Due to the novel applications of flexible pipes conveying fluid in the field of soft robotics and biomedicine,the investigations on the mechanical responses of the pipes have attracted considerable attention.The fluid...Due to the novel applications of flexible pipes conveying fluid in the field of soft robotics and biomedicine,the investigations on the mechanical responses of the pipes have attracted considerable attention.The fluid-structure interaction(FSI)between the pipe with a curved shape and the time-varying internal fluid flow brings a great challenge to the revelation of the dynamical behaviors of flexible pipes,especially when the pipe is highly flexible and usually undergoes large deformations.In this work,the geometrically exact model(GEM)for a curved cantilevered pipe conveying pulsating fluid is developed based on the extended Hamilton's principle.The stability of the curved pipe with three different subtended angles is examined with the consideration of steady fluid flow.Specific attention is concentrated on the large-deformation resonance of circular pipes conveying pulsating fluid,which is often encountered in practical engineering.By constructing bifurcation diagrams,oscillating shapes,phase portraits,time traces,and Poincarémaps,the dynamic responses of the curved pipe under various system parameters are revealed.The mean flow velocity of the pulsating fluid is chosen to be either subcritical or supercritical.The numerical results show that the curved pipe conveying pulsating fluid can exhibit rich dynamical behaviors,including periodic and quasi-periodic motions.It is also found that the preferred instability type of a cantilevered curved pipe conveying steady fluid is mainly in the flutter of the second mode.For a moderate value of the mass ratio,however,a third-mode flutter may occur,which is quite different from that of a straight pipe system.展开更多
The Green function method (GFM) is utilized to analyze the in-plane forced vibration of curved pipe conveying fluid, where the randomicity and distribution of the external excitation and the added mass and damping r...The Green function method (GFM) is utilized to analyze the in-plane forced vibration of curved pipe conveying fluid, where the randomicity and distribution of the external excitation and the added mass and damping ratio are considered. The Laplace transform is used, and the Green functions with various boundary conditions are obtained subsequently. Numerical calculations are performed to validate the present solutions, and the effects of some key parameters on both tangential and radial displacements are further investigated. The forced vibration problems with linear and nonlinear motion constraints are also discussed briefly. The method can be radiated to study other forms of forced vibration problems related with pipes or more extensive issues.展开更多
This paper proposes a new method for investigating the Hopf bifurcation of a curved pipe conveying fluid with nonlinear spring support.The nonlinear equation of motion is derived by forces equilibrium on microelement ...This paper proposes a new method for investigating the Hopf bifurcation of a curved pipe conveying fluid with nonlinear spring support.The nonlinear equation of motion is derived by forces equilibrium on microelement of the system under consideration.The spatial coordinate of the system is discretized by the differential quadrature method and then the dynamic equation is solved by the Newton-Raphson method.The numerical solutions show that the inner fluid velocity of the Hopf bifurcation point of the curved pipe varies with different values of the parameter, nonlinear spring stiffness.Based on this,the cycle and divergent motions are both found to exist at specific fluid flow velocities with a given value of the nonlinear spring stiffness.The results are useful for further study of the nonlinear dynamic mechanism of the curved fluid conveying pipe.展开更多
Investigated in this study is the flow induced vibration of a nonlinearly restrained curved pipe conveying fluid. The nonlinear equation of motion is derived by equilibrium of forces on microelement of the system und...Investigated in this study is the flow induced vibration of a nonlinearly restrained curved pipe conveying fluid. The nonlinear equation of motion is derived by equilibrium of forces on microelement of the system under consideration. The spatial coordinate of the system is discretized by DQM (differential quadrature method). On the basis of the boundary conditions, the dynamic equation is solved by the Newton Raphson iteration method. The numerical solutions reveal several complex dynamic motions for the variation of the fluid velocity parameter, such as limit cycle motion, buckling and so on. The result obtained also shows that the sub parameter regions corresponding to the several motions may change with the variation of some parameters of the curved pipe. The present study supplies a new reference for investigating the nonlinear dynamic response of some other structures.展开更多
