Rock sheds are widely used to prevent rockfall disasters along roads in mountainous areas.To improve the capacity of rock sheds for resisting rockfall impact,a sand and expandable polyethylene(EPE)composite cushion wa...Rock sheds are widely used to prevent rockfall disasters along roads in mountainous areas.To improve the capacity of rock sheds for resisting rockfall impact,a sand and expandable polyethylene(EPE)composite cushion was proposed.A series of model experiments of rockfall impact on rock sheds were conducted,and the buried depth of the EPE foam board in the sand layer was considered.The impact load and dynamic response of the rock shed were investigated.The results show that the maximum impact load and dynamic response of the rock shed roof are all significantly less than those of the sand cushion.Moreover,as the distance between the EPE foam board and rock shed roof decreases,the maximum rockfall impact force and impact pressure gradually decrease,and the maximum displacement,acceleration and strain of the rock shed first decrease and then change little.In addition,the vibration acceleration and vertical displacement of the rock shed roof decrease from the centre to the edge and decrease faster along the longitudinal direction than that along the transverse direction.In conclusion,the buffering effect of the sand-EPE composite cushion is better than that of the pure sand cushion,and the EPE foam board at a depth of 1/3 the thickness of the sand layer is appropriate.展开更多
Rock shed is an effective protection measure against rockfall.To investigate the influences of falling rock’s shape and impact angle on the impact effect of the cushioned rock shed,a modeling approach for a rock shed...Rock shed is an effective protection measure against rockfall.To investigate the influences of falling rock’s shape and impact angle on the impact effect of the cushioned rock shed,a modeling approach for a rock shed with a cushion layer using PFC-FLAC.The granular cushion is modeled as an aggregate of discrete non-cohesion particles,while the concrete plate and the beam are modeled as zones.The falling rock with different sphericities and impact angles is modeled as a rigid assembly.The numerical model is validated by comparing the simulation results with experimental and numerical results from previous literature.This model is applied to analyze the effects of rock shape and impact angle on the dynamic interaction effects between falling rock and cushioned rock shed,including the impact force,transmitted bottom force,penetration depth,and plate deflection.The numerical results show that the variation in the falling rock’s shape has different effects on the falling rock with different impact angles.These findings could support rock shed design by revealing the limitations of the assumptions in the past research,which may result in unsafe rock sheds for some rockfall cases.展开更多
The shape of rockfalls significantly affects the performance of the impact cushion,which is manifested by the difference in the impact force and the penetration depth of the rockfall during the collision.In this study...The shape of rockfalls significantly affects the performance of the impact cushion,which is manifested by the difference in the impact force and the penetration depth of the rockfall during the collision.In this study,we built the collision numerical model between rockfalls and cushions based on the results from previous studies,and simulated the collision process of rockfalls with four different shapes(cylindrical,cuboid,spherical,and cubic)and different cushions.Essential parameters when rockfalls impact cushions are calculated,including the maximum impact forces on the surface and bottom of the cushions and the maximum penetration depth of the rockfall.The results showed that the maximum impact force on the surface and the bottom of the cushions varies with the rockfall shapes.The maximum impact force on the cushion surface caused by cylindrical rockfall is the smallest,followed by the cuboid rockfall,the cube rockfall,and the spherical rockfall.The maximum impact force at the cushion bottom also follows this trend.However,the penetration depth of cuboid rockfall is the smallest,followed by the cylindrical rockfall,the cubic rockfall,and the spherical rockfall.The results of this study provide more extensive theoretical support for rockfall disaster prevention using gravel cushions.展开更多
基金supported by the Natural Science Foundation of Sichuan Province(No.2022NSFSC1127)the Fundamental Research Funds for the Central Universities(No.2682023CX075).
文摘Rock sheds are widely used to prevent rockfall disasters along roads in mountainous areas.To improve the capacity of rock sheds for resisting rockfall impact,a sand and expandable polyethylene(EPE)composite cushion was proposed.A series of model experiments of rockfall impact on rock sheds were conducted,and the buried depth of the EPE foam board in the sand layer was considered.The impact load and dynamic response of the rock shed were investigated.The results show that the maximum impact load and dynamic response of the rock shed roof are all significantly less than those of the sand cushion.Moreover,as the distance between the EPE foam board and rock shed roof decreases,the maximum rockfall impact force and impact pressure gradually decrease,and the maximum displacement,acceleration and strain of the rock shed first decrease and then change little.In addition,the vibration acceleration and vertical displacement of the rock shed roof decrease from the centre to the edge and decrease faster along the longitudinal direction than that along the transverse direction.In conclusion,the buffering effect of the sand-EPE composite cushion is better than that of the pure sand cushion,and the EPE foam board at a depth of 1/3 the thickness of the sand layer is appropriate.
基金supported by the National Natural Science Foundation of China(Grant Nos.41941017 and U1702241).
文摘Rock shed is an effective protection measure against rockfall.To investigate the influences of falling rock’s shape and impact angle on the impact effect of the cushioned rock shed,a modeling approach for a rock shed with a cushion layer using PFC-FLAC.The granular cushion is modeled as an aggregate of discrete non-cohesion particles,while the concrete plate and the beam are modeled as zones.The falling rock with different sphericities and impact angles is modeled as a rigid assembly.The numerical model is validated by comparing the simulation results with experimental and numerical results from previous literature.This model is applied to analyze the effects of rock shape and impact angle on the dynamic interaction effects between falling rock and cushioned rock shed,including the impact force,transmitted bottom force,penetration depth,and plate deflection.The numerical results show that the variation in the falling rock’s shape has different effects on the falling rock with different impact angles.These findings could support rock shed design by revealing the limitations of the assumptions in the past research,which may result in unsafe rock sheds for some rockfall cases.
基金supported by the National Key Research and Development Program of China(2022YFC3080100)the National Natural Science Foundation of China(Grant No.52104125)+2 种基金opening research fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.SKLGME021009)the Basic Research Program of Guizhou ProvinceZK[2022]General 166opening fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology)(Grant No.SKLGP2022K007)。
文摘The shape of rockfalls significantly affects the performance of the impact cushion,which is manifested by the difference in the impact force and the penetration depth of the rockfall during the collision.In this study,we built the collision numerical model between rockfalls and cushions based on the results from previous studies,and simulated the collision process of rockfalls with four different shapes(cylindrical,cuboid,spherical,and cubic)and different cushions.Essential parameters when rockfalls impact cushions are calculated,including the maximum impact forces on the surface and bottom of the cushions and the maximum penetration depth of the rockfall.The results showed that the maximum impact force on the surface and the bottom of the cushions varies with the rockfall shapes.The maximum impact force on the cushion surface caused by cylindrical rockfall is the smallest,followed by the cuboid rockfall,the cube rockfall,and the spherical rockfall.The maximum impact force at the cushion bottom also follows this trend.However,the penetration depth of cuboid rockfall is the smallest,followed by the cylindrical rockfall,the cubic rockfall,and the spherical rockfall.The results of this study provide more extensive theoretical support for rockfall disaster prevention using gravel cushions.
