Analytic calculation of magnetic force between two current-carrying coils

Current-carrying coils are basic elements in electromagnetic equipments, for example, in high field magnets from high temperature superconducting wires or tapes. In the assembly of these systems and their current-carrying operation, unavoidable mis- alignment and shift from the original position can be induced by disturbances such as the imbalance of magnetic force due to safety problems. For two current-carrying coils with non-coplanar axes, the analytic expression of the magnetic force between the two coils is presented according to the rule of Ampere circulation and the Biot-Savart law. Based on the expression, the dependence of the magnetic force on the size and the relative position of each other is further investigated, and the variation of the magnetic force is obtained with the above parameters.

MAGNETOELASTIC BENDING AND STABILITY OF CURRENT-CARRYING COIL STRUCTURES

As a results of magnetoelastic interaction, the mechanical behavior of current-carrying coil structures, such as deformation and instability, is a key problem in the design of strong held magnets. In this paper, a nonlinear mathematical model is presented to describe the deformation and buckling of D-type current-carrying coils, based on the Biot-Savart law and the bending theory of curved beams. The bending deformation, the critical value of current for the magnetoelastic buckling of the current-carrying coil, and the effects of the type and number of supports at middle part of the bending coil on the critical value are quantitatively investigated by a semi-analytical and semi-numerical method. The numerical results are shown to be in good agreement with the experimental data.

Gradient coil design with enhanced shielding constraint for a cryogen-free superconducting MRI system

The relatively fragile low-temperature stability of cryogen-free superconducting magnetic resonance imaging(MRI)magnets requires the careful management of exogenous heat sources.A strongly shielded gradient magnetic field is important for the optimal operation of cryogen-free MRI systems.In this study,we present an enhanced shielding method incorporating a regionalized stray field constraining strategy.By optimizing the constraint parameters,we could develop engineering-feasible gradient coil schemes without increasing system complexity but with the stray field intensity reduced by half.In real measurement in an integrated MRI system,the developed gradient assembly demonstrated good performance and supported to output images of excellent quality.Our findings suggested that the proposed method could potentially form a useful design paradigm for cryogen-free MRI magnets.

Analytical computation of magnetic field in coil-dominated superconducting quadrupole magnets based on racetrack coils

Currently,three types of superconducting quadrupole magnets are used in particle accelerators:cos 2θ,CCT,and serpentine.However,all three coil configurations have complex spatial geometries,which make magnet manufacturing and strain-sensitive superconductor applications difficult.Compared with the three existing quadrupole coils,the racetrack quadrupole coil has a simple shape and manufacturing process,but there have been few theoretical studies.In this paper,the two-dimensional and three-dimensional analytical expressions for the magnetic field in coil-dominated racetrack superconducting quadrupole magnets are presented.The analytical expressions of the field harmonics and gradient are fully resolved and depend only on the geometric parameters of the coil and current density.Then,a genetic algorithm is applied to obtain a solution for the coil geometry parameters with field harmonics on the order of 10^(-4).Finally,considering the practical engineering needs of the accelerator interaction region,electromagnetic design examples of racetrack quadrupole magnets with high gradients,large apertures,and small apertures are described,and the application prospects of racetrack quadrupole coils are analyzed.

Effect of coil and chamber structure on plasma radial uniformity in radio frequency inductively coupled plasma

Enhancing plasma uniformity can be achieved by modifying coil and chamber structures in radio frequency inductively coupled plasma(ICP)to meet the demand for large-area and uniformly distributed plasma in industrial manufacturing.This study utilized a two-dimensional self-consistent fluid model to investigate how different coil configurations and chamber aspect ratios affect the radial uniformity of plasma in radio frequency ICP.The findings indicate that optimizing the radial spacing of the coil enhances plasma uniformity but with a reduction in electron density.Furthermore,optimizing the coil within the ICP reactor,using the interior point method in the Interior Point Optimizer significantly enhances plasma uniformity,elevating it from 56%to 96%within the range of the model sizes.Additionally,when the chamber aspect ratio k changes from 2.8 to 4.7,the plasma distribution changes from a center-high to a saddleshaped distribution.Moreover,the plasma uniformity becomes worse.Finally,adjusting process parameters,such as increasing source power and gas pressure,can enhance plasma uniformity.These findings contribute to optimizing the etching process by improving plasma radial uniformity.

