Parameter estimation method for a linear frequency modulation signal with a Duffing oscillator based on frequency periodicity

In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter estimation method for LFM signals with a Duffing oscillator based on frequency periodicity is proposed in this paper.This method utilizes the characteristic that the output signal of the Duffing oscillator excited by the LFM signal changes periodically with frequency,and the modulation period of the LFM signal is estimated by autocorrelation processing of the output signal of the Duffing oscillator.On this basis,the corresponding relationship between the reference frequency of the frequencyaligned Duffing oscillator and the frequency range of the LFM signal is analyzed by the periodic power spectrum method,and the frequency information of the LFM signal is determined.Simulation results show that this method can achieve high-accuracy parameter estimation for LFM signals at an SNR of-25 dB.

Carrier frequency and symbol rate estimation based on cyclic spectrum

Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.With the development of wireless communication,the signal transmission environment has become increasingly bad,causing more difficulties in parameter estimation.It is well known that the signal cycle spectrum is robust to noises and signal parameters are closely related.In practice,it is impossible to calculate the cyclic spectrum of infinite length data signals.When using finite length data to obtain a cycle spectrum,the truncation noise is induced,resulting in interference.It is necessary to overcome the influence of noises in order to improve the detection ability of discrete spectral lines.An improved method of the discrete spectral line extraction algorithm is proposed by reflecting the amplitude advantage of discrete spectral lines through salient features of continuous noises in discrete spectral line neighborhood.

Chirp-Rate Resolution of Fractional Fourier Transform in Multi-component LFM Signal

Distinguishing close chirp-rates of different linear frequency modulation （LFM） signals under concentrated and complicated signal environment was studied. Firstly, detection and parameter estimation of multi-component LFM signal were used by discrete fast fractional Fourier transform （FrFT）. Then the expression of chirp-rate resolution in fractional Fourier domain （FrFD） was deduced from discrete normalize time-frequency distribution, when multi-component LFM signal had only one center frequency. Furthermore, the detail influence of the sampling time, sampling frequency and chirp-rate upon the resolution was analyzed by partial differential equation. Simulation results and analysis indicate that increasing the sampling time can enhance the resolution, but the influence of the sampling frequency can he omitted. What＇s more, in multi-component LFM signal, the chirp-rate resolution of FrFT is no less than a minimal value, and it mainly dependent on the biggest value of chirp-rates, with which it has an approximately positive exponential relationship.

Wigner-Hough transform based on slice's entropy and its application to multi-LFM signal detection

To enhance the capacity of the radar-reconnaissance interception receiver recognizing linear frequency modulated (LFM) at a low signal-noise ratio, this paper presents WignerHough transform (WHT) of the LFM signal and its corresponding characteristics, derives the probability density functions of the LFM signal and Gaussian white noise within WHT based on entropy (WHTE), dimension under different assumptions and puts forward a WHT algorithm based on entropy of slice to improve the capacity of detecting the LFM signal. Entropy of the WHT domain slice is adopted to assess the information size of polar radius or angle slice, which is converted into the weight factor to weight every slice. Double-deck weight is used to weaken the influences of noise and disturbance terms and WHTE treatment and signal detection procedure are also summarized. The rationality of the algorithm is demonstrated through theoretical analysis and formula derivation, the efficiency of the algorithm is verified by simulation comparison between WHT, fractional Fourier transform and periodic WHT, and it is highlighted that the WHTE algorithm has better detection accuracy and range of application against strong noise background.

Combining Radon-ambiguity transform with second-order difference to improve detection probability of LFM signals in low SNR

The Radon-ambiguity transform （RAT）, although efficient for detecting the linear frequency modulated signals （LFMs）, is troubled by the energy accumulation of noise in low signal-to-noise ratio （SNR）. A secondorder difference （SOD） method is proposed to treat with this problem. In the SOD method, the optimal search step and difference step are derived from the LFM rate resolution formula. The sharpness of the peaks of RAT is measured by curvature, and the sharpness, but not the magnitude of the peaks, is used to detect the LFMs. The SOD method removes the noise energy accumulation and reserves the drastically changing components integrally; thus, it improves the detection probability of LFMs in low SNR. The expected performance of the new method is verified by 100 Monte Carlo simulations.

