Seed Germination and Vegetative Propagation of Promising Decorative Lonicera tatarica L. (Caprifoliaceae Juss.), Introduced into the Tashkent Botanical Garden (Uzbekistan)

Seed germination (in laboratory and field conditions) and vegetative reproduction (by cuttings) of a promising decorative species—Lonicera tatarica L. (Caprifoliaceae Juss.) was studied for the first time in the conditions of introduction of the Tashkent Botanical Garden of Uzbekistan. Thus, the optimal temperature for germination of L. tatarica seeds in laboratory conditions is +20°C + 22°C, at which germination was 73%. The germination rate of seeds sown in autumn in the field was 62%, and the germination rate of seeds sown in spring was 71%. It was noted that in greenhouse conditions at an air temperature of 20°C - 22°C and a relative humidity of 49% - 53%, the rootability of cuttings was 75%. It was revealed that the studied species adapted well to the conditions of introduction. Taking into account the effectiveness of vegetative reproduction of L. tatarica, it can be recommended for improving the aesthetic condition and landscaping of cities, landscaping and landscape design.

Analysis and Study on Decorative Art Characteristics of Xianweng Temple in Bofang Village, Gaoping, Shanxi, China

There are many important ancient buildings left in Bofang Village with a long history.The Xianweng Temple located in the north of the village is the only Taoist building in the ancient building group of Bofang Village.Its historical origin can be traced back to Tang and Song dynasties.The temple is a collection of gardens,buildings,painted in one place,all aspects of the achievement is quite high.Through the study of the decorative art characteristics of Xien-weng Temple in Bofang Village,Gaoping,this paper summarizes the artistic characteristics of Taoist architectural decoration in Shanxi,excavates the great value of its existence,and inspires more people to reflect on the protection of ancient buildings.

Effect of Partial Replacement of Fly Ash by Decoration Waste Powder on the Fresh and Mechanical Properties of Geopolymer Masonry Mortar

This study aims to investigate the feasibility of using decoration waste powder(DWP)as a partial replacement for fly ash(FA)in the preparation of geopolymer masonry mortar,and to examine the effect of different DWP replacement rates(0%-40%)on the fresh and mechanical properties of the mortar.The results showed that each group of geopolymer masonry mortar exhibited excellent water retention performance,with a water retention rate of 100%,which was due to the unique geopolymer mortar system and high viscosity of the alkaline activator solution.Compared to the control group,the flowability of the mortar containing lower contents of DWP(10%and 20%)was higher.However,as the DWP replacement rate further increased,the flowability gradually decreased.The DWP could absorb the free water in the reaction system of geopolymer mortar,thereby limiting the occurrence of geopolymerization reaction.The incorporation of DWP in the mortar resulted in a decrease in compressive strength compared to the mortar without DWP.However,even at a replacement rate of 40%,the compressive strength of the mortar still exceeded 15 MPa,which met the requirements of the masonry mortar.It was feasible to use DWP in the geopolymer masonry mortar.Although the addition of DWP caused some performance loss,it did not affect its usability.

Facile Semiconductor p-n Homojunction Nanowires with Strategic p-Type Doping Engineering Combined with Surface Reconstruction for Biosensing Applications

Photosensors with versatile functionalities have emerged as a cornerstone for breakthroughs in the future optoelectronic systems across a wide range of applications.In particular,emerging photoelectrochemical(PEC)-type devices have recently attracted extensive interest in liquid-based biosensing applications due to their natural electrolyte-assisted operating characteristics.Herein,a PEC-type photosensor was carefully designed and constructed by employing gallium nitride(GaN)p-n homojunction semiconductor nanowires on silicon,with the p-GaN segment strategically doped and then decorated with cobalt-nickel oxide(CoNiO_(x)).Essentially,the p-n homojunction configuration with facile p-doping engineering improves carrier separation efficiency and facilitates carrier transfer to the nanowire surface,while CoNiO_(x)decoration further boosts PEC reaction activity and carrier dynamics at the nanowire/electrolyte interface.Consequently,the constructed photosensor achieves a high responsivity of 247.8 mA W^(-1)while simultaneously exhibiting excellent operating stability.Strikingly,based on the remarkable stability and high responsivity of the device,a glucose sensing system was established with a demonstration of glucose level determination in real human serum.This work offers a feasible and universal approach in the pursuit of high-performance bio-related sensing applications via a rational design of PEC devices in the form of nanostructured architecture with strategic doping engineering.

Real-Time Tunable Gas Sensing Platform Based on SnO_(2) Nanoparticles Activated by Blue Micro-Light-Emitting Diodes

Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power consumption.However,despite these benefits,challenges still exist such as a limited range of detectable gases and slow response.In this study,we present a blueμLED-integrated light-activated gas sensor array based on SnO_(2)nanoparticles(NPs)that exhibit excellent sensitivity,tunable selectivity,and rapid detection with micro-watt level power consumption.The optimal power forμLED is observed at the highest gas response,supported by finite-difference time-domain simulation.Additionally,we first report the visible light-activated selective detection of reducing gases using noble metal-decorated SnO_(2)NPs.The noble metals induce catalytic interaction with reducing gases,clearly distinguishing NH3,H2,and C2H5OH.Real-time gas monitoring based on a fully hardwareimplemented light-activated sensing array was demonstrated,opening up new avenues for advancements in light-activated electronic nose technologies.

