Statistical analysis of geomagnetic field variations during the partial solar eclipse on 2011 January 4 in Turkey

Some geophysical parameters, such as those related to gravitation and the geomagnetic field, could change during solar eclipses. In order to observe geomagnetic fluctuations, geomagnetic measurements were carded out in a limited time frame during the partial solar eclipse that occurred on 2011 January 4 and was observed in Canakkale and Ankara, Turkey. Additionally, records of the geomagnetic field spanning 24 hours, obtained from another observatory （in Iznik, Turkey）, were also analyzed to check for any peculiar variations. In the data processing stage, a polynomial fit, following the application of a running average routine, was applied to the geomagnetic field data sets. Geomagnetic field data sets indicated there was a characteristic decrease at the beginning of the solar eclipse and this decrease can be well-correlated with previous geomagnetic field measurements that were taken during the total solar eclipse that was observed in Turkey on 2006 March 29. The behavior of the geomagnetic field is also consistent with previous observations in the literature. As a result of these analyses, it can be suggested that eclipses can cause a shielding effect on the geomagnetic field of the Earth.

Cryo-EM Data Statistics and Theoretical Analysis of KaiC Hexamer

Cryo-electron microscopy(cryo-EM) provides a powerful tool to resolve the structure of biological macromolecules in natural state. One advantage of cryo-EM technology is that different conformation states of a protein complex structure can be simultaneously built, and the distribution of different states can be measured. This provides a tool to push cryo-EM technology beyond just to resolve protein structures, but to obtain the thermodynamic properties of protein machines. Here, we used a deep manifold learning framework to get the conformational landscape of Kai C proteins, and further obtained the thermodynamic properties of this central oscillator component in the circadian clock by means of statistical physics.

On the non-Gaussian errors in high-z supernovae type Ia data

The nature of random errors in any data set is Gaussian, which is a well established fact according to the Central Limit Theorem. Supernovae type Ia data have played a crucial role in major discoveries in cosmology. Unlike in laboratory experiments, astronomical measurements cannot be performed in controlled situations. Thus, errors in astronomical data can be more severe in terms of systematics and non-Gaussianity compared to those of laboratory experiments. In this paper, we use the Kolmogorov-Smiruov statistic to test non-Gaussianity in high-z supernovae data. We apply this statistic to four data sets, i.e., Gold data （2004）, Gold data （2007）, the Union2 catalog and the Union2.1 data set for our analysis. Our results show that in all four data sets the errors are consistent with a Gaussian distribution.

Spectral Synthesis via Mean Field approach to Independent Component Analysis

We apply a new statistical analysis technique, the Mean Field approach to Independent Component Analysis（MF-ICA） in a Bayseian framework, to galaxy spectral analysis. This algorithm can compress a stellar spectral library into a few Independent Components（ICs）, and the galaxy spectrum can be reconstructed by these ICs. Compared to other algorithms which decompose a galaxy spectrum into a combination of several simple stellar populations, the MF-ICA approach offers a large improvement in efficiency. To check the reliability of this spectral analysis method, three different methods are used：（1） parameter recovery for simulated galaxies,（2） comparison with parameters estimated by other methods, and（3） consistency test of parameters derived with galaxies from the Sloan Digital Sky Survey. We find that our MF-ICA method can not only fit the observed galaxy spectra efficiently, but can also accurately recover the physical parameters of galaxies. We also apply our spectral analysis method to the DEEP2 spectroscopic data, and find it can provide excellent fitting results for low signal-to-noise spectra.

A STATISTICAL ANALYSIS OF SODAR DATA DETECTED IN YANSHAN MOUNTAIN AREA,BEIJING

According to the characteristics of sodar echo,a classified method for temperature stratification is given. By using sodar data observed in Yanshan Mountain area in Beijing,the statistical characteristics for the height of inversion layer,thermal plume,and the depth of mixed layer are compared.Finally,the appearance frequency for stable,unstable and neutral stratification is analyzed.