ALGORITHM FOR THE DETECTION AND PARAMETER ESTIMATION OF MULTICOMPONENT LFM SIGNALS

A novel algorithm based on Radon-Ambiguity Transform (RAT) and Adaptive Signal Decomposition (ASD) is presented for the detection and parameter estimation of multicompo-nent Linear Frequency Modulated (LFM) signals. The key problem lies in the chirplet estimation. Genetic algorithm is employed to search for the optimization parameter of chirplet. High estimation accuracy can be obtained even at low Signal-to-Noisc Ratio(SNR). Finally simulation results are provided to demonstrate the performance of the proposed algorithm.

Statistical performance of IF estimation of LFM signals with timevarying amplitude using the peak of WVD

The instantaneous frequency （IF） estimation of the linear frequency modulated （LFM） signals with time-varying amplitude using the peak of the Wigner-Ville distribution （WVD） is studied. Theoretical analysis shows that the estimation on LFM signals with time-varying amplitude is unbiased, only if WVD of time-varying amplitude reaches its maximum at frequency zero no matter in which time. The statistical performance in the case of additive white Guassian noise is evaluated and an analytical expression for the variance is provided. The simulations using LFM signals with Gaussian envelope testify that IF can be estimated accurately using the peak of WVD for four models of amplitude variation. Furthermore the statistical result of estimation on the signals with amplitude descending before rising is better than that of the signals with constant amplitude when the amplitude variation rate is moderate.

HIGH RESOLUTION RANGE PROFILE FORMATION BASED ON LFM SIGNAL FUSION OF MULTIPLE RADARS

This paper presents a new method of High Resolution Range (HRR) profile formation based on Linear Frequency Modulation (LFM) signal fusion of multiple radars with multiple frequency bands. The principle of the multiple radars signal fusion improving the range resolution is analyzed. With the analysis of return signals received by two radars,it is derived that the phase difference between the echoes varies almost linearly with respect to the frequency if the distance between two radars is neg-ligible compared with the radar observation distance. To compensate the phase difference,an en-tropy-minimization principle based compensation algorithm is proposed. During the fusion process,the B-splines interpolation method is applied to resample the signals for Fourier transform imaging. The theoretical analysis and simulations results show the proposed method can effectively increase signal bandwidth and provide a high resolution range profile.

Parameter estimation of LFM signals based on time reversal

In this paper,parameter estimation of linear frequency modulation(LFM)signals containing additive white Gaussian noise is studied.Because the center frequency estimation of an LFM signal is affected by the error propagation effect,resulting in a higher signal to noise ratio(SNR)threshold,a parameter estimation method for LFM signals based on time reversal is proposed.The proposed method avoids SNR loss in the process of estimating the frequency,thus reducing the SNR threshold.The simulation results show that the threshold is reduced by 5 dB compared with the discrete polynomial transform(DPT)method,and the root-mean-square error(RMSE)of the proposed estimator is close to the Cramer-Rao lower bound(CRLB).

Generalized Parseval’s Theorem on Fractional Fourier Transform for Discrete Signals and Filtering of LFM Signals

This paper investigates the generalized Parseval’s theorem of fractional Fourier transform (FRFT) for concentrated data. Also, in the framework of multiple FRFT domains, Parseval’s theorem reduces to an inequality with lower and upper bounds associated with FRFT parameters, named as generalized Parseval’s theorem by us. These results theoretically provide potential valuable applications in filtering, and examples of filtering for LFM signals in FRFT domains are demonstrated to support the derived conclusions.

