanorubber content results from the fact that the nanorubber becomes less incompressible at high strain,generating a higher hydro-static pressure.Adiabatic shear localization starts to occur in the epoxy under a strain rate of 22,000 s^(-1) when the strain exceeds 0.35.The presence of nanorubber in the epoxy reduces adiabatic shear localization by preventing it from propagating.

Effect of rice cultivar on greenhouse-gas emissions from rice-fish co-culture

In aquaculture,co-culturing rice with fish may mitigate greenhouse-gas emissions.In this study,co-culture of four rice cultivars in a laboratory-scale rice–fish system reduced CH_(4)and N_(2)O emissions relative to fish monoculture.Differences in CH_(4)and N_(2)O emissions among rice cultivars primarily stem from the differential effects of rice plants on plant-mediated CH_(4)transport,CH_(4)oxidation and nitrogen absorption.

Increasing root-lower characteristics improves drought tolerance in cotton cultivars at the seedling stage

Drought is an important abiotic stress factor in cotton production.The root system architecture(RSA)of cotton shows high plasticity which can alleviate drought-related stress under drought stress(DS)conditions;however,this alleviation is cultivar dependent.Therefore,this study estimated the genetic variability of RSA in cotton under DS.Using the paper-based growth system,we assessed the RSA variability in 80 cotton cultivars at the seedling stage,with 0 and10%polyethylene glycol 6000(PEG6000)as the control(CK)and DS treatment,respectively.An analysis of 23 aboveground and root traits in the 80 cotton cultivars revealed different responses to DS.On the 10th day after DS treatment,the degree of variation in the RSA traits under DS(5–55%)was greater than that of CK(5–49%).The 80 cultivars were divided into drought-tolerant cultivars(group 1),intermediate drought-tolerant cultivars(group 2),and drought-sensitive cultivars(group 3)based on their comprehensive evaluation values of drought resistance.Under DS,the root lengthlower,root area-lower,root volume-lower,and root length density-lower were significantly reduced by 63,71,76,and 4%in the drought-sensitive cultivars compared to CK.Notably,the drought-tolerant cultivars maintained their root lengthlower,root area-lower,root volume-lower,and root length density–lower attributes.Compared to CK,the root diameter(0–2 mm)-lower increased by 21%in group 1 but decreased by 3 and 64%in groups 2 and 3,respectively,under DS.Additionally,the drought-tolerant cultivars displayed a plastic response under DS that was characterized by an increase in the root-lower characteristics.Drought resistance was positively correlated with the root area-lower and root length density-lower.Overall,the RSA of the different cotton cultivars varied greatly under DS.Therefore,important root traits,such as the root-lower traits,provide great insights for exploring whether drought-tolerant cotton cultivars can effectively withstand adverse environments.

Automated and integrated ultrahigh throughput screening for industrial strain enabled by acoustic-droplet-ejection mass spectrometry

Synthetic biology provides unprecedented opportunities to tackle critical issues including climate change and sustainable development by constructing microbial cell factories to produce industrially valuable biochemicals,biofuels,and biomaterials using renewable biomass resources[1],where strain screening for specific metabolic traits is a critical step.Rapid,accurate,and simultaneous quantification of multiple metabolites is critical for multi-perspective strain performance evaluation and strain screening,and a generalized method or platform will also reduce method development time to speed up the screening process.

Screening of Myocardial Cardiotoxicity Induced by Anticancer Chemotherapy and the Importance of Global Longitudinal Strain

Introduction: The improvement of survival in patients with cancer and the expansion of therapeutic options have led to the emergence of a new profile of cardiotoxicity, specifically associated with antimitotic agents. Our study aimed to assess the incidence of chemotherapy-induced myocardial toxicity in patients with cancer. Patients and Methods: We conducted a looking-forward longitudinal cohort study including all patients admitted to the Cardiology departments of Aristide le Dantec Hospital and Dalal Jamm National Hospital Centre for apre-chemotherapy check-up. The included patients did not undergo any pre-existing cardiopathy. Results: Over a period of two years ranging from January 2019 to December 2021, a total of 37 patients were included in the study. Notably, there was a female predominance (92%) with an average age of 49.7 years ± 13.69. Breast cancer accounted for 70% of the neoplasms. Laboratory findings revealed moderate anemia in 19 patients (51%). At inclusion, the left ventricle (LV) was of normal size (LV diastole at 44.46 ± 4.97 mm). The systolic function of the left ventricle was normal in all patients, with an average ejection fraction (EF) of 63.1% ± 5.80 and a mean global longitudinal strain (GLS) of −20.4% ± 2.58. The most commonly used agents were anthracyclines. During follow-up, 3 patients (8.1%) developed clinical symptoms of left heart failure, and LV dysfunction on echocardiography was observed in 5 (13.5%) patients, with a significant decrease in EF Conclusion: The incidence of cardiac toxicity is not negligible, hence the importance of early screening. Strain imaging is an essential tool that should be performed as part of the assessment before chemotherapy and re-evaluated during treatment.

A telomere-to-telomere genome assembly of Hongyingzi,a sorghum cultivar used for Chinese Baijiu production

Sorghum(Sorghum bicolor(L.)Moench)is a world cereal crop used in China for producing Baijiu,a distilled spirit.We report a telomere-to-telomere genome assembly of the Baijiu cultivar Hongyingzi,HYZ-T2T,using ultralong reads.The 10 chromosome pairs contained 33,462 genes,of which 93%were functionally annotated.The 20 telomeres and 10 centromeric regions on the HYZ-T2T chromosomes were predicted and two consecutive large inversions on chromosome 2 were characterized.A 65-gene reconstruction of the metabolic pathway of tannins,the flavor substances in Baijiu,was performed and may advance the breeding of sorghum cultivars for Baijiu production.

