Increasing Threat of Scarcity Prompts Rise in Water Recycling

In January 2018,construction wrapped on Salesforce Tower(Fig.1),a 61-story office building that now dominates the skyline of San Francisco,CA,USA.In addition to being the tallest building in the city,Salesforce Tower is the largest structure in the world with an onsite water recycling system.Built by the Australian com-pany Aquacell(Milton,NSW,Australia),the system cleans 113 m^(3)of sewage,sink,shower,and other wastewater each day for use in irrigation and flushing toilets,saving an estimated 35000 m?of water anmually[1].The building is just one of dozens in San Fran-cisco outitted with their own water recycling systems,thanks to a city mandate enacted in 2015[1].

Cycling performance of layered oxide cathode materials for sodium-ion batteries

Layered oxide is a promising cathode material for sodium-ion batteries because of its high-capacity,high operating voltage,and simple synthesis.Cycling performance is an important criterion for evaluating the application prospects of batteries.However,facing challenges,including phase transitions,ambient stability,side reactions,and irreversible anionic oxygen activity,the cycling performance of layered oxide cathode materials still cannot meet the application requirements.Therefore,this review proposes several strategies to address these challenges.First,bulk doping is introduced from three aspects:cationic single doping,anionic single doping,and multi-ion doping.Second,homogeneous surface coating and concentration gradient modification are reviewed.In addition,methods such as mixed structure design,particle engineering,high-entropy material construction,and integrated modification are proposed.Finally,a summary and outlook provide a new horizon for developing and modifying layered oxide cathode materials.

TuBG1 promotes hepatocellular carcinoma via ATR/P53-apoptosis and cycling pathways

Background:As reported,γ-tubulin(TuBG1)is related to the occurrence and development of various types of malignant tumors.However,its role in hepatocellular cancer(HCC)is not clear.The present study was to investigate the relationship between TuBG1 and clinical parameters and survival in HCC patients.Methods:The correlation between TuBG1 and clinical parameters and survival in HCC patients was ex-plored by bioinformatics analysis.Immunohistochemistry was used for the verification.The molecular function of TuBG1 was measured using colony formation,scratch assay,trans-well assay and flow cytometry.Gene set enrichment analysis(GSEA)was used to pick up the enriched pathways,followed by investigating the target pathways using Western blotting.The tumor-immune system interactions and drug bank database(TISIDB)was used to evaluate TuBG1 and immunity.Based on the TuBG1-related immune genes,a prognostic model was constructed and was further validated internally and externally.Results:The bioinformatic analysis found high expressed TuBG1 in HCC tissue,which was confirmed us-ing immunohistochemistry and Western blotting.After silencing the TuBG1 in HCC cell lines,more G1 arrested cells were found,cell proliferation and invasion were inhibited,and apoptosis was promoted.Furthermore,the silence of TuBG1 increased the expressions of Ataxia-Telangiectasia and Rad-3(ATR),phospho-P38 mitogen-activated protein kinase(P-P38MAPK),phospho-P53(P-P53),B-cell lymphoma-2 associated X protein(Bax),cleaved caspase 3 and P21;decreased the expressions of B-cell lymphoma-2(Bcl-2),cyclin D1,cyclin E2,cyclin-dependent kinase 2(CDK2)and CDK4.The correlation analysis of immunohistochemistry and clinical parameters and survival data revealed that TuBG1 was negatively corre-lated with the overall survival.The constructed immune prognosis model could effectively evaluate the prognosis.Conclusions:The increased expression of TuBG1 in HCC is associated with poor prognosis,which might be involved in the occurrence and development of HCC.

Enhanced High-Temperature Cycling Stability of Garnet-Based All Solid-State Lithium Battery Using a Multi-Functional Catholyte Buffer Layer

The pursuit of safer and high-performance lithium-ion batteries(LIBs)has triggered extensive research activities on solid-state batteries,while challenges related to the unstable electrode-electrolyte interface hinder their practical implementation.Polymer has been used extensively to improve the cathode-electrolyte interface in garnet-based all-solid-state LIBs(ASSLBs),while it introduces new concerns about thermal stability.In this study,we propose the incorporation of a multi-functional flame-retardant triphenyl phos-phate additive into poly(ethylene oxide),acting as a thin buffer layer between LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathode and garnet electro-lyte.Through electrochemical stability tests,cycling performance evaluations,interfacial thermal stability analysis and flammability tests,improved thermal stability(capacity retention of 98.5%after 100 cycles at 60℃,and 89.6%after 50 cycles at 80℃)and safety characteristics(safe and stable cycling up to 100℃)are demonstrated.Based on various materials characterizations,the mechanism for the improved thermal stability of the interface is proposed.The results highlight the potential of multi-functional flame-retardant additives to address the challenges associated with the electrode-electrolyte interface in ASSLBs at high temperature.Efficient thermal modification in ASSLBs operating at elevated temperatures is also essential for enabling large-scale energy storage with safety being the primary concern.

