Real-time prediction of excavation-induced displacement of retaining pile during the deep excavation process is crucial for construction safety.This paper proposes a modified back analysis method with multi-objective ...Real-time prediction of excavation-induced displacement of retaining pile during the deep excavation process is crucial for construction safety.This paper proposes a modified back analysis method with multi-objective optimization procedure,which enables a real-time prediction of horizontal displacement of retaining pile during construction.As opposed to the traditional stage-by-stage back analysis,time series monitoring data till the current excavation stage are utilized to form a multi-objective function.Then,the multi-objective particle swarm optimization (MOPSO) algorithm is applied for parameter identification.The optimized model parameters are immediately adopted to predict the excavation-induced pile deformation in the continuous construction stages.To achieve efficient parameter optimization and real-time prediction of system behavior,the back propagation neural network (BPNN) is established to substitute the finite element model,which is further implemented together with MOPSO for automatic operation.The proposed approach is applied in the Taihu tunnel excavation project,where the effectiveness of the method is demonstrated via the comparisons with the site monitoring data.The method is reliable with a prediction accuracy of more than 90%.Moreover,different optimization algorithms,including non-dominated sorting genetic algorithm (NSGA-II),Pareto Envelope-based Selection Algorithm II (PESA-II) and MOPSO,are compared,and their influences on the prediction accuracy at different excavation stages are studied.The results show that MOPSO has the best performance for high dimensional optimization task.展开更多
The COVID-19 pandemic has a significant impact on the global economy and health.While the pandemic continues to cause casualties in millions,many countries have gone under lockdown.During this period,people have to st...The COVID-19 pandemic has a significant impact on the global economy and health.While the pandemic continues to cause casualties in millions,many countries have gone under lockdown.During this period,people have to stay within walls and become more addicted towards social networks.They express their emotions and sympathy via these online platforms.Thus,popular social media(Twitter and Facebook)have become rich sources of information for Opinion Mining and Sentiment Analysis on COVID-19-related issues.We have used Aspect Based Sentiment Analysis to anticipate the polarity of public opinion underlying different aspects from Twitter during lockdown and stepwise unlock phases.The goal of this study is to find the feelings of Indians about the lockdown initiative taken by the Government of India to stop the spread of Coronavirus.India-specific COVID-19 tweets have been annotated,for analysing the sentiment of common public.To classify the Twitter data set a deep learning model has been proposed which has achieved accuracies of 82.35%for Lockdown and 83.33%for Unlock data set.The suggested method outperforms many of the contemporary approaches(long shortterm memory,Bi-directional long short-term memory,Gated Recurrent Unit etc.).This study highlights the public sentiment on lockdown and stepwise unlocks,imposed by the Indian Government on various aspects during the Corona outburst.展开更多
This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the lim...This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the limitations of present methods based on aggregation operators. First, the limitations of several existing single-valued neutrosophic weighted averaging aggregation operators (i.e. , the single-valued neutrosophic weighted averaging, single-valued neutrosophic weighted algebraic averaging, single-valued neutrosophic weighted Einstein averaging, single-valued neutrosophic Frank weighted averaging, and single-valued neutrosophic Hamacher weighted averaging operators), which can produce some indeterminate terms in the aggregation process, are discussed. Second, an ISNHWA operator was developed to overcome the limitations of existing operators. Third, the properties of the proposed operator, including idempotency, boundedness, monotonicity, and commutativity, were analyzed. Application examples confirmed that the ISNHWA operator and the proposed MCGDM method are rational and effective. The proposed improved ISNHWA operator and MCGDM method can overcome the indeterminate results in some special cases in existing single-valued neutrosophic weighted averaging aggregation operators and MCGDM methods.展开更多
The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayto...The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.展开更多
According to the aggregation method of experts' evaluation information in group decision-making,the existing methods of determining experts' weights based on cluster analysis take into account the expert's preferen...According to the aggregation method of experts' evaluation information in group decision-making,the existing methods of determining experts' weights based on cluster analysis take into account the expert's preferences and the consistency of expert's collating vectors,but they lack of the measure of information similarity.So it may occur that although the collating vector is similar to the group consensus,information uncertainty is great of a certain expert.However,it is clustered to a larger group and given a high weight.For this,a new aggregation method based on entropy and cluster analysis in group decision-making process is provided,in which the collating vectors are classified with information similarity coefficient,and the experts' weights are determined according to the result of classification,the entropy of collating vectors and the judgment matrix consistency.Finally,a numerical example shows that the method is feasible and effective.展开更多
