Combined Optimal Dispatch of Thermal Power Generators and Energy Storage Considering Thermal Power Deep Peak Clipping and Wind Energy Emission Grading Punishment

Peak load and wind energy emission pressure rise more as wind energy penetration keeps growing,which affects the stabilization of the PS(power system).This paper suggests integrated optimal dispatching of thermal power generators and BESS(battery energy storage system)taking wind energy emission grading punishment and deep peak clipping into consideration.Firstly,in order to minimize wind abandonment,a hierarchical wind abandonment penalty strategy based on fuzzy control is designed and introduced,and the optimal grid-connected power of wind energy is determined as a result of minimizing the peak cutting cost of the system.Secondly,considering BESS and thermal power,the management approach of BESS-assisted virtual peak clipping of thermal power generators is aimed at reducing the degree of deep peak clipping of thermal power generators and optimizing the output of thermal power generators and the charging and discharging power of BESS.Finally,Give an example of how this strategy has been effective in reducing abandonment rates by 0.66% and 7.46% individually for different wind penetration programs,and the daily average can reduce the peak clipping power output of thermal power generators by 42.97 and 72.31 MWh and enhances the effect and economy of system peak clipping.

Peak Shaving Strategy of Concentrating Solar Power Generation Based on Multi-Time-Scale and Considering Demand Response

According to the multi-time-scale characteristics of power generation and demand-side response(DR)resources,as well as the improvement of prediction accuracy along with the approaching operating point,a rolling peak shaving optimization model consisting of three different time scales has been proposed.The proposed peak shaving optimization model considers not only the generation resources of two different response speeds but also the two different DR resources and determines each unit combination,generation power,and demand response strategy on different time scales so as to participate in the peaking of the power system by taking full advantage of the fast response characteristics of the concentrating solar power(CSP).At the same time,in order to improve the accuracy of the scheduling results,the combination of the day-ahead peak shaving phase with scenario-based stochastic programming can further reduce the influence of wind power prediction errors on scheduling results.The testing results have shown that by optimizing the allocation of scheduling resources in each phase,it can effectively reduce the number of starts and stops of thermal power units and improve the economic efficiency of system operation.The spinning reserve capacity is reduced,and the effectiveness of the peak shaving strategy is verified.

Assessment of Axial Power Peaking Factors in GHARR-1 LEU Core: A Decadal Simulation Analysis

This study aims to thoroughly investigate the axial power peaking factors (PPF) within the low-enriched uranium (LEU) core of the Ghana Research Reactor-1 (GHARR-1). This study uses advanced simulation tools, like the MCNPX code for analysing neutron behavior and the PARET/ANL code for understanding power variations, to get a clearer picture of the reactor’s performance. The analysis covers the initial six years of GHARR-1’s operation and includes projections for its whole 60-year lifespan. We closely observed the patterns of both the highest and average PPFs at 21 axial nodes, with measurements taken every ten years. The findings of this study reveal important patterns in power distribution within the core, which are essential for improving the safety regulations and fuel management techniques of the reactor. We provide a meticulous approach, extensive data, and an analysis of the findings, highlighting the significance of continuous monitoring and analysis for proactive management of nuclear reactors. The findings of this study not only enhance our comprehension of nuclear reactor safety but also carry significant ramifications for sustainable energy progress in Ghana and the wider global context. Nuclear engineering is essential in tackling global concerns, such as the demand for clean and dependable energy sources. Research on optimising nuclear reactors, particularly in terms of safety and efficiency, is crucial for the ongoing advancement and acceptance of nuclear energy.

Analysis of factors influencing carbon emissions in the Yangtze River Delta region and projections of carbon peak scenarios

Based on the supply-side perspective,the improved STIRPAT model is applied to reveal the mechanisms of supply-side factors such as human,capital,technology,industrial synergy,institutions and economic growth on carbon emissions in the Yangtze River Delta(YRD)through path analysis,and to forecast carbon emissions in the YRD from the baseline scenario,factor regulation scenario and integrated scenario to reach the peak.The results show that:(1)Jiangsu's high carbon emission pattern is the main reason for the YRD hindering the synergistic regulation of carbon emissions.(2)Human factors,institutional factors and economic growth factors can all contribute to carbon emissions in the YRD region,while technological and industrial factors can generally suppress carbon emissions in the YRD region.(3)Under the capital regulation scenario,the YRD region has the highest level of carbon emission synergy,with Jiangsu reaching its peak five years earlier.Under the balanced regulation scenario,the YRD region as a whole,Jiangsu,Zhejiang and Anhui reach the peak as scheduled.