Nest decoration:Black feathers prevent Crested Mynas from nest usurpation

Nests are important structures for birds to raise their offspring and for signaling.Many birds incorporate feathers into the nest,since feathers were traditionally thought to serve the function of insulation.Hypotheses in recent years have considered that some birds place feathers in conspicuous locations in the nest for decoration to trigger a fear response in the competitors.In this study,we investigated whether decorative feathers could deter nest usurpation by Crested Mynas(Acridotheres cristatellus)by manipulating nest box contents.The results revealed that Crested Mynas preferred black feathers to white feathers as decorations and occupied nest boxes decorated with black feathers significantly less than those decorated with white feathers,suggesting that black decorative feathers in the nest could be more effective in preventing nest usurpation by Crested Mynas and that white decorative feathers may have other functions.The black feathers in the nest are prominently placed at the edge of the nest to convey the message that“this nest is occupied”or“the owner of this nest has been preyed upon”to visitor Crested Mynas,thus effectively preventing them from usurping the nest at a later stage.

Impact of Sharing Marketing on Marketing Willingness of Employees in Internet Decoration Industry

With the development of information technology,sharing marketing,as an innovative marketing method,plays an important role in promoting the marketing willingness and enthusiasm of employees in the Internet decoration industry.Based on the data obtained from the ques-tionnaire survey,this paper makes an empirical analysis of the impact of the economic value,social value,perceived ease of use,perceived convenience,enabling conditions and subjective norms of sharing marketing on the marketing willingness of employees in the Internet decoration industry.The results showed that the questionnaire had good internal consistency and construct validity.Through empirical analysis,it can be found that the economic value,social value,perceived ease of use,perceived convenience,enabling conditions and subjective norms of sharing marketing have a significant positive impact on employees'marketing willingness.

Application Strategies of the Bracket Set in Modern Architectural Design

The Bracket Set(dougong)is an important aspect of traditional Chinese architecture known for its exquisite structure,complexity,and rich variations.This design element has been used since the Qin and Han Dynasties and is still prevalent today.It highlights hierarchy and spiritual connotations in the design of a building.This article explores the application of Bracket Set elements in modern architectural design.It analyzes the specific application strategies of this design element,highlighting its value in modern architecture.The goal is to provide modern architectural designers with multiple perspectives and strategies to fully utilize the advantages of Bracket Set elements in architectural design and enhance the artistic value of their work.

Study on Traditional Architectural Decoration Patterns of Temple of the Three Sus

Temple of the Three Sus,which was first established during the Yuan Dynasty,features a natural,unrestrained,and classically elegant garden architectural style.This paper discusses the multiple characteristics and meanings of traditional architectural decorative patterns at Temple of the Three Sus from a semiotic perspective.First,it analyzes the denotative aspects of these patterns,including their stylistic forms,structural frameworks,and craftsmanship techniques.Second,the paper classifies the traditional architectural decorative patterns of the Temple of the Three Sus based on the types of sources of these patterns and interprets the implied meanings of each.Finally,the paper explores the application of these traditional decorative patterns in modern urban design,specifically in Meishan City,discussing the inheritance and innovation of these patterns in contemporary urban design and emphasizing the importance of integrating tradition with modernity.

Influence of decorative materials on cooling load of residential apartments

The influence of a polyvinyl chloride（PVC）-panel on the cooling load of a residential apartment in Mashad,Iran,is analyzed by the DeST-h software.And the summer natural ventilation of the residential apartment is investigated to determine the wind speed into the apartment through the computational fluid dynamics software.The evaluation results of the indoor wind velocity show that most parts of the apartment are comfortable.The cooling load of the penthouse can be decreased about 10.5% or 6.5% when an air layer exists or does not exist between the ceiling and the PVC-panel,respectively,indicating that the existence of the air layer can decrease the cooling load.However,the effect of the increase in the air layer＇s thickness on the decrease in the cooling load is obvious.Adding a thin layer of air between the ceiling and the PVC-panel is a good step toward sustainable buildings.

