Since flight accidents due to aircraft icing occur from time to time,this paper proposes an array of impact rod-type plasma synthetic jet de-icing methods for aircraft icing problems.The impact rod-type plasma synthet...Since flight accidents due to aircraft icing occur from time to time,this paper proposes an array of impact rod-type plasma synthetic jet de-icing methods for aircraft icing problems.The impact rod-type plasma synthetic jet actuator(PSJA)is based on the traditional PSJA with an additional impact rod structure for better de-icing in the flight environment.In this work,we first optimize the ice-breaking performance of a single-impact rod-type PSJA,and then conduct an array of impact rod-type plasma synthetic jet ice-breaking experiments to investigate the relationship between crack expansion and discharge energy,ice thickness and group spacing.The results show that the impact force and impulse of a single-impact rod-type PSJA are proportional to the discharge energy,and there exists a threshold energy Qmin for a single actuator to break the ice,which is proportional to the ice thickness.Only when the discharge energy reaches above Qmin can the ice layer produce cracks,and at the same time,the maximum radial crack length produced during the ice-breaking process is proportional to the discharge energy.When the ice is broken by an array of impact rod PSJAs,the discharge energy and group spacing together determine whether the crack can be extended to the middle region of the actuator.When the group spacing is certain,increasing the energy can increase the intersection of cracks in the middle region,and the ice-fragmentation degree is increased and the ice-breaking effect is better.At the same time,the energy estimation method of ice breaking by an array of impact rod-type PSJAs is proposed according to the law when a single actuator is breaking ice.展开更多
BACKGROUND The emergency department(ED)plays a critical role in establishing artificial airways and implementing mechanical ventilation.Managing airbags in the ED presents a prime opportunity to mitigate the risk of v...BACKGROUND The emergency department(ED)plays a critical role in establishing artificial airways and implementing mechanical ventilation.Managing airbags in the ED presents a prime opportunity to mitigate the risk of ventilator-associated pneumonia.Nonetheless,existing research has largely overlooked the understanding,beliefs,and practical dimensions of airway airbag management among ED nurses,with a predominant focus on intensive care unit nurses.AIM To investigate the current status of ED nurses'knowledge,beliefs,and practical behaviors in airway airbag management and their influencing factors.METHODS A survey was conducted from July 10th to August 10th,2023,using convenience sampling on 520 ED nurses from 15 tertiary hospitals and 5 sary hospitals in Shanghai.Pathway analysis was utilized to analyze the influencing factors.RESULTS The scores for ED nurses'airway airbag management knowledge were 60.26±23.00,belief was 88.65±13.36,and behavior was 75.10±19.84.The main influencing factors of airbag management knowledge included participation in specialized nurse or mechanical ventilation training,department,and work experience in the department.Influencing factors of airbag management belief comprised knowledge,department,and participation in specialized nurse or mechanical ventilation training.Primary influencing factors of airbag management behavior included knowledge,belief,department,participation in specialized nurse or mechanical ventilation training,and professional title.The belief in airbag management among ED nurses acted as a partial mediator between knowledge and behavior,with a total effect value of 0.513,and an indirect effect of 0.085,constituting 16.6%of the total effect.CONCLUSION ED nurses exhibit a positive attitude toward airbag management with relatively standardized practices,yet there remains room for improvement in their knowledge levels.Nursing managers should implement interventions tailored to the characteristics of ED nurses'airbag management knowledge,beliefs,and practices to enhance their airbag management proficiency.展开更多
Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting...Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting, and the advantages and disadvantages of each approach are discussed here, including environmental and structural damage caused by corrosive snow melting agents. New developments in chemical melting agents and mechanical equipment are discussed, and an overview of alternative thermal melting systems is presented, including the use of geothermy and non-geothermal heating systems utilizing solar energy, electricity, conductive pavement materials, and infrared/microwave applications. Strategic recommendations are made for continued enhancement of public safety in snow and ice conditions.展开更多