Learning Vector Quantization for Classifying Astronomical Objects

The sizes of astronomical surveys in different wavebands are increasing rapidly. Therefore, automatic classification of objects is becoming ever more important. We explore the performance of learning vector quantization (LVQ) in classifying multi-wavelength data. Our analysis concentrates on separating active sources from non-active ones. Different classes of X-ray emitters populate distinct regions of a multidimensional parameter space. In order to explore the distribution of various objects in a multidimensional parameter space, we positionally cross-correlate the data of quasars, BL Lacs, active galaxies, stars and normal galaxies in the optical, X-ray and infrared bands. We then apply LVQ to classify them with the obtained data. Our results show that LVQ is an effective method for separating AGNs from stars and normal galaxies with multi-wavelength data.

Identifying Carbon stars from the LAMOST pilot survey with the efficient manifold ranking algorithm

Carbon stars are excellent kinematic tracers of galaxies and can serve as a viable standard candle, so it is worthwhile to automatically search for them in a large amount of spectra. In this paper, we apply the efficient manifold ranking algorithm to search for carbon stars from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope （LAMOST） pilot survey, whose performance and robustness are verified comprehensively with four test experiments. Using this algorithm, we find a total of 183 carbon stars, and 158 of them are new findings. According to different spectral features, our carbon stars are classified as 58 C-H stars, 11 C-H star candidates, 56 C-R stars, ten C-R star candidates, 30 C-N stars, three C-N star candidates, and four C-J stars. There are also ten objects which have no spectral type because of low spec- tral quality, and a composite spectrum consisting of a white dwarf and a carbon star. Applying the support vector machine algorithm, we obtain the linear optimum clas- sification plane in the J - H versus/-/- Ks color diagram which can be used to distinguish C-H from C-N stars with their J - H and H - Ks colors. In addition, we identify 18 dwarf carbon stars with their relatively high proper motions, and find three carbon stars with FUV detections likely have optical invisible companions by cross matching with data from the Galaxy Evolution Explorer. In the end, we detect four variable carbon stars with the Northern Sky Variability Survey, the Catalina Sky Survey and the LINEAR variability databases. According to their periods and ampli- tudes derived by fitting light curves with a sinusoidal function, three of them are likely semiregular variable stars and one is likely a Mira variable star.

Investigation of intergranular bright points from the New Vacuum Solar Telescope

Six high-resolution TiO-band image sequences from the New Vacuum Solar Telescope （NVST） are used to investigate the properties of intergranular bright points （igBPs）. We detect the igBPs using a Laplacian and morphological dilation algorithm （LMD） and automatically track them using a three- dimensional segmentation algorithm, and then investigate the morphologic, photometric and dynamic prop- erties of igBPs in terms of equivalent diameter, intensity contrast, lifetime, horizontal velocity, diffusion index, motion range and motion type. The statistical results confirm previous studies based on G-band or TiO-band igBPs from other telescopes. These results illustrate that TiO data from the NVST are stable and reliable, and are suitable for studying igBPs. In addition, our method is feasible for detecting and track- ing igBPs with TiO data from the NVST. With the aid of vector magnetograms obtained from the Solar Dynamics Observatory/Helioseismic and Magnetic Imager, the properties of igBPs are found to be strongly influenced by their embedded magnetic environments. The areal coverage, size and intensity contrast values of igBPs are generally larger in regions with higher magnetic flux. However, the dynamics of igBPs, includ- ing the horizontal velocity, diffusion index, ratio of motion range and index of motion type are generally larger in the regions with lower magnetic flux. This suggests that the absence of strong magnetic fields in the medium makes it possible for the igBPs to look smaller and weaker, diffuse faster, and move faster and further along a straighter path.

The Ontology of Biological and Clinical Statistics （OBCS）-based statistical method standardization and meta-analysis of host responses to yellow fever vaccines

Background： The community-based Ontology of Biological and Clinical Statistics （OBCS） represents and standardizes biological and clinical data and statistical methods. Methods： Both OBCS and the Vaccine Ontology （VO） were used to ontologically model various components and relations in a typical host response to vaccination study. Such a model was then applied to represent and compare three microarray studies of host responses to the yellow fever vaccine YF-17D. A literature meta-analysis was then conducted to survey yellow fever vaccine response papers and summarize statistical methods, using OBCS. Results： A general ontological model was developed to identify major components in a typical host response to vaccination. Our ontology modeling of three similar studies identified common and different components which may contribute to varying conclusions. Although these three studies all used the same vaccine, human blood samples, similar sample collection time post vaccination, and microarray assays, statistically differentially expressed genes and associated gene functions differed, likely due to the differences in specific variables （e.g., microarray type and human variations）. Our manual annotation of 95 papers in human responses to yellow fever vaccines identified 38 data analysis methods. These statistical methods were consistently represented and classified with OBCS. Eight statistical methods not available in existing ontologies were added to OBCS. Conclusions： The study represents the first single use case of applying OBCS ontology to standardize, integrate, and use biomedical data and statistical methods. Our ontology-based meta-analysis showed that different experimental results might be due to different experimental assays and conditions, sample variations, and data analysis methods.

