Synergistically Toughening Effect of SiC Whiskers and Nanoparticles in Al_2O_3-based Composite Ceramic Cutting Tool Material

In recent decades, many additives with different characteristics have been applied to strengthen and toughen Al2O3-based ceramic cutting tool materials. Among them, SiC whiskers and SiC nanoparticles showed excellent performance in improving the material properties. While no attempts have been made to add SiC whiskers and SiC nanoparticles together into the ceramic matrix and the synergistically toughening effects of them have not been studied. An Al2O3-SiCw-SiC np advanced ceramic cutting tool material is fabricated by adding both one-dimensional SiC whiskers and zero-dimensional SiC nanoparticles into the Al2O3 matrix with an effective dispersing and mixing process. The composites with 25 vol% SiC whiskers and 25 vol% SiC nanoparticles alone are also investegated for comparison purposes. Results show that the Al2O3-SiCw-SiCnp composite with both 20 vo1% SiC whiskers and 5 vol% SiC nanoparticles additives have much improved mechanical properties. The flexural strength of Al2O3-SiCw-SiCnp is 730＋ 95 MPa and fracture toughness is 5.6 ± 0.6 MPa.m1/2. The toughening and strengthening mechanisms of SiC whiskers and nanoparticles are studied when they are added either individually or in combination. It is indicated that when SiC whiskers and nanoparticles are added together, the grains are further refined and homogenized, so that the microstructure and fracture mode ratio is modified. The SiC nanoparticles are found helpful to enhance the toughening effects of the SiC whiskers. The proposed research helps to enrich the types of ceramic cutting tool and is benefit to expand the application range of ceramic cutting tool.

Cooling and Crack Suppression of Bone Material Drilling Based on Microtextured Bit Modeled on Dung Beetle

In recent years,the number of patients with orthopedic diseases such as cervical spondylosis has increased,resulting in an increase in the demand for orthopedic surgery.However,thermal necrosis and bone cracks caused by surgery severely restrict the development and progression of orthopedic surgery.For the material of cutting tool processing bone in bone surgery of drilling high temperature lead to cell death,easy to produce the problem such as crack cause secondary damage effects to restore,in this paper,a bionic drill was designed based on the micro-structure of the dung beetle's head and back.The microstructure configuration parameters were optimized by numerical analysis,and making use of the optical fiber laser marking machine preparation of bionic bit;through drilling test,the mathematical model of drilling temperature and crack generation based on micro-structure characteristic parameters was established by infrared thermal imaging technology and acoustic emission signal technology,and the cooling mechanism and crack suppression strategy were studied.The experimental results show that when the speed is 60 m/min,the cooling effects of the bionic bit T1 and T2 are 15.31%and 19.78%,respectively,and both kinds of bits show obvious crack suppression effect.The research in this paper provides a new idea for precision and efficient machining of bone materials,and the research results will help to improve the design and manufacturing technology and theoretical research level in the field of bone drilling tools.

MULTI-SCALE AND MULTI-PHASE NANOCOMPOSITE CERAMIC TOOLS AND CUTTING PERFORMANCE

An advanced ceramic cutting tool material Al2O3/TiC/TiN （LTN） is developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix. With the optimal dispersing and fabricating technology, this multi-scale and multi-phase nanocomposite ceramic tool material can get both higher flexural strength and fracture toughness than that of A1203/TiC （LZ） ceramic tool material without nano-scale TiN particle, especially the fracture toughness can reach to 7.8 MPa . m^0.5. The nano-scale TiN can lead to the grain fining effect and promote the sintering process to get a higher density. The coexisting transgranular and intergranular fracture mode induced by micro-scale TiC and nano-scale TiN, and the homogeneous and densified microstructure can result in a remarkable strengthening and toughening effect. The cutting performance and wear mechanisms of the advanced multi-scale and multi-phase nanocomposite ceramic cutting tool are researched.

Development of Diamond-like Carbon Fibre Wheel

A unique diamond-like carbon (DLC) grinding wheel was developed, in which the DLC fibres were made by rolling Al sheets coated with DLC films and aligned no rmally to the grinding wheel surface by laminating Al sheets together with DLC fibres. In this paper, the formation process of DLC fibres and the fabrication process of a DLC fibre wheel were investigated. Many grinding experiments were also carried out on a precision NC plane milling machine using a newly developed DLC wheel. Grinding of specimens of silicon wafers, optical glasses, quartz, granites and hardened die steel SKD11 demonstrated the capabilities of nanometer surface finish. A smooth surface with a roughness value of Ra2.5 nm (Ry26 nm) was achieved.

Metal-Ceramic Smart Composite in Ti(C,N)-Ni-Mo-W System

Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sintering in vacuum furnace at 1600°C under 10-3 Pa pressure. Phase analysis was performed on X-ray apparatus “DRON-3”;microstructure was determined by electron microscope NANOLAB-7, microhardness by MUCKE-mark microhardness meter;relative resistance of cutters was evaluated at similar modes of cutting according to distances they passed;experiments were carried out on turning lathe. Results: Physical-mechanical characteristics of the obtained composite are: σbend, = 1000 - 1150 MPa, σbend1000°C = 600 MPa, HV = 14 GPa;HV1000°C = 6.5 GPa. High speeds of cutting and high temperatures resistance of cutters made by the obtained composites exceeds 1.5 - 2-folds that of cutters made of the known BK8 and KNT20 hard alloys. Conclusion: Its application is recommended in hot steel treatment by cutting, for removal of the so-called burrs, as well as in steel treatment by cutting during pure and semi-pure operations. It can also be used in jet engines, chemical industry apparatuses, electric-vacuum devices, in industry of responsible details of rockets, nuclear reactors, flying apparatuses.

Experimental Study on Application of Shaped Charge to Rock Materials Cutting

The mechanic affection on the blast holewalls is simply analyzed and cracking propaga-tion caused by shaped charge is explained inthis paper. In the rock materials cutting, pri-