Green recycling of short-circuited garnet-type electrolyte for high-performance solid-state lithium batteries

Solid-state lithium batteries(SSLBs)solve safety issues and are potentially energy-dense alternatives to next-generation energy storage systems.Battery green recycling routes are responsible for the widespread use of SSLBs due to minimizing environmental contamination,reducing production costs,and providing a sustainable solution for resources,e.g.,saving rare earth elements(La,Ta,etc.).Herein,a solid-state recycling strategy is proposed to achieve green recycling of the crucial component solidstate electrolytes(SSEs)in spent SSLBs.The short-circuited garnet Li_(6.5)La_(3)Zr_(1.5)Ta_(0.5)O_(12)(LLZTO)is broken into fine particles and mixed with fresh particles to improve sintering activity and achieve high packing density.The continuous Li absorption process promotes sufficient grain fusion and guarantees the transformation from tetragonal phase to pure cubic phase for high-performance recycled LLZTO.The Li-ion conductivity reaches 5.80×10^(-4)S cm-1with a relative density of 95.9%.Symmetric Li cell with asrecycled LLZTO shows long-term cycling stability for 700 h at 0.3 mA cm^(-2)without any voltage hysteresis.Full cell exhibits an excellent cycling performance with a discharge capacity of 141.5 mA h g^(-1)and a capacity retention of 92.1%after 400 cycles(0.2C).This work develops an environmentally friendly and economically controllable strategy to recycle SSE from spent SSLBs,guiding future directions of SSLBs large-scale industrial application and green recycling study.

Interconnected and high cycling stability polypyrrole supercapacitors using cellulose nanocrystals and commonly used inorganic salts as dopants

Polypyrrole(PPy)is wildly used as electrode material in supercapacitors due to its high conductivity,low cost,ease of handling,and ease of fabrication.However,limited capacitance and poor cycling stability hinder its practical application.After developing carboxylated cellulose nanocrystals(CNC-COO^(-))as immobile dopants for PPy to improve its cycling stability,we investigated the effect of different commonly used salts(KCl,NaCl,KBr,and NaClO_(4))as dopants during electrode fabrication by electropolymerization.The film’s capacitance increased from 160.6 to 183.4 F g^(-1)after adding a combination of KCl and NaClO_(4) into the electrodeposition electrolyte.More importantly,the porous and interconnected PPy/CNC-COO^(-)-Cl-(Cl O_(4)^(-))_0.5 electrode film exhibited an excellent capacitance of 125.0 F g^(-1)(0.78 F cm^(-2))at a high current density of 2.0 Ag^(-1)(20 m A cm^(-2),allowing charging in less than 1 min),increasing almost 204%over PPy/CNC-COO-films.A symmetric PPy/CNC-COO^(-)-Cl-(ClO_(4)^(-))_0.5 supercapacitor retained its full capacitance after 5000 cycles,and displayed a high energy density of 5.2 Wh kg^(-1)at a power density of 25.4 W kg^(-1)(34.5μWh cm^(-2) at 1752.3μW cm^(-2)).These results reveal that the porous structure formed by doping with CNC-COO-and inorganic salts opens up more active reaction areas to store charges in PPy-based films as the stiff and ribbon-like CNC-COO-as permanent dopants improve the strength and stability of PPy-based films.Our demonstration provides a simple and practical way to deposit PPy based supercapacitors with high capacitance,fast charging,and excellent cycling stability.