Investigating Evacuation Trends and Restoration Processes from Serious Earthquake Damage in Japan

Japan has experienced many large-scale natural disasters, such as earthquakes, typhoons accompanied by heavy rain, and landslides. Based on data for the damage caused by four recent major earthquakes in Japan, we investigate the trends in the number of evacuees and evacuation centres after these disasters as well as the restoration processes for public utilities such as electricity, gas, water, and communication lines. We compare the restoration speeds and trends of the damaged infrastructure systems. We also propose various mathematical models to approximate the recovery trends using both evacuee-related data and damage recovery process data. These results can be used to design natural disaster mitigation policies not only in Japan, but also in other countries. The results of various statistical data analyses and mathematical modelling techniques are applied to provide policy suggestions.

A convergent mean shift algorithm to select targets for LAMOST

This paper firstly finds that the Mean Shift Algorithm used by the Observation Control System （OCS） Research Group of the University of Science and Technology of China in Survey Strategy System 2.10 （SSS2.10） to select targets for the Large Sky Area Multi-Object Fiber Spectroscopic Telescope （LAMOST） is not convergent in theory. By carefully studying the mathematical formulation of the Mean Shift Algorithm, we find that it tries to find a point where some objective function achieves its maximum value; the Mean Shift Vector can be regarded as the ascension direction for the objective function. If we regard the objective function as the numerical description for the imaging quality of all targets covered by the focal panel, then the Mean Shift Algorithm can find the place where the imaging quality is the best. So, the problem of selecting targets is equal to the problem of finding the place where the imaging quality is the best. In addition, we also give some effective heuristics to improve computational speed and propose an effective method to assign point sources to the respective fibers. As a result, our program runs fast, and it costs only several seconds to generate an observation.

A Comparison of BBN,ADTree and MLP in separating Quasars from Large Survey Catalogues

We compare the performance of Bayesian Belief Networks （BBN）, Multilayer Perception （MLP） networks and Alternating Decision Trees （ADtree） on separating quasars from stars with the database from the 2MASS and FIRST survey catalogs. Having a training sample of sources of known object types, the classifiers are trained to separate quasars from stars. By the statistical properties of the sample, the features important for classifica- tion are selected. We compare the classification results with and without feature selection. Experiments show that the results with feature selection are better than those without feature selection. From the high accuracy found, it is concluded that these automated methods are robust and effective for classifying point sources. They may all be applied to large survey projects （e.g. selecting input catalogs） and for other astronomical issues, such as the parameter measurement of stars and the redshift estimation of galaxies and quasars.

A fast Stokes inversion technique based on quadratic regression

Stokes inversion calculation is a key process in resolving polarization information on radiation from the Sun and obtaining the associated vector magnetic fields. Even in the cases of simple local thermo- dynamic equilibrium （LTE） and where the Milne-Eddington approximation is valid, the inversion problem may not be easy to solve. The initial values for the iterations are important in handling the case with mul- tiple minima. In this paper, we develop a fast inversion technique without iterations. The time taken for computation is only 1/100 the time that the iterative algorithm takes. In addition, it can provide available initial values even in cases with lower spectral resolutions. This strategy is useful for a filter-type Stokes spectrograph, such as SDO/HMI and the developed two-dimensional real-time spectrograph （2DS）.

On the Lorentz factor of superluminal sources

We investigate the properties of features seen within superluminal sources often referred to as components. Our result indicates a fairly strong correlation of r ～ 0.5 for quasars, r ～ 0.4 for galaxies and r ～ 0.7 for BL Lac objects in our sam- ple between component sizes and distances from the stationary core. The assumption of free adiabatic expanding plasma enables us to constrain the Lorentz factor for su- perluminal sources. Our estimated Lorentz factor of y ～ 9-13 for quasars, 7 ～ 7-11 for galaxies and y～ 4 - 9 for BL Lac objects indicates that BL Lacs have the lowest range of Lorentz factors.