De-icing technology has become an increasingly important subject in numerous applications in recent years.However,the direct numerical modeling and simulation the physical process of thermomechanical deicing is limite...De-icing technology has become an increasingly important subject in numerous applications in recent years.However,the direct numerical modeling and simulation the physical process of thermomechanical deicing is limited.This work is focusing on developing a numerical model and tool to direct simulate the de-icing process in the framework of the coupled thermo-mechanical peridynamics theory.Here,we adopted the fully coupled thermo-mechanical bond-based peridynamics(TM-BB-PD)method for modeling and simulation of de-icing.Within the framework of TM-BB-PD,the ice constitutive model is established by considering the influence of the temperature difference between two material points,and a modified failure criteria is proposed,which takes into account temperature effect to predict the damage of quasi-brittle ice material.Moreover,thermal boundary condition is used to simulate the thermal load in the de-icing process.By comparing with the experimental results and the previous reported finite element modeling,our numerical model shows good agreement with the previous predictions.Based on the numerical results,we find that the developed method can not only predict crack initiation and propagation in the ice,but also predict the temperature distribution and heat conduction during the de-icing process.Furthermore,the influence of the temperature for the ice crack growth pattern is discussed accordingly.In conclusion,the coupled thermal-mechanical peridynamics formulation with modified failure criterion is capable of providing a modeling tool for engineering applications of de-icing technology.展开更多
In order to prevent severe pollution by de-icing salt on greenery along urban roads, a half lethal dose （LD_50）for a plant population was confirmed through stress simulation of chloride de-icing salt on Euonymus jap...In order to prevent severe pollution by de-icing salt on greenery along urban roads, a half lethal dose （LD_50）for a plant population was confirmed through stress simulation of chloride de-icing salt on Euonymus japonicus, with an ianalysis of physiological changes, statistics on mortality rate on plant populations and mathematic modeling during a 30- day subacute toxicity test. The results indicate that a significant positive correlation in the early stages and a significant negative correlation in the later stages were observed between the amount of chlorophyll a and b in plants and a cumulative dose of de-icing salt. The amounts of free proline in plants and the dose of de-icing salt were positively correlated Over the entire period. No significant correlation in the initial stage, but a significant negative correlation in later stages was observed between the soluble protein and the dose of de-icing salt. LDs0 of this chloride agent on E. japonicus is 5 kg.（L·m2）-1 over 30 days.展开更多
This paper presents a self-structured organizing single-input control system based on differentiable cerebellar model articulation controller (CMAC) for an n-link robot manipulator to achieve the high-precision positi...This paper presents a self-structured organizing single-input control system based on differentiable cerebellar model articulation controller (CMAC) for an n-link robot manipulator to achieve the high-precision position tracking. In the proposed scheme, the single-input CMAC controller is solely used to control the plant, so the input space dimension of CMAC can be simplified and no conventional controller is needed. The structure of single-input CMAC will also be self-organized;that is, the layers of single-input CMAC will grow or prune systematically and their receptive functions can be automatically adjusted. The online tuning laws of single-input CMAC parameters are derived in gradient-descent learning method and the discrete-type Lyapunov function is applied to determine the learning rates of the proposed control system so that the stability of the system can be guaranteed. The simulation results of three-link De-icing robot manipulator are provided to verify the effectiveness of the proposed control methodology.展开更多
中国新车评价规程(Chinese new car assessment programme,C-NCAP)2024版乘员保护板块中新增了侧面碰撞远端乘员保护的虚拟测评项目,但是当前车辆的被动安全系统尚没有达到该评价规程要求.针对该现状,提出了在远端乘员侧添加远端气囊的...中国新车评价规程(Chinese new car assessment programme,C-NCAP)2024版乘员保护板块中新增了侧面碰撞远端乘员保护的虚拟测评项目,但是当前车辆的被动安全系统尚没有达到该评价规程要求.针对该现状,提出了在远端乘员侧添加远端气囊的解决方案,建立了远端气囊有限元模型,并进行了试验对标.首先,运用CATIA软件建立远端气囊的三维模型,利用HyperMesh对气囊模型进行几何清理及网格划分;其次,采用Primer软件折叠划分好网格的气囊有限元模型,设置远端气囊的材料属性及模型参数,应用LS-DYNA软件进行运算求解;最后,根据静态点爆与动态冲击试验结果对标远端气囊有限元模型.结果表明,静态点爆试验对标误差为1.4%,动态冲击试验对标误差在10%以内,符合新规要求.展开更多