With the fast growth of Chinese economic, more and more capital will be invested in environmental projects. How to select the environmental investment projects (alternatives) for obtaining the best environmental qua...With the fast growth of Chinese economic, more and more capital will be invested in environmental projects. How to select the environmental investment projects (alternatives) for obtaining the best environmental quality and economic benefits is an important problem for the decision makers. The purpose of this paper is to develop a decision-making model to rank a finite number of alternatives with several and sometimes conflicting criteria. A model for ranking the projects of municipal sewage treatment plants is proposed by using exports' information and the data of the real projects. And, the ranking result is given based on the PROMETHEE method. Furthermore, by means of the concept of the weight stability intervals (WSI), the sensitivity of the ranking results to the size of criteria values and the change of weights value of criteria are discussed. The result shows that some criteria, such as “proportion of benefit to project cost”, will influence the ranking result of alternatives very strong while others not. The influence are not only from the value of criterion but also from the changing the weight of criterion. So, some criteria such as “proportion of benefit to project cost” are key critera for ranking the projects. Decision makers must be cautious to them.展开更多
This paper deals with the procedure and methodology which can be used to select the optimal treatment and disposal technology of municipal solid waste (MSW), and to provide practical and effective technical support ...This paper deals with the procedure and methodology which can be used to select the optimal treatment and disposal technology of municipal solid waste (MSW), and to provide practical and effective technical support to policy-making, on the basis of study on solid waste management status and development trend in China and abroad. Focusing on various treatment and disposal technologies and processes of MSW, this study established a Monte-Carlo mathematical model of cost minimization for MSW handling subjected to environmental constraints. A new method of element stream (such as C, H, O, N, S) analysis in combination with economic stream analysis of MSW was developed. By following the streams of different treatment processes consisting of various techniques from generation, separation, transfer, transport, treatment, recycling and disposal of the wastes, the element constitution as well as its economic distribution in terms of possibility functions was identified. Every technique step was evaluated economically. The Mont-Carlo method was then conducted for model calibration. Sensitivity analysis was also carried out to identify the most sensitive factors. Model calibration indicated that landfill with power generation of landfill gas was economically the optimal technology at the present stage under the condition of more than 58% of C, H, O, N, S going to landfill. Whether or not to generate electricity was the most sensitive factor. If landfilling cost increases, MSW separation treatment was recommended by screening first followed with incinerating partially and composting partially with residue landfilling. The possibility of incineration model selection as the optimal technology was affected by the city scale. For big cities and metropolitans with large MSW generation, possibility for constructing large-scale incineration facilities increases, whereas, for middle and small cities, the effectiveness of incinerating waste decreases.展开更多
The pressurizing pipeline of hot press resonates under the excitation load,which poses a serious hidden danger to the safety of the equipment and the operator.In order to increase the natural frequency of the pressuri...The pressurizing pipeline of hot press resonates under the excitation load,which poses a serious hidden danger to the safety of the equipment and the operator.In order to increase the natural frequency of the pressurizing pipeline,modal analysis of the pressurizing pipeline is carried out to study the mechanism of pipeline vibration and common vibration reduction measures.A method of increasing the natural frequency of the pressurizing pipeline was analyzed.The influence of pipeline clamp assembly stiffness,pipeline clamp number and pipeline clamp installation position on the mode of the pressurizing pipeline is studied.Sensitivity analysis is carried out to study the influence of the various parameters on the mode of the pressurizing pipeline.Genetic algorithm based on Pareto optimality is introduced for multi-objective optimization of pressurizing pipeline.The optimization results show that the natural frequency of the pressurizing pipeline increases by 2.4%and the displacement response is reduced by 17.7%.展开更多
For the problems of the consistency ranking of the group decision-making scheme,from the view of group negotiation and system coordination,the grey incidence analysis and Nash bargaining model are used to establish a ...For the problems of the consistency ranking of the group decision-making scheme,from the view of group negotiation and system coordination,the grey incidence analysis and Nash bargaining model are used to establish a consistency group decision-making method.First,the concepts of the consensus partial decision-making program and the consensus overall ideal decision-making program are defined,and then a multi-object optimization model is constructed based on the satisfaction maximization of group negotiation and deviation minimization of system coordination to determine the consensus partial decision-making program and the consensus overall ideal decision-making program.Moreover,the grey incidence analysis is exploited to measure the close degrees between them.Finally,a real case of the online product evaluation verifies the validity and rationality of the proposed model.展开更多
A new fuzzification method for multi-objective decision-making and selective sorting is proposed on the basis of the fuzzy consistent relation, and the specific algorithm is presented. The method is applied to the eva...A new fuzzification method for multi-objective decision-making and selective sorting is proposed on the basis of the fuzzy consistent relation, and the specific algorithm is presented. The method is applied to the evaluation of highway planning of Zhanjiang city. To decrease the subjectivity in the process of decision-making, the LOWA operator is introduced, and a discussion on how to select appropriate weights involved in multi-objective sorting is made. It is concluded that it is feasible to apply the fuzzy consistent relation to multi-objective decision-making analysis, and the improved fuzzication method is workable.展开更多