Spatiotemporal variations of ecosystem services and driving factors in the Tianchi Bogda Peak Natural Reserve of Xinjiang,China

Nature reserves play a significant role in providing ecosystem services and are key sites for biodiversity conservation.The Tianchi Bogda Peak Natural Reserve(TBPNR),located in Xinjiang Uygur Autonomous Region,China,is an important ecological barrier area in the temperate arid zone.The evaluation of its important ecosystem services is of great significance to improve the management level and ecological protection efficiency of the reserve.In the present study,we assessed the spatiotemporal variations of four ecosystem services(including net primary productivity(NPP),water yield,soil conservation,and habitat quality)in the TBPNR from 2000 to 2020 based on the environmental and social data using the Integrated Valuation of Ecosystem Services and Trade-offs(InVEST)model.In addition,the coldspot and hotspot areas of ecosystem services were identified by hotspot analysis,and the trade-off and synergistic relationships between ecosystem services were analyzed using factor analysis in a geographic detector.During the study period,NPP and soil conservation values in the reserve increased by 48.20%and 25.56%,respectively;conversely,water yield decreased by 16.56%,and there was no significant change in habitat quality.Spatially,both NPP and habitat quality values were higher in the northern part and lower in the southern part,whereas water yield showed an opposite trend.Correlation analysis revealed that NPP showed a synergistic relationship with habitat quality and soil conservation,and exhibited a trade-off relationship with water yield.Water yield and habitat quality also had a trade-off relationship.NPP and habitat quality were affected by annual average temperature and Normalized Difference Vegetation Index(NDVI),respectively,while water yield and soil conservation were more affected by digital elevation model(DEM).Therefore,attention should be paid to the spatial distribution and dynamics of trade-off and synergistic relationships between ecosystem services in future ecological management.The findings of the present study provide a reference that could facilitate the sustainable utilization of ecosystem services in the typical fragile areas of Northwest China.

Predictive Current Control for Voltage Source Inverters Considering Dead-Time Effect

This paper proposes a new concept of synthesized voltage vector to address dead-time effect issue for Finite Control Set Model Predictive Control(FCS-MPC)technique.For a voltage source inverter(VSI),dead-time is inevitably inserted between the turn off and turn on instants of power devices to avoid short circuit phenomenon.The influence of dead-time leads to output voltage vector error of three-phase inverters.Furthermore,it will result in computing deviation in cost function,and will deteriorate the performance of the system if not properly dealt with.In this paper,the problem is clearly analyzed,and the solution to this issue is proposed by introducing a synthesized voltage vector.The proposed solution is verified by Hardware-in-the-loop(HiL)test in real time,and results validate the effectiveness of the proposed solution.

Compensation of Dead-Time Effect of Speed Sensorless Vector Control System

The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors during the estimation of field position. In this paper, a saturated feedback integrator is used, and the dead-time effect is compen- sated by current positive feedback. Experiments were carried out on the hardware platform of MCK2407, with chip TMS320LF2407 from TI Company. The results show that the prooosed method is simole and effective, and the accuracy of field position is improved.

Loss Factors and their Effect on Resonance Peaks in Mechanical Systems

The loss factors and their effects on the magnitude and frequency of resonance peaks in various mechanical sys-tems are reviewed for acoustic,vibration,and vibration fatigue applications.The main trends and relationships were obtained for linear mechanical models with hysteresis damping.The well-known features(complex module of elasticity,total loss factor,etc.)are clarified for practical engineers and students,and new results are presented(in particular,for 2-DOF in-series models with hysteresis friction).The results are of both educational and prac-tical interest and may be applied for NVH analysis and testing,mechanical and aeromechanical design,and noise and vibration control in buildings.

Combined hybrid energy storage system and transmission grid model for peak shaving based on time series operation simulation

This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.

Peak extraction and classification from digital elevation models based on the relationship between morphological characteristics and spatial position