Effect of Thermal-cold Cycling Treatment on Mechanical Properties and Microstructure of 6061 Aluminum Alloy

The influence of thermal-cold cycling treatment on mechanical properties and microstructure of 6061 aluminum alloy was investigated by means of tensile test, optical microscopy(OM), X-ray diffraction(XRD) and transmission electron microscopy(TEM). The cryogenic treatment mechanism of the alloys was discussed. The results show that thermal-cold cycling treatment is beneficial since it produces a large number of dislocations and accelerates the ageing process of the alloy and yields the finer dispersed β" precipitates in the matrix. This variation of microstructural changes leads to more favorable mechanical properties than the other investigated states, while grain boundary precipitation is coarse and distributed discontinuously along grain boundaries, with a lower precipitation free zone(PEZ) on the both sides of precipitated phase. As a result, the tensile strength, elongation and conductivity of 6061 aluminum alloy after thermal-cold cycling treatment are 373.37 MPa, 17.2% and 28.2 MS/m, respectively. Compared with conventional T6 temper, the mechanical properties are improved significantly.

Pore evolution and shear characteristics of a soil-rock mixture upon freeze-thaw cycling

The changes in pore structure within soil-rock mixtures under freeze-thaw cycles in cold regions result in strength deterioration,leading to instability and slope failure.However,the existing studies mainly provided qualitative analysis of the changes in pore or strength of soil-rock mixture under freeze-thaw cycles.In contrast,few studies focused on the quantitative evaluation of pore change and the relationship between the freeze-thaw strength deterioration and pore change of soil-rock mixture.This study aims to explore the correlation between the micro-pore evolution characteristics and macro-mechanics of a soil-rock mixture after frequent freeze-thaw cycles during the construction and subsequent operation in a permafrost region.The pore characteristics of remolded soil samples with different rock contents(i.e.,25%,35%,45%,and 55%)subjected to various freeze-thaw cycles(i.e.,0,1,3,6,and 10)were quantitatively analyzed using nuclear magnetic resonance(NMR).Shear tests of soil-rock samples under different normal pressures were carried out simultaneously to explore the correlation between the soil strength changes and pore characteristics.The results indicate that with an increase in the number of freeze-thaw cycles,the cohesion of the soil-rock mixture generally decreases first,then increases,and finally decreases;however,the internal friction angle shows no apparent change.With the increase in rock content,the peak shear strength of the soil-rock mixture rises first and then decreases and peaks when the rock content is at 45%.When the rock content remains constant,as the number of freeze-thaw cycles rises,the shear strength of the sample reaches its peak after three freeze-thaw cycles.Studies have shown that with an increase in freeze-thaw cycles,the medium and large pores develop rapidly,especially for pores with a size of 0.2–20μm.Freeze-thaw cycling affects the internal pores of the soil-rock mixture by altering its skeleton and,therefore,impacts its macro-mechanical characteristics.

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi_(0.5)Mn_(1.5)O_(4) spinel cathode materials

The poor structural stability and capacity retention of the high-voltage spinel-type LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)limits their further application.Herein,Al and Co were doped in LNMO materials for a more stable structure and capacity.The LNMO,LiNi_(0.45)Al_(0.05)Mn_(1.5)O_(4)(LNAMO)and LiNi_(0.45)Co_(0.05)Mn_(1.5)O_(4)(LNCMO)were synthesized by calcination at 900℃ for 8 h,which was called as solid-phase method and applied universally in industry.XRD,FT-IR and CV test results showed the synthesized samples have cation disordering Fd-3m space group structures.Moreover,the incorporation of Al and Co increased the cation disordering of LNMO,thereby increasing the transfer rate of Li+.The SEM results showed that the doped samples performed more regular and ortho-octahedral.The EDS elemental analysis confirmed the uniform distribution of each metal element in the samples.Moreover,the doped samples showed better electrochemical properties than undoped LNMO.The LNAMO and LNCMO samples were discharged with specific capacities of 116.3 mA·h·g^(-1)and 122.8 mA·h·g^(-1)at 1 C charge/discharge rate with good capacity retention of 95.8% and 94.8% after 200 cycles at room temperature,respectively.The capacity fading phenomenon of the doped samples at 50℃ and 1 C rate was significantly improved.Further,cations doping also enhanced the rate performance,especially for the LNCMO,the discharge specific capacity of 117.9 mA·h·g^(-1)can be obtained at a rate of 5 C.

