Hybrid Nanofluid Flow over a Stretching Curved Surface with Induced Magnetic Field and Homogeneous-Heterogeneous Reactions

This study explores the 2D stretching flow of a hybrid nanofluid over a curved surface influenced by a magnetic field and reactions. A steady laminar flow model is created with curvilinear coordinates, considering thermal radiation, suction, and magnetic boundary conditions. The nanofluid is made of water with copper and MWCNTs as nanoparticles. The equations are transformed into nonlinear ODEs and solved numerically. The model’s accuracy is confirmed by comparing it with published data. Results show that fluid velocity increases, temperature decreases, and concentration increases with the curvature radius parameter. The hybrid nanofluid is more sensitive to magnetic field changes in velocity, while the nanofluid is more sensitive to magnetic boundary coefficient changes. These insights can optimize heat and mass transfer in industrial processes like chemical reactors and wastewater treatment.

A new method for specular curved surface defect inspection based on reflected pattern integrity

Defect inspection of specular curved surface is a challenging job. Taking steel balls for example, a new method based on reflected pattern integrity recognition is put forward. The specular steel ball surface will totally reflect the patterns when it is placed inside a dome-shaped light source, whose inner wall is modified by patterns with certain regular. Distortion or intermittence of reflected pattern will occur at the defective part, which indicates the pattern has lost its integrity. Based on the integrity analysis of reflected pattern images？ surface defects can be revealed. In this paper, a set of concentric circles are used as the pattern and an image processing algorithm is customized to extract the surface defects. Results show that the proposed method is effective for the specular curved surface defect inspection

STUDY ON THE METHOD OF CONSTRUCTING RATIONAL CUBIC CURVES AND CURVED SURFACE INCLUDING CONTROLLING PARAMETERS

By adopting the method of controlling parameters this paper describes the construction of various kinds of cubic curve segment and curved surface fragment with rational and non rational parameters, and discusses the relationship between controlling parameters, weighted factors and types, kinds and characteristics of curve segments and curved surface fragments. A mathematical method is provided for CAGD with abundant connotations, broad covering region, convenience, flexibility and direct simplicity.

Programmable robotized‘transfer-and-jet’printing for large,3D curved electronics on complex surfaces

Large,3D curved electronics are a trend of the microelectronic industry due to their unique ability to conformally coexist with complex surfaces while retaining the electronic functions of 2D planar integrated circuit technologies.However,these curved electronics present great challenges to the fabrication processes.Here,we propose a reconfigurable,mask-free,conformal fabrication strategy with a robot-like system,called robotized‘transfer-and-jet’printing,to assemble diverse electronic devices on complex surfaces.This novel method is a ground-breaking advance with the unique capability to integrate rigid chips,flexible electronics,and conformal circuits on complex surfaces.Critically,each process,including transfer printing,inkjet printing,and plasma treating,are mask-free,digitalized,and programmable.The robotization techniques,including measurement,surface reconstruction and localization,and path programming,break through the fundamental constraints of 2D planar microfabrication in the context of geometric shape and size.The transfer printing begins with the laser lift-off of rigid chips or flexible electronics from donor substrates,which are then transferred onto a curved surface via a dexterous robotic palm.Then the robotic electrohydrodynamic printing directly writes submicrometer structures on the curved surface.Their permutation and combination allow versatile conformal microfabrication.Finally,robotized hybrid printing is utilized to successfully fabricate a conformal heater and antenna on a spherical surface and a flexible smart sensing skin on a winged model,where the curved circuit,flexible capacitive and piezoelectric sensor arrays,and rigid digital–analog conversion chips are assembled.Robotized hybrid printing is an innovative printing technology,enabling additive,noncontact and digital microfabrication for 3D curved electronics.

Study on curved surface fitting model using GPS and leveling in local area

The height anomaly surface is fitt and the quasi-geoid can be obtained when the height anomaly is determined with the geometric analytic method. Therefore, some mathematical models to fit height anomaly surface using GPS, leveling and terrain data in a local area, including the polynomial fitting model, the multi-surface function fitting model, the motion surface fitting model and the fitting model of little flexibility deformation of thin board, are given. Then the digital characteristics are analyzed with the curved surface theory. The General curvature and the mean curvature of surface are concluded. The advantage, disadvantage and application of the above models are discussed. The effect of terrain undulation on height anomaly is considered in the surface fitting models. The practical case indicates that these models are of validity and practicability. It is concluded that the above models can give the good fitting results at the centimeter level. But the polynomial fitting model is worse than the other models.