Laying head is a high-precision engineering device in hot-rolled high speed wire rod production line. Previously research works are focused on the laying pipe wear-resisting. Laying pipe curve design method based on w...Laying head is a high-precision engineering device in hot-rolled high speed wire rod production line. Previously research works are focused on the laying pipe wear-resisting. Laying pipe curve design method based on wire rod kinematics and dynamics analyses are not reported before. In order to design and manufacture the laying pipe, the motion and force process of the wire rod in the laying pipe should be studied. In this paper, a novel approach is proposed to investigate the force modeling for hot-rolled wire rod in laying pipe. An idea of limited element method is used to analysis and calculates the forces between laying pipe inner surface and wire rod. The design requirements of laying pipe curve for manufacturing are discussed. The kinematics and dynamics modeling for numerical calculation are built. A laying pipe curve equation is proposed by discussing design boundary conditions. Numerical results with di erent laying pipe curves design parameters are plotted and compared. The proposed approach performs good result which can be applied for laying pipe curve design and analysis for engineering application.展开更多
The flow and convected heat transfer of the Oldroyd-B fluids in a rotating curved pipe with circular cross-section were investigated by employing a perturbation method. A perturbation solution up to the second order w...The flow and convected heat transfer of the Oldroyd-B fluids in a rotating curved pipe with circular cross-section were investigated by employing a perturbation method. A perturbation solution up to the second order was obtained for a small curvature ratio, κ. The variations of axial velocity distribution and secondary flow structure with F, Re and We were discussed in detail in order to investigate the combined effects of the three parameters on flow structure. The combined effects of the Coriolis force, inertia force and elastic force on the temperature distribution were also analyzed, which are greater than the adding independent effects of the three forces. The variations of the flow rate and Nusselt number with the rotation, inertia and elasticity were examined as well. The results show the characteristics of the heat and mass transfer of the Oldroyd-B fluids in a rotating curved pipe.展开更多
The combined effects of the system rotation (Coriolis force) and curvature (centrifugal force) on the flow in rotating curved circular pipe with small curvature are examined by perturbation method. A second order per...The combined effects of the system rotation (Coriolis force) and curvature (centrifugal force) on the flow in rotating curved circular pipe with small curvature are examined by perturbation method. A second order perturbation solution is presented. The secondary flow structure and the primary axial velocity distributions are studied in detail. The loops of the secondary flow are more complex than those in a curved pipe without rotation or a rotating straight pipe. Its numbers depend on the body force ratio F which represents the ratio of the Coriolis to the centrifugal force. The maximum of the axial velocity is pushed to either outer bend or inner bend, which is also determined by F. The results are confirmed by the results of other authors who studied the same problem by different methods.展开更多
WT5”BZ]In this paper, the flow in a rotating curved annular pipe is examined by a perturbation method. A second order perturbation solution is presented. The characteristics of the secondary flow and the axial flow a...WT5”BZ]In this paper, the flow in a rotating curved annular pipe is examined by a perturbation method. A second order perturbation solution is presented. The characteristics of the secondary flow and the axial flow are studied in detail. The study indicates that the loops of the secondary flow are more complex than those in a curved annular pipe without rotation and its numbers depend on the ratio of the Coriolis force to centrifugal force F. As F≈-1, the secondary flow has eight loops and its intensity reaches the minimum value, and the distribution of the axial flow is like that of the Poiseuille flow. The position of the maximum axial velocity is pushed to either outer bend or inner bend, which is also determined by F. [WT5”HZ]展开更多
Three-dimensional laminar flow in the entrance region of rotating curved pipes was investigated. The governing equations were written in an orthogonal curvilinear coordinate system and solved with a fully three-dimens...Three-dimensional laminar flow in the entrance region of rotating curved pipes was investigated. The governing equations were written in an orthogonal curvilinear coordinate system and solved with a fully three-dimensional numerical method. The development of secondary flow, axial velocity, local and average friction factors for different cases of rotation were given and discussed in detail. The results show that rotation influences the flow structure and friction factor greatly and that the secondary flow is sink-type in the early stage of development and then turns to vortex structure. The average friction factor and the intensity of secondary flow have drastic decrease near the entrance. At some proper rotation, the average friction factor can be noticeably reduced.展开更多
