Diameter frequency distribution in a specific stand provides basic information for forest resources management. In this study, four probability models were applied to analyze diameter distribution of natural forests a...Diameter frequency distribution in a specific stand provides basic information for forest resources management. In this study, four probability models were applied to analyze diameter distribution of natural forests after selective cutting with different intensities （low intensity of 13.0% in volume, medium intensity of 29.1%, high intensity of 45.8%, and extra-high intensity of 67.1%） The results show that the skewness and kurtosis of the four models are positive except that of low intensity selective cutting, which suggest that the number of small-size trees dominate the stand. The more intensity of selective cutting, the wider range of diameter distributions. The diameter structure of selective cutting with low intensity met Weibull and Beta distributions; that of medium intensity met Weibull, negative exponential as well as Gamma distributions; that of high intensity cutting met Weibull and negative exponential distributions, but that of extra-high intensity could not meet any above model. Weibull distribution model fits better than others regarding the structure of diameter distribution in natural forests managed on polycyclic cutting system. The results will provide basic information for sustainable management for mixed natural stands managed on a polycyclic cutting system.展开更多
The temperature distribution in the tool, chip and workpiece was studied during the orthogonal cuttingprocess Under several different cutting conditions. The temperature distribution is calculated by the finite differ...The temperature distribution in the tool, chip and workpiece was studied during the orthogonal cuttingprocess Under several different cutting conditions. The temperature distribution is calculated by the finite differencemethod. and the variation of the material properties with temperature was taken was taken into account The results obtained arecoincident with both previous published results and experimental measurements.展开更多
This paper characterizes the rarely noticeable hot-cutting defect and statistically models the fracture governed by this new type defect. The morphology of the defect on fired ceramic is examined and quantitatively fe...This paper characterizes the rarely noticeable hot-cutting defect and statistically models the fracture governed by this new type defect. The morphology of the defect on fired ceramic is examined and quantitatively featured through comparing the fracture strength governed by intrinsic defect and hot-cutting defect. Weibull distribution is utilized to fit the observed strength data and chi-square goodness-of-fit test is conducted to analyze the deviation. Kernel density estimation is introduced to explore the underlying strength distribution dominated by hot-cutting defect. Based on the shape information from kernel density estimating,gamma and lognormal distribution are compared and the hot-cutting defect governing fracture statistics is finally confirmed by chisquare test. Results show that the newly-defined hot-cutting defect is more dangerous than the intrinsic defect and the priori Weibull distribution fails to describe the fracture statistic governed by the edge defect while the lognormal with a slightly right skewed shape fits it very well.展开更多
Severely deformed coal seams barely deliver satisfactory gas production. This research was undertaken to develop a new method to predict the positions of deformed coals for a horizontal CBM well. Firstly, the drilling...Severely deformed coal seams barely deliver satisfactory gas production. This research was undertaken to develop a new method to predict the positions of deformed coals for a horizontal CBM well. Firstly, the drilling cuttings of different structure coals were collected from a coal mine and compared. In light of the varying cuttings characteristics for different structure coals, the coal structure of the horizontally drilled coal seam was predicted. And the feasibility of this prediction method was discussed. The result shows that exogenetic fractures have an important influence on the deformation of coal seams. The hardness coefficient of coal decreases with the deformation degree in the order of primary structural, cataclastic and fragmented coal. And the expanding-ratio of gas drainage holes and the average particle size of cuttings increase with the increase of the deformation degree. The particle size distribution of coal cuttings for the three types of coals is distinctive from each other. Based on the particle size distribution of cuttings from X-2 well in a coal seam, six sections of fragmented coal which are unsuitable for perforating are predicted. This method may benefit the optimization of perforation and fracturing of a horizontal CBM well in the study area.展开更多
The concept of cutting platform is proposed and realized based on the latest two step automated tape laying (Two step ATL)technology,which separates prepreg cutting process from tape laying to improve productivity for...The concept of cutting platform is proposed and realized based on the latest two step automated tape laying (Two step ATL)technology,which separates prepreg cutting process from tape laying to improve productivity for large parts with small features.Two step ATL is more efficient than conventional layup because ply patches are pre cut in a separate operation.The concept of the prepreg tape cutting experimental platform with two cutters is introduced.Further,based on the automatic tape laying trajectory planning software,a two cutter cutting algorithm is proposed.Cutting experiments are reported to validate both the concept of cutting platform and cutting algorithm.展开更多
The influence of fuzzy uncertainty factors is considered on the analysis of chatter occurring during machine tool cutting process. Using fuzzy mathematics analysis methods, a detailed discussion over fuzzy stability a...The influence of fuzzy uncertainty factors is considered on the analysis of chatter occurring during machine tool cutting process. Using fuzzy mathematics analysis methods, a detailed discussion over fuzzy stability analysis problems is presented related to the mode coupling chatter with respect to intrinsic structure fuzzy factors, and the possibility distribution of the fuzzy stability cutting range and the confidence level expressions of the fuzzy stability cutting width are given.展开更多
基金supported by the National Natural Sci-ence Foundation of China (Grant No. 30972359)the Natural Science Foundation of Fujian Provinceince (No. 2008J0327, 2009J01232)
文摘Diameter frequency distribution in a specific stand provides basic information for forest resources management. In this study, four probability models were applied to analyze diameter distribution of natural forests after selective cutting with different intensities （low intensity of 13.0% in volume, medium intensity of 29.1%, high intensity of 45.8%, and extra-high intensity of 67.1%） The results show that the skewness and kurtosis of the four models are positive except that of low intensity selective cutting, which suggest that the number of small-size trees dominate the stand. The more intensity of selective cutting, the wider range of diameter distributions. The diameter structure of selective cutting with low intensity met Weibull and Beta distributions; that of medium intensity met Weibull, negative exponential as well as Gamma distributions; that of high intensity cutting met Weibull and negative exponential distributions, but that of extra-high intensity could not meet any above model. Weibull distribution model fits better than others regarding the structure of diameter distribution in natural forests managed on polycyclic cutting system. The results will provide basic information for sustainable management for mixed natural stands managed on a polycyclic cutting system.