It is not objective to rate the decision-making factors in the traditional failure mode and effect analysis,so fuzzy semantic theory is used in this paper.Six fuzzy semantic scales and their corresponding semantics ar...It is not objective to rate the decision-making factors in the traditional failure mode and effect analysis,so fuzzy semantic theory is used in this paper.Six fuzzy semantic scales and their corresponding semantics are summarized,and a defuzzification method is studied to obtain the fuzzy value table of the six fuzzy semantic scales.For the conflicts between experts in the traditional failure mode and effects analysis,a conflict-resolution algorithm is studied to obtain the failure risk order.Finally,a certain type of industrial valve is used as an example to prove the validity of the theory proposed in this paper.展开更多
Driven by the goal of“carbon neutrality,”the increase in use of renewable energy power systems will be inevitable in the future.Uncontrolled output power and random volatility make it difficult to balance power in r...Driven by the goal of“carbon neutrality,”the increase in use of renewable energy power systems will be inevitable in the future.Uncontrolled output power and random volatility make it difficult to balance power in real time during system operation.Therefore,energy storage is considered to be an effective way to ensure the real-time balance of system power.However,cost of energy storage is relatively expensive.As a solution,energy storage can be used to balance the system power in order to reduce system operating costs.Taking the high proportion of wind power systems as an example,the impact of the“supply side”low-carbon transformation on the economics and reliability of power system operation is explored.In order to solve the problem of power system operation configuration optimization under the background of“carbon neutrality,”this paper establishes a multi-objective programming model.展开更多
Management of forest lands considering multi-functional approaches is the basis to sustain or enhance the provi-sion of specific benefits,while minimizing negative impacts to the environment.Defining a desired managem...Management of forest lands considering multi-functional approaches is the basis to sustain or enhance the provi-sion of specific benefits,while minimizing negative impacts to the environment.Defining a desired management itinerary to a forest depends on a variety of factors,including the forest type,its ecological characteristics,and the social and economic needs of local communities.A strategic assessment of the forest use suitability(FUS)(namely productive,protective,conservation-oriented,social and multi-functional)at regional level,based on the provision of forest ecosystem services and trade-offs between FUS alternatives,can be used to develop management strategies that are tailored to the specific needs and conditions of the forest.The present study assesses the provision of multiple forest ecosystem services and employs a decision model to identify the FUS that sup-ports the most present and productive ecosystem services in each stand in Catalonia.For this purpose,we apply the latest version of the Ecosystem Management Decision Support(EMDS)system,a spatially oriented decision support system that provides accurate results for multi-criteria management.We evaluate 32 metrics and 12 as-sociated ecosystem services indicators to represent the spatial reality of the region.According to the results,the dominant primary use suitability is social,followed by protective and productive.Nevertheless,final assignment of uses is not straightforward and requires an exhaustive analysis of trade-offs between all alternative options,in many cases identifying flexible outcomes,and increasing the representativeness of multi-functional use.The assignment of forest use suitability aims to significantly improve the definition of the most adequate management strategy to be applied.展开更多
To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weap...To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.展开更多
Due to double salient structure,Flux Switching Machines(FSMs)are preferred for brushless AC high speed applications.Permanent Magnet(PM)FSMs(PM-FSMs)are suited applicants where high torque density(Tden)and power densi...Due to double salient structure,Flux Switching Machines(FSMs)are preferred for brushless AC high speed applications.Permanent Magnet(PM)FSMs(PM-FSMs)are suited applicants where high torque density(Tden)and power density(Pden)are the utmost requisite.However conventional PM-FSMs utilizes excessive rare earth PM volume VPM,higher cogging torque Tcog,high torque ripples(Trip)and comparatively lower(Tden)and Pden due to flux leakage.To overcome the aforesaid demerits,a new high(Tden)Segmented PM Consequent Pole(CP)FSM(SPMCPFSM)with flux bridge and barrier is proposed which successfully reduces VPM by 46.52%and PM cost by 46.48%.Moreover,Multi-Objective Optimization(MOO)examines electromagnetic performance due to variation in geometric parameters for global optimum parameters with key metric such as flux linkage(Φpp),flux harmonics(ΦTHD)average torque(Tavg),Tcog,Trip,Tden,average power(Pavg)and Pden.Analysis reveals that MOO improveΦpp by 22.68%,boost Tavg by 11.41%,enhanced Pavg by 4.55%and increased Tden and Pden by 11.41%.Detailed electromagnetic performance comparison with existing state of the art shows that proposed SPMCPFSM offer Tavg maximum up to 88.8%,truncate Trip up to 24.8%,suppress Tcog up to 22.74%,and results 2.45 times Tden and Pden.展开更多