A peak is an important topographic feature crucial in quantitative geomorphic feature analysis,digital geomorphological mapping,and other fields.Most peak extraction methods are based on the maximum elevation in a local area but ignore the morphological characteristics of the peak area.This paper proposes three indices based on the morphological characteristics of peaks and their spatial relationship with ridge lines:convexity mean index(CM-index),convexity standard deviation(CSD-index),and convexity imbalance index(CIBindex).We develop computation methods to extract peaks from digital elevation model(DEM).Subsequently,the initial peaks extracted by neighborhood statistics are classified using the proposed indices.The method is evaluated in the Qinghai Tibet Plateau and the Loess Plateau in China.An ASTER Global DEM(ASTGTM2 DEM)with a grid size of 30 m is chosen to assess the suitability of the proposed mountain peak extraction and classification method in different geomorphic regions.DEM data with grid sizes of 30 m and 5 m are used for the Loess Plateau.The mountain peak extraction and classification results obtained from the different resolution DEM are compared.The experimental results show that:(1)The CM-index and the CSDindex accurately reflect the concave or convex morphology of the surface and can be used as supplements to existing surface morphological indices.(2)The three indices can identify pseudo mountain peaks and classify the remaining peaks into single ridge peak(SR-Peak)and multiple ridge intersection peak(MRI-Peak).The visual inspection results show that the classification accuracy in the different study areas exceeds 75%.(3)The number of peaks is significantly higher for the 5 m DEM than for the 30 m DEM because more peaks can be detected at a finer resolution.

Peak Electricity Demand Management and Energy Efficiency among Large Steel Manufacturing Firms in Nairobi Region, Kenya

To reduce peak electricity demand and hence reduce capacity costs due to added investment of generating additional power to meet short intervals of peak demand, can enhance energy efficiency. Where it is possible to adjust timing and the quantity of electricity consumption and at the same time achieve the same useful effect, the value of the energy service itself remains unchanged. Peak demand management is viewed as the balance between demand and generation of energy hence an important requirement for stabilized operation of power system. Therefore, the purpose of this study was to establish the correlation between peak electricity demand management strategies and energy efficiency among large steel manufacturing firms in Nairobi, Kenya. The strategies investigated were demand scheduling, Peak shrinking and Peak shaving. Demand scheduling involves shifting predetermined loads to low peak periods thereby flattening the demand curve. Peak shrinking on the other hand involves installation of energy efficient equipment thereby shifting the overall demand curve downwards. Peak shaving is the deployment of secondary generation on site to temporarily power some loads during peak hours thereby reducing demand during the peak periods of the plant. The specific objectives were to test the relationship between demand scheduling and energy efficiency among large steel manufacturing firms in Nairobi Region;to test the correlation between peak shrinking and energy efficiency among large steel manufacturing firms in Nairobi Region;and to test the association between peak shaving and energy efficiency among large steel manufacturing firms in Nairobi Region. The study adopted a descriptive research design to determine the relationship between each independent variable namely demand scheduling, peak shrinking, peak shaving and the dependent variable, the energy efficiency. The target population was large steel manufacturing firms in Nairobi Region, Kenya. The study used both primary and secondary data. The primary data was from structured questionnaires while secondary data was from historical electricity consumption data for the firms under study. The results revealed that both peak shrinking and peak shaving were statistically significant in influencing energy efficiency among the steel manufacturing firms in Nairobi Region, each with Pearson correlation coefficient of 0.903, thus a strong linear relationship between the investigated strategy and the dependent variable, energy efficiency. The obtained results are significant at probability value of 0.005 (p 0.05). The conclusion is that peak shrinking and peak shaving have an impact on energy efficiency in the population under study, and if properly implemented, may lead to efficient utilization of the available energy. The study further recommended that peak demand management practices need to be implemented efficiently as a way of improving the overall plant load factor and energy efficiency.

A method to predict the peak shear strength of rock joints based on machine learning

In geotechnical and tunneling engineering,accurately determining the mechanical properties of jointed rock holds great significance for project safety assessments.Peak shear strength(PSS),being the paramount mechanical property of joints,has been a focal point in the research field.There are limitations in the current peak shear strength(PSS)prediction models for jointed rock:(i)the models do not comprehensively consider various influencing factors,and a PSS prediction model covering seven factors has not been established,including the sampling interval of the joints,the surface roughness of the joints,the normal stress,the basic friction angle,the uniaxial tensile strength,the uniaxial compressive strength,and the joint size for coupled joints;(ii)the datasets used to train the models are relatively limited;and(iii)there is a controversy regarding whether compressive or tensile strength should be used as the strength term among the influencing factors.To overcome these limitations,we developed four machine learning models covering these seven influencing factors,three relying on Support Vector Regression(SVR)with different kernel functions(linear,polynomial,and Radial Basis Function(RBF))and one using deep learning(DL).Based on these seven influencing factors,we compiled a dataset comprising the outcomes of 493 published direct shear tests for the training and validation of these four models.We compared the prediction performance of these four machine learning models with Tang’s and Tatone’s models.The prediction errors of Tang’s and Tatone’s models are 21.8%and 17.7%,respectively,while SVR_linear is at 16.6%,SVR_poly is at 14.0%,and SVR_RBF is at 12.1%.DL outperforms the two existing models with only an 8.5%error.Additionally,we performed shear tests on granite joints to validate the predictive capability of the DL-based model.With the DL approach,the results suggest that uniaxial tensile strength is recommended as the material strength term in the PSS model for more reliable outcomes.