In-Situ Atomic-Scale Observation of Brownmillerite to Ruddlesden-Popper Phase Transition Tuned by Epitaxial Strain in Cobaltites

Phase transitions involving oxygen ion extraction within the framework of the crystallographic relevance have been widely exploited for sake of superconductivity,ferromagnetism,and ion conductivity in perovskiterelated oxides.However,atomic-scale pathways of phase transitions and ion extraction threshold are inadequately understood.Here we investigate the atomic structure evolution of LaCoO_(3) films upon oxygen extraction and subsequent Co migration,focusing on the key role of epitaxial strain.The brownmillerite to Ruddlesden-Popper phase transitions are discovered to stabilize at distinct crystal orientations in compressive-and tensile-strained cobaltites,which could be attributed to in-plane and out-of-plane Ruddlesden-Popper stacking faults,respectively.A two-stage process from exterior to interior phase transition is evidenced in compressive-strained LaCoO_(2.5),while a single-step nucleation process leaving bottom layer unchanged in tensile-strained situation.Strain analyses reveal that the former process is initiated by an expansion in Co layer at boundary,whereas the latter one is associated with an edge dislocation combined with antiphase boundary.These findings provide a chemomechanical perspective on the structure regulation of perovskite oxides and enrich insights into strain-dependent phase diagram in epitaxial oxides films.

Towards cultivar-oriented gene discovery for better crops

The continued expansion of the world population,increasingly inconsistent climate and shrinking agricultural resources present major challenges to crop breeding.Fortunately,the increasing ability to discover and manipulate genes creates new opportunities to develop more productive and resilient cultivars.Many genes have been described in papers as being beneficial for yield increase.However,few of them have been translated into increased yield on farms.In contrast,commercial breeders are facing gene decidophobia,i.e.,puzzled about which gene to choose for breeding among the many identified,a huge chasm between gene discovery and cultivar innovation.The purpose of this paper is to draw attention to the shortfalls in current gene discovery research and to emphasise the need to align with cultivar innovation.The methodology dictates that genetic studies not only focus on gene discovery but also pay good attention to the genetic backgrounds,experimental validation in relevant environments,appropriate crop management,and data reusability.The close of the gaps should accelerate the application of molecular study in breeding and contribute to future global food security.

Frequency-dependent Electrical Capacitance and Resistance of Ultra-high Performance Concrete and Their Responses to Compressive Strain

The frequency-dependent electrical properties and strain self-sensing behaviour of ultra-high performance concrete(UHPC)as cement-based stress/strain self-sensing(CBSS)smart materials were investigated in the frequency range from 100 Hz to 300 kHz.By using the electrical parameters of the equivalent electric circuit model,the quantitative relations of capacitance and conductance of CBSS with the measurement frequency were derived.The capacitance and the conductance exhibit power-law type dependence on the measurement frequency.The calculated capacitance values at frequencies beyond 2 kHz and conductance values are consistent with the experimental results.The sweep-frequency test and the fixed-frequency test were performed to examine effects of the excitation frequencies on strain self-sensing properties of CBSS.The fractional change in capacitance(FCC)and resistance(FCR)of CBSS are frequency-dependent in the frequency range from 100 Hz to the f_(B),but frequency-independent in the frequency range from the f_(B)to 300 kHz.The f_(A)and the f_(B)are 1.7-4.0 kHz and 11-78 kHz depending on the fiber dosages,respectively.FCC and FCR reach their maximum at the f_(A)and 100 Hz,respectively.The responses of capacitance and resistance of CBSS to strain show good repeatability during cyclic loading.As the fiber dosage increases,capacitance-based sensitivity to strain increases initially and then decreases at the f_(A),and resistance-based sensitivity to strain of CBSS increases with increasing fiber contents.

Analysis on Genetic Diversity of 40 Flowering Cherry Cultivars and Construction of Molecular ID Based on SSR Markers

Studying on the genetic diversity and genetic relationship of flowering cherry cultivars is extremely important for germplasm conservation, cultivar identification and breeding. Flowering cherry is widely cultivated as an important woody ornamental plant in worldwide, especially Japan, China. However, owning to the morphological similarity, many cultivars are distinguished hardly in non-flowering season. Here, we evaluated the genetic diversity and genetic relationship of 40 flowering cherry cultivars, which are mainly cultivated in China. We selected 13 polymorphicprimers to amplify to allele fragments with fluorescent-labeled capillary electrophoresis technology. The population structure analysis results show that these cultivars could be divided into 4 subpopulations. At the population level, Na and Ne were 6.062, 4.326, respectively. Ho and He were 0.458 and 0.670, respectively. The Shannon’s information index (I) was 1.417. The Pop3, which originated from P. serrulata, had the highest Ho, He, and I among the 4 subpopulations. AMOVA showed that only 4% of genetic variation came from populations, the 39% variation came from individuals and 57% (p < 0.05) came from intra-individuals. 5 polymorphic SSR primers were selected to construct molecular ID code system of these cultivars. This analysis on the genetic diversity and relationship of the 40 flowering cherry cultivars will help to insight into the genetic background, relationship of these flowering cherry cultivars and promote to identify similar cultivars.