Scanning ion conductance microscopy(SICM) is an emerging non-destructive surface topography characterization apparatus with nanoscale resolution. However, the low regulating frequency of probe in most existing modul...Scanning ion conductance microscopy(SICM) is an emerging non-destructive surface topography characterization apparatus with nanoscale resolution. However, the low regulating frequency of probe in most existing modulated current based SICM systems increases the system noise, and has difficulty in imaging sample surface with steep height changes. In order to enable SICM to have the capability of imaging surfaces with steep height changes, a novel probe that can be used in the modulated current based bopping mode is designed. The design relies on two piezoelectric ceramics with different travels to separate position adjustment and probe frequency regulation in the Z direction. To fiarther improve the resonant frequency of the probe, the material and the key dimensions for each component of the probe are optimized based on the multi-objective optimization method and the finite element analysis. The optimal design has a resonant frequency of above 10 kHz. To validate the rationality of the designed probe, microstructured grating samples are imaged using the homebuilt modulated current based SICM system. The experimental results indicate that the designed high frequency probe can effectively reduce the spike noise by 26% in the average number of spike noise. The proposed design provides a feasible solution for improving the imaging quality of the existing SICM systems which normally use ordinary probes with relatively low regulating frequency.展开更多
The halbach permanent magnet synchronous motor(HPMSM)combines the advantages of permanent magnet motors and halbach arrays,which make it very suitable to act as a robot joint motor,and it can also be used in other fie...The halbach permanent magnet synchronous motor(HPMSM)combines the advantages of permanent magnet motors and halbach arrays,which make it very suitable to act as a robot joint motor,and it can also be used in other fields,such as electric vehicles,wind power generation,etc.At first,the sizing equation is derived and the initial design dimensions are calculated for the HPMSM with the rated power of 275W,based on which the finite element parametric model of the motor is built up and the key structural parameters that affect the total harmonic distortion of air-gap flux density and output torque are determined by analyzing multi-objective sensitivity.Then the structure parameters are optimized by using the cuckoo search algorithm.Last,in view of the problem of local overheating of the motor,an improved stator slot structure is proposed and researched.Under the condition of the same outer dimensions,the electromagnetic performance of the HPMSM before and after the improvement are analyzed and compared by the finite element method.It is found that the improved HPMSM can obtain better performances.展开更多
Multi-objective Evolutionary Algorithm (MOEA) is becoming a hot research area and quite a few aspects of MOEAs have been studied and discussed. However there are still few literatures discussing the roles of search an...Multi-objective Evolutionary Algorithm (MOEA) is becoming a hot research area and quite a few aspects of MOEAs have been studied and discussed. However there are still few literatures discussing the roles of search and selection operators in MOEAs. This paper studied their roles by solving a case of discrete Multi-objective Optimization Problem (MOP): Multi-objective TSP with a new MOEA. In the new MOEA, We adopt an efficient search operator, which has the properties of both crossover and mutation, to generate the new individuals and chose two selection operators: Family Competition and Population Competition with probabilities to realize selection. The simulation experiments showed that this new MOEA could get good uniform solutions representing the Pareto Front and outperformed SPEA in almost every simulation run on this problem. Furthermore, we analyzed its convergence property using finite Markov chain and proved that it could converge to Pareto Front with probability 1. We also find that the convergence property of MOEAs has much relationship with search and selection operators.展开更多
A multi-objective optimization process for wind turbine steel towers is described in present work.The objective functions are tower top deformation and mass.The tower's height,radius and thickness are considered a...A multi-objective optimization process for wind turbine steel towers is described in present work.The objective functions are tower top deformation and mass.The tower's height,radius and thickness are considered as design variables.The mathematical relationships between objective functions and variables were predicted by adopting a response surface methodology(RSM).Furthermore,the multi-objective non-dominated sorting genetic algorithm-II(NSGA-II)is adopted to optimize the tower structure to achieve accurate results with the minimum top deformation and total mass.A case study on a 2MW wind turbine tower optimization is given,which computes the desired tower structure parameters.The results are compared with the original tower:a reduction of tower top deformation reduction by about 16.5%and a reduction of a mass by about 1.5%could be achieved for such an optimization process.展开更多
There exists large space to save energy of high-sulfur natural gas purification process.The multi-objective optimization problem has been investigated to effectively reduce the total comprehensive energy consumption a...There exists large space to save energy of high-sulfur natural gas purification process.The multi-objective optimization problem has been investigated to effectively reduce the total comprehensive energy consumption and further improve the production rate of purified gas.A steady-state simulation model of high-sulfur natural gas purification process has been set up by using ProMax.Seven key operating parameters of the purification process have been determined based on the analysis of comprehensive energy consumption distribution.To solve the problem that the process model does not converge in some conditions,back-propagation(BP)neural network has been applied to substitute the simulation model to predict the relative parameters in the optimization model.The uniform design method and the table U21(107)have been applied to design the experiment points for training and testing BP model.High prediction accuracy can be achieved by using the BP model.Nondominated sorting genetic algorithm-II has been developed to optimize the two objectives,and 100 Pareto optimal solutions have been obtained.Three optimal points have been selected and evaluated further.The results demonstrate that the total comprehensive energy consumption is reduced by 13.4%and the production rate of purified gas is improved by 0.2%under the optimized operating conditions.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52208380 and 51979270)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.SKLGME021022).