Optimal reduction and equilibrium carbon allowance price for the thermal power industry under China’s peak carbon emissions target

As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation technologies is also an important means of reducing CO_(2)emissions and achieving the carbon peak and carbon neutral commitments.This study used fractional Brownian motion to describe the energy-switching cost and constructed a stochastic optimization model on carbon allowance(CA)trading volume and emission-reduction strategy during compliance period with the Hurst exponent and volatility coefficient in the model estimated.We defined the optimal compliance cost of thermal power enterprises as the form of the unique solution of the Hamilton–Jacobi–Bellman equation by combining the dynamic optimization principle and the fractional It?’s formula.In this manner,we obtained the models for optimal emission reduction and equilibrium CA price.Our numerical analysis revealed that,within a compliance period of 2021–2030,the optimal reductions and desired equilibrium prices of CAs changed concurrently,with an increasing trend annually in different peak-year scenarios.Furthermore,sensitivity analysis revealed that the energy price indirectly affected the equilibrium CA price by influencing the Hurst exponent,the depreciation rate positively impacted the CA price,and increasing the initial CA reduced the optimal reduction and the CA price.Our findings can be used to develop optimal emission-reduction strategies for thermal power enterprises and carbon pricing in the carbon market.

Optimal Management of Energy Storage Systems for Peak Shaving in a Smart Grid

In this paper,the installation of energy storage systems(EES)and their role in grid peak load shaving in two echelons,their distribution and generation are investigated.First,the optimal placement and capacity of the energy storage is taken into consideration,then,the charge-discharge strategy for this equipment is determined.Here,Genetic Algorithm(GA)and Particle Swarm Optimization(PSO)are used to calculate the minimum and maximum load in the network with the presence of energy storage systems.The energy storage systems were utilized in a distribution system with the aid of a peak load shaving approach.Ultimately,the battery charge-discharge is managed at any time during the day,considering the load consumption at each hour.The results depict that the load curve reached a constant state by managing charge-discharge with no significant changes.This shows the significance of such matters in terms of economy and technicality.

A method for correcting characteristic X-ray net peak count from drifted shadow peak

To correct spectral peak drift and obtain more reliable net counts,this study proposes a long short-term memory(LSTM)model fused with a convolutional neural network(CNN)to accurately estimate the relevant parameters of a nuclear pulse signal by learning of samples.A predefined mathematical model was used to train the CNN-LSTM model and generate a dataset composed of distorted pulse sequences.The trained model was validated using simulated pulses.The relative errors in the amplitude estimation of pulse sequences with different degrees of distortion were obtained using triangular shaping,CNN-LSTM,and LSTM models.As a result,for severely distorted pulses,the relative error of the CNN-LSTM model in estimating the pulse parameters was reduced by 14.35%compared with that of the triangular shaping algorithm.For slightly distorted pulses,the relative error of the CNN-LSTM model was reduced by 0.33%compared with that of the triangular shaping algorithm.The model was then evaluated considering two performance indicators,the correction ratio and the efficiency ratio,which represent the proportion of the increase in peak area of the two characteristic peak regions of interest(ROIs)to the peak area of the corrected characteristic peak ROI and the proportion of the increase in peak area of the two characteristic peak ROIs to the peak areas of the two shadow peak ROI,respectively.Ten measurement results of the iron ore samples indicate that approximately 86.27%of the decreased peak area of the shadow peak ROI was corrected to the characteristic peak ROI,and the proportion of the corrected peak area to the peak area of the characteristic peak ROI was approximately 1.72%.The proposed CNN-LSTM model can be applied to X-ray energy spectrum correction,which is of great significance for X-ray spectroscopy and elemental content analyses.

Life-cycle assessment of batteries for peak demand reduction

At present,a life-cycle assessment of energy storage systems(ESSs)is not widely available in the literature.Such an assessment is increasingly vital nowadays as ESS is recognized as one of the important equipment in power systems to reduce peak demands for deferring or avoiding augmentation in the network and power generation.As the battery cost is still very high at present,a comprehensive assessment is necessary to determine the optimum ESS capacity so that the maximum financial gain is achievable at the end of the batteries’lifespan.Therefore,an effective life-cycle assessment is proposed in this paper to show how the optimum ESS capacity can be determined such that the maximum net financial gain is achievable at the end of the batteries’lifespan when ESS is used to perform peak demand reductions for the customer or utility companies.The findings reveal the positive financial viability of ESS on the power grid,otherwise the projection of the financial viability is often seemingly poor due to the high battery cost with a short battery lifespan.An improved battery degradation model is used in this assessment,which can simulate the battery degradation accurately in a situation whereby the charging current,discharging current,and temperature of the batteries are intermittent on a site during peak demand reductions.This assessment is crucial to determine the maximum financial benefits brought by ESS.