Impregnated Paper-Based Decorative Laminates Prepared from Lignin-Substituted Phenolic Resins

High Pressure Laminates(HPL)panels consist of stacks of self-gluing paper sheets soaked with phenol-formaldehyde(PF)resins.An important requirement for such PFs is that they must rapidly penetrate and saturate the paper pores.Partially substituting phenol with bio-based phenolic chemicals like lignin changes the physico-chemical properties of the resin and affects its ability to penetrate the paper.In this study,PF formulations containing different proportions of lignosulfonate and kraft lignin were used to prepare paper-based laminates.The penetration of a Kraft paper sheet was characterized by a recently introduced,new device measuring the conductivity between both sides of the paper sheet after a drop of resin was placed on the surface and allowed to penetrate the sheet.The main target value measured was the time required for a specific resin to completely penetrate the defined paper sample(“penetration time”).This penetration time generally depends on the molecular weight distribution,the flow behavior and the polarity of the resin which in turn are dependent on the manufacturing conditions of the resin.In the present study,the influences of the three process factors:(1)type of lignin material used for substitution,(2)lignin modification by phenolation and(3)degree of phenol substitution on the penetration times of various lignin-phenolic hybrid impregnation resins were studied using a complete twolevel three-factorial experimental design.Thin laminates made with the resins diluted in methanol were mechanically tested in terms of tensile and flexural strains,and their cross-sections were studied by light microscopy.

Combination of Daur Clothing Decorative Art and Modern Fashion Design

On today＇s clothes market and international fashion stage, the dress adornment elements of ethnic minorities have always deeply impressed design masters, received great attention and, are constantly surprising fashion designers. China is a country with multiple ethnic minorities, which have extremely rich ethnic minority dresses and adornment elements. On studying the major dress adornment elements of the Daur, a typical ethnic minority in northern China, we have discovered their strong ethnic features. The major dress adornment elements of the Daur were with the purpose to explore and continue traditions. Combining the modern faskion design with the delicate decorative art that the Daur people sew various laces and embroideries on their dresses, was to discover and use the essence of Chinese ethnic dress and adornments, and demonstrate the talent of ethnic minorities in clothes design. Given what have been founded, combined with the application of modern design methods, the adornment elements of ethnic dresses can represent their ethnic characteristics as well as reflecting the sense of the modern age.

Application of Facade Decorative Arts of Traditional Architecture in Archaistic Blocks:A Case Study of Shengjinta Food Street in Nanchang City

Architectural decoration is a key demonstration of architectural styles, and traditional Chinese architectural forms originating from diversified architectural decorative arts. This paper explored facade decorative art of traditional architecture from the perspectives of carving art decoration, roof type, stylobate and railing, window and door type, and ground pavement, and also elaborated artistic methods of different forms in each aspect. On the basis of investigating Shengjinta historic and archaistic block, the paper also introduced application of decorative arts, and provided references for applying facade decorative arts of traditional architecture in the future archaistic blocks.

INFLUENCE OF ZnO AND BaO CONTENTS ON SINTERING AND CRYSTALLIZATION OF GLASSCERAMIC DECORATIVE MATERIALS

In this paper ,the influence of ZnO and BaO contents on sintering and crystallization of decorative materi-al in the system of CaO-Al2O3-SiO2wwas studied. The opti-mum ZnO 9 BaO contents and sintering or crystallization tem-perature for the glass-ceramic were determined.

Research on Printing Quality Evaluation of Decorative Paper Based on AHPEWM Model

Printing quality evaluation is an important means to check whether prints are qualfied.However,the urrent printing quality evaluation system for gravure decorative paper is not perfect.In order to solve this problem,a method for evaluating quality of decorative paper based on analytical hierarchy process(AHP)and the entropy weight method(EWM)model is proposed in this paper.So as to verify the proposed model,decorative paper of different grades was selected as the experimental objects.Firstly,the data about five indices eflecting printing quality were measured.Secondly,the evaluation model was used to assign weights to the indices,and scores in each index were calculated according to scoring tables.Finally,the evalua tion scores were statistically analyzed.The results of data analysis showed that the 95% confidence intervals and coefficients of variation were small.The average error of the evaluation system was 0.2061.It indicates that the model can stably distinguish decorative paper of diferent grades,accuracy of which is high.The research in this paper can provide reference to the quality improvement of decorative paper and the printing quality evaluation of other paper.

Decorative Wood Fiber/High-Density Polyethylene Composite with Canvas or Polyester Fabric

Wood-plastic composite is an environmentally friendly material,due to its use of recycled thermoplastics and plant fibers.However,its surface lacks attractive aesthetic qualities.In this paper,a method of decorating wood fiber/high-density polyethylene(WF/HDPE)without adding adhesive was explored.Canvas or polyester fabrics were selected as the surface decoration materials.The influence of hot-pressing temperature and WF/HDPE ratio on the adhesion was studied.The surface bonding strength,water resistance,and surface color were evaluated,and observation within the infrared spectrum and under scanning electron microscopy was used to analyze the bonding process.The results showed that the fabric and WF/HDPE substrate could be closely laminated together depending on the HDPE layer accumulated on the WF/HDPE surface.The molten HDPE matrix penetrates canvas more easily than polyester fabric,and the canvasveneered composite shows a greater bonding strength than does the polyester fabric-veneered composite.A higher proportion of the thermoplastic component in the substrate improved the bonding.When the hot-pressing temperature exceeded 160°C,the fabric-veneered