A numerical study was conducted for the fully developed laminar flow in rotating curved elliptical pipe. Due to the rotation, the Coriolis force can also contribute to the secondary flow. The interaction of rotation a...A numerical study was conducted for the fully developed laminar flow in rotating curved elliptical pipe. Due to the rotation, the Coriolis force can also contribute to the secondary flow. The interaction of rotation and curvature complicates the flow characteristics. The boundary-fitted coordinate was adopted to study the flow characteristic in the rotating systems. The effects of rotation on the flow transition were studied in detail. The generation and mergence of vortices in rotating curved elliptical pipes were also captured for the first time. The simulation results show that the flow for the case of large aspect ratio of the cross-section is more likely to be unstable than that for smaller one.展开更多
In recent years, in reaction to the increasing usage of urban areas, the excavation of underground spaces has been developed. One of the most challenging issues encountered by engineers is the construction of subway s...In recent years, in reaction to the increasing usage of urban areas, the excavation of underground spaces has been developed. One of the most challenging issues encountered by engineers is the construction of subway stations as large underground spaces at shallow depth with soft surrounding soils. In this paper, Naghshe Jahan Square subway station located in Isfahan, Iran, has been simulated by geomechanical fnite difference method(FDM). This station is located under important historical structures. Therefore, the ground displacement and surface settlement induced by the excavation of the subway station should be strictly controlled. Many of such problems are affected by selected excavation method. For these reasons, different underground excavation methods associated with construction have been studied. In this study, sequential excavation method and large-diameter curved pipe roofng method are used and the numerical results of the two methods are compared. The presence of groundwater table obliges us to choose special techniques for the stability of the ground around the subway station during construction; hence compressed air and ground freezing techniques are utilized in the simulations of the subway station. Finally, after choosing appropriate support systems, the large-diameter curved pipe roofng method with 1.5 m spacing between curved pipes is proposed.展开更多
A numerical study on the characteristics of developing turbulent flow in a curved pipe with a baffle was carried out in body-fitted coordinates with the k-ε model turbulence. A curved duct of square cross-section was...A numerical study on the characteristics of developing turbulent flow in a curved pipe with a baffle was carried out in body-fitted coordinates with the k-ε model turbulence. A curved duct of square cross-section was examined first, and the results agree very well with the experimental data. Then two kinds of pipes, a normal curved pipe and that with a baffle were studied. The computational results are presented and compared with each other to illustrate the changes of the flow after adding the baffle. The longitudinal velocity in the pipe with a baffle was characterized by outer velocity bigger than the inner one. The secondary flow was characterized by four-vortex structure with the intensity reduced, which results in the equability of the flow field of the cross-section compared with that without a baffle, and has much more significant meaning in engineering.展开更多
基金Project supported by the National Natural Science Foundation of China (Nos.12072119,12325201,and 52205594)the China National Postdoctoral Program for Innovative Talents (No.BX20220118)。
文摘Due to the novel applications of flexible pipes conveying fluid in the field of soft robotics and biomedicine,the investigations on the mechanical responses of the pipes have attracted considerable attention.The fluid-structure interaction(FSI)between the pipe with a curved shape and the time-varying internal fluid flow brings a great challenge to the revelation of the dynamical behaviors of flexible pipes,especially when the pipe is highly flexible and usually undergoes large deformations.In this work,the geometrically exact model(GEM)for a curved cantilevered pipe conveying pulsating fluid is developed based on the extended Hamilton's principle.The stability of the curved pipe with three different subtended angles is examined with the consideration of steady fluid flow.Specific attention is concentrated on the large-deformation resonance of circular pipes conveying pulsating fluid,which is often encountered in practical engineering.By constructing bifurcation diagrams,oscillating shapes,phase portraits,time traces,and Poincarémaps,the dynamic responses of the curved pipe under various system parameters are revealed.The mean flow velocity of the pulsating fluid is chosen to be either subcritical or supercritical.The numerical results show that the curved pipe conveying pulsating fluid can exhibit rich dynamical behaviors,including periodic and quasi-periodic motions.It is also found that the preferred instability type of a cantilevered curved pipe conveying steady fluid is mainly in the flutter of the second mode.For a moderate value of the mass ratio,however,a third-mode flutter may occur,which is quite different from that of a straight pipe system.