Adaptive Route Sink Relocation Using Cluster Head Chain Cycling Model in WSN

Wireless Sensor Networks(WSN)have revolutionized the processes involved in industrial communication.However,the most important challenge faced by WSN sensors is the presence of limited energy.Multiple research inves-tigations have been conducted so far on how to prolong the energy in WSN.This phenomenon is a result of inability of the network to have battery powered-sensor terminal.Energy-efficient routing on packetflow is a parallel phenomenon to delay nature,whereas the primary energy gets wasted as a result of WSN holes.Energy holes are present in the vicinity of sink and it is an important efficient-routing protocol for WSNs.In order to solve the issues discussed above,an energy-efficient routing protocol is proposed in this study named as Adaptive Route Decision Sink Relocation Protocol using Cluster Head Chain Cycling approach(ARDSR-CHC2H).The proposed method aims at improved communica-tion at sink-inviting routes.At this point,Cluster Head Node(CHN)is selected,since it consumes low energy and permits one node to communicate with others in two groups.The main purpose of the proposed model is to reduce energy con-sumption and define new interchange technology.A comparison of simulation results demonstrates that the proposed algorithm achieved low cluster creation time,better network error and high Packet Delivery Rate with less network failure.

基于Cycling探针的实时荧光聚合酶链式反应检测河鲀鱼中掺杂的横纹东方鲀成分

目的开发基于Cycling探针实时荧光聚合酶链式反应(real-time fluorescent polymerase chain reaction,RT-PCR)用于检测河鲀鱼中横纹东方鲀(Takifugu oblongus,T.oblongus)成分。方法基于细胞色素C氧化酶亚型I(cytochrome C oxidase subunit I,COI)基因为靶标设计RT-PCR引物及Cycling探针,开发横纹东方鲀成分检测方法,评价方法的特异性、扩增效率、灵敏度和稳定性。结果横纹东方鲀成分与密切相关的其他8种河鲀鱼、4种其他鱼类物种DNA无交叉反应,具有很好的特异性;方法扩增效率为93.47%;方法重复18次均给出阳性报告的最小稀释点(limitofdetection6,LOD6)为14.64pg/μL(相对应的质量含量为0.1%),95%置信水平条件下检出限为34.41 pg/μL(11.59~119.05 pg/μL,LOD_(95%)),稳定性分析(P=0.152)表明该方法可转移到其他实验室以及在常规分析中使用。结论本研究开发的Cycling探针RT-PCR方法可对河鲀鱼食品中掺杂0.1%的横纹东方鲀成分进行可靠追溯。

Radicals on the silica surface:probes for studying dynamics by means of fast field cycling relaxometry and dynamic nuclear polarization

Determining the dynamics of adsorbed liquids on nanoporous materials is crucial for a detailed understanding of interactions and processes on the solid-liquid interface in many materials and porous systems.Knowledge of the influence of the presence of paramagnetic species on the surface or within the porous matrices is essential for fundamental studies and industrial processes such as catalysts.Magnetic resonance methods,such as electron paramagnetic resonance(EPR),nuclear magnetic resonance(NMR)and dynamic nuclear polarization(DNP),are powerful tools to address these questions and to quantify dy-namics,electron-nuclear interaction features and their relation to the physical-chemical parameters of the system.This paper presents an NMR study of the dynamics of polar and nonpolar adsorbed liquids,represented by water,n-decane,deuterated water and nonane-d20,on the native silica surface as well as silica modified with vanadyl porphyrins.The analysis of the frequency dependence of the nuclear spin-lattice relaxation time is carried out by separating the intra-and intermolecular contributions,which were analyzed using reorientations mediated by translational displacements(RMTD)and force-free-hard-sphere(FFHS)models,respectively.

Hydrogen absorption/desorption cycling performance of Mg-based alloys with in-situ formed Mg_(2)Ni and LaH_(x)(x=2,3)nanocrystallines

Aiming to elucidate the hydrogen absorption/desorption cycling properties of Mg-based alloys with in-situ formed Mg_(2)Ni and LaH_(x)(x=2,3)nanocrystallines,the hydrogen storage cycle stability,hydriding/dehydriding cycling kinetics and thermodynamic stability of the experimental alloys have been investigated in detail.The results show that the Mg-Ni-La alloys exhibit improved hydrogen storage cycling properties and can remain storage hydrogen above 5.5 wt%after 200 cycles.With the increase of cycling numbers,the dehydrogenation rates of the experimental samples increase firstly and then gradually decrease,and eventually maintain relative stable state.Microstructure observation reveals that powders sintering and hydrogen decrepitation both exist during hydrogen absorption/desorption cycles due to repeated volume expansion and contraction.Meanwhile,the in-situ formed LaH_(x)(x=2,3)and Mg_(2)Ni nanocrystallines stabilize the microstructures of the particles and hinder the powders sintering.After 200 cycles,the average particle size of the experimental samples decreases and the specific surface area apparently increases,which leads to the decomposition temperatures of MgH_(2)and Mg_(2)NiH_(4)slightly shift to lower temperatures.Moreover,Mg_(2)Ni and LaH_(x)(x=2,3)have been proven to be stable catalysts during long-term cycling,which can still uniformly distribute within the powders after 200 cycles.

