The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detecte...The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.展开更多
Based on the general framework of ADDS( Antarctic Data Directory System) established by SCAR- COMNAP ad hoc Planning Group on Antarctic data management,the CN- ADDS( Chinese Antarctic Data Directory System) projecti...Based on the general framework of ADDS( Antarctic Data Directory System) established by SCAR- COMNAP ad hoc Planning Group on Antarctic data management,the CN- ADDS( Chinese Antarctic Data Directory System) projectis go- ing on,of which the research and activity keeps to the available method and technique in ADDS development and allows for the Chinese specific status in Antarctic data man- agementas well.Atpresent,authoring and submitting timely Antarctic data directory in China is one of the key issuesthatisto be dealtwith necessarily.This paper aims at studying the technical procedure in collecting,processing,examining and submitting data directory. In additional,italso discusses the efficient collection of data directory, which needs the effort of administrative and technical support.展开更多
In this paper we describe a system used to control,collect and process data in an 8 mm portable microwave radiometer scatterometer .We focus on hardware and software design of the system based on a PIC16F874 chip. T...In this paper we describe a system used to control,collect and process data in an 8 mm portable microwave radiometer scatterometer .We focus on hardware and software design of the system based on a PIC16F874 chip. The system has been successfully used in an 8 mm portable microwave radiometer scatterometer. Compared with other similar systems, the system modularization, miniaturization and intelligentization are improved so as to meet portable instrument requirements.展开更多
Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifun...Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.展开更多
Nowadays, billions of IoT devices, e.g., sensors and RFIDs, arise around us providing not only computingintensive, but also delaysensitive services, ranging from augmentedirtual realities to distributed data analysis ...Nowadays, billions of IoT devices, e.g., sensors and RFIDs, arise around us providing not only computingintensive, but also delaysensitive services, ranging from augmentedirtual realities to distributed data analysis and artificia intelligence. Unfortunately, in many application scenarios, the low response latency for IoT services are achieved at the cost of computing-complexity that far exceeds the capabilities of IoT devices. To feed this trend, multiple computing paradigms emerge, such as mobile transparent computing, edge computing, fog computing and big data analytics based framework. These paradigms employ more resourceful edge devices, e.g., smallscale servers, smart phones and laptops, to assist the low-end IoT devices. By offloading the computing-intensive tasks to the edge devices, it is expected to converge the data collection at IoT devices and the data processing at edge devices to provision computing-intensive and delay-sensitive services. However, lots of issues remain in the application of edge computing which impede its flourish in IoTs.展开更多
基金Supported by the National Natural Science Foundation of China
文摘The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.
文摘Based on the general framework of ADDS( Antarctic Data Directory System) established by SCAR- COMNAP ad hoc Planning Group on Antarctic data management,the CN- ADDS( Chinese Antarctic Data Directory System) projectis go- ing on,of which the research and activity keeps to the available method and technique in ADDS development and allows for the Chinese specific status in Antarctic data man- agementas well.Atpresent,authoring and submitting timely Antarctic data directory in China is one of the key issuesthatisto be dealtwith necessarily.This paper aims at studying the technical procedure in collecting,processing,examining and submitting data directory. In additional,italso discusses the efficient collection of data directory, which needs the effort of administrative and technical support.
文摘In this paper we describe a system used to control,collect and process data in an 8 mm portable microwave radiometer scatterometer .We focus on hardware and software design of the system based on a PIC16F874 chip. The system has been successfully used in an 8 mm portable microwave radiometer scatterometer. Compared with other similar systems, the system modularization, miniaturization and intelligentization are improved so as to meet portable instrument requirements.
文摘Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.
文摘Nowadays, billions of IoT devices, e.g., sensors and RFIDs, arise around us providing not only computingintensive, but also delaysensitive services, ranging from augmentedirtual realities to distributed data analysis and artificia intelligence. Unfortunately, in many application scenarios, the low response latency for IoT services are achieved at the cost of computing-complexity that far exceeds the capabilities of IoT devices. To feed this trend, multiple computing paradigms emerge, such as mobile transparent computing, edge computing, fog computing and big data analytics based framework. These paradigms employ more resourceful edge devices, e.g., smallscale servers, smart phones and laptops, to assist the low-end IoT devices. By offloading the computing-intensive tasks to the edge devices, it is expected to converge the data collection at IoT devices and the data processing at edge devices to provision computing-intensive and delay-sensitive services. However, lots of issues remain in the application of edge computing which impede its flourish in IoTs.
基金supported by the Project supported by the Jiangsu Province Carbon Peak Carbon Neutral Technology Innovation Project in China(BE2022034)the Sinopec Science and Technology Research Project(No.P21079-3 and No.P22090)the Shengli Oilfi eld Company Science and Technology Research Project(No.YKS2201).
