Relationship between Colored Microstructure under Polarized Light and Shape Recovery Characteristics on the Thermomechanical Cycled CuAlNi Single Crystals

The paper studied the relationship between microstructure and shape recovery characteristics by using colored microstructure analysis under polarized light on the thermomechanical cycled CuAlNi single crystals. The two-way shape memory effect in quenched thin bar resulted from the preferential formation/extinction of martensite variant due to the internal quench stress, and the variant was formed at an angle of about 45 deg. with the tension direction ([001] of the βphase). Initial thermomechanical cycling under relatively low stress single variant stress-induced martensite was formed at an angle of 45 deg. with the tension and its morphology was a lath of parallel twins. More than one group of variants were formed after several training cycles and such variants also caused tilting of some thermally formed accommodated martensite. By overheating the trained sample containing stabilized multi-variants of stress-induced martensite, very coarse martensite structure with a strong asymmetry was produced, which caused the reverse two-way shape memory effect.

Characteristic Analysis of the Temperature Variation in Baoji City in Past 52 Years

The characteristics of the temperature variation in Baoji City were analyzed with the temperature data from 1952 to 2003.The results showed that the value of annual average temperature and seasonal average temperature wavily rose before 1980 and obviously ascended after 1980.During the period of last 52 years,there was a process of ascent-descent-ascent in summer seasonal temperature variation.While in autumn and winter,the temperature decreased at first and then increased.The steady ascent of the temperature in summer season had a great contribution to the increment of its average temperature.The type of the variation trend in the average temperature in Baoji in recent 52 years was verified according to the results.

Pacing and predictors of performance during cross-country skiing races:A systematic review

Background： Cross-country skiing （XCS） racing, a popular international winter sport, is complex and challenging from physical, technical, and tactical perspectives. Despite the vast amount of research focusing on this sport, no review has yet addressed the pacing strategies of elite XCS racers or the factors that influence their performance. The aim was to review the scientific literature in an attempt to determine the effects of pacing strategy on the performance of elite XCS racers. Methods： Four electronic databases were searched using relevant subject headings and keywords. Only original research articles published in peerreviewed journals and the English language and addressing performance, biomechanics, physiology, and anthropometry of XCS racers were reviewed. Results： All 27 included articles applied correlative designs to study the effectiveness of different pacing strategies. None of the articles involved the use of an experimental design. Furthermore, potential changes in external conditions （e.g.,weather, ski properties） were not taken into consideration. A comparable number of studies focused on the skating or classical technique. In most cases, positive pacing was observed, with certain indications that higher-level athletes and those with more endurance and strength utilized a more even pacing strategy. The ability to achieve and maintain a long cycle length on all types of terrain was an important determinant of performance in all of the included studies, which was not the case for cycle rate. In general, uphill performance was closely related to overall race performance, with uphill performance being most closely correlated to the success of female skiers and performance on flat terrain being more important for male skiers. Moreover, pacing was coupled to the selection and distribution of technique during a race, with faster skiers employing more double poling and kick double poling, less diagonal stride, and more V2 （double dance） than V1 （single dance） skating across a race. Conclusion： We propose that skiers at all levels can improve their performance with more specific training in techniques （i.e., maintaining long cycles without compromising cycle rate and selecting appropriate techniques） in combination with training for endurance and more strength. Furthermore, we would advise less experienced skiers and/or those with lower levels of performance to apply a more even pacing strategy rather than a positive one （i.e., starting the race too fast）.2018 Published by Elsevier B.V. on behalf of Shanghai University of Sport. This is an open access article under the CC BY-NC-ND license. （http：//creativecommons.org/licenses/by-nc-nd/4.0/）.

Study on microstructures and properties of preheated flash butt welded SW400 steel joints

Under the spirit of sustainable development, ‘lightweight’ has been gradually included into the vehicle design criterion by many manufacturers and used in automobile production. Following this trend, domestic wheel suppliers also begin to study the technology of lightweight wheel. One way to achieve this goal is improving strength grade of the steel and optimizing the structure design in the field of steel wheels. But there are a few problems in flash butt welding process in the application of high strength steel, leading to high rejection rates. SW400 steel is a special high strength wheel steel developed by Benxi Steel. Taking SW400 steel as the research material, this article studys the feasibility of improving the properties of rim flash butt welded joints by adding preheating process.

Economy of Energy during Refrigerating Machine Operation

Idealized cycles of refrigerating machines with adiabatic and isothermal compression of refrigerant vapor were investigated. Energetic characteristics of cycles： specific mass and volume cooling capacity q0 and qv, work of compression 1, refrigerating coefficient of performance e and power N for drive of compressor were compared. These characteristics were calculated for eight refrigerants at temperature of their condensation 30 ℃ and temperatures of boiling -15℃ and -30 ℃. The calculations show that the use of isothermal compression of refrigerant vapor ensures economy of energy during refrigerating machine operation.

Finite Element Simulation of Thermal Field in Double Wire Welding

In this paper, the thermal field of double wire welding is simulated by using ANSYS software. Simulation results were shown that the total heat input (E) is the most significant parameters to change the value of t8/5;By the mean of rationally controlling the proportion of the front arc heat input (E1) in the total heat input (E) and appropriately selecting double wire spacing (L), It is effective means to get the double wire welding thermal cycle. By the way of simulation, it is possible to manage the thermal input in the double welding wires and to control the temperature field and cooling rate that are fundamental for the final joint quality, it is great importance guidance to optimize the double wire welding process parameters.

Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs

The objective of this paper is to present a simulation study on the two-stage absorption refrigeration systems of 2.5 kW capacity using LiBr-H2O,NH3-H2O and R124-DMAC as working pairs.Under the design condition that the generating,absorbing,evaporating and condensing temperatures are 75℃,45℃,5℃and 40℃,respectively,the high and low pressure side solution circulation ratios and the coefficient of performance(COP)for the systems are calculated.Then the influences of medium,generating,absorbing,evaporating and condensing temperatures on system performances are analyzed.The results show that under the design condition,the COP of the LiBr-H2Osystem can reach 0.49,superior to those of the NH3-H2O and R124-DMAC systems,which are 0.32 and 0.31,respectively.Furthermore,the medium temperature for higher COP lies in an interval of 64-67℃for the LiBr-H2O.NH3-H2O and R124-DMAC systems.High generating temperature and low absorbing temperature can decrease the high and low pressure side solution circulation ratios,and can also increase the COP.High evaporating temperature can decrease the low pressure side solution circulation ratio and increase the COP.Low condensing temperature can decrease the high pressure side solution circulation ratio and increase the COP.