Conformal manufacturing of soft deformable sensors on the curved surface

Health monitoring of structures and people requires the integration of sensors and devices on various 3D curvilinear,hierarchically structured,and even dynamically changing surfaces.Therefore,it is highly desirable to explore conformal manufacturing techniques to fabricate and integrate soft deformable devices on complex 3D curvilinear surfaces.Although planar fabrication methods are not directly suitable to manufacture conformal devices on 3D curvilinear surfaces,they can be combined with stretchable structures and the use of transfer printing or assembly methods to enable the device integration on 3D surfaces.Combined with functional nanomaterials,various direct printing and writing methods have also been developed to fabricate conformal electronics on curved surfaces with intimate contact even over a large area.After a brief summary of the recent advancement of the recent conformal manufacturing techniques,we also discuss the challenges and potential opportunities for future development in this burgeoning field of conformal electronics on complex 3D surfaces.

Magnetorheological finishing of low-gradient curved surfaces based on four-axis linkage technique

Based on the distribution characteristic of magnetic field along the polish wheel,the four-axis linkage technique is advanced to replace a standard five-axis one to figure low-gradient optical surfaces with a raster tool-path in magnetorheological finishing(MRF).After introducing the fundaments of such simplification,the figuring reachability of a four-axis system for the low-gradient optics was theoretically analyzed.Further validation including magnetic field intensity and influence function characteristic was performed to establish its application.To demonstrate the correctness,feasibility and applicability of such technique,a K4 spherical part was figured by two iterations of MRF with surface form error improved to 0.219λPV and 0.027λRMS.Meanwhile,the surface roughness was also improved a lot in MRF process.These theoretical analyses and experimental results both indicate that high form accuracy and excellent surface quality can be obtained by using the four-axis linkage technique in the process of figuring low-gradient optical elements,and the four-axis linkage system undoubtedly is much more easy to control and much more economical.

Curved surface effect and emission on silicon nanostructures

The curved surface （CS） effect on nanosilicon plays a main role in the activation for emission and photonic manipulation. The CS effect breaks the symmetrical shape of nanosilicon on which some bonds can produce localized electron states in the band gap. The investigation in calculation and experiment demonstrates that the different curvatures can form the characteristic electron states for some special bonding on the nanosilicon surface, which are related to a series of peaks in photoluminecience （PL）, such as LN, LNO, Lo1, and Lo2 lines in PL spectra due to Si-N, Si-NO, Si=O, and Si-O-Si bonds on curved surface, respectively. Si-Yb bond on curved surface of Si nanostructures can provide the localized states in the band gap deeply and manipulate the emission wavelength into the window of optical communication by the CS effect, which is marked as the Lyb line of electroluminescence （EL） emission.

Residual strain evaluation of curved surface by grating-transferring technique and GPA

This paper investigates an advanced grating-transferring technique combined with geometric phase analysis (GPA) for residual strain evaluation of curved surface.A standard holographic grating is first transferred to a pre-produced epoxy resin film and then consolidated to a test region of curved surface.With a rubber mold and silicone rubber the deformed grating is replicated to a sheet metal after hole-drilling for release of residual stress.After that the grating is transferred from the sheet metal to the glass plate,which would be served as an analyzer grating (specimen grating).By GPA the local strain distributions related to the phase difference between the reference grating and analyzer grating for the released stress can be evaluated.A validation test has been conducted on the weld joint of a stainless steel tube and the obtained results demonstrate the ability of the method in measuring the residual strain of curved surface.

Numerical treatment for Darcy-Forchheimer flow of carbon nanotubes due to an exponentially stretching curved surface

This article gives a numerical report to two dimensional(2D)Darcy-Forchheimer flow of carbon-water nanofluid.Flow is instigated by exponential extending curved surface.Viscous liquid in permeable space is described by Darcy-Forchheimer.The subsequent arrangement of partial differential equations is changed into ordinary differential framework through proper transformations.Numerical arrangements of governing frameworks are set up by NDSolve procedure.Outcomes of different sundry parameters on temperature and velocity are examined.Skin friction and heat transfer rate are also shown and inspected.

