Based on experiments in lab, this paper analyzes the mechanism of directional broken controlled blasting and applies the technology to the cutting by utilizing its characteristic. The model cutting experiment and the ...Based on experiments in lab, this paper analyzes the mechanism of directional broken controlled blasting and applies the technology to the cutting by utilizing its characteristic. The model cutting experiment and the practical application result show that the cutting blasting technology is an effective way.展开更多
In this paper the CNC machining of St52 was modeled using an artificial neural network(ANN)in the form of a four-layer multi-layer perceptron(MLP).The cutting parameters used in the model were cutting fluid flow,feed ...In this paper the CNC machining of St52 was modeled using an artificial neural network(ANN)in the form of a four-layer multi-layer perceptron(MLP).The cutting parameters used in the model were cutting fluid flow,feed rate,spindle speed and the depth of cut and the model output was the tool life.For obtaining more accuracy and spending less time Taguchi design of experiment(DOE)has been used and correlation between the output of the ANN and the experimental results was 96%.Further optimization process has been done by use of a genetic algorithm(GA).After optimization process tool life was increased about 8%equal to 33 min and was corroborated by experimental tests.This demonstrates that the coupling of an ANN with the GA optimization technique is a valid and useful approach to use.展开更多
该文设计了一种低雷达散射截面（RCS）的宽带磁电偶极子贴片天线,其中印刷在介质板上的金属贴片为电偶极子,3个金属过孔连接辐射贴片与金属地板构成磁偶极子。整个天线采用＂T＂型渐变馈电结构同时激励电偶极子与磁偶极子,天线的频带范...该文设计了一种低雷达散射截面（RCS）的宽带磁电偶极子贴片天线,其中印刷在介质板上的金属贴片为电偶极子,3个金属过孔连接辐射贴片与金属地板构成磁偶极子。整个天线采用＂T＂型渐变馈电结构同时激励电偶极子与磁偶极子,天线的频带范围为7.81~13.65 GHz,覆盖了整个X波段。实测和仿真结果表明,通过在磁电偶极子贴片天线底面采用开槽技术并优化开槽的形状、大小、位置等变量,在天线工作频带范围内实现了RCS的减缩,最大缩减量达到了17.9 d B,同时天线保持了增益稳定不变,E面、H面方向图一致的特性。展开更多
文摘Based on experiments in lab, this paper analyzes the mechanism of directional broken controlled blasting and applies the technology to the cutting by utilizing its characteristic. The model cutting experiment and the practical application result show that the cutting blasting technology is an effective way.
文摘In this paper the CNC machining of St52 was modeled using an artificial neural network(ANN)in the form of a four-layer multi-layer perceptron(MLP).The cutting parameters used in the model were cutting fluid flow,feed rate,spindle speed and the depth of cut and the model output was the tool life.For obtaining more accuracy and spending less time Taguchi design of experiment(DOE)has been used and correlation between the output of the ANN and the experimental results was 96%.Further optimization process has been done by use of a genetic algorithm(GA).After optimization process tool life was increased about 8%equal to 33 min and was corroborated by experimental tests.This demonstrates that the coupling of an ANN with the GA optimization technique is a valid and useful approach to use.
文摘该文设计了一种低雷达散射截面（RCS）的宽带磁电偶极子贴片天线,其中印刷在介质板上的金属贴片为电偶极子,3个金属过孔连接辐射贴片与金属地板构成磁偶极子。整个天线采用＂T＂型渐变馈电结构同时激励电偶极子与磁偶极子,天线的频带范围为7.81~13.65 GHz,覆盖了整个X波段。实测和仿真结果表明,通过在磁电偶极子贴片天线底面采用开槽技术并优化开槽的形状、大小、位置等变量,在天线工作频带范围内实现了RCS的减缩,最大缩减量达到了17.9 d B,同时天线保持了增益稳定不变,E面、H面方向图一致的特性。
