Research on the Mechanism and Strategy of Equity Investment Driving the Transformation of New Material Innovation Achievements

Under the wave of global technological revolution,the new materials industry is facing difficulties in innovation and transformation.Equity investment has become a key driving force due to its flexible mechanism,risk sharing,and deep participation.Based on introducing the current development status of China’s new materials industry,this article reveals the mechanism of equity investment in financial support,risk management,incentive constraints,and resource integration.The article proposes optimization strategies,such as building an information-sharing mechanism and a diversified investment fund system,to promote the high-quality development of the new materials industry driven by innovation and provide strategic guidance for policymakers,investors,and enterprises.

Application of Environment-Friendly Building Materials in the New Countryside

Due to the high cost of environment-friendly materials and limited funds for the new countryside construction,it is the principal contradiction in the application of environment-friendly materials to satisfy the demands of both environment protection and cost reduction.The authors proposed that the influence ranking of these materials on environment should be clarified first to settle this contradiction,that is,to choose energy-conserving and environment-friendly materials within the limit of expenditure.By comparing the energy consumption,shock resistance,economic efficiency and social acceptability of wall materials,the influence ranking was given as below:hollow concrete block < lime-sand brick < baked chamotte brick;by analyzing the advantages and disadvantages of floor and roof concrete materials,as well as attentions for reducing negative impacts,the order of their influence was given as below:precast concrete trough plate < precast hollow strength concrete plate < cast-in-place concrete plate < cast-in-place brick-concrete plate;suitable materials for door and window frameworks were concluded,the influence order of wall and floor decoration materials on environment was given as:bare walls without plastering < walls of stable soil plastering < walls of cement-water plastering < walls of lime plastering;concrete for the overall decoration < parquet floor < tile floor < terrazzo floor;and 7 heat retardation materials were suggested for the construction of new countryside.

Characterization of Elastic Modulus of Granular Materials in a New Designed Uniaxial Oedometric System

A simple uniaxial oedometric system is developed to test the elastic modulus of granular materials. The stress- strain relationship is first measured under conditions of uniaxial compression with additional lateral stress and strain, then the elastic modulus of the material is determined by the linear fitting method. It is found that the modulus is positively correlated to the grain size and negatively correlated to the container size. Arching and dragging are revealed to be the mechanism of such correlations by using the digital image correlation method and the pressure film technology based on the statistical method.

Critical Materials Institute develops new acid-free magnet recycling process

A new rare-earth magnet recycling process developed by researchers at the Critical Materials Institute (CMI) dissolves magnets in an acid-free solution and recovers high purity rare earth elements. For shredded magnet-containing electronic wastes, the process does not require pre-processing such as pre-sorting or demagnetization of the electronic waste.

Jiangsu Jingxin New Materials Co.,Ltd

Jiangsu Jingxin New Materials Co.,Ltd.(former JiangSu Jingxin High Temperature Materials Co.,Ltd.)was founded 36 years ago and has developed into a national high and new technology enterprise,and has been specialized in production of series of high temperature synthetic materials which are favored by world well-known companies like Vesuvius and Kurasaki etc.

Pyrolysis of furfural-acetone resin as matrix precursor for new carbon materials

In order to increase the understanding of the pyrolysis mechanism, Fourier transform infrared spectroscopy (FT-IR) and thermogravimetry-mass spectrometric coupling technique (TG-MS) were used to study the pyrolysis behavior of furfural-acetone resin used for new carbon materials. The curing and carbonization mechanisms of furfural-acetone resin were mainly investigated; structural changes and volatile products evolved during pyrolysis were analyzed. The results indicate that, during pyrolysis of furfural-acetone resin adding 7% (mass fraction) phosphorous acid as curing agent, the rupture of C—O bond in the five-membered heterocycle firstly takes place to release oxygen atoms and then does the C—H bond, which enable the molecular chain to cross-link and condense, then lead to the formation of three dimensional networking structure. With the increase of pyrolyzing temperature, the scission of methyl and the opening of furan ring are generated. As a result, the recomposition of molecular chain structure is generated and a hexatomic fused ring containing double bonds is built. The main volatile products during pyrolysis of furfural- acetone resin are H2O, and a small mount of CO, CO2 and CH4. At elevated temperatures, dehydrogenation takes place and hydrogen gas is evolved.

NEW ORGANIC NONLINEAR OPTICAL MATERIALS OF CINNAMYLIDENE-ACETOPHENONE DERIVATIVES

we have synthesised a series of new optically nonlinear organic materials of cinnamylidene-acetophenone derivatives which have large nonl inear optical susceptibilities and short cut-off wavelengths.

Preparation of Single Crystals of Co_xZn_(1-x)S and Co_xZn_(1-x)Se—New Materials of Dilute Magnetic Semiconductors

In this paper, we report the growth of single crystals of Co_x Zn_(1-x)S and Co_x Zn_(1-x)Se (0<x<0.3) by the method of chemical transport, using iodine as a transport agent. The light green color of single crystal Co_xZn_(1-x)S as well as the light brown color of Co_xZn_(1-x)Se become deep with an increase in x. The compositions of the single crystals were nearly stoichiometric. The transfer rate decreases with an increase of the x value. The growth rate was related to the temperature difference. The large temperature difference speed up the growth rate, but the size of crystal obtained was small. In general, the optimal temperature difference was 15℃. From X-ray diffraction measurements, the structures of crystals Co_xZn_(1-x)S and Co_xZn_(1-x)Se (0<x<0.1) were identified to be zinc blende structure similar to that of ZnS and ZnSe.