基金Project supported by the National Science and Technology Major Project(NMP)of China(No.2013ZX04011-011)
文摘The Green function method (GFM) is utilized to analyze the in-plane forced vibration of curved pipe conveying fluid, where the randomicity and distribution of the external excitation and the added mass and damping ratio are considered. The Laplace transform is used, and the Green functions with various boundary conditions are obtained subsequently. Numerical calculations are performed to validate the present solutions, and the effects of some key parameters on both tangential and radial displacements are further investigated. The forced vibration problems with linear and nonlinear motion constraints are also discussed briefly. The method can be radiated to study other forms of forced vibration problems related with pipes or more extensive issues.
基金Project supported by the National Natural Science Foundation of China(No.10272051).
文摘This paper proposes a new method for investigating the Hopf bifurcation of a curved pipe conveying fluid with nonlinear spring support.The nonlinear equation of motion is derived by forces equilibrium on microelement of the system under consideration.The spatial coordinate of the system is discretized by the differential quadrature method and then the dynamic equation is solved by the Newton-Raphson method.The numerical solutions show that the inner fluid velocity of the Hopf bifurcation point of the curved pipe varies with different values of the parameter, nonlinear spring stiffness.Based on this,the cycle and divergent motions are both found to exist at specific fluid flow velocities with a given value of the nonlinear spring stiffness.The results are useful for further study of the nonlinear dynamic mechanism of the curved fluid conveying pipe.
文摘Investigated in this study is the flow induced vibration of a nonlinearly restrained curved pipe conveying fluid. The nonlinear equation of motion is derived by equilibrium of forces on microelement of the system under consideration. The spatial coordinate of the system is discretized by DQM (differential quadrature method). On the basis of the boundary conditions, the dynamic equation is solved by the Newton Raphson iteration method. The numerical solutions reveal several complex dynamic motions for the variation of the fluid velocity parameter, such as limit cycle motion, buckling and so on. The result obtained also shows that the sub parameter regions corresponding to the several motions may change with the variation of some parameters of the curved pipe. The present study supplies a new reference for investigating the nonlinear dynamic response of some other structures.
基金China Postdoctoral Science Foundation Project(Grant No.2017M611184)
文摘Laying head is a high-precision engineering device in hot-rolled high speed wire rod production line. Previously research works are focused on the laying pipe wear-resisting. Laying pipe curve design method based on wire rod kinematics and dynamics analyses are not reported before. In order to design and manufacture the laying pipe, the motion and force process of the wire rod in the laying pipe should be studied. In this paper, a novel approach is proposed to investigate the force modeling for hot-rolled wire rod in laying pipe. An idea of limited element method is used to analysis and calculates the forces between laying pipe inner surface and wire rod. The design requirements of laying pipe curve for manufacturing are discussed. The kinematics and dynamics modeling for numerical calculation are built. A laying pipe curve equation is proposed by discussing design boundary conditions. Numerical results with di erent laying pipe curves design parameters are plotted and compared. The proposed approach performs good result which can be applied for laying pipe curve design and analysis for engineering application.
基金the National Natural Science Foundation of China(Grant No. 10272096).
文摘The flow and convected heat transfer of the Oldroyd-B fluids in a rotating curved pipe with circular cross-section were investigated by employing a perturbation method. A perturbation solution up to the second order was obtained for a small curvature ratio, κ. The variations of axial velocity distribution and secondary flow structure with F, Re and We were discussed in detail in order to investigate the combined effects of the three parameters on flow structure. The combined effects of the Coriolis force, inertia force and elastic force on the temperature distribution were also analyzed, which are greater than the adding independent effects of the three forces. The variations of the flow rate and Nusselt number with the rotation, inertia and elasticity were examined as well. The results show the characteristics of the heat and mass transfer of the Oldroyd-B fluids in a rotating curved pipe.