This paper proposes a numerical method to analyze the ice protection capability and predict the power requirements of a piezoelectric resonant de-icing system.The method is based on a coupled electro-mechanical finite...This paper proposes a numerical method to analyze the ice protection capability and predict the power requirements of a piezoelectric resonant de-icing system.The method is based on a coupled electro-mechanical finite element analysis which enables the fast computation of the modes of resonance of interest to de-ice curved surfaces and the estimation of the input voltage and current required for a given configuration(defined by its mode,actuator location,ice deposit,etc.).Eventually,the electric power to be supplied can be also assessed.The method is applied to a NACA 0024 leading edge equipped with piezoelectric actuators.First,two extension modes are analyzed and compared with respect to their efficiency and power requirements.Then,tests are carried out in an icing tunnel to verify the effectiveness of the piezoelectric ice protection system and the predictions of the maximal required power.The system allows de-icing the leading edge in less than 2 s for a glaze ice deposit.展开更多
A novel DC traction power supply system suitable for energy feeding and de-icing is proposed in this paper for an urban rail transit catenary on the basis of the full bridge submodule (FBSM) modular multilevel convert...A novel DC traction power supply system suitable for energy feeding and de-icing is proposed in this paper for an urban rail transit catenary on the basis of the full bridge submodule (FBSM) modular multilevel converter (MMC). The FBSM-MMC is a novel type of voltage source converter (VSC) and can directly control the output DC voltage and conduct bipolar currents, thus flexibly controlling the power flow of the urban rail transit catenary. The proposed topology can overcome the inherent disadvantages of the output voltage drop in the diode rectifier units, increase the power supply distance and reduce the number of traction substations. The flexible DC technology can coordinate multiple FBSM-MMCs in a wide area and jointly complete the bidirectional control of catenary power flow during the operation of the electric locomotive, so as to realize the local consumption and optimal utilization of the recovered braking energy of the train. In addition, the FBSM-MMCs can also adjust the output current when the locomotive is out of service to prevent the catenary from icing in winter. The working modes of the proposed topology are illustrated in detail and the control strategy is specially designed for normal locomotive operations and catenary de-icing. Simulation cases conducted by PSCAD/EMTDC validate the proposed topology and its control strategy.展开更多
基金financially supported by National Natural Science Foundation of China(No.12002384)National Key Laboratory Foundation of China(No.614220220200107)+1 种基金National Science and Technology Major Project of China(No.J2019-II-0014-0035)Academician Workstation F0undation of the Green Aerotechnics Research Institute of Chongqing Jiaotong University(No.GATRI2020C06003)。
文摘Since flight accidents due to aircraft icing occur from time to time,this paper proposes an array of impact rod-type plasma synthetic jet de-icing methods for aircraft icing problems.The impact rod-type plasma synthetic jet actuator(PSJA)is based on the traditional PSJA with an additional impact rod structure for better de-icing in the flight environment.In this work,we first optimize the ice-breaking performance of a single-impact rod-type PSJA,and then conduct an array of impact rod-type plasma synthetic jet ice-breaking experiments to investigate the relationship between crack expansion and discharge energy,ice thickness and group spacing.The results show that the impact force and impulse of a single-impact rod-type PSJA are proportional to the discharge energy,and there exists a threshold energy Qmin for a single actuator to break the ice,which is proportional to the ice thickness.Only when the discharge energy reaches above Qmin can the ice layer produce cracks,and at the same time,the maximum radial crack length produced during the ice-breaking process is proportional to the discharge energy.When the ice is broken by an array of impact rod PSJAs,the discharge energy and group spacing together determine whether the crack can be extended to the middle region of the actuator.When the group spacing is certain,increasing the energy can increase the intersection of cracks in the middle region,and the ice-fragmentation degree is increased and the ice-breaking effect is better.At the same time,the energy estimation method of ice breaking by an array of impact rod-type PSJAs is proposed according to the law when a single actuator is breaking ice.
