Three-dimensional(3D) synthetic aperture radar(SAR)extends the conventional 2D images into 3D features by several acquisitions in different aspects. Compared with 3D techniques via multiple observations in elevation, ...Three-dimensional(3D) synthetic aperture radar(SAR)extends the conventional 2D images into 3D features by several acquisitions in different aspects. Compared with 3D techniques via multiple observations in elevation, e.g. SAR interferometry(InSAR) and SAR tomography(TomoSAR), holographic SAR can retrieve 3D structure by observations in azimuth. This paper focuses on designing a novel type of orbit to achieve SAR regional all-azimuth observation(AAO) for embedded targets detection and holographic 3D reconstruction. The ground tracks of the AAO orbit separate the earth surface into grids. Target in these grids can be accessed with an azimuth angle span of360°, which is similar to the flight path of airborne circular SAR(CSAR). Inspired from the successive coverage orbits of optical sensors, several optimizations are made in the proposed method to ensure favorable grazing angles, the performance of 3D reconstruction, and long-term supervision for SAR sensors. Simulation experiments show the regional AAO can be completed within five hours. In addition, a second AAO of the same area can be duplicated in two days. Finally, an airborne SAR data process result is presented to illustrate the significance of AAO in 3D reconstruction.展开更多
Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor(TFET) is considered as one of the most promising low-power devi...Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor(TFET) is considered as one of the most promising low-power devices that can simultaneously obtain low off-state current(IOFF), high on-state current(ION) and steep subthreshold swing(SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need.The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabricating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable.Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the deformation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film,which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape(TRT) is proposed. Based on the method we proposed, the MoS_(2)/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS_(2) film with the relatively high crystal quality is confirmed by atomic force microscopy(AFM), scanning electron microscopy(SEM), and Raman characterizations. Besides, the prominent negative differential resistance(NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS_(2)/Si heterojunction. The bilayer MoS_(2)/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.展开更多
AIM:To investigate the biomechanical properties and practical application of absorbable materials in orbital fracture repair.METHODS:The three-dimensional(3D)model of orbital blowout fractures was reconstructed using ...AIM:To investigate the biomechanical properties and practical application of absorbable materials in orbital fracture repair.METHODS:The three-dimensional(3D)model of orbital blowout fractures was reconstructed using Mimics21.0 software.The repair guide plate model for inferior orbital wall fracture was designed using 3-matic13.0 and Geomagic wrap 21.0 software.The finite element model of orbital blowout fracture and absorbable repair plate was established using 3-matic13.0 and ANSYS Workbench 21.0 software.The mechanical response of absorbable plates,with thicknesses of 0.6 and 1.2 mm,was modeled after their placement in the orbit.Two patients with inferior orbital wall fractures volunteered to receive single-layer and double-layer absorbable plates combined with 3D printing technology to facilitate surgical treatment of orbital wall fractures.RESULTS:The finite element models of orbital blowout fracture and absorbable plate were successfully established.Finite element analysis(FEA)showed that when the Young’s modulus of the absorbable plate decreases to 3.15 MPa,the repair material with a thickness of 0.6 mm was influenced by the gravitational forces of the orbital contents,resulting in a maximum total deformation of approximately 3.3 mm.Conversely,when the absorbable plate was 1.2 mm thick,the overall maximum total deformation was around 0.4 mm.The half-year follow-up results of the clinical cases confirmed that the absorbable plate with a thickness of 1.2 mm had smaller maximum total deformation and better clinical efficacy.CONCLUSION:The biomechanical analysis observations in this study are largely consistent with the clinical situation.The use of double-layer absorbable plates in conjunction with 3D printing technology is recommended to support surgical treatment of infraorbital wall blowout fractures.展开更多
In this paper a controller of pulse coupling feedback (PCF) is designed to control chaotic systems. Control principles and the technique to select the feedback coefficients are introduced. This controller is theoret...In this paper a controller of pulse coupling feedback (PCF) is designed to control chaotic systems. Control principles and the technique to select the feedback coefficients are introduced. This controller is theoretically studied with a three dimensional (3D) chaotic system. The artificial simulation results show that the chaotic system can be stabilized to different periodic orbits by using the PCF method, and the number of the periodic orbits are 2^n×3^m p (n and m are integers). Therefore, this control method is effective and practical.展开更多