布鲁菌Cycling探针荧光定量PCR检测方法的建立

根据布鲁菌BCSP31基因序列设计布鲁菌通用检测引物和探针,建立了布鲁菌Cycling探针荧光定量PCR检测方法。以构建的含BCSP31基因的质粒标准品10倍递进稀释为模板检测其敏感性,结果显示,本方法能检测约10个拷贝的阳性质粒,且标准曲线的线性关系良好。用本方法检测5株不同种的布鲁菌以及猪大肠杆菌K99、巴氏杆菌C48-1、猪链球菌ST171、绿脓杆菌等4株对照菌。结果显示,5株不同种的布鲁菌均出现典型的"S"型扩增曲线,4株对照菌40个循环内均无CT值出现。用本方法和B4/B5-PCR方法对来自布鲁菌病流行地区3个不同牛场的40份血样、奶样和血清样进行平行检测。结果显示,本方法和B4/B5-PCR方法的结果符合率为80.0%。B4/B5-PCR检测为阳性的27份样品经本方法检测均为阳性;B4/B5-PCR检测为阴性的13份样本,经本方法检测,其中8份呈阳性,5份为阴性。本方法的敏感性明显高于B4/B5-PCR方法。试验表明,所建立的Cycling探针荧光定量PCR方法具有敏感、特异、稳定等特点,可用于布鲁菌感染的快速检测。

Life Cycle Assessment of Recycling High-Density Polyethylene Plastic Waste

Increasing production and use of various novel plastics products,a low recycling rate,and lack of effective recycling/disposal methods have resulted in an exponential growth in plastic waste accumulation in landfills and in the environment.To better understand the effects of plastic waste,Life Cycle Analysis(LCA)was done to compare the effects of various production and disposal methods.LCA shows the specific effects of the cradle-to-grave or cradle-to-cradle scenarios for landfill,incineration,and mechanical recycling.The analysis clearly indicates that increasing recycling of plastics can significantly save energy and eliminate harmful emissions of various carcinogens and GHGs into the environment.As recycling increases,the need for virgin-plastic production can be greatly reduced.Furthermore,the results of this study may help improve current mechanical recycling processes as well as potential future recycling methods,such as chemical recycling.Concerns about the current recycling/disposal methods for plastics have brought increasing attention to the waste accumulation problem.However,with the current COVID-19 pandemic,plastic accumulation is expected to increase significantly in the near future.A better understanding of the quantitative effects of the various disposal methods can help guide policies and future research toward effective solutions of the plastic waste problem.

Cycling Hardening and Serration Yielding of Fe-Ni-Cr Alloy at High Temperature under Out-phase TMF

Behaviour of hardening and serration yield of a Fe-Ni-Cr alloy under isothermal cycling （ISC） and out-phase TMF was studied on the basis of varied hysteresis loops. Cycling hardening and serrated yielding for ISC depend on the temperature and the total strain range, stronger hardening with serrated yielding at higher strain range under ISC at 600 ℃, but no hardening and serrated yielding occurred under ISC at 800 ℃. Stronger hardening with stress serration occurred at the thermal path going to the lowest temperature, no stress serration occurred at the highest temperature under the out-phase. The hardening also depends on the total strain range, higher total strain range with lower cycling temperature resulted in a stronger hardening and remarkable serration yielding behavior. Weaker hardening without serrated yielding occurred at near 800℃ may due to an obvious cycling stress drop under out-phase TMF. Change in the shape of the hysteresis loops also expresses the degree of the damage of the tested alloy under out-phase and ISC.

Planning of Urban Cycling Routes Aiming at Improving Cycling Quality

Urban cycling environment is an important part of urban slow-moving system,and reasonable route planning is beneficial to the health of residents.In order to improve residents’ cycling quality and enrich travel experience,the evaluation system of cycling quality in the main urban area of Handan City was established from the four aspects of convenience,safety,comfort and experience.According to different travel needs,the cycling evaluation index of road sections was calculated and modified to obtain the cycling time of road sections.The shortest route algorithm was used to generate the best riding route for convenience,the best riding route for safety,the best riding route for comfort,and the best riding route for experience.Cycling evaluation indicators were combined with travel route planning to provide residents with a variety of humanized route options,and effectively improve the cycling quality and travel health of residents,which is of great significance to promoting green travel and improving residents’ health.

