Experimental Study on Cyclic Mechanics Characteristic of Saturated Soft Clay Strata

Failure criterion of saturated soft clay is studied under cyclic loads through different experiments. A large number of cyclic torsional shear and cyclic triaxial tests on saturated soft clay under unconsolidated undrained condition are conducted. From the test result analysis, it is seen that the failure of saturated soft clay under static and cyclic loads satisfies Mises criterion. The result from different test stress states is not related to the test stress states or confining pressures. It can be applied in general stress states. Then according to the Mises criterion, the equivalent relationship on failure moment between the test stress state and the general stress state can be established. So the cyclic mechanics characteristics of saturated soft clay at failure moment are clarified in this paper. Furthermore, a theory basis is provided for using pseudo-static elasto-plastic cyclic strength model to evaluate cyclic bearing capacity.

Stiffness Degradation of Undisturbed Saturated Soft Clay in the Yangtze Estuary Under Complex Stress Conditions

Stiffness degradation will occur due to the generation of accumulated pore pressure in saturated soft clays under cyclic loading. The soil static-dynamic multi-purpose triaxial and torsional shear apparatus in Dalian University of Technology was employed to perform different types of test on the saturated soft marine clay in the Yangtze Estuary. Undisturbed samples of the clay were subjected to undrained cyclic vertical and torsional coupling shear and cyclic torsional shear after three-directional anisotropic consolidation with different initial consolidation parameters. Investigated were the effects of the initial orientation angle of the major principal stress, initial ratio of deviatoric stress, initial coefficient of intermediate principal stress and continuous rotation of principal stress axes on the stiffness degradation. It is found that the degradation index decreases （or degradation degree increases） significantly with increasing initial orientation angle of the major principal stress and initial ratio of deviatoric stress. Compared with the effects of the initial orientation angle of the major principal stress and initial ratio of deviatoric stress, the effect of initial coefficient of intermediate principal stress is less evident and this trend is more clearly reflected by the results of the cyclic torsional shear tests than those of the cyclic coupling shear tests. At the same cycle number, the degradation index obtained from the cyclic torsional shear test is higher than that from the cyclic coupling shear test. The main reason is that the continuous rotation in principal stress directions during cyclic coupling shear damages the original structure of the soil more than the cyclic torsional shear does.Based on a series of experiments, a mathematical model for stiffness degradation is proposed and the relevant parameters are determined.