We report 75As-nuclear magnetic resonance(NMR)and nuclear quadrupole resonance(NQR)measurements on transition-metal arsenides LaRu2As2,KCa2Fe4As4F2,and A2Cr3As3.In the superconducting state of LaRu2As2,a Hebel–Slicht...We report 75As-nuclear magnetic resonance(NMR)and nuclear quadrupole resonance(NQR)measurements on transition-metal arsenides LaRu2As2,KCa2Fe4As4F2,and A2Cr3As3.In the superconducting state of LaRu2As2,a Hebel–Slichter coherence peak is found in the temperature dependence of the spin-lattice relaxation rate 1/T1 just below Tc,which indicates that LaRu2As2 is a full-gap superperconducor.For KCa2Fe4As4F2,antiferromagnetic spin fluctuations are observed in the normal state.We further find that the anisotropy rate RAF=Tc 1/Tab 1 is small and temperature independent,implying that the low energy spin fluctuations are isotropic in spin space.Our results indicate that KCa2Fe4As4F2 is a moderately overdoped iron-arsenide high-temperature superconductor with a stoichiometric composition.For A2Cr3As3(A=Na,K,Rb,Cs),we calculate the electric field gradient by first-principle method and assign the 75As-NQR peaks to two crystallographically different As sites,paving the way for further NMR investigation.展开更多
The effects of Cr and Cr/Mn combined additions on the semi-solid microstructure of wrought Al-Mg-Si alloys are investigated.In the Cr-added alloy,the Al-7Cr compound is formed with homogeneously distributed in theα-A...The effects of Cr and Cr/Mn combined additions on the semi-solid microstructure of wrought Al-Mg-Si alloys are investigated.In the Cr-added alloy,the Al-7Cr compound is formed with homogeneously distributed in theα-Al matrix after homogenization.Both of the Al-7Cr andα-Al-(12)Mn3-Si-2 dispersiod particles are found in the homogenized microstructure of the Cr/Mn-added alloy.In the semi-solid microstructures,the smallestα-Al grains are obtained in the 60% cold-rolled alloys.After prolonged holding time,theα-Al grain size of the Cr/Mn-added alloy is smaller than that of the Cr-added alloy.Heavy deformation by cold-rolling accelerates spheroidization of theα-Al grains.The D-SSF process is found to be useful to modify the microstructures of both the Cr-added and Cr/Mn-added Al-Mg-Si alloys.展开更多
基金supported by the National Natural Science Foundation of China (62001436)the Natural Science Foundation of Jiangsu Province under (BK 20190143,JSGG20190823094603691)。
文摘Three-dimensional(3D) synthetic aperture radar(SAR)extends the conventional 2D images into 3D features by several acquisitions in different aspects. Compared with 3D techniques via multiple observations in elevation, e.g. SAR interferometry(InSAR) and SAR tomography(TomoSAR), holographic SAR can retrieve 3D structure by observations in azimuth. This paper focuses on designing a novel type of orbit to achieve SAR regional all-azimuth observation(AAO) for embedded targets detection and holographic 3D reconstruction. The ground tracks of the AAO orbit separate the earth surface into grids. Target in these grids can be accessed with an azimuth angle span of360°, which is similar to the flight path of airborne circular SAR(CSAR). Inspired from the successive coverage orbits of optical sensors, several optimizations are made in the proposed method to ensure favorable grazing angles, the performance of 3D reconstruction, and long-term supervision for SAR sensors. Simulation experiments show the regional AAO can be completed within five hours. In addition, a second AAO of the same area can be duplicated in two days. Finally, an airborne SAR data process result is presented to illustrate the significance of AAO in 3D reconstruction.
基金supported by the National Natural Science Foundation,China (No.52074131)the National Key R&D Project,China (No.2022YFC3900500)+2 种基金the International Technology Cooperation Program of Guangdong Academy of Sciences,China (No.2020GDASYL-20200504001)the Open Competition to Select the Best Candidate of Shangrao,China (No.2021A005)the BL13HB beamline of Shanghai Synchrotron Radiation Facility (SSRF)for providing synchrotron radiation beamtime (Nos.2020-SSRF-PT-011937,2021-SSRF-PT-017645).
基金Project supported by the National Natural Science Foundation of China (Grant No.61851405)。
文摘Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor(TFET) is considered as one of the most promising low-power devices that can simultaneously obtain low off-state current(IOFF), high on-state current(ION) and steep subthreshold swing(SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need.The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabricating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable.Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the deformation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film,which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape(TRT) is proposed. Based on the method we proposed, the MoS_(2)/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS_(2) film with the relatively high crystal quality is confirmed by atomic force microscopy(AFM), scanning electron microscopy(SEM), and Raman characterizations. Besides, the prominent negative differential resistance(NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS_(2)/Si heterojunction. The bilayer MoS_(2)/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.
基金Supported by the National Natural Science Foundation of China(No.82060181)General Project funded by the Jiangxi Provincial Department of Education(No.GJJ2200194).