Numerical analysis of 3D spot continual induction hardening on curved surface of AISI 1045 steel

In order to investigate and predict the material properties of curved surface AISI 1045 steel component during spot continual induction hardening(SCIH),a 3D model for curved surface workpieces which coupled electromagnetic,temperature and phase transformation fields was built by finite element software ANSYS.A small size inductor and magnetizer were used in this model,which can move along the top surface of workpiece flexibly.The effect of inductor moving velocity and workpiece radius on temperature field was analyzed and the heating delay phenomenon was found through comparing the simulated results.The temperature field results indicate that the heating delay phenomenon is more obvious under high inductor moving velocity condition.This trend becomes more obvious if the workpiece radius becomes larger.The predictions of microstructure and micro-hardness distribution were also carried out via this model.The predicted results show that the inductor moving velocity is the dominated factor for the distribution of 100% martensite region and phase transformation region.The influencing factor of workpiece radius on 100% martensite region and phase transformation region distribution is obvious under relatively high inductor moving velocity but inconspicuous under relatively low inductor moving velocity.

ON CURVED SURFACE APPROXIMATION AND HIDDEN SURFACE ELIMINATION IN 3-D COMPUTER AIDED GARMENT DESIGN

An approximation method for curved surface mannequin and hidden surface eliminationin 3-D computer aided garment design system is described. The mannequin is the basis of the3-D modeling for clothes. In terms of the requirements of computer aided garment design,the authors put forward a method for curved surface approximation in the meaning of leastsquares. Using. this method the computation of geometric modeling is simple andefficient. It is also convenient for curved surface modification and shading.

DIRECTIVITY OPTIMIZATION OF CURVED SURFACE DIPOLE ANTENNAS

Based on the calculation of the characteristic parameters by moment method, the curved surface dipoles are optimized by an optimization method, the maximum directivities of some V-curved and Gauss-curved surface dipoles are given.

Shape gradient and classical gradient of curvatures:driving forces on micro/nano curved surfaces

Recent experiments and molecule dynamics simulations have shown that adhesion droplets on conical surfaces may move spontaneously and directionally. Besides, this spontaneous and directional motion is independent of the hydrophilicity and hydrophobicity of the conical surfaces. Aimed at this important phenomenon, a gen- eral theoretical explanation is provided from the viewpoint of the geometrization of micro/nano mechanics on curved surfaces. In the extrinsic mechanics on micro/nano soft curved surfaces, we disclose that the curvatures and their extrinsic gradients form the driving forces on the curved spaces. This paper focuses on the intrinsic mechanics on micro/nano hard curved surfaces and the experiment on the spontaneous and directional motion. Based on the pair potentials of particles, the interactions between an isolated particle and a micro/nano hard curved surface are studied, and the geometric foundation for the interactions between the particle and the hard curved surface is analyzed. The following results are derived： （a） Whatever the exponents in the pair potentials may be, the potential of the particle/hard curved surface is always of the unified curvature form, i.e., the potential is always a unified function of the mean curvature and the Gaussian curvature of the curved surface. （b） On the basis of the curvature-based potential, the geometrization of the micro/nano mechanics on hard curved surfaces may be realized. （c） Similar to the extrinsic mechanics on micro/nano soft curved surfaces, in the intrinsic mechanics on micro/nano hard curved surfaces, the curvatures and their intrinsic gradi- ents form the driving forces on the curved spaces. In other words, either on soft curved surfaces or hard curved surfaces and either in the extrinsic mechanics or the intrinsic mechanics, the curvatures and their gradients are all essential factors for the driving forces on the curved spaces. （d） The direction of the driving force induced by the hard curved surface is independent of the hydrophilieity and hydrophobicity of the curved surface, explaining the experimental phenomenon of the spontaneous and directional motion.

Research on Planar Development of Curved Surfaces

Development of curved surface is a useful tool in CAD(computer aided design) and CAGD(computer aided geometric design).This paper presents the algorithms for developing (flattening) a smooth continuous curved surface embedded in three dimensional space into a planar shape. First the definition of planar development of a curved surface is presented, and the distortions (at length and area) of development are discussed in this paper. Then several planar flattening methods of curved surface, and their advantages and disadvantages are analyzed in detail. For NURBS(non uniform rational basic spline) surfaces, which are broadly used in CAGD, we put forward a new planar developing algorithm, i.e. hybrid developing, and present the steps of the algorithm. At last, some examples are used to show the effectiveness of the algorithm.