文摘The combined effects of the system rotation (Coriolis force) and curvature (centrifugal force) on the flow in rotating curved circular pipe with small curvature are examined by perturbation method. A second order perturbation solution is presented. The secondary flow structure and the primary axial velocity distributions are studied in detail. The loops of the secondary flow are more complex than those in a curved pipe without rotation or a rotating straight pipe. Its numbers depend on the body force ratio F which represents the ratio of the Coriolis to the centrifugal force. The maximum of the axial velocity is pushed to either outer bend or inner bend, which is also determined by F. The results are confirmed by the results of other authors who studied the same problem by different methods.
文摘WT5”BZ]In this paper, the flow in a rotating curved annular pipe is examined by a perturbation method. A second order perturbation solution is presented. The characteristics of the secondary flow and the axial flow are studied in detail. The study indicates that the loops of the secondary flow are more complex than those in a curved annular pipe without rotation and its numbers depend on the ratio of the Coriolis force to centrifugal force F. As F≈-1, the secondary flow has eight loops and its intensity reaches the minimum value, and the distribution of the axial flow is like that of the Poiseuille flow. The position of the maximum axial velocity is pushed to either outer bend or inner bend, which is also determined by F. [WT5”HZ]
基金Project supported by the National Natural Science Foundation of China (Grant No: 10272096).
文摘Three-dimensional laminar flow in the entrance region of rotating curved pipes was investigated. The governing equations were written in an orthogonal curvilinear coordinate system and solved with a fully three-dimensional numerical method. The development of secondary flow, axial velocity, local and average friction factors for different cases of rotation were given and discussed in detail. The results show that rotation influences the flow structure and friction factor greatly and that the secondary flow is sink-type in the early stage of development and then turns to vortex structure. The average friction factor and the intensity of secondary flow have drastic decrease near the entrance. At some proper rotation, the average friction factor can be noticeably reduced.
基金the National Natural Science Foundation of China(Grant No: 10272096)
文摘A numerical study was conducted for the fully developed laminar flow in rotating curved elliptical pipe. Due to the rotation, the Coriolis force can also contribute to the secondary flow. The interaction of rotation and curvature complicates the flow characteristics. The boundary-fitted coordinate was adopted to study the flow characteristic in the rotating systems. The effects of rotation on the flow transition were studied in detail. The generation and mergence of vortices in rotating curved elliptical pipes were also captured for the first time. The simulation results show that the flow for the case of large aspect ratio of the cross-section is more likely to be unstable than that for smaller one.
文摘In recent years, in reaction to the increasing usage of urban areas, the excavation of underground spaces has been developed. One of the most challenging issues encountered by engineers is the construction of subway stations as large underground spaces at shallow depth with soft surrounding soils. In this paper, Naghshe Jahan Square subway station located in Isfahan, Iran, has been simulated by geomechanical fnite difference method(FDM). This station is located under important historical structures. Therefore, the ground displacement and surface settlement induced by the excavation of the subway station should be strictly controlled. Many of such problems are affected by selected excavation method. For these reasons, different underground excavation methods associated with construction have been studied. In this study, sequential excavation method and large-diameter curved pipe roofng method are used and the numerical results of the two methods are compared. The presence of groundwater table obliges us to choose special techniques for the stability of the ground around the subway station during construction; hence compressed air and ground freezing techniques are utilized in the simulations of the subway station. Finally, after choosing appropriate support systems, the large-diameter curved pipe roofng method with 1.5 m spacing between curved pipes is proposed.
文摘A numerical study on the characteristics of developing turbulent flow in a curved pipe with a baffle was carried out in body-fitted coordinates with the k-ε model turbulence. A curved duct of square cross-section was examined first, and the results agree very well with the experimental data. Then two kinds of pipes, a normal curved pipe and that with a baffle were studied. The computational results are presented and compared with each other to illustrate the changes of the flow after adding the baffle. The longitudinal velocity in the pipe with a baffle was characterized by outer velocity bigger than the inner one. The secondary flow was characterized by four-vortex structure with the intensity reduced, which results in the equability of the flow field of the cross-section compared with that without a baffle, and has much more significant meaning in engineering.