文摘AIM:To investigate the biomechanical properties and practical application of absorbable materials in orbital fracture repair.METHODS:The three-dimensional(3D)model of orbital blowout fractures was reconstructed using Mimics21.0 software.The repair guide plate model for inferior orbital wall fracture was designed using 3-matic13.0 and Geomagic wrap 21.0 software.The finite element model of orbital blowout fracture and absorbable repair plate was established using 3-matic13.0 and ANSYS Workbench 21.0 software.The mechanical response of absorbable plates,with thicknesses of 0.6 and 1.2 mm,was modeled after their placement in the orbit.Two patients with inferior orbital wall fractures volunteered to receive single-layer and double-layer absorbable plates combined with 3D printing technology to facilitate surgical treatment of orbital wall fractures.RESULTS:The finite element models of orbital blowout fracture and absorbable plate were successfully established.Finite element analysis(FEA)showed that when the Young’s modulus of the absorbable plate decreases to 3.15 MPa,the repair material with a thickness of 0.6 mm was influenced by the gravitational forces of the orbital contents,resulting in a maximum total deformation of approximately 3.3 mm.Conversely,when the absorbable plate was 1.2 mm thick,the overall maximum total deformation was around 0.4 mm.The half-year follow-up results of the clinical cases confirmed that the absorbable plate with a thickness of 1.2 mm had smaller maximum total deformation and better clinical efficacy.CONCLUSION:The biomechanical analysis observations in this study are largely consistent with the clinical situation.The use of double-layer absorbable plates in conjunction with 3D printing technology is recommended to support surgical treatment of infraorbital wall blowout fractures.
基金Project (BG2007030) supported by High-tech Research Program of Jiangsu Province, ChinaProject (07KJA43008) supported by the Natural Science Foundation of Jiangsu Province, ChinaProject (20070299004) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
基金Project supported by the National Natural Science Foundation of China (Grant No 20373021) and Natural Science Foundation of Liaoning Province, China (Grant No 2050790).
文摘In this paper a controller of pulse coupling feedback (PCF) is designed to control chaotic systems. Control principles and the technique to select the feedback coefficients are introduced. This controller is theoretically studied with a three dimensional (3D) chaotic system. The artificial simulation results show that the chaotic system can be stabilized to different periodic orbits by using the PCF method, and the number of the periodic orbits are 2^n×3^m p (n and m are integers). Therefore, this control method is effective and practical.
基金National Natural Science Foundation of China(Grant Nos.11674377,11634015,and 11974405)the National Key R&D Program of China(Grant Nos.2017YFA0302904 and 2016YFA0300502)J.Y.also acknowledges support by the Youth Innovation Promotion Association of Chinese Academy of Sciences.
文摘We report 75As-nuclear magnetic resonance(NMR)and nuclear quadrupole resonance(NQR)measurements on transition-metal arsenides LaRu2As2,KCa2Fe4As4F2,and A2Cr3As3.In the superconducting state of LaRu2As2,a Hebel–Slichter coherence peak is found in the temperature dependence of the spin-lattice relaxation rate 1/T1 just below Tc,which indicates that LaRu2As2 is a full-gap superperconducor.For KCa2Fe4As4F2,antiferromagnetic spin fluctuations are observed in the normal state.We further find that the anisotropy rate RAF=Tc 1/Tab 1 is small and temperature independent,implying that the low energy spin fluctuations are isotropic in spin space.Our results indicate that KCa2Fe4As4F2 is a moderately overdoped iron-arsenide high-temperature superconductor with a stoichiometric composition.For A2Cr3As3(A=Na,K,Rb,Cs),we calculate the electric field gradient by first-principle method and assign the 75As-NQR peaks to two crystallographically different As sites,paving the way for further NMR investigation.
文摘The effects of Cr and Cr/Mn combined additions on the semi-solid microstructure of wrought Al-Mg-Si alloys are investigated.In the Cr-added alloy,the Al-7Cr compound is formed with homogeneously distributed in theα-Al matrix after homogenization.Both of the Al-7Cr andα-Al-(12)Mn3-Si-2 dispersiod particles are found in the homogenized microstructure of the Cr/Mn-added alloy.In the semi-solid microstructures,the smallestα-Al grains are obtained in the 60% cold-rolled alloys.After prolonged holding time,theα-Al grain size of the Cr/Mn-added alloy is smaller than that of the Cr-added alloy.Heavy deformation by cold-rolling accelerates spheroidization of theα-Al grains.The D-SSF process is found to be useful to modify the microstructures of both the Cr-added and Cr/Mn-added Al-Mg-Si alloys.