文摘Real-time prediction of excavation-induced displacement of retaining pile during the deep excavation process is crucial for construction safety.This paper proposes a modified back analysis method with multi-objective optimization procedure,which enables a real-time prediction of horizontal displacement of retaining pile during construction.As opposed to the traditional stage-by-stage back analysis,time series monitoring data till the current excavation stage are utilized to form a multi-objective function.Then,the multi-objective particle swarm optimization (MOPSO) algorithm is applied for parameter identification.The optimized model parameters are immediately adopted to predict the excavation-induced pile deformation in the continuous construction stages.To achieve efficient parameter optimization and real-time prediction of system behavior,the back propagation neural network (BPNN) is established to substitute the finite element model,which is further implemented together with MOPSO for automatic operation.The proposed approach is applied in the Taihu tunnel excavation project,where the effectiveness of the method is demonstrated via the comparisons with the site monitoring data.The method is reliable with a prediction accuracy of more than 90%.Moreover,different optimization algorithms,including non-dominated sorting genetic algorithm (NSGA-II),Pareto Envelope-based Selection Algorithm II (PESA-II) and MOPSO,are compared,and their influences on the prediction accuracy at different excavation stages are studied.The results show that MOPSO has the best performance for high dimensional optimization task.
文摘The COVID-19 pandemic has a significant impact on the global economy and health.While the pandemic continues to cause casualties in millions,many countries have gone under lockdown.During this period,people have to stay within walls and become more addicted towards social networks.They express their emotions and sympathy via these online platforms.Thus,popular social media(Twitter and Facebook)have become rich sources of information for Opinion Mining and Sentiment Analysis on COVID-19-related issues.We have used Aspect Based Sentiment Analysis to anticipate the polarity of public opinion underlying different aspects from Twitter during lockdown and stepwise unlock phases.The goal of this study is to find the feelings of Indians about the lockdown initiative taken by the Government of India to stop the spread of Coronavirus.India-specific COVID-19 tweets have been annotated,for analysing the sentiment of common public.To classify the Twitter data set a deep learning model has been proposed which has achieved accuracies of 82.35%for Lockdown and 83.33%for Unlock data set.The suggested method outperforms many of the contemporary approaches(long shortterm memory,Bi-directional long short-term memory,Gated Recurrent Unit etc.).This study highlights the public sentiment on lockdown and stepwise unlocks,imposed by the Indian Government on various aspects during the Corona outburst.
文摘This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the limitations of present methods based on aggregation operators. First, the limitations of several existing single-valued neutrosophic weighted averaging aggregation operators (i.e. , the single-valued neutrosophic weighted averaging, single-valued neutrosophic weighted algebraic averaging, single-valued neutrosophic weighted Einstein averaging, single-valued neutrosophic Frank weighted averaging, and single-valued neutrosophic Hamacher weighted averaging operators), which can produce some indeterminate terms in the aggregation process, are discussed. Second, an ISNHWA operator was developed to overcome the limitations of existing operators. Third, the properties of the proposed operator, including idempotency, boundedness, monotonicity, and commutativity, were analyzed. Application examples confirmed that the ISNHWA operator and the proposed MCGDM method are rational and effective. The proposed improved ISNHWA operator and MCGDM method can overcome the indeterminate results in some special cases in existing single-valued neutrosophic weighted averaging aggregation operators and MCGDM methods.
基金This work was supported of National Natural Science Foundation of China Fund(No.52306033)State Key Laboratory of Engines Fund(No.SKLE-K2022-07)the Jiangxi Provincial Postgraduate Innovation Special Fund(No.YC2022-s513).
文摘The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.
文摘According to the aggregation method of experts' evaluation information in group decision-making,the existing methods of determining experts' weights based on cluster analysis take into account the expert's preferences and the consistency of expert's collating vectors,but they lack of the measure of information similarity.So it may occur that although the collating vector is similar to the group consensus,information uncertainty is great of a certain expert.However,it is clustered to a larger group and given a high weight.For this,a new aggregation method based on entropy and cluster analysis in group decision-making process is provided,in which the collating vectors are classified with information similarity coefficient,and the experts' weights are determined according to the result of classification,the entropy of collating vectors and the judgment matrix consistency.Finally,a numerical example shows that the method is feasible and effective.
基金Shanghai Leading Academic Discipline Project (T0502)Shanghai Municipal Educational Commission Project (05EZ32).