基于Duffing振子的伪码调相线性调频复合调制引信干扰设计

针对现代战场伪码调相与线性调频(LFM)复合调制引信干扰技术的迫切需求,在研究伪码调相与线性调频复合调制引信信号激励的Duffing振子输出信号特性的基础上,提出了基于Duffing振子阵列同步性和频率变化关系特性的复合调制引信参数估计方法,并在参数估计的基础上进一步提出了复合调制引信干扰波形的设计方案。在仿真与实验分析中,将基于Duffing振子的参数估计方法与典型复合调制引信信号参数估计方法进行对比,分析了基于所提参数估计方法重构出的干扰信号对复合调制引信的作用效果,并与传统欺骗式干扰方法进行半实物实验对比和验证。仿真与实验结果表明:所提参数估计方法在-35 dB信噪比(SNR)下能得到较高精度的参数估计结果,且重构出的引信干扰信号在-20 dB信噪比下优于其他传统的欺骗式干扰信号。

基于线性调频连续波的合作式通信辐射源测距

针对加速运动目标参数估计中,离散多项式变换方法无法进行非整数估计的问题,本文提出基于瑞夫算法的离散多项式变换法和基于Chirp-Z变换的离散多项式变换法2种新型离散多项式变换算法,对加速运动目标速度和加速度进行估计,并对2种算法的估计误差和计算量进行了分析比较。结果表明:2种算法在信噪比-20 dB时均方误差开始接近克拉美罗界。基于瑞夫算法的离散多项式变换法与3次迭代基于Chirp-Z变换的离散多项式变换法均可在较低信噪比下可实现任意频率的有效估计且性能接近,二者均可实现低信噪比下速度、加速度的有效估计,但基于瑞夫算法的离散多项式变换法计算量远小于3次迭代基于Chirp-Z变换的离散多项式变换法。

面向高速移动环境的二级信号检测算法

正交时间序列复用(OTSM)可以以更低的复杂度实现类似正交时频空间(OTFS)调制的传输性能,为未来需要低复杂度收发器的高速移动性通信系统提供一种有前景的解决方法。针对现有的基于时域的高斯-赛德尔(GS)迭代均衡效率不高的问题,提出二级信号检测算法。首先在时域进行低复杂度线性最小均方误差(LMMSE)检测,其次采用连续超松弛(SOR)迭代算法进一步消除残余符号干扰。为进一步提高收敛效率和检测性能,对SOR算法进行线性优化得到改进SOR(ISOR)算法。仿真实验结果表明,与SOR算法相比,ISOR算法在增加较低复杂度前提下可以提升检测性能并加快算法收敛。与GS迭代算法相比,ISOR算法采用16QAM调制且误码率为10-4时有1.61 dB的增益。

基于多特征融合的MIMO-OFDM系统单-混信号调制识别算法

为解决非协作通信中多输入多输出正交频分复用(multiple-input multiple-output orthogonal frequency division multiplexing, MIMO-OFDM)系统的单-混信号调制识别问题,提出一种基于多特征融合和决策融合的调制识别方法。首先,利用特征矩阵的联合近似对角化(joint approximate diagonalization of eigenvalue matrix, JADE)算法从接收端恢复发送信号;然后,提取恢复后信号的四次方谱、循环谱和高阶累积量作为输入样本,利用多特征融合网络对输入样本进行训练;最后,使用决策融合策略根据每条支路输出得到最终判决结果。仿真实验结果表明,所提方法可以对MIMO-OFDM系统中的7种信号进行有效识别,在信噪比为10 dB时识别精度可达99.4%。

基于FRFT的低信噪比LFM信号参数快速估计算法

基于分数阶傅里叶变换(Fractional Fourier Transform,FRFT)对线性调频(Linear Frequency Modulated,LFM)信号参数进行估计,问题关键是确定FRFT最佳阶数,根据误差迭代思想提出新的参数估计算法,该算法利用归一化带宽和旋转角的转化关系,由估计误差推算角度差值,有效降低了运算量,不需要调频斜率正负的先验信息,改进的对数搜索算法可以进一步提高参数估计结果的稳定性和可靠性。仿真结果表明,信噪比在-8 dB以上时该方法在高效率的前提下仍具有良好的参数估计性能,平均估计误差在1%以内,估计结果接近Cramer-Rao下限,满足工程实时处理需求。