Nitrogen cycling of atmosphere-plant-soft system in the typical Calamagrostis angustifolia wetland in the Sanjiang Plain,Northeast China

The nitrogen （N） distribution and cycling of atmosphere-plant-soil system in the typical meadow Calamagrostis angustifolia wetland （TMCW） and marsh meadow Calamagrostis angustifolia wetland （MMCW） in the Sanjiang plain were studied by a compartment model. The results showed that the N wet deposition amount was 0.757 gN/（m^2·a）, and total inorganic N （TIN） was the main body （0.640 gN/（m^2·a））. The ammonia volatilization amounts of TMCW and MMCW soils in growing season were 0.635 and 0.687 gN/m^2, and the denitrification gaseous lost amounts were 0.617 and 0.405 gN/m^2, respectively. In plant subsystem, the N was mainly stored in root and litter. Soil organic N was the main N storage of the two plant-soil systems and the proportions of it were 93.98% and 92.16%, respectively. The calculation results of N turnovers among compartments of TMCW and MMCW showed that the uptake amounts of root were 23.02 and 28.18 gN/（m^2·a） and the values of aboveground were 11.31 and 6.08 gN/（m^2·a）, the re-translocation amounts from aboveground to root were 5.96 and 2.70 gN/（m^2·a）, the translocation amounts from aboveground living body to litter were 5.35 and 3.38 gN/（m^2·a）, the translocation amounts from litter to soil were larger than 1.55 and 3.01 gN/（m^2·a）, the translocation amounts from root to soil were 14.90 and 13.17 gN/（m^2·a）, and the soil （0-15 cm） N net mineralization amounts were 1.94 and 0.55 gN/（m^2·a）, respectively. The study of N balance indicated that the two plant-soil systems might be situated in the status of lacking N, and the status might induce the degradation of C. angustifolia wetland.

Biomass production,nutrient cycling and distribution in age-sequence Chinese fir(Cunninghamia lanceolate)plantations in subtropical China

Biomass production and nutrient （N, P, K, Ca and Mg） accumulation, distribution and cycling were quantified in young, mature and over-mature （10-, 22-, and 34-year old） Chinese fir [Cunninghamia lanceolate （Lamb.） Hook] plantations in southern China. Total stand biomass of young, mature and over-mature stands was 38, 104 and 138 t ha-1 respectively. Biomass production increased significantly with age. Stem wood represented the highest percentage of stand biomass, accounting for 41, 55 and 63 % in the young, mature and over-mature plan- tations respectively. Nutrients concentration was highest in live needles and branches, and lowest in stem wood. The plantations accumulated more N, followed by K, Ca, Mg, and P. Nutrient return amount, nutrient utilization effi- ciency, nutrient turnover time, the ratio of nutrient return and uptake increased with stand age, which implies that young Chinese fir deplete soil nutrients to maintain growth, and efficiently utilize nutrients to decrease dependence on soil nutrients as they age. Harvesting young Chinese fir plantations would therefore lead to high nutrient loss, but prolonging the rotation length could improve soil recovery, and help sustain productivity in the long-term. Improved nutrient return through litterfall as stands get older may also be beneficial to nutrient pool recovery.

Research Progress in Improving the Cycling Stability of High-Voltage LiNi0.5Mn1.5O4 Cathode in Lithium-Ion Battery

High-voltage lithium-ion batteries(HVLIBs) are considered as promising devices of energy storage for electric vehicle, hybrid electric vehicle, and other high-power equipment. HVLIBs require their own platform voltages to be higher than 4.5 V on charge. Lithium nickel manganese spinel LiNi_(0.5)Mn_(1.5)O_4(LNMO) cathode is the most promising candidate among the 5 V cathode materials for HVLIBs due to its flat plateau at 4.7 V. However, the degradation of cyclic performance is very serious when LNMO cathode operates over 4.2 V. In this review, we summarize some methods for enhancing the cycling stability of LNMO cathodes in lithium-ion batteries, including doping, cathode surface coating,electrolyte modifying, and other methods. We also discuss the advantages and disadvantages of different methods.