A New Type of Multielements-Doped,Carbon-based Materials Characterized by High-thermoconductiv-ity,Low Chemical Sputtering,Low RES Yield and Exposure to Plasma

Low-Z materials, such as carbon-based materials and Be, are major plasma-facing material (PFM) for current, even in future fusion devices. In this paper, a new type of multielement-doped carbon-based materials developed are presented along with experimental re-sults of their properties. The results indicate a decrease in chemical sputtering yield by one order of magnitude, a decrease in both thermal shock resistance and radiation-enhanced sublimation, an evidently lower temperature desorption spectrum, and combined properties of exposing to plasma.

Application of Power Electronics Converters in Renewable Energy

Against the backdrop of global energy shortages and increasingly severe environmental pollution,renewable energy is gradually becoming a significant direction for future energy development.Power electronics converters,as the core technology for energy conversion and control,play a crucial role in enhancing the efficiency and stability of renewable energy systems.This paper explores the basic principles and functions of power electronics converters and their specific applications in photovoltaic power generation,wind power generation,and energy storage systems.Additionally,it analyzes the current innovations in high-efficiency energy conversion,multilevel conversion technology,and the application of new materials and devices.By studying these technologies,the aim is to promote the widespread application of power electronics converters in renewable energy systems and provide theoretical and technical support for achieving sustainable energy development.

Special Issue on New Concepts and Advances in Photocatalytic Materials for Sustainable Energy

The use of solar energy to drive the chemical and energy processes,and the chemical storage of solar energy are the key elements to move to a low-carbon economy,sustainable society and to foster energy transition.For this reason,there is a fast-growing scientific interest on this subject,which is part of the general effort for a solar-driven chemistry and energy,the chemistry of the future.To realize this

Shanghai San Ai Fu New Materials Company,Ltd

Ascientific research institute that was formerly supported financially by the state under the past organizational system has now become a holding company. Its stocks are available on the market and have broken from the conventional planning economic mode and developed into a famous leading economic entity that integrates trade with scientific research and industry. It is regarded as a strong successor in

The Course Reform and Internet Teaching of New Inorganic Materials

With the continuous demand of material performance,the development of materials is rapid,and the professional curriculum teaching of“new inorganic materials”as well as its teaching methods related to the internet mandate a reform,in order to meet the needs of innovative high-quality personnel training.The update and optimization of the teaching content and methods assisted by the internet meet the needs of modern teaching and research work.More than 90%of students believe that internet teaching is conducive to the understanding of classroom knowledge and the development of innovative projects.

Creating new middle breeding materials by utilizing new techniques

A new breeding program"Creating new middle breedingmaterials by utilizing new techniques",cooperated byChina National Rice Research Institute (CNRRI)andJapan International Research Center for Agricultural Sci-ence(JIRCAS)",started in Hangzhou,China in 1999.

A Bottom-up Strategy to Prepare New Carbon Rich Materials

Energy is the key to our future.Whether to the production,storage or use of energy,carbon materials could provide a good solution.They are closely related to people’s daily life and regarded as one of the most promising candidates for the flexible electrodes in energy storage devices.Recently,a research team from the Qingdao Institute of Bioenergy and Bioprocess Technology,Chinese Academy of Sciences prepared a

Combinatorial Discovery and Optimization of New Materials

The concept of the combinatorial discovery and optimization of new materials, and its background,importance, and application, as well as its current status in the world, are briefly reviewed in this paper.

AN INDEFATIGABLE EXPLORER OF NEW MATERIALS ——Some notes on solid physicist Ye Hengqiang

Prof.Ye Hengqiang is a pioneer in China,probing the atomic imagery of solids.He has been engaged in this field for more than a decade and attained a series of important results. His work advances the theory and related techniques when he explores the fine structures of materials on the atomic scale,contributing much to the development of new materials with the aid of electron metalloscopy. In 1963, Ye graduated from the Beijing College of Iron & Steel and was admitted as a post-graduate to the tutelage of Prof.Guo Kexin,a renowned Chinese metal-

Shanghai Genius New Materials R&D Inc.

Shanghai Genius New Materials R&D Inc. is a business entity aimed at the development of the Chinese industry specializing in plastic manufacture. The firm is exclusively engaged in research, development and industrialization of engineering plastics and plastics-made products. During recent years, it has won scores of honorary titles and prizes granted by the national and municipal administrations. By reliance on S&T development, the company makes its way into the market and establishes rewarding ties with many influential clients and business partners by taking advantage of its powerful technical strength and flawless reputation with the public. During succeeding years of the past, it was honoured as a pace-setter among hi-tech undertakings in the Shanghai Municipality. Now, it has grown into one of the brand-new and modernized enterprises with a business group beginning to take shape under its sponsorship. The company has undertaken a dozen State-sponsored and municipal R&D projects and succeeded in

New materials,New momentum & New trends

The world New Fiber Materials Forum ＆ the 23rd China International Man-made Fiber Conference Xiaoshan 2017）China is faced with external and internal development pressures,where the world economy is gestating depth adjustment to accelerate the upgrade of manufacturing industry,while China＇s economy has entered the new normal to promote the supply-side structural reform.

Innovation Union of New Textile Materials coming into shape The 13th(Hangzhou) Tanboocel Union Conference held in Xiaoshan

January 10th-12th marked the opening of The13th（Hangzhou）Tanboocel Union Conference themed on＂Green,Innovation,Intelligent and Win-win＂.Directed by China National Textile and Apparel Council（CNTAC）and sponsored by China Tanboocel Union,