文摘With the fast growth of Chinese economic, more and more capital will be invested in environmental projects. How to select the environmental investment projects (alternatives) for obtaining the best environmental quality and economic benefits is an important problem for the decision makers. The purpose of this paper is to develop a decision-making model to rank a finite number of alternatives with several and sometimes conflicting criteria. A model for ranking the projects of municipal sewage treatment plants is proposed by using exports' information and the data of the real projects. And, the ranking result is given based on the PROMETHEE method. Furthermore, by means of the concept of the weight stability intervals (WSI), the sensitivity of the ranking results to the size of criteria values and the change of weights value of criteria are discussed. The result shows that some criteria, such as “proportion of benefit to project cost”, will influence the ranking result of alternatives very strong while others not. The influence are not only from the value of criterion but also from the changing the weight of criterion. So, some criteria such as “proportion of benefit to project cost” are key critera for ranking the projects. Decision makers must be cautious to them.
基金Project Supported by Tsinghua Research Foundation (No. Jc2003010).
文摘This paper deals with the procedure and methodology which can be used to select the optimal treatment and disposal technology of municipal solid waste (MSW), and to provide practical and effective technical support to policy-making, on the basis of study on solid waste management status and development trend in China and abroad. Focusing on various treatment and disposal technologies and processes of MSW, this study established a Monte-Carlo mathematical model of cost minimization for MSW handling subjected to environmental constraints. A new method of element stream (such as C, H, O, N, S) analysis in combination with economic stream analysis of MSW was developed. By following the streams of different treatment processes consisting of various techniques from generation, separation, transfer, transport, treatment, recycling and disposal of the wastes, the element constitution as well as its economic distribution in terms of possibility functions was identified. Every technique step was evaluated economically. The Mont-Carlo method was then conducted for model calibration. Sensitivity analysis was also carried out to identify the most sensitive factors. Model calibration indicated that landfill with power generation of landfill gas was economically the optimal technology at the present stage under the condition of more than 58% of C, H, O, N, S going to landfill. Whether or not to generate electricity was the most sensitive factor. If landfilling cost increases, MSW separation treatment was recommended by screening first followed with incinerating partially and composting partially with residue landfilling. The possibility of incineration model selection as the optimal technology was affected by the city scale. For big cities and metropolitans with large MSW generation, possibility for constructing large-scale incineration facilities increases, whereas, for middle and small cities, the effectiveness of incinerating waste decreases.
文摘The pressurizing pipeline of hot press resonates under the excitation load,which poses a serious hidden danger to the safety of the equipment and the operator.In order to increase the natural frequency of the pressurizing pipeline,modal analysis of the pressurizing pipeline is carried out to study the mechanism of pipeline vibration and common vibration reduction measures.A method of increasing the natural frequency of the pressurizing pipeline was analyzed.The influence of pipeline clamp assembly stiffness,pipeline clamp number and pipeline clamp installation position on the mode of the pressurizing pipeline is studied.Sensitivity analysis is carried out to study the influence of the various parameters on the mode of the pressurizing pipeline.Genetic algorithm based on Pareto optimality is introduced for multi-objective optimization of pressurizing pipeline.The optimization results show that the natural frequency of the pressurizing pipeline increases by 2.4%and the displacement response is reduced by 17.7%.
基金supported by the National Natural Science Foundation of China(71503103)the Humanities and Social Sciences of Education Ministry(17YJC640233)+4 种基金the Jiangsu Province University Philosophy and Social Sciences for Key Research Program(2017ZDIXM034)the Soft Science Foundation of Jiangsu Province(BR2018005)the Natural Science Foundation of Jiangsu Province(BK20150157)the Fundamental Research Funds for the Central Universities(2019JDZD06)the Key Soft Science Foundation of Wuxi(KX-18-B01)
文摘For the problems of the consistency ranking of the group decision-making scheme,from the view of group negotiation and system coordination,the grey incidence analysis and Nash bargaining model are used to establish a consistency group decision-making method.First,the concepts of the consensus partial decision-making program and the consensus overall ideal decision-making program are defined,and then a multi-object optimization model is constructed based on the satisfaction maximization of group negotiation and deviation minimization of system coordination to determine the consensus partial decision-making program and the consensus overall ideal decision-making program.Moreover,the grey incidence analysis is exploited to measure the close degrees between them.Finally,a real case of the online product evaluation verifies the validity and rationality of the proposed model.
基金SupportedbytheNationalNaturalScienceFoundationofChina (No .60 1 340 1 0 )
文摘A new fuzzification method for multi-objective decision-making and selective sorting is proposed on the basis of the fuzzy consistent relation, and the specific algorithm is presented. The method is applied to the evaluation of highway planning of Zhanjiang city. To decrease the subjectivity in the process of decision-making, the LOWA operator is introduced, and a discussion on how to select appropriate weights involved in multi-objective sorting is made. It is concluded that it is feasible to apply the fuzzy consistent relation to multi-objective decision-making analysis, and the improved fuzzication method is workable.
