A new 140 GHz/2 MW/3 s electron cyclotron resonance heating （ECRH） system composed of two units is now being constructed on HL-2A. As a part of the system, two trans- mission lines marked No.7 ＆ 8 play the role of ...A new 140 GHz/2 MW/3 s electron cyclotron resonance heating （ECRH） system composed of two units is now being constructed on HL-2A. As a part of the system, two trans- mission lines marked No.7 ＆ 8 play the role of carrying microwave power from two gyrotrons to the tokamak port. Based on the oversized circular corrugated waveguide technology, an evacu~ ated transmission system with high power capability and high transmission efficiency is designed. Details are presented for the design of the corrugated waveguide, the layout of the proposed lines and the vacuum pumping system. Then mode conversion losses due to coupling, misalignment, bends and gaps are discussed to serve as a reference for analyzing the transmission efficiency and alignment. Finally, a dual-modes propagation case consisting of the HEll and LPn even modes is discussed.展开更多
Ion cyclotron resonance heating （ICRH） system which will provide at least than 10 MW heating power, with a frequency range from 25 MHz to 100 MHz, is being built up for the EAST. The system includes high-power and w...Ion cyclotron resonance heating （ICRH） system which will provide at least than 10 MW heating power, with a frequency range from 25 MHz to 100 MHz, is being built up for the EAST. The system includes high-power and wide-frequency radio amplifier, transmission line as well as resonant double loop （RDL） antenna. As a part of this system a sub-ICRH system unit with a ultimate output power of 2.5 MW was set up and employed for heating experiment. The maximum of the launched power reached 200 kW in 2008.展开更多
A cold-cathode Penning Ion Gauge(PIG) type ion source as the internal ion source of an 11 MeV cyclotron is designed and tested at Institute of Fluid Physics.The design considerations and some testings are presented.Ex...A cold-cathode Penning Ion Gauge(PIG) type ion source as the internal ion source of an 11 MeV cyclotron is designed and tested at Institute of Fluid Physics.The design considerations and some testings are presented.Experimental results of Balmer-line-Emission show that the discharge characteristic,which is mainly determined by gas-flow rate,is not very sensitive to arc current and magnetic field in the operation ranges of the cyclotron.The arc power decreases and ascends while the gas-flow rate goes up from 0.5 SCCM to 20 SCCM.By improving the sealing design and reducing the machine tolerance of the source,the minimum power consumption reduces from 9 SCCM to 4 SCCM,thus having better energy efficiency and benefiting for the pumping system.Preliminary DC extractions show that H–microampere current ranges from several tens to hundreds under different operation conditions.Some problems during the experiments and future plan are discussed in the end.展开更多
1.5MW Ion Cyclotron Wave Heating system was developed, the transmitter and the antenna both have their ground loops, which will severely perturb the system’s normal operation. To avoid perturbation, a DC break was de...1.5MW Ion Cyclotron Wave Heating system was developed, the transmitter and the antenna both have their ground loops, which will severely perturb the system’s normal operation. To avoid perturbation, a DC break was designed. The S parameter and the VSWR (voltage standing wave ratio) of incident port were calculated; the thermal effect caused by conductor loss and dielectric loss was analyzed.展开更多
基金supported by the International Thermonuclear Experimental Reactor Special Fund of China(No.2009GB102002)partly supported by the Core University Program on Plasma and Nuclear Fusion between China and Japan
文摘A new 140 GHz/2 MW/3 s electron cyclotron resonance heating （ECRH） system composed of two units is now being constructed on HL-2A. As a part of the system, two trans- mission lines marked No.7 ＆ 8 play the role of carrying microwave power from two gyrotrons to the tokamak port. Based on the oversized circular corrugated waveguide technology, an evacu~ ated transmission system with high power capability and high transmission efficiency is designed. Details are presented for the design of the corrugated waveguide, the layout of the proposed lines and the vacuum pumping system. Then mode conversion losses due to coupling, misalignment, bends and gaps are discussed to serve as a reference for analyzing the transmission efficiency and alignment. Finally, a dual-modes propagation case consisting of the HEll and LPn even modes is discussed.
基金supported by the JSPS-CAS Core-University Program in the field of Plasma and Nuclear Fusion
文摘Ion cyclotron resonance heating （ICRH） system which will provide at least than 10 MW heating power, with a frequency range from 25 MHz to 100 MHz, is being built up for the EAST. The system includes high-power and wide-frequency radio amplifier, transmission line as well as resonant double loop （RDL） antenna. As a part of this system a sub-ICRH system unit with a ultimate output power of 2.5 MW was set up and employed for heating experiment. The maximum of the launched power reached 200 kW in 2008.
基金Supported by Army-Civilian Technology Development of CAEP(No.JM200701)National Natural Science Foundation of China(No.11105130)Science Foundation of CAEP(No.2012B0402056)
文摘A cold-cathode Penning Ion Gauge(PIG) type ion source as the internal ion source of an 11 MeV cyclotron is designed and tested at Institute of Fluid Physics.The design considerations and some testings are presented.Experimental results of Balmer-line-Emission show that the discharge characteristic,which is mainly determined by gas-flow rate,is not very sensitive to arc current and magnetic field in the operation ranges of the cyclotron.The arc power decreases and ascends while the gas-flow rate goes up from 0.5 SCCM to 20 SCCM.By improving the sealing design and reducing the machine tolerance of the source,the minimum power consumption reduces from 9 SCCM to 4 SCCM,thus having better energy efficiency and benefiting for the pumping system.Preliminary DC extractions show that H–microampere current ranges from several tens to hundreds under different operation conditions.Some problems during the experiments and future plan are discussed in the end.
基金The project supported by the National Science Foundation of China (No. 10274089) National High Technology Program of China
文摘1.5MW Ion Cyclotron Wave Heating system was developed, the transmitter and the antenna both have their ground loops, which will severely perturb the system’s normal operation. To avoid perturbation, a DC break was designed. The S parameter and the VSWR (voltage standing wave ratio) of incident port were calculated; the thermal effect caused by conductor loss and dielectric loss was analyzed.
