A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small sphe...A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small spherical explosive charge generated in rock, is used to further study the triggering time of strain gauges installed in radial direction at same distances but different positions surrounding a cylindrical explosive charge in rock. The duration of the first compression phase and peak value of strain wave, and furthermore, their differences are analyzed and some explanations are given. Besides that, the gauge orientation in which the maximum peak value occurs is also discussed. At last, the effect of velocity of detonation(V.O.D.) of a cylindrical explosive charge on the strain waves generated in the surrounding rock is taken as key research and the pattern of peak amplitude of a strain wave varies with the V.O.D. is likely to have been found.展开更多
The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been conducted to pre...The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been conducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang’s formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.展开更多
Explosion models based on Finite Element Analysis(FEA)can be used to simulate how a warhead fragments.However their execution times are extensive.Active protection systems need to make very fast predictions,before a f...Explosion models based on Finite Element Analysis(FEA)can be used to simulate how a warhead fragments.However their execution times are extensive.Active protection systems need to make very fast predictions,before a fast attacking weapon hits the target.Fast execution times are also needed in real time simulations where the impact of many different computer models is being assessed.Hence,FEA explosion models are not appropriate for these real-time systems.The research presented in this paper delivers a fast simulation model based on Mott’s equation that calculates the number and weight of fragments created by an explosion.In addition,the size and shape of fragments,unavailable in Mott’s equation,are calculated using photographic evidence and a distribution of a fragment’s length to its width.The model also identifies the origin of fragments on the warhead’s casing.The results are verified against experimental data and a fast execution time is achieved using uncomplicated simulation steps.The developed model then can be made available for real-time simulation and fast computation.展开更多
基金Projects(51304239,51374243)supported by the National Natural Science Foundation of China
文摘A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small spherical explosive charge generated in rock, is used to further study the triggering time of strain gauges installed in radial direction at same distances but different positions surrounding a cylindrical explosive charge in rock. The duration of the first compression phase and peak value of strain wave, and furthermore, their differences are analyzed and some explanations are given. Besides that, the gauge orientation in which the maximum peak value occurs is also discussed. At last, the effect of velocity of detonation(V.O.D.) of a cylindrical explosive charge on the strain waves generated in the surrounding rock is taken as key research and the pattern of peak amplitude of a strain wave varies with the V.O.D. is likely to have been found.
基金financial support from the exploratory project of State Key Laboratory of Explosion Science and Technology, China (No. QNKT19-09)。
文摘The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been conducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang’s formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.
文摘Explosion models based on Finite Element Analysis(FEA)can be used to simulate how a warhead fragments.However their execution times are extensive.Active protection systems need to make very fast predictions,before a fast attacking weapon hits the target.Fast execution times are also needed in real time simulations where the impact of many different computer models is being assessed.Hence,FEA explosion models are not appropriate for these real-time systems.The research presented in this paper delivers a fast simulation model based on Mott’s equation that calculates the number and weight of fragments created by an explosion.In addition,the size and shape of fragments,unavailable in Mott’s equation,are calculated using photographic evidence and a distribution of a fragment’s length to its width.The model also identifies the origin of fragments on the warhead’s casing.The results are verified against experimental data and a fast execution time is achieved using uncomplicated simulation steps.The developed model then can be made available for real-time simulation and fast computation.