Fuzzy Proportional Integral Derivative control of a voice coil actuator system for adaptive deformable mirrors

Research on adaptive deformable mirror technology for voice coil actuators(VCAs)is an important trend in the development of large ground-based telescopes.A voice coil adaptive deformable mirror contains a large number of actuators,and there are problems with structural coupling and large temperature increases in their internal coils.Additionally,parameters of the traditional proportional integral derivative(PID)control cannot be adjusted in real-time to adapt to system changes.These problems can be addressed by introducing fuzzy control methods.A table lookup method is adopted to replace real-time calculations of the regular fuzzy controller during the control process,and a prototype platform has been established to verify the effectiveness and robustness of this process.Experimental tests compare the control performance of traditional and fuzzy proportional integral derivative(Fuzzy-PID)controllers,showing that,in system step response tests,the fuzzy control system reduces rise time by 20.25%,decreases overshoot by 78.24%,and shortens settling time by 67.59%.In disturbance rejection experiments,fuzzy control achieves a 46.09%reduction in the maximum deviation,indicating stronger robustness.The Fuzzy-PID controller,based on table lookup,outperforms the standard controller significantly,showing excellent potential for enhancing the dynamic performance and disturbance rejection capability of the voice coil motor actuator system.

Mathematical Modelling and Design of Helical Coil Heat Exchanger for Production of Hot Air for Fluidized Bed Dryer

In global industrialization, efforts have been made to increase the rate of heat transfer in heat exchanger, minimizing the size of heat exchanger to reduce cost as well as increasing the effectiveness. Helical coil heat exchanger (HCHE) has been proven to be effective in improving heat transfer due to its large surface area. In this study, HCHE was designed to provide hot air needed for fluidized bed drying processes. The HCHE design model was fabricated and evaluated to study the efficiency of the hot air output for a laboratory fluidized bed dryer. The mathematical model for estimation of the final (output) temperature of air, Taf, passing through the HCHE was developed and validated experimentally. The drying of bitter kola particulates was carried out with a drying temperature of 50C 3C and a bed height-to-bed diameter ratio (H/D) of 1.5. The time taken to dry bitter kola particulates to 0.4% moisture content was 1 hour 45 minutes. Hence, HCHE is recommended for use in the production of hot for laboratory-scale fluidized bed dryers.

Transient multi-physics behavior of an insert high temperature superconducting no-insulation coil in hybrid superconducting magnets with inductive coupling

A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet during the charging and discharging processes.The coupled problem is resolved by means of the finite element method(FEM)for the magneto-thermo-elastic behaviors and the Runge-Kutta method for the transient responses of the electrical circuits of the hybrid superconducting magnet system.The results reveal that the transient multi-physics responses of the insert NI coil primarily depend on the charging/discharging procedure of the hybrid magnet.Moreover,a reverse azimuthal current and a compressive hoop stress are induced in the insert NI coil during the charging process,while a forward azimuthal current and a tensile hoop stress are observed during the discharging process.The induced voltages in the insert NI coil can drive the currents flowing across the radial turns where the contact resistance exists.Therefore,it brings forth significant Joule heat,causing a temperature rise and a uniform distribution of this heat in the coil turns.Accordingly,a thermally/mechanically unstable or quenching event may be encountered when a high operating current is flowing in the insert NI coil.It is numerically predicted that a quick charging will induce a compressive hoop stress which may bring a risk of buckling instability in the coil,while a discharging will not.The simulations provide an insight of hybrid superconducting magnets under transient start-up or shutdown phases which are inevitably encountered in practical applications.

Degree of style coiling is associated with corolla-tube length in the nectarless flowers of Roscoea schneideriana

The plant-pollinator‘arms race’model posits that a major driver of the evolution of elongated corollas in flowers is reciprocal selection for‘morphological fit’between pollinator-tongue length and access distance to nectar(usually corolla-tube length).Evidence for the pollinator-mediated selection on tube length and evolution of multiple,correlated floral traits remains inconclusive.To gain possible insights into the strength of stabilizing selection by assessing standing phenotypic variation,we measured a series of functionally important floral traits,including corolla tube length and‘effective’tube depth and degree of style coiling.We then calculated coefficients of variation(CV)for these traits in three field populations of R.schneideriana.Unlike in most long-tubed flowers,the bottom part of the corolla tube is completely occupied by the style,with no room for nectar.The length of this portion of the corolla tube was more variable(higher CV)than the upper part of the corolla tube,suggesting that functional tube depth was under stronger stabilizing selection.The degree of style coiling was negatively related to the corolla-tube length in all three populations of R.schneideriana,suggesting that there may be conflicting selection acting on style length and corolla-tube length,which are otherwise usually tightly correlated.Given the lack of nectar in the flowers of this species,the long corolla tubes and long styles may represent morphological holdovers from ancestors that were pollinated by long-tongued pollinators,as is still seen in related species in the western Himalayas.

