In this paper, by change of integration path in complex spectrum domain and by defining input admittance as the ratio of complex radiated power to amplitude of square of voltage across the gap, new expressions of admi...In this paper, by change of integration path in complex spectrum domain and by defining input admittance as the ratio of complex radiated power to amplitude of square of voltage across the gap, new expressions of admittance (valid for all frequencies ) of infinitely long cylindrical antenna with and without conducting ground are obtained. Meanwhile corresponding formulas of current distribution are derived in detail. Some numerical computations are also given.展开更多
A bidirectional deployable parabolic cylindrical reflector for an L-band synthetic aperture radar is presented in this study, in which a self-deployed antenna with low weight was designed. The antenna consists of four...A bidirectional deployable parabolic cylindrical reflector for an L-band synthetic aperture radar is presented in this study, in which a self-deployed antenna with low weight was designed. The antenna consists of four curved surfaces formed from thin sheets of composite materials connected by hinges along the edges, and the reflective surface is provided by the front surface. The edge profiles of connecting lines were obtained through geometric analysis. A scaled model, including design and manufac- ture, was demonstrated to validate the process from the folded state to the fully deployed state. The non-contact synchronous vision measuring method was used to test the basic frequency of the scaled model, and the test results gave the verification of the analyses. Compared with the existing unidirectional deployable antenna, this new type of bidirectional deployable antenna can be applied to larger-size antennas and has better performance because the glass-woven tape connections were substituted with more reliable hinges. Static, modal, harmonic response, and transient response analyses of the full-sized reflector structure were mod- eled with the commercial finite element （FE） package ABAQUS. The modeling techniques were developed to predict the struc- tural dynamic behavior of the reflector and the results showed that the first natural frequency was 0.865 Hz, and the reflector structure had good stiffness in three directions. This proposed structure has very high stiffness-to-mass ratio because of its hollow solid construction. A preliminary simulation of radiation properties of the parabolic cylindrical antenna, fed by an off-set linear feed horn array, was conducted to obtain the radiation pattern of the feed and the reflector.展开更多
The functionality of the plasma antenna has been narrowed to types and brand names only. The physics of its operation has been neglected and has stagnated technological innovations. The magnetic field in the sheath an...The functionality of the plasma antenna has been narrowed to types and brand names only. The physics of its operation has been neglected and has stagnated technological innovations. The magnetic field in the sheath and plasma were investigated. Notable specifications were worked out in the proposed improved cylindrical monopole plasma antenna. The occurrence of femto spin demagnetization was discovered between the duration of switch on and switch off of the antenna. This phenomenon seems transient because magnetization is highest at the switch on/off point.展开更多
This paper studies the performance of a submillimeter wave antenna operating between frequencies 0.1 THz and 10 THz with a 4-cyano-4-pentylbiphenyl[5CB]substrate.Since the size and shape of the antenna impact its gain...This paper studies the performance of a submillimeter wave antenna operating between frequencies 0.1 THz and 10 THz with a 4-cyano-4-pentylbiphenyl[5CB]substrate.Since the size and shape of the antenna impact its gain/directivity,resonant frequency,bandwidth,and efficiency,the two antenna types considered in this paper are:(a)Rectangular Patch Antenna(RPA),and(b)Cylindrical Dielectric Resonator Antenna(CDRA).Here a submillimeter wave antenna is compared with a millimeter wave(a few GHz to 100 GHz)antenna.These popular mmwave antennas are chosen for the submillimeter wave antenna in order to understand changes in their performance as the result of changes in their geometrical shape.FEldberechnung bei Korpern mit beliebiger Oberflache(FEKO)software is used for the design and calculation of the Three-Dimensional(3D)ElectroMagnetic(EM)patterns.This paper also concentrates on the design and analysis of a massive submillimeter wave Multiple-Input Multiple-Output(MIMO)(8 by 8)RPA and CDRA.展开更多
文摘In this paper, by change of integration path in complex spectrum domain and by defining input admittance as the ratio of complex radiated power to amplitude of square of voltage across the gap, new expressions of admittance (valid for all frequencies ) of infinitely long cylindrical antenna with and without conducting ground are obtained. Meanwhile corresponding formulas of current distribution are derived in detail. Some numerical computations are also given.
文摘A bidirectional deployable parabolic cylindrical reflector for an L-band synthetic aperture radar is presented in this study, in which a self-deployed antenna with low weight was designed. The antenna consists of four curved surfaces formed from thin sheets of composite materials connected by hinges along the edges, and the reflective surface is provided by the front surface. The edge profiles of connecting lines were obtained through geometric analysis. A scaled model, including design and manufac- ture, was demonstrated to validate the process from the folded state to the fully deployed state. The non-contact synchronous vision measuring method was used to test the basic frequency of the scaled model, and the test results gave the verification of the analyses. Compared with the existing unidirectional deployable antenna, this new type of bidirectional deployable antenna can be applied to larger-size antennas and has better performance because the glass-woven tape connections were substituted with more reliable hinges. Static, modal, harmonic response, and transient response analyses of the full-sized reflector structure were mod- eled with the commercial finite element （FE） package ABAQUS. The modeling techniques were developed to predict the struc- tural dynamic behavior of the reflector and the results showed that the first natural frequency was 0.865 Hz, and the reflector structure had good stiffness in three directions. This proposed structure has very high stiffness-to-mass ratio because of its hollow solid construction. A preliminary simulation of radiation properties of the parabolic cylindrical antenna, fed by an off-set linear feed horn array, was conducted to obtain the radiation pattern of the feed and the reflector.
文摘The functionality of the plasma antenna has been narrowed to types and brand names only. The physics of its operation has been neglected and has stagnated technological innovations. The magnetic field in the sheath and plasma were investigated. Notable specifications were worked out in the proposed improved cylindrical monopole plasma antenna. The occurrence of femto spin demagnetization was discovered between the duration of switch on and switch off of the antenna. This phenomenon seems transient because magnetization is highest at the switch on/off point.
文摘This paper studies the performance of a submillimeter wave antenna operating between frequencies 0.1 THz and 10 THz with a 4-cyano-4-pentylbiphenyl[5CB]substrate.Since the size and shape of the antenna impact its gain/directivity,resonant frequency,bandwidth,and efficiency,the two antenna types considered in this paper are:(a)Rectangular Patch Antenna(RPA),and(b)Cylindrical Dielectric Resonator Antenna(CDRA).Here a submillimeter wave antenna is compared with a millimeter wave(a few GHz to 100 GHz)antenna.These popular mmwave antennas are chosen for the submillimeter wave antenna in order to understand changes in their performance as the result of changes in their geometrical shape.FEldberechnung bei Korpern mit beliebiger Oberflache(FEKO)software is used for the design and calculation of the Three-Dimensional(3D)ElectroMagnetic(EM)patterns.This paper also concentrates on the design and analysis of a massive submillimeter wave Multiple-Input Multiple-Output(MIMO)(8 by 8)RPA and CDRA.