Error reachable set based stabilization of switched linear systems with bounded peak disturbances

This paper investigates the error reachable set based stabilization problem for a class of discrete-time switched linear systems with bounded peak disturbances under persistent dwell-time(PDT)constraint.A double-clockdependent control scheme is presented that can split the disturbed switched system into a nominal system and an error system,and assign to each system a controller scheduled by a clock.A necessary and sufficient convex stability criterion is presented for the nominal system,and is further extended to the stabilization controller design with a nominal clock.In the presence of bounded peak disturbances,another stabilization controller with an error clock is developed for the error system,with the purpose of‘‘minimizing’’the reachable set of the error system by the ellipsoidal techniques.It is demonstrated that the disturbed system is also globally exponentially stable in the sense of converging to an over approximation of the reachable set of the error system,i.e.,a union of a family of bounding ellipsoids,that can also be regarded as the cross section of a tube containing the trajectories of the disturbed system.Two numerical examples are provided to verify the effectiveness of the developed results.

An Adaptive Slope Compensation Circuit for Peak Current Mode of Boost Switching Power Supply

Based on the analysis of the basic principle of slope compensation, a high-precision adaptive slope compensation circuit for peak current mode boost DC/DC converter is designed. The circuit dynamically detects the input and output voltage of the boost circuit to realize automatic adjustment of the compensation amount with the change of duty ratio, which makes the ramp compensation slope optimized. The design uses a high-precision subtracter to improve the accuracy of slope compensation. While eliminating sub-slope oscillation and improving the stability of boost circuit, the negative impact of compensation on boost circuit is minimized, and the load capacity and transient response speed of boost circuit are guaranteed. The circuit is designed based on SMIC 0.18um CMOS technology, with simple structure, high reliability and easy engineering implementation. Spectre circuit simulator 17.1.0.124 64b simulation results show that the circuit has high compensation accuracy and wide input and output voltage range. When the working voltage is 3.3 V, the compensation slope can be adjusted adaptively under different duty cycles, and the minimum error between the compensation slope and the theoretical optimal compensation slope is only 0.42%.

PSO-DBNet for Peak-to-Average Power Ratio Reduction Using Deep Belief Network

Data transmission through a wireless network has faced various signal problems in the past decades.The orthogonal frequency division multiplexing(OFDM)technique is widely accepted in multiple data transfer patterns at various frequency bands.A recent wireless communication network uses OFDM in longterm evolution(LTE)and 5G,among others.The main problem faced by 5G wireless OFDM is distortion of transmission signals in the network.This transmission loss is called peak-to-average power ratio(PAPR).This wireless signal distortion can be reduced using various techniques.This study uses machine learning-based algorithm to solve the problem of PAPR in 5G wireless communication.Partial transmit sequence(PTS)helps in the fast transfer of data in wireless LTE.PTS is merged with deep belief neural network(DBNet)for the efficient processing of signals in wireless 5G networks.Result indicates that the proposed system outperforms other existing techniques.Therefore,PAPR reduction in OFDM by DBNet is optimized with the help of an evolutionary algorithm called particle swarm optimization.Hence,the specified design supports in improving the proposed PAPR reduction architecture.

Research on the Spatiotemporal Evolution,and Optimized Paths of Carbon Pressure in Northwestern Sichuan under the Carbon Peaking and Carbon Neutrality Goals

Consolidating carbon sink capacity and reducing carbon pressure are important channels to achieve the carbon peaking and carbon neutrality goals actively yet prudently.In order to study the current situation of carbon pressure in the Northwestern Sichuan,we took the carbon pressure of the Aba Tibetan-Qiang autonomous prefecture(Aba prefecture)as an example and used the Intergovernmental Panel on Climate Change(IPCC)approach to measure the carbon emissions,carbon uptake,and the carbon balance index(CBI)of each county-level city in Aba prefecture from 2012 to 2020.The study found that:(a)There was a continuous trend of declining carbon emissions,increased carbon uptake,and decreased CBI in Aba prefecture during the sample period,but there is a large variability among county-level cities;(b)Aba prefecture differs in the spatiotemporal distribution of carbon emissions,carbon uptake,and CBI.Based on the research results,we propose several optimized paths for alleviating the current carbon pressure situation in the Northwestern Sichuan.