Mechanical compression management of the right middle cerebral artery inferior trunk using a stent during coil embolization of middle cerebral artery aneurysms:A case report and literature review

Endovascular coil embolization is a minimally invasive,rapid,and effective method for the treatment of intracranial aneurysms.However,complications associated with coil embolization,such as intraoperative aneurysm rupture or arterial occlusion,should be promptly managed during the procedure to avoid catastrophic consequences.This study presents a case of mechanical compression management of the right middle cerebral artery(MCA)inferior trunk during coil embolization for bilateral MCA aneurysms.The inferior trunk of the right MCA was abruptly occluded due to mechanical compression during coil embolization of the right MCA bifurcation aneurysm.A Solitaire AB stent(4×20 mm,Covidien/Medtronic,Dublin,Ireland)was implanted in the inferior trunk of the right MCA after tirofiban was injected via a microcatheter,and the right inferior trunk was recanalized.The patient also underwent coil embolization of the left MCA bifurcation aneurysm,without any complications.It is crucial to recognize compressive occlusion of adjacent aneurysm branches to avoid severe complications during intracranial aneurysm embolization.Stent placement is a rescue treatment option for recanalization of an occluded artery.

Fatigue Life Analysis of Coiled Tubing in Deep Well Jet Plugging Removal

The coiled tubing plugging has become the main means of plugging in gas Wells in Xinjiang. These Wells are deep and have high pressure, which can easily affect the fatigue life of the operating coiled tubing. In order to improve the life of coiled tubing in high-pressure gas Wells, this paper studies the plugging conditions of coiled tubing in high-pressure ultra-deep Wells. Firstly, the cross section deformation of coiled tubing under high internal pressure is analyzed. Secondly, the factors influencing the fatigue life of coiled tubing and the influence of surface damage on the fatigue life of coiled tubing were studied. Finally, the mechanism of furrow damage caused by coiled tubing and the main measures to reduce furrow damage are analyzed. The following suggestions are made to improve the life of coiled tubing: select the right material and the right size coiled tubing;Use appropriate measures to prevent premature coiled tubing failure and reduce operating costs.

Stent-assisted coiling of intracranial carotid ophthalmic segment aneurysm segment aneurysms:Long-term follow-up from a single center

Background:To evaluate the efficacy of stent-assisted coiling(SAC)for the treatment of carotid ophthalmic segment aneurysm segment aneurysms(OSAs)of the internal carotid artery(ICA)through detailed long-term follow-up of a large patient cohort.Methods:We retrospectively analyzed 88 consecutive patients with OSAs between January 2009 and January 2020 at our center.Angiographic results were evaluated using the modified Raymond grading system and clinical outcomes were evaluated using the mRS scale.The primary endpoints were major aneurysm recurrence and poor clinical outcomes for at least 18 months of follow-up.The patients were asked to attend clinical follow-up assessments and possibly undergo DSA or MR via telephone.Results:We enrolled 88 patients with 99 OSAs treated with coiling,of whom 76 were treated with SAC.The coiling procedures were successful in all 88 patients.Overall,complications occurred in 8 patients(9.1%).No procedure-related mortality was observed.67(76.1%)experienced immediate aneurysm occlusion at the end of the procedure.Long-term angiographic follow-up(18 months)was available in 45/88 aneurysms(51%)(average 18.7±5.2 months).Four patients continued their follow-up for 5 years after initial aneurysm treatment.After a clinical follow-up time of 28.7 months(range,12-51 months),85 patients(95.5%)achieved favorable clinical outcomes(mRS scores of 0-2).Conclusions:This study indicates that SAC treatment is a safe and effective therapeutic alternative for ruptured and unruptured OSAs.The procedural risks are low with relatively long-term effectiveness.

