Silver-clad （Bi,Pb）2Sr2Ca2Cu3O10＋x long wires produced by powder-in-tube techniques, which have been recognized as the first generation of the High Temperature Superconducting （HTS） wires, are expected to apply w...Silver-clad （Bi,Pb）2Sr2Ca2Cu3O10＋x long wires produced by powder-in-tube techniques, which have been recognized as the first generation of the High Temperature Superconducting （HTS） wires, are expected to apply widely especially in strong current applications. In this work, the processing, characterization and application of the silver-clad （Bi,Pb）2Sr2Ca2Cu3Ol0＋x HTS wires are summarized. The HTS wires are fabricated using the combination of powder-in-tube technique, and the resulting wires are fully characterized by the means of chemical analyses, microstructural observation, electrical and magnetic measurements. The relationship among fabrication parameters, chemical and microstructural characteristics, and electrical and magnetic properties are analyzed. Applications of the HTS wires have also been introduced according to their strong current behaviors with various prototype devices made.展开更多
Powder in tube process（PIT） was adopted for the fabrication of single filament Bi-2223 tapes, and a heat treatment process including the first heat treatment（HT1）, intermediate rolling（IR）, and second heat treat...Powder in tube process（PIT） was adopted for the fabrication of single filament Bi-2223 tapes, and a heat treatment process including the first heat treatment（HT1）, intermediate rolling（IR）, and second heat treatment（HT2） was performed. The phase evolution mechanism and microstructure changes during these heat treatment processes were systematically discussed. The influences of HT1 parameters on the phase evolution process of Bi-2223 tapes were discussed. With the optimized HT1 process, a proper Bi-2223 content of about 90% was achieved. HT2 process was also optimized by adding a post annealing process. An obvious increase of current capacity was obtained due to the enhancement of intergrain connections. Single filament Bi-2223 tapes with the critical current of Ic-90 A were fabricated with the optimized sintering process.展开更多
After discovering high temperature superconducting materials 20 years ago, the preparation of applicable HTS materials has been pursued along with HTS mechanism and characteristic study. At present, the focus on the a...After discovering high temperature superconducting materials 20 years ago, the preparation of applicable HTS materials has been pursued along with HTS mechanism and characteristic study. At present, the focus on the applied HTS technology has been moving to the industrial preparations from the laboratory research stage, and the technology has been well verified for practical applications from small to large scales. The fabrication techniques of engineering HTS materials are being industrialized; and various HTS devices are also on the way towards practical applications. This paper provides a comprehensive summary on the applied high temperature superconductivity with regard to various applicable HTS materials, their preparation techniques and charac- terization, and applications in a wide range.展开更多
REBa_(2)Cu_(3)O_(7−δ)(REBCO,RE=rare earth)tapes doped with 5%and 15%Zr have been scaled up to lengths more than 40 m in a pilot‐scale advanced metal organic chemical vapor deposition(A‐MOCVD)tool.The precursor comp...REBa_(2)Cu_(3)O_(7−δ)(REBCO,RE=rare earth)tapes doped with 5%and 15%Zr have been scaled up to lengths more than 40 m in a pilot‐scale advanced metal organic chemical vapor deposition(A‐MOCVD)tool.The precursor compositions used for the long tapes were guided by a study of the influence of(Ba+dopant)/Cu content on the critical current density(Jc)of 5 and 15 mol.%Hf‐and Zr‐added tapes at 4.2 K and 13 T.The 40‐mlong tapes exhibited a critical current(Ic)over 4,000 A/12 mm at 4.2 K and 13 T as well as over 1,400 A/12 mm at 20 K and 20 T.The critical current densities of a 40‐m‐long tape doped with 5%Zr at 4.2 K measured at the National High Magnetic Field Laboratory(NHMFL)were>10 MAcm^(−2)and>5 MAcm^(−2)at 14 T and 30 T,respectively,which are over three times those of commercial REBCO tapes.The infield Jc of 5%Zradded 40‐m‐long tapes was similar to those of previously‐reported high‐performance short samples made with 15%Zr or Hf.These results demonstrate the excellent potential of A‐MOCVD for manufacturing high Ic REBCO tapes for use in ultrahigh‐field magnet applications.展开更多
针对高温超导故障限流器(high temperature superconductor-fault current limiter,HTS-FCL)的全网优化配置问题,提出了一种基于免疫算法的高温超导故障限流器Pareto多目标优化配置新方法。该方法综合考虑了限流器的成本和限流效果这2...针对高温超导故障限流器(high temperature superconductor-fault current limiter,HTS-FCL)的全网优化配置问题,提出了一种基于免疫算法的高温超导故障限流器Pareto多目标优化配置新方法。该方法综合考虑了限流器的成本和限流效果这2个优化目标。首先介绍了HTS-FCL的基本结构和原理,分析了安装高温超导故障限流器对原系统自阻抗的影响,提出了一种基于短路电流变化率的灵敏度计算方法,该方法可以缩小搜索空间,提高算法效率。然后分别建立了限流器成本评价子函数、限流效果评价子函数和多目标评价函数,制定了基于免疫算法的多目标Pareto优化算法流程,并在传统免疫算法的基础上提出了一种改进型的等成本倒位算子,通过仿真验证表明该算子较常规的免疫算法,能更好地收敛到最优解。最后以IEEE 39标准节点系统为例,实现了HTS-FCL的全网优化配置,验证了新方法的有效性,并求得了在综合考虑限流器成本和限流效果下的Pareto最优解集,设计者可以根据自己的意愿和实际情况在所求得的Pareto最优解集中选择合适的最优方案。展开更多
文摘Silver-clad （Bi,Pb）2Sr2Ca2Cu3O10＋x long wires produced by powder-in-tube techniques, which have been recognized as the first generation of the High Temperature Superconducting （HTS） wires, are expected to apply widely especially in strong current applications. In this work, the processing, characterization and application of the silver-clad （Bi,Pb）2Sr2Ca2Cu3Ol0＋x HTS wires are summarized. The HTS wires are fabricated using the combination of powder-in-tube technique, and the resulting wires are fully characterized by the means of chemical analyses, microstructural observation, electrical and magnetic measurements. The relationship among fabrication parameters, chemical and microstructural characteristics, and electrical and magnetic properties are analyzed. Applications of the HTS wires have also been introduced according to their strong current behaviors with various prototype devices made.