文摘The temperature distribution in the tool, chip and workpiece was studied during the orthogonal cuttingprocess Under several different cutting conditions. The temperature distribution is calculated by the finite differencemethod. and the variation of the material properties with temperature was taken was taken into account The results obtained arecoincident with both previous published results and experimental measurements.
文摘This paper characterizes the rarely noticeable hot-cutting defect and statistically models the fracture governed by this new type defect. The morphology of the defect on fired ceramic is examined and quantitatively featured through comparing the fracture strength governed by intrinsic defect and hot-cutting defect. Weibull distribution is utilized to fit the observed strength data and chi-square goodness-of-fit test is conducted to analyze the deviation. Kernel density estimation is introduced to explore the underlying strength distribution dominated by hot-cutting defect. Based on the shape information from kernel density estimating,gamma and lognormal distribution are compared and the hot-cutting defect governing fracture statistics is finally confirmed by chisquare test. Results show that the newly-defined hot-cutting defect is more dangerous than the intrinsic defect and the priori Weibull distribution fails to describe the fracture statistic governed by the edge defect while the lognormal with a slightly right skewed shape fits it very well.
基金funded by National Science and Technology Major Project of China (No. 2016ZX05067001-007)Shanxi Coalbased Scientific and Technological Key Project of China (No. MQ2014-04)+1 种基金Shanxi Provincial Basic Research Program-Coal Bed Methane Joint Research Foundation (No. 2015012014)Opening Foundation of Key Laboratory of Tectonics and Petroleum Resources (China University of Geosciences) Ministry of Education (No. TPR-2017-18)
文摘Severely deformed coal seams barely deliver satisfactory gas production. This research was undertaken to develop a new method to predict the positions of deformed coals for a horizontal CBM well. Firstly, the drilling cuttings of different structure coals were collected from a coal mine and compared. In light of the varying cuttings characteristics for different structure coals, the coal structure of the horizontally drilled coal seam was predicted. And the feasibility of this prediction method was discussed. The result shows that exogenetic fractures have an important influence on the deformation of coal seams. The hardness coefficient of coal decreases with the deformation degree in the order of primary structural, cataclastic and fragmented coal. And the expanding-ratio of gas drainage holes and the average particle size of cuttings increase with the increase of the deformation degree. The particle size distribution of coal cuttings for the three types of coals is distinctive from each other. Based on the particle size distribution of cuttings from X-2 well in a coal seam, six sections of fragmented coal which are unsuitable for perforating are predicted. This method may benefit the optimization of perforation and fracturing of a horizontal CBM well in the study area.
基金supported by the National Science and Technology Major Project(No.2016ZX04002-005)
文摘The concept of cutting platform is proposed and realized based on the latest two step automated tape laying (Two step ATL)technology,which separates prepreg cutting process from tape laying to improve productivity for large parts with small features.Two step ATL is more efficient than conventional layup because ply patches are pre cut in a separate operation.The concept of the prepreg tape cutting experimental platform with two cutters is introduced.Further,based on the automatic tape laying trajectory planning software,a two cutter cutting algorithm is proposed.Cutting experiments are reported to validate both the concept of cutting platform and cutting algorithm.
文摘The influence of fuzzy uncertainty factors is considered on the analysis of chatter occurring during machine tool cutting process. Using fuzzy mathematics analysis methods, a detailed discussion over fuzzy stability analysis problems is presented related to the mode coupling chatter with respect to intrinsic structure fuzzy factors, and the possibility distribution of the fuzzy stability cutting range and the confidence level expressions of the fuzzy stability cutting width are given.