Accurate surface normal representation to facilitate gradient coil optimization on curved surface

The design methods for gradient coils are mostly based on discrete extrinsic methods(e.g.,the BioteSavart integration calculation),for which the surface normal vector strongly influences any numerical calculation of the discretized surface.Previous studies are mostly based on regular or analytical surfaces,which allow normal vectors to be expressed analytically.For certain applications,design methods for extending currentcarrying surfaces from developable or analytic geometries to arbitrary surfaces generated from a scanned point cloud are required.The key task is to correctly express the discretized normal vectors to ensure geometrical accuracy of the designed coils.Mathematically,it has been proven that applying a Delaunay triangulation to approximate a smooth surface can result in the discrete elemental normal vectors converging to those of the original surface.Accordingly,this article uses Delaunay triangulation to expand upon previous design methods so that they encompass arbitrary piecewise continuous surfaces.Two design methods,the stream function and the so-called solid isotropic material with penalization(SIMP)method,are used to design circumvolute and noncircumvolute gradient coils on general surfaces.

Design of Online Vision Detection System for Stator Winding Coil

The quality of the stator winding coil directly affects the performance of the motor.A dual-camera online machine vision detection method to detect whether the coil leads and winding regions were qualified was designed.A vision detection platform was designed to capture individual winding images,and an image processing algorithm was used for image pre-processing,template matching and positioning of the coil lead area to set up a coordinate system.After eliminating image noise by Blob analysis,the improved Canny algorithm was used to detect the location of the coil lead paint stripped region,and the time was reduced by about half compared to the Canny algorithm.The coil winding region was trained with the ShuffleNet V2-YOLOv5s model for the dataset,and the detect file was converted to the Open Neural Network Exchange(ONNX)model for the detection of winding cross features with an average accuracy of 99.0%.The software interface of the detection system was designed to perform qualified discrimination tests on the workpieces,and the detection data were recorded and statistically analyzed.The results showed that the stator winding coil qualified discrimination accuracy reached 96.2%,and the average detection time of a single workpiece was about 300 ms,while YOLOv5s took less than 30 ms.

Design of new resonant magnetic perturbation coils on the J-TEXT tokamak

The resonant magnetic perturbation(RMP)system is a powerful auxiliary system on tokamaks.On the J-TEXT tokamak,a set of new in-vessel coils is designed to enhance the amplitude of the RMP.The new coils are designed to be two-turn saddle coils.These two-turn saddle coils have been optimized in terms of their structure,support,and protection components to overcome the limitations of the narrow in-vessel space,resulting in a compact coil module that can be accommodated in the vessel.To verify the feasibility of this design,an electromagnetic simulation is performed to investigate the electrical parameters and the generated field of the coils.A multi-field coupled simulation is performed to investigate the capacity of heat dissipation.As a result of these efforts,the new RMP coils have been successfully installed on the J-TEXT tokamak.It has significantly enhanced the RMP amplitude and been widely applied in experiments.

应用脉冲回波的避雷线断线检测系统研究

为高效率、低成本地检测风力发电机组桨叶避雷线断线位置,设计基于脉冲回波的避雷线断线检测系统。该系统以单端行波法为原理,由信号发生模块,传感器模块,信号采集模块、控制器模块四部分构成。信号发生模块负责产生行波脉冲信号,传感器模块负责采集回波信号,信号采集模块负责将采集到的回波信号处理转化送给控制模块,控制模块负责分析回波信号,判断故障类型和故障点位置。该文对各个模块的电路和性能参数进行设计,搭建整体的检测系统。经实验验证,该系统可以精准的实现断线判断,并获得断线位置,测量误差精确到0.5 m以内。

基于凸型线圈双向电磁力加载的管件电磁翻边成形

传统线圈电磁力单一导致管件翻边角度不佳。本文提出采用凸型线圈管件翻边的方法,通过设计新型线圈,同时为管件翻边提供双向电磁力。建立了两组模型,分别采用传统线圈和凸型线圈驱动管件发生电磁翻边成形,探讨分析了两组管件模型翻边成形过程中的电磁力矢量以及变形速率的变化。结果表明,凸型线圈加载管件翻边时提供的双向电磁力极大地提高了管件变形的流动性,从而提高了翻边角度。此外,相同放电参数下基于凸型线圈的管件翻边角度较传统线圈提高了1.25倍。显然,新型线圈能够在一定程度上改善管件电磁翻边的质量问题,为电磁翻边成形的工业化应用提供更多可能。