基金Funded by the National Natural Science Foundation of China(No.51472206)the National ITER Program of China(2015GB115001)the Program for Innovative Research Team in Shaanxi Province(No.2013KCT-07)
文摘Powder in tube process（PIT） was adopted for the fabrication of single filament Bi-2223 tapes, and a heat treatment process including the first heat treatment（HT1）, intermediate rolling（IR）, and second heat treatment（HT2） was performed. The phase evolution mechanism and microstructure changes during these heat treatment processes were systematically discussed. The influences of HT1 parameters on the phase evolution process of Bi-2223 tapes were discussed. With the optimized HT1 process, a proper Bi-2223 content of about 90% was achieved. HT2 process was also optimized by adding a post annealing process. An obvious increase of current capacity was obtained due to the enhancement of intergrain connections. Single filament Bi-2223 tapes with the critical current of Ic-90 A were fabricated with the optimized sintering process.
文摘After discovering high temperature superconducting materials 20 years ago, the preparation of applicable HTS materials has been pursued along with HTS mechanism and characteristic study. At present, the focus on the applied HTS technology has been moving to the industrial preparations from the laboratory research stage, and the technology has been well verified for practical applications from small to large scales. The fabrication techniques of engineering HTS materials are being industrialized; and various HTS devices are also on the way towards practical applications. This paper provides a comprehensive summary on the applied high temperature superconductivity with regard to various applicable HTS materials, their preparation techniques and charac- terization, and applications in a wide range.
基金funded by awards DE‐EE0007869 from the Department of Energy Advanced Materials and Manufacturing Technology Office and DE‐SC0016220 from the Department of Energy Office of ScienceThe measurements at NHMFL,Tallahassee was supported by NSF award DMR‐1644779。
文摘REBa_(2)Cu_(3)O_(7−δ)(REBCO,RE=rare earth)tapes doped with 5%and 15%Zr have been scaled up to lengths more than 40 m in a pilot‐scale advanced metal organic chemical vapor deposition(A‐MOCVD)tool.The precursor compositions used for the long tapes were guided by a study of the influence of(Ba+dopant)/Cu content on the critical current density(Jc)of 5 and 15 mol.%Hf‐and Zr‐added tapes at 4.2 K and 13 T.The 40‐mlong tapes exhibited a critical current(Ic)over 4,000 A/12 mm at 4.2 K and 13 T as well as over 1,400 A/12 mm at 20 K and 20 T.The critical current densities of a 40‐m‐long tape doped with 5%Zr at 4.2 K measured at the National High Magnetic Field Laboratory(NHMFL)were>10 MAcm^(−2)and>5 MAcm^(−2)at 14 T and 30 T,respectively,which are over three times those of commercial REBCO tapes.The infield Jc of 5%Zradded 40‐m‐long tapes was similar to those of previously‐reported high‐performance short samples made with 15%Zr or Hf.These results demonstrate the excellent potential of A‐MOCVD for manufacturing high Ic REBCO tapes for use in ultrahigh‐field magnet applications.
文摘针对高温超导故障限流器(high temperature superconductor-fault current limiter,HTS-FCL)的全网优化配置问题,提出了一种基于免疫算法的高温超导故障限流器Pareto多目标优化配置新方法。该方法综合考虑了限流器的成本和限流效果这2个优化目标。首先介绍了HTS-FCL的基本结构和原理,分析了安装高温超导故障限流器对原系统自阻抗的影响,提出了一种基于短路电流变化率的灵敏度计算方法,该方法可以缩小搜索空间,提高算法效率。然后分别建立了限流器成本评价子函数、限流效果评价子函数和多目标评价函数,制定了基于免疫算法的多目标Pareto优化算法流程,并在传统免疫算法的基础上提出了一种改进型的等成本倒位算子,通过仿真验证表明该算子较常规的免疫算法,能更好地收敛到最优解。最后以IEEE 39标准节点系统为例,实现了HTS-FCL的全网优化配置,验证了新方法的有效性,并求得了在综合考虑限流器成本和限流效果下的Pareto最优解集,设计者可以根据自己的意愿和实际情况在所求得的Pareto最优解集中选择合适的最优方案。