文摘BACKGROUND The emergency department(ED)plays a critical role in establishing artificial airways and implementing mechanical ventilation.Managing airbags in the ED presents a prime opportunity to mitigate the risk of ventilator-associated pneumonia.Nonetheless,existing research has largely overlooked the understanding,beliefs,and practical dimensions of airway airbag management among ED nurses,with a predominant focus on intensive care unit nurses.AIM To investigate the current status of ED nurses'knowledge,beliefs,and practical behaviors in airway airbag management and their influencing factors.METHODS A survey was conducted from July 10th to August 10th,2023,using convenience sampling on 520 ED nurses from 15 tertiary hospitals and 5 sary hospitals in Shanghai.Pathway analysis was utilized to analyze the influencing factors.RESULTS The scores for ED nurses'airway airbag management knowledge were 60.26±23.00,belief was 88.65±13.36,and behavior was 75.10±19.84.The main influencing factors of airbag management knowledge included participation in specialized nurse or mechanical ventilation training,department,and work experience in the department.Influencing factors of airbag management belief comprised knowledge,department,and participation in specialized nurse or mechanical ventilation training.Primary influencing factors of airbag management behavior included knowledge,belief,department,participation in specialized nurse or mechanical ventilation training,and professional title.The belief in airbag management among ED nurses acted as a partial mediator between knowledge and behavior,with a total effect value of 0.513,and an indirect effect of 0.085,constituting 16.6%of the total effect.CONCLUSION ED nurses exhibit a positive attitude toward airbag management with relatively standardized practices,yet there remains room for improvement in their knowledge levels.Nursing managers should implement interventions tailored to the characteristics of ED nurses'airbag management knowledge,beliefs,and practices to enhance their airbag management proficiency.
基金supported by the National Natural Science Fund of China(No.41121061)the National Key Basic Research and Development Program(No.2012CB026102)the Fund of the "Hundred People Plan" of CAS(to WenBing Yu)
文摘Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting, and the advantages and disadvantages of each approach are discussed here, including environmental and structural damage caused by corrosive snow melting agents. New developments in chemical melting agents and mechanical equipment are discussed, and an overview of alternative thermal melting systems is presented, including the use of geothermy and non-geothermal heating systems utilizing solar energy, electricity, conductive pavement materials, and infrared/microwave applications. Strategic recommendations are made for continued enhancement of public safety in snow and ice conditions.
基金the University of California at Berkeley.Ms.Y.Song gratefully acknowledges the financial support from the Chinese Scholar Council(CSC Grant No.201706680094).
文摘De-icing technology has become an increasingly important subject in numerous applications in recent years.However,the direct numerical modeling and simulation the physical process of thermomechanical deicing is limited.This work is focusing on developing a numerical model and tool to direct simulate the de-icing process in the framework of the coupled thermo-mechanical peridynamics theory.Here,we adopted the fully coupled thermo-mechanical bond-based peridynamics(TM-BB-PD)method for modeling and simulation of de-icing.Within the framework of TM-BB-PD,the ice constitutive model is established by considering the influence of the temperature difference between two material points,and a modified failure criteria is proposed,which takes into account temperature effect to predict the damage of quasi-brittle ice material.Moreover,thermal boundary condition is used to simulate the thermal load in the de-icing process.By comparing with the experimental results and the previous reported finite element modeling,our numerical model shows good agreement with the previous predictions.Based on the numerical results,we find that the developed method can not only predict crack initiation and propagation in the ice,but also predict the temperature distribution and heat conduction during the de-icing process.Furthermore,the influence of the temperature for the ice crack growth pattern is discussed accordingly.In conclusion,the coupled thermal-mechanical peridynamics formulation with modified failure criterion is capable of providing a modeling tool for engineering applications of de-icing technology.