基金National Natural Science Foundation of China(No.51565019)the Scientific Research Start-Up Program of Tongji University,China(No.20141110)
文摘It is not objective to rate the decision-making factors in the traditional failure mode and effect analysis,so fuzzy semantic theory is used in this paper.Six fuzzy semantic scales and their corresponding semantics are summarized,and a defuzzification method is studied to obtain the fuzzy value table of the six fuzzy semantic scales.For the conflicts between experts in the traditional failure mode and effects analysis,a conflict-resolution algorithm is studied to obtain the failure risk order.Finally,a certain type of industrial valve is used as an example to prove the validity of the theory proposed in this paper.
文摘Driven by the goal of“carbon neutrality,”the increase in use of renewable energy power systems will be inevitable in the future.Uncontrolled output power and random volatility make it difficult to balance power in real time during system operation.Therefore,energy storage is considered to be an effective way to ensure the real-time balance of system power.However,cost of energy storage is relatively expensive.As a solution,energy storage can be used to balance the system power in order to reduce system operating costs.Taking the high proportion of wind power systems as an example,the impact of the“supply side”low-carbon transformation on the economics and reliability of power system operation is explored.In order to solve the problem of power system operation configuration optimization under the background of“carbon neutrality,”this paper establishes a multi-objective programming model.
基金the Catalan Government Predoctoral Schol-arship(AGAUR-FSE 2020 FI_B200147)SuFoRun Marie Sklodowska-Curie Research and Innovation Staff Exchange(RISE)Program(Grant No.691149)the Spanish Ministry of Science and Innovation(PID2020-120355RB-IOO).
文摘Management of forest lands considering multi-functional approaches is the basis to sustain or enhance the provi-sion of specific benefits,while minimizing negative impacts to the environment.Defining a desired management itinerary to a forest depends on a variety of factors,including the forest type,its ecological characteristics,and the social and economic needs of local communities.A strategic assessment of the forest use suitability(FUS)(namely productive,protective,conservation-oriented,social and multi-functional)at regional level,based on the provision of forest ecosystem services and trade-offs between FUS alternatives,can be used to develop management strategies that are tailored to the specific needs and conditions of the forest.The present study assesses the provision of multiple forest ecosystem services and employs a decision model to identify the FUS that sup-ports the most present and productive ecosystem services in each stand in Catalonia.For this purpose,we apply the latest version of the Ecosystem Management Decision Support(EMDS)system,a spatially oriented decision support system that provides accurate results for multi-criteria management.We evaluate 32 metrics and 12 as-sociated ecosystem services indicators to represent the spatial reality of the region.According to the results,the dominant primary use suitability is social,followed by protective and productive.Nevertheless,final assignment of uses is not straightforward and requires an exhaustive analysis of trade-offs between all alternative options,in many cases identifying flexible outcomes,and increasing the representativeness of multi-functional use.The assignment of forest use suitability aims to significantly improve the definition of the most adequate management strategy to be applied.
文摘To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.
文摘Due to double salient structure,Flux Switching Machines(FSMs)are preferred for brushless AC high speed applications.Permanent Magnet(PM)FSMs(PM-FSMs)are suited applicants where high torque density(Tden)and power density(Pden)are the utmost requisite.However conventional PM-FSMs utilizes excessive rare earth PM volume VPM,higher cogging torque Tcog,high torque ripples(Trip)and comparatively lower(Tden)and Pden due to flux leakage.To overcome the aforesaid demerits,a new high(Tden)Segmented PM Consequent Pole(CP)FSM(SPMCPFSM)with flux bridge and barrier is proposed which successfully reduces VPM by 46.52%and PM cost by 46.48%.Moreover,Multi-Objective Optimization(MOO)examines electromagnetic performance due to variation in geometric parameters for global optimum parameters with key metric such as flux linkage(Φpp),flux harmonics(ΦTHD)average torque(Tavg),Tcog,Trip,Tden,average power(Pavg)and Pden.Analysis reveals that MOO improveΦpp by 22.68%,boost Tavg by 11.41%,enhanced Pavg by 4.55%and increased Tden and Pden by 11.41%.Detailed electromagnetic performance comparison with existing state of the art shows that proposed SPMCPFSM offer Tavg maximum up to 88.8%,truncate Trip up to 24.8%,suppress Tcog up to 22.74%,and results 2.45 times Tden and Pden.