Jeffrey fluid flow due to curved stretching surface with Cattaneo-Christov heat flux

The two-dimensional(2D) motion of the Jeffrey fluid by the curved stretching sheet coiled in a circle is investigated. The non-Fourier heat flux model is used for the heat transfer analysis. Feasible similarity variables are used to transform the highly nonlinear ordinary equations to partial differential equations(PDEs). The homotopy technique is used for the convergence of the velocity and temperature equations. The effects of the involved parameters on the physical properties of the fluid are described graphically.The results show that the curvature parameter is an increasing function of velocity and temperature, and the temperature is a decreasing function of the thermal relaxation time.Besides, the Deborah number has a reverse effect on the pressure and surface drag force.

Schrdinger Equation of a Particle on a Rotating Curved Surface

We derive the Schr6dinger equation of a particle constrained to move on a rotating curved surface S. Using the thin-layer quantization scheme to confine the particle on S, and with a proper choice of gauge transformation for the wave function, we obtain the well-known geometric potentiM Vg and an additive Coriolis-induced geometric potential in the co-rotationM curvilinear coordinates. This novel effective potential, which is included in the surface Schr6dinger equation and is coupled with the mean curvature of S, contains an imaginary part in the general case which gives rise to a non-Hermitian surface Hamiltonian. We find that the non-Hermitian term vanishes when S is a minimal surface or a revolution surface which is axially symmetric around the rolling axis.

A New Dynamics Analysis Model for Five-Axis Machining of Curved Surface Based on Dimension Reduction and Mapping

The equipment used in various fields contains an increasing number of parts with curved surfaces of increasing size.Five-axis computer numerical control(CNC)milling is the main parts machining method,while dynamics analysis has always been a research hotspot.The cutting conditions determined by the cutter axis,tool path,and workpiece geometry are complex and changeable,which has made dynamics research a major challenge.For this reason,this paper introduces the innovative idea of applying dimension reduction and mapping to the five-axis machining of curved surfaces,and proposes an efficient dynamics analysis model.To simplify the research object,the cutter position points along the tool path were discretized into inclined plane five-axis machining.The cutter dip angle and feed deflection angle were used to define the spatial position relationship in five-axis machining.These were then taken as the new base variables to construct an abstract two-dimensional space and establish the mapping relationship between the cutter position point and space point sets to further simplify the dimensions of the research object.Based on the in-cut cutting edge solved by the space limitation method,the dynamics of the inclined plane five-axis machining unit were studied,and the results were uniformly stored in the abstract space to produce a database.Finally,the prediction of the milling force and vibration state along the tool path became a data extraction process that significantly improved efficiency.Two experiments were also conducted which proved the accuracy and efficiency of the proposed dynamics analysis model.This study has great potential for the online synchronization of intelligent machining of large surfaces.

Impact of backwater on water surface profile in curved channels

Owing to extensive construction of dams, the impact of backwater on flow may lead to navigation or flood control issues in curved channels. To date, the impact of backwater on the water surface profile in curved channels remains unknown and requires investigation. In this study, experiments were conducted in a glass-walled recirculating flume with a length of 19.4 m, a width of 0.6 m, and a depth of 0.8 m, and the impact of backwater on the water surface profile in a 90° channel bend was investigated. The experimental results showed that the backwater degree had a significant impact on the transverse and longitudinal flow depth distributions in the bend. The transverse slope of the flow (Jr) increased linearly with an increase in the Froude number of the approach flow upstream of the bend. Jr increased with the longitudinal location parameter ξ when −0.2 < ξ < 0.5, and decreased with ξ when 0.5 < ξ < 1.2. Furthermore, the results showed that Jr asymptotically decreased to zero with an increase in the degree of backwater. An equation was formulated to estimate the transverse slope of the flow in a 90° bend in backwater zones.

CFD study of turbulent jet impingement on curved surface

The heat transfer and flow characteristics of air jet impingement on a curved surface are investigated with computational fluid dynamics(CFD)approach.The first applied model is a one-equation SGS model for large eddy simulation(LES)and the second one is the SST-SAS hybrid RANS-LES.These models are utilized to study the flow physics in impinging process on a curved surface for different jet-to-surface(h/B)distances at two Reynolds numbers namely,2960 and 4740 based on the jet exit velocity(U_e)and the hydraulic diameter(2B).The predictions are compared with the experimental data in the literature and also the results from RANS k-εmodel.Comparisons show that both models can produce relatively good results.However,one-equation model(OEM)produced more accurate results especially at impingement region at lower jet-to-surface distances.In terms of heat transfer,the OEM also predicted better at different jet-to-surface spacings.It is also observed that both models show similar performance at higher h/B ratios.