An Analytical Method to Detect the Coupling Damage Relationship of Concrete Subjected to Bending Fatigue and Temperature Actions

Based on the assumptions validated by the experiments,an analytical method to detect the coupling actions of bending fatigue and temperature on concrete was proposed.To this purpose,a coefficient denoted by f D （T）with the strain distributions caused by these two actions was defined.In terms of the known parameters and the fitted functions of strain,the explicit expression for f D （T）which develops in the way same as the law of temperature change in the body of specimens was obtained.Our experimental results indicate that the weigh fraction of temperature stress decreases in the coupling damage field with the fading temperature gradient,and consequently disclose the mutual influence between these two types of actions in the loading history.

Damage localization under ambient vibration using changes in flexibility

In recent years,Structural Health Monitoring (SHM) has emerged as a new research area in civil engineering.Most existing health monitoring methodologies require direct measurement of input excitation for implementation.However,in many cases,there is no easy way to measure these inputs-or alternatively to externally excite the structure.Therefore,SHM methods based on ambient vibration have become important in civil engineering.In this paper,an approach is proposed based on the Damage Location Vector (DLV) method to handle the ambient vibration case.Here,this flexibility-matrix-based damage localization method is combined with a modal expansion technique to eliminate the need to measure the input excitation.As a by-product of this approach,in addition to determining the location of the damage,an estimate of the damage extent also can be determined.Finally,a numerical example analyzing a truss structure with limited sensors and noisy measurement is provided to verify the efficacy of the proposed approach.

Modelling of blast-induced damage in tunnels using a hybrid finite-discrete numerical approach

This paper presents the application of a hybrid finite-discrete element method to study blast-induceddamage in circular tunnels. An extensive database of field tests of underground explosions above tunnelsis used for calibrating and validating the proposed numerical method; the numerical results areshown to be in good agreement with published data for large-scale physical experiments. The method isthen used to investigate the influence of rock strength properties on tunnel durability to withstand blastloads. The presented analysis considers blast damage in tunnels excavated through relatively weak（sandstone） and strong （granite） rock materials. It was found that higher rock strength will increase thetunnel resistance to the load on one hand, but decrease attenuation on the other hand. Thus, undercertain conditions, results for weak and strong rock masses are similar. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing

A grain-based distinct element model featuring three-dimensional （3D） Voronoi tessellations （randompoly-crystals） is proposed for simulation of crack damage development in brittle rocks. The grainboundaries in poly-crystal structure produced by Voronoi tessellations can represent flaws in intact rockand allow for numerical replication of crack damage progression through initiation and propagation ofmicro-fractures along grain boundaries. The Voronoi modelling scheme has been used widely in the pastfor brittle fracture simulation of rock materials. However the difficulty of generating 3D Voronoi modelshas limited its application to two-dimensional （2D） codes. The proposed approach is implemented inNeper, an open-source engine for generation of 3D Voronoi grains, to generate block geometry files thatcan be read directly into 3DEC. A series of Unconfined Compressive Strength （UCS） tests are simulated in3DEC to verify the proposed methodology for 3D simulation of brittle fractures and to investigate therelationship between each micro-parameter and the model＇s macro-response. The possibility of numericalreplication of the classical U-shape strength curve for anisotropic rocks is also investigated innumerical UCS tests by using complex-shaped （elongated） grains that are cemented to one another alongtheir adjoining sides. A micro-parameter calibration procedure is established for 3D Voronoi models foraccurate replication of the mechanical behaviour of isotropic and anisotropic （containing a fabric） rocks. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Mechanical responses and acoustic emission behaviors of coal under compressive differential cyclic loading(DCL):a numerical study via 3D heterogeneous particle model

The stability of coal walls(pillars)can be seriously undermined by diverse in-situ dynamic disturbances.Based on a 3D par-ticle model,this work strives to numerically replicate the major mechanical responses and acoustic emission(AE)behaviors of coal samples under multi-stage compressive cyclic loading with different loading and unloading rates,which is termed differential cyclic loading(DCL).A Weibull-distribution-based model with heterogeneous bond strengths is constructed by both considering the stress-strain relations and AE parameters.Six previously loaded samples were respectively grouped to indicate two DCL regimes,the damage mechanisms for the two groups are explicitly characterized via the time-stress-dependent variation of bond size multiplier,and it is found the two regimes correlate with distinct damage patterns,which involves the competition between stiffness hardening and softening.The numerical b-value is calculated based on the mag-nitudes of AE energy,the results show that both stress level and bond radius multiplier can impact the numerical b-value.The proposed numerical model succeeds in replicating the stress-strain relations of lab data as well as the elastic-after effect in DCL tests.The effect of damping on energy dissipation and phase shift in numerical model is summarized.