基金financially supported by the Science Innovation Project of Beijing Forestry University (No. 101305)the 985 Innovation Platform, China
文摘In order to prevent severe pollution by de-icing salt on greenery along urban roads, a half lethal dose （LD_50）for a plant population was confirmed through stress simulation of chloride de-icing salt on Euonymus japonicus, with an ianalysis of physiological changes, statistics on mortality rate on plant populations and mathematic modeling during a 30- day subacute toxicity test. The results indicate that a significant positive correlation in the early stages and a significant negative correlation in the later stages were observed between the amount of chlorophyll a and b in plants and a cumulative dose of de-icing salt. The amounts of free proline in plants and the dose of de-icing salt were positively correlated Over the entire period. No significant correlation in the initial stage, but a significant negative correlation in later stages was observed between the soluble protein and the dose of de-icing salt. LDs0 of this chloride agent on E. japonicus is 5 kg.（L·m2）-1 over 30 days.
文摘This paper presents a self-structured organizing single-input control system based on differentiable cerebellar model articulation controller (CMAC) for an n-link robot manipulator to achieve the high-precision position tracking. In the proposed scheme, the single-input CMAC controller is solely used to control the plant, so the input space dimension of CMAC can be simplified and no conventional controller is needed. The structure of single-input CMAC will also be self-organized;that is, the layers of single-input CMAC will grow or prune systematically and their receptive functions can be automatically adjusted. The online tuning laws of single-input CMAC parameters are derived in gradient-descent learning method and the discrete-type Lyapunov function is applied to determine the learning rates of the proposed control system so that the stability of the system can be guaranteed. The simulation results of three-link De-icing robot manipulator are provided to verify the effectiveness of the proposed control methodology.
文摘中国新车评价规程(Chinese new car assessment programme,C-NCAP)2024版乘员保护板块中新增了侧面碰撞远端乘员保护的虚拟测评项目,但是当前车辆的被动安全系统尚没有达到该评价规程要求.针对该现状,提出了在远端乘员侧添加远端气囊的解决方案,建立了远端气囊有限元模型,并进行了试验对标.首先,运用CATIA软件建立远端气囊的三维模型,利用HyperMesh对气囊模型进行几何清理及网格划分;其次,采用Primer软件折叠划分好网格的气囊有限元模型,设置远端气囊的材料属性及模型参数,应用LS-DYNA软件进行运算求解;最后,根据静态点爆与动态冲击试验结果对标远端气囊有限元模型.结果表明,静态点爆试验对标误差为1.4%,动态冲击试验对标误差在10%以内,符合新规要求.
文摘This paper proposes a numerical method to analyze the ice protection capability and predict the power requirements of a piezoelectric resonant de-icing system.The method is based on a coupled electro-mechanical finite element analysis which enables the fast computation of the modes of resonance of interest to de-ice curved surfaces and the estimation of the input voltage and current required for a given configuration(defined by its mode,actuator location,ice deposit,etc.).Eventually,the electric power to be supplied can be also assessed.The method is applied to a NACA 0024 leading edge equipped with piezoelectric actuators.First,two extension modes are analyzed and compared with respect to their efficiency and power requirements.Then,tests are carried out in an icing tunnel to verify the effectiveness of the piezoelectric ice protection system and the predictions of the maximal required power.The system allows de-icing the leading edge in less than 2 s for a glaze ice deposit.
基金supported in part by National Key Research and Development Program of China(2017YFB1200801)Continuous Co-phase Traction Power System based on Static Power Converter(20192001148).
文摘A novel DC traction power supply system suitable for energy feeding and de-icing is proposed in this paper for an urban rail transit catenary on the basis of the full bridge submodule (FBSM) modular multilevel converter (MMC). The FBSM-MMC is a novel type of voltage source converter (VSC) and can directly control the output DC voltage and conduct bipolar currents, thus flexibly controlling the power flow of the urban rail transit catenary. The proposed topology can overcome the inherent disadvantages of the output voltage drop in the diode rectifier units, increase the power supply distance and reduce the number of traction substations. The flexible DC technology can coordinate multiple FBSM-MMCs in a wide area and jointly complete the bidirectional control of catenary power flow during the operation of the electric locomotive, so as to realize the local consumption and optimal utilization of the recovered braking energy of the train. In addition, the FBSM-MMCs can also adjust the output current when the locomotive is out of service to prevent the catenary from icing in winter. The working modes of the proposed topology are illustrated in detail and the control strategy is specially designed for normal locomotive operations and catenary de-icing. Simulation cases conducted by PSCAD/EMTDC validate the proposed topology and its control strategy.