RBM20和MURC双基因杂合变异对心肌细胞结构和生物学特性的影响

目的探讨RNA结合基元蛋白20(RBM20)和肌肉相关卷曲螺旋蛋白(MURC)双基因杂合变异对人心肌细胞AC16(成人左心室心肌细胞系)结构和生物学特性的影响。方法构建对照组、空载组、野生组、MURC或RBM20单基因突变组、RBM20和MURC双基因突变组的心肌细胞AC16;采用Western blotting、免疫荧光染色和实时荧光定量PCR观察心肌细胞中RBM20和MURC定位、细胞表面积、骨架排列、骨架相关蛋白、细胞极性、细胞内钙浓度;采用流式细胞术检测心肌细胞凋亡;采用Ki-67染色检测心肌细胞增殖;采用划痕实验检测心肌细胞迁移。结果与RBM20或MURC单基因突变相比,RBM20和MURC双基因突变对心肌细胞结构和生物学特性影响更显著,表现为细胞表面积增大,细胞肥大相关基因肌球蛋白重链7和α肌动蛋白基因m RNA表达升高,骨架排列紊乱度升高,骨架蛋白β-tubulin和Vinculin荧光强度降低(均P<0.01);极性蛋白Part6荧光强度升高(P<0.05);心肌细胞凋亡率升高,增殖活性下降,迁移率增高,细胞内钙离子浓度升高(均P<0.01)。结论RBM20和MURC双基因杂合变异使心肌细胞结构及生物学特性发生改变,表现为细胞表面积增大,骨架排列紊乱,极性改变,凋亡率和迁移率升高,增殖活性和钙处理能力降低。

磁聚焦式扭矩传感器激励线圈控制策略研究

为测量旋转轴不同工况下的扭矩,提出了一种基于磁聚焦式扭矩传感器的激励线圈控制策略。该控制策略以控制传感器稳定输出幅值为2 mV电信号为目标,将感应电压数学模型和正交试验法相结合,对各个工况下的激励线圈控制策略进行设计,并利用MATLAB和COMSOL软件对各控制策略进行理论计算和有限元仿真验证。为模拟传感器在台架实验中得到的带噪声信号,对仿真得到的输出电信号添加高斯白噪声,利用MATLAB仿真软件对带噪声信号进行滤波优化。仿真结果表明:该控制策略能够使传感器在旋转轴的不同工况下,稳定输出幅值为2 mV的类正弦电压信号,验证了其可行性。

钻孔瞬变电磁法方位线圈扫描探测定位方法

利用掘进巷道超前探水钻孔进行钻孔瞬变电磁法探测钻孔孔壁外围远距离含水体,避免了常规测井方法仅能探测钻孔孔壁岩层的“一孔之见”。目前钻孔瞬变电磁法受全空间效应的影响,接收到的单分量响应不能判别异常体方位;多分量响应可以近似判断异常体的大致方位,但难以通过成像等直观有效的方法对其进行精确定位。基于钻孔瞬变电磁法和方位电磁波测井相关理论,提出了钻孔瞬变电磁法方位线圈扫描探测定位方法,采用方位线圈作为探测装置,减小线圈互感,增强钻孔瞬变电磁法的探测效果。同时,通过改变线圈旋转角,对钻孔孔壁进行360°扫描,形成钻孔径向全方位探测,旨在对钻孔孔壁外围岩体中的低阻体进行精确定位。首先推导方位线圈的互感解析表达式,探讨方位角对方位线圈互感的影响,通过数值计算确定最佳方位角取值。分别建立均匀介质和含低阻异常体的钻孔全空间三维地质-地球物理模型进行瞬变电磁场数值模拟,分析方位线圈的瞬变电磁法扫描探测多分量响应特征,总结方位线圈扫描探测瞬变电磁响应规律,确定了钻孔瞬变电磁法方位线圈扫描探测定位方法,即通过钻孔轴向和径向的瞬变电磁响应特征判别钻孔孔壁外围岩体中低阻异常体的位置。最后建立含2个低阻体的地质-地球物理模型,采用最佳方位角的方位线圈进行数值实验,验证了该方法能有效地判别低阻异常体的方位。研究表明:钻孔瞬变电磁法方位线圈扫描探测结果可以较好地反映钻孔径向外围岩体中低阻异常体引起的瞬变电磁场异常,全空间视电阻率成像结果分辨率较高。依据钻孔轴向和径向的瞬变电磁响应特征,钻孔瞬变电磁法方位线圈扫描探测定位方法对钻孔孔壁外围岩体中的低阻异常体具有较高的分辨率及定位精度。研究结果可以为钻孔瞬变电磁法方位线圈扫描探测定位方法的实际应用提供理论依据。