DWT Power Spectrum of the Two-Degree Field Galaxy Redshift Survey

The power spectrum of the two-degree Field Galaxy Redshift Survey （2dFGRS） sample is estimated with the discrete wavelet transform （DWT） method. The DWT power spectra within 0.035 〈 k 〈 2.2 h Mpc^-1 are measured for three volume-limited samples defined in consecutive absolute magnitude bins - 19 - - 18, - 20 - - 19 and - 21 - - 20. We show that the DWT power spectrum can effectively distinguish ACDM models of σ8 = 0.84 and σ8 = 0.74. We adopt maximum likelihood method to perform three-parameter fitting of the bias parameter b, pairwise velocity dispersion σpv and redshift distortion parameterβ = Ωm^0.6/b to the measured DWT power spectrum. The fitting results state that in a σ8 = 0.84 universe the best-fit values of Ωm given by the three samples are mutually consistent within the range 0.28 - 0.36, and the best fitted values of Opv are 398-27^＋35, 475-29^37 and 550 ± 20 km s^-1 for the three samples, respectively. In the model of σ8 = 0.74, our three samples give very different values of Ωm. We repeated the fitting using the empirical formula of redshift distortion. The result of the model of low σ8 is still poor, especially, one of the best-fit values of σpv is as large as 10^3 km s^-1. We also repeated our fitting by incorporating a scale-dependent galaxy bias. This gave a slightly lower value of Ωm. Differences between the models of σ8 = 0.84 and σ8 = 0.74 still exist in the fitting results. The power spectrum of 2dFGRS seems to disfavor models with low amplitude of density fluctuations if the bias parameter is assumed to be scale independent. For the fitting value of Ωm to be consistent with that given by WMAP3, strong scale dependence of the bias parameters is needed.

Candidate members of star clusters from LAMOST DR2

In this work, we provide 2189 photometrically- and kinematically-selected candidate members of 24 star clusters from the LAMOST DR2 catalog. We perform two-step membership identification： selection along the stellar track in the colormagnitude diagram, i.e., photometric identification, and selection from the distribution of radial velocities, i.e. the kinematic identification. We find that the radial velocities from the LAMOST data are very helpful in the membership identification. The mean probability of membership is 40% for the sample selected with radial velocity. With these 24 star clusters, we investigate the performance of the radial velocity and metallicity estimated with the LAMOST pipeline. We find that the systematic offsets in radial velocity and metallicity are 0.85 ± 1.26 km s-1and-0.08 ± 0.04 dex, with dispersions of 5.47＋1.16-0.71 km s-1and 0.13＋0.04-0.02 dex, respectively. Finally, we propose that the photometrically-selected candidate members of the clusters covered by the LAMOST footprint should be assigned higher priority so that more candidate stars can be observed.

Ship speed power performance under relative wind profiles in relation to sensor fault detection

Statistical data analysis and visualization approaches to identify ship speed power performance under relative wind(i.e.apparent wind)profiles are considered in this study.Ship performance and navigation data of a selected vessel are analyzed,where various data anomalies,i.e.sensor related erroneous data conditions,are identified.Those erroneous data conditions are investigated and several approaches to isolate such situations are also presented by considering appropriate data visualization methods.Then,the cleaned data are used to derive various relationships among ship performance and navigation parameters that have been visualized in this study,appropriately.The results show that the wind profiles along ship routes can be used to evaluate vessel performance and navigation conditions by assuming the respective sea states relate to their wind conditions.Hence,the results are useful to derive appropriate mathematical models that represent ship performance and navigation conditions.Such mathematical models can be used for weather routing type applications(i.e.voyage planning),where the respective weather forecast can be used to derive optimal ship routes to improve vessel performance and reduce fuel consumption.This study presents not only an overview of statistical data analysis of ship performance and navigation data but also the respective challenges in data anomalies(i.e.erroneous data intervals and sensor faults)due to onboard sensors and data handling systems.Furthermore,the respective solutions to such challenges in data quality have also been presented by considering data visualization approaches.