Postbuckling of Marine Stifened Composite Plates with Initial Geometric Imperfections Using Progressive Failure Analysis

This work explores the postbuckling behavior of a marine stifened composite plate in the presence of initial imperfections.The imperfection shapes are derived from buckling mode shapes and their combinations.Thereafter,these imperfection shapes are applied to the model,and nonlinear large defection fnite element and progressive failure analyses are performed in ANSYS 18.2 software.The Hashin failure criterion is employed to model the progressive failure in the stifened composite plate.The efect of the initial geometric imperfection on the stifened composite plate is investigated by considering various imperfection patterns and magnitudes.Results show that when the magnitude of the imperfection is 20 mm,the ultimate strength of the stifened composite plate decreases by 31%.Moreover,global imperfection shapes are found to be fundamental in determining the ultimate strength of stifened composite plates and their postbuckling.

A combination of damage locating vector method （DLV） and differential evolution algorithm （DE） for structural damage assessment

In this study, a two-stage method is presented for identifying multiple damage scenarios. In the first stage, the damage locating vector （DLV） method using normalized cumulative energy （nce） is employed for damage localization in structures. In the second stage, the differential evolution algorithm （DE） is used for damage severity of the structures. In addition, in the second stage, a modification of an available objective function is made for handing the issue of symmetric structures. To verify the effectiveness of the present technique, numerical examples of a 72-bar space truss and a one-span steel portal frame are considered. In addition, the effect of noise on the performance of the identification results is also investigated. The numerical results show that the proposed combination gives good assessment of damage location and extent for multiple structural damage cases.

Fracture development around deep underground excavations: Insights from FDEM modelling

Over the past twenty years, there has been a growing interest in the development of numerical modelsthat can realistically capture the progressive failure of rock masses. In particular, the investigation ofdamage development around underground excavations represents a key issue in several rock engineeringapplications, including tunnelling, mining, drilling, hydroelectric power generation, and the deepgeological disposal of nuclear waste. The goal of this paper is to show the effectiveness of a hybrid finitediscreteelement method （FDEM） code to simulate the fracturing mechanisms associated with theexcavation of underground openings in brittle rock formations. A brief review of the current state-of-theartmodelling approaches is initially provided, including the description of selecting continuum- anddiscontinuum-based techniques. Then, the influence of a number of factors, including mechanical and insitu stress anisotropy, as well as excavation geometry, on the simulated damage is analysed for threedifferent geomechanical scenarios. Firstly, the fracture nucleation and growth process under isotropicrock mass conditions is simulated for a circular shaft. Secondly, the influence of mechanical anisotropy onthe development of an excavation damaged zone （EDZ） around a tunnel excavated in a layered rockformation is considered. Finally, the interaction mechanisms between two large caverns of an undergroundhydroelectric power station are investigated, with particular emphasis on the rock mass responsesensitivity to the pillar width and excavation sequence. Overall, the numerical results indicate that FDEMsimulations can provide unique geomechanical insights in cases where an explicit consideration offracture and fragmentation processes is of paramount importance. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Numerical modeling for the coupled thermo-mechanical processes and spalling phenomena in sp Pillar Stability Experiment (APSE)

In this paper, the coupled thermo-mechanical （TM） processes in the AEspoe Pillar Stability Experiment （APSE） carried out by the Swedish Nuclear Fuel and Waste Management Company （SKB） were simulated using both continuum and discontinuum based numerical methods. Two-dimensional （2D） and three- dimensional （3D） finite element method （FEM） and 2D distinct element method （DEM） with particles were used. The main objective for the large scale in situ experiment is to investigate the yielding strength of crystalline rock and the formation of the excavation disturbed/damaged zone （EDZ） during excavation of two boreholes, pressurizing of one of the boreholes and heating. For the DEM simulations, the heat flow algorithm was newly introduced into the original code. The calculated stress, displacement and temperature distributions were compared with the ones obtained from in situ measurements and FEM simulations. A parametric study for initial microcracks was also performed to reproduce the spalling phenomena observed in the APSE.