超短基线在低频基阵指向性测量中的应用

随着水声换能器工作频率的降低,实验室空间很难达到自由场和远场测量的要求。而开阔水域的水下环境复杂,基阵很难实现更深层次的吊放,需要安装价格昂贵的吊装平台来获取标准声源与待测基阵之间的相对位姿,效率低且维护成本高。文章采用超短基线定位技术,信号选用线性调频脉冲信号与伪随机编码脉冲信号,并分别基于脉冲压缩法和复相关算法实现距离和相位测量。比对湖上定位精度试验和基阵指向性标定静态试验的结果显示:角度误差为2.5°以内;-6 dB波束宽度在2~10 kHz频率范围内测量误差在5.38%以内。证明超短基线定位在低频基阵指向性标定的可行性。

基于Born-Jordan分布的LFM-BPSK信号的参数估计

对线性调频-二进制相位编码(LFM-BPSK)复合调制信号的参数估计,现有方法在低信噪比(SNR)环境下估计精度较低。针对该问题,文中推导出了LFM-BPSK信号的Born-Jordan(BJD)时频分布,分析了LFM-BPSK信号的时频特性,并提出了基于BJD时频分布的参数估计算法。首先,该算法在BJD时频变换的基础上使用霍夫变换对LFM-BPSK信号初始频率和调频斜率进行估计,并将二维的BJD时频变换转化为一维时域信号,通过降维后的时域信号求解码元宽度;然后,为了探寻参数估计的理论下界,文中还推导了LFM-BPSK信号参数估计的修正克拉美罗下界(MCRLB);最后,利用蒙特卡洛实验对三个参数进行了测试。仿真实验表明,文中算法在低SNR下的参数估计精度明显优于现有的算法,其性能接近MCRLB。

脉冲噪声下基于CNN-FRFT的线性调频信号参数估计方法

由于脉冲噪声破坏了线性调频(LFM)信号的分数谱特征,使得基于分数谱特征的参数估计方法无法有效估计参数。针对这个问题,提出一种脉冲噪声环境下基于CNN-FRFT的LFM信号参数估计方法。首先,利用α稳定分布拟合随机脉冲噪声,构建加性含噪信号,输入卷积神经网络(CNN)进行训练和测试;其次,利用训练好的CNN模型对信号进行去噪,并验证模型的去噪能力和泛化能力;最后,利用分数阶傅里叶变换(FRFT)建立去噪信号的分数谱,通过峰值点位置来估计LFM信号的参数。实验结果表明,相比于传统的基于非线性函数的方法,该方法在强脉冲噪声环境下具有更好的精度和噪声鲁棒性,CNN的应用使其具有更强的泛化能力,在实测脉冲噪声下仍可以准确估计参数。

脉冲噪声下基于DCNN的LFM信号去噪方法

由于脉冲噪声具有明显的尖峰脉冲特性,使得基于高斯假设的传统去噪方法无法有效滤除脉冲噪声。针对这个问题,文中提出了一种脉冲噪声下基于深度卷积神经网络(DCNN)的线性调频(LFM)信号去噪方法。首先,生成LFM信号和随机脉冲噪声,构建不同广义信噪比下的数据集,输入DCNN进行训练和测试。进而,从时域波形图、分数谱、时频分布三个方面验证模型的去噪能力。最后,对去噪LFM信号进行分数阶傅里叶变换,通过搜寻分数谱中的峰值点来估计LFM信号的参数。仿真实验结果表明,文中方法不仅能够有效去除含噪信号中的随机脉冲噪声,而且还可以保持LFM信号的时域特征、分数谱特征和时频特征基本不变,进而提高了参数估计的噪声鲁棒性。与传统的基于非线性变换的方法相比,本文方法在低信噪比下仍能有效保持信号的分数谱特征和时频特征,具有更好的去噪性能和泛化能力。

基于时频边界拟合的NZ估计优化方法

奈奎斯特折叠接收机(NYFR)可以用少量设备实现宽带雷达信号接收,而测量接收信号的波形参数需要正确估计信号所在的奈奎斯特区(NZ)。针对目前广泛应用的线性调频(LFM)信号,在分析LFM信号经NYFR采样后时频图的基础上,对基于时频边界拟合的NZ估计方法进行了优化;讨论了NYFR结构中本振信号的调制系数和调制频率对该方法性能的影响,给出了NYFR的参数选择策略。仿真结果表明,优化后的时频边界拟合方法在信噪比优于-9 dB时,正确检测概率可达100%。