基金Supported by National Natural Science Foundation of China(Grant No.51375363)
文摘Scanning ion conductance microscopy(SICM) is an emerging non-destructive surface topography characterization apparatus with nanoscale resolution. However, the low regulating frequency of probe in most existing modulated current based SICM systems increases the system noise, and has difficulty in imaging sample surface with steep height changes. In order to enable SICM to have the capability of imaging surfaces with steep height changes, a novel probe that can be used in the modulated current based bopping mode is designed. The design relies on two piezoelectric ceramics with different travels to separate position adjustment and probe frequency regulation in the Z direction. To fiarther improve the resonant frequency of the probe, the material and the key dimensions for each component of the probe are optimized based on the multi-objective optimization method and the finite element analysis. The optimal design has a resonant frequency of above 10 kHz. To validate the rationality of the designed probe, microstructured grating samples are imaged using the homebuilt modulated current based SICM system. The experimental results indicate that the designed high frequency probe can effectively reduce the spike noise by 26% in the average number of spike noise. The proposed design provides a feasible solution for improving the imaging quality of the existing SICM systems which normally use ordinary probes with relatively low regulating frequency.
基金This work was supported by the National Natural Science Foundation of China(51507087)the Six Talents Summit Project of Jiangsu Province(XNYQC-017)the Science and Technology Planning Project of Nantong City(MS22019017).
文摘The halbach permanent magnet synchronous motor(HPMSM)combines the advantages of permanent magnet motors and halbach arrays,which make it very suitable to act as a robot joint motor,and it can also be used in other fields,such as electric vehicles,wind power generation,etc.At first,the sizing equation is derived and the initial design dimensions are calculated for the HPMSM with the rated power of 275W,based on which the finite element parametric model of the motor is built up and the key structural parameters that affect the total harmonic distortion of air-gap flux density and output torque are determined by analyzing multi-objective sensitivity.Then the structure parameters are optimized by using the cuckoo search algorithm.Last,in view of the problem of local overheating of the motor,an improved stator slot structure is proposed and researched.Under the condition of the same outer dimensions,the electromagnetic performance of the HPMSM before and after the improvement are analyzed and compared by the finite element method.It is found that the improved HPMSM can obtain better performances.
基金Supported by the National Natural Science Foundation of China(60133010,70071042,60073043)
文摘Multi-objective Evolutionary Algorithm (MOEA) is becoming a hot research area and quite a few aspects of MOEAs have been studied and discussed. However there are still few literatures discussing the roles of search and selection operators in MOEAs. This paper studied their roles by solving a case of discrete Multi-objective Optimization Problem (MOP): Multi-objective TSP with a new MOEA. In the new MOEA, We adopt an efficient search operator, which has the properties of both crossover and mutation, to generate the new individuals and chose two selection operators: Family Competition and Population Competition with probabilities to realize selection. The simulation experiments showed that this new MOEA could get good uniform solutions representing the Pareto Front and outperformed SPEA in almost every simulation run on this problem. Furthermore, we analyzed its convergence property using finite Markov chain and proved that it could converge to Pareto Front with probability 1. We also find that the convergence property of MOEAs has much relationship with search and selection operators.
基金Supported by the National Natural Science Foundation of China(51965034)Foudamental Research Funds for the Lanzhou City Innovation and Entrepreneurship Projct(2018-RC-25)。
文摘A multi-objective optimization process for wind turbine steel towers is described in present work.The objective functions are tower top deformation and mass.The tower's height,radius and thickness are considered as design variables.The mathematical relationships between objective functions and variables were predicted by adopting a response surface methodology(RSM).Furthermore,the multi-objective non-dominated sorting genetic algorithm-II(NSGA-II)is adopted to optimize the tower structure to achieve accurate results with the minimum top deformation and total mass.A case study on a 2MW wind turbine tower optimization is given,which computes the desired tower structure parameters.The results are compared with the original tower:a reduction of tower top deformation reduction by about 16.5%and a reduction of a mass by about 1.5%could be achieved for such an optimization process.
基金Financial support from National Science and Technology Major Project of the Ministry of Science and Technology of China(Grant No.2016ZX05017-004)
文摘There exists large space to save energy of high-sulfur natural gas purification process.The multi-objective optimization problem has been investigated to effectively reduce the total comprehensive energy consumption and further improve the production rate of purified gas.A steady-state simulation model of high-sulfur natural gas purification process has been set up by using ProMax.Seven key operating parameters of the purification process have been determined based on the analysis of comprehensive energy consumption distribution.To solve the problem that the process model does not converge in some conditions,back-propagation(BP)neural network has been applied to substitute the simulation model to predict the relative parameters in the optimization model.The uniform design method and the table U21(107)have been applied to design the experiment points for training and testing BP model.High prediction accuracy can be achieved by using the BP model.Nondominated sorting genetic algorithm-II has been developed to optimize the two objectives,and 100 Pareto optimal solutions have been obtained.Three optimal points have been selected and evaluated further.The results demonstrate that the total comprehensive energy consumption is reduced by 13.4%and the production rate of purified gas is improved by 0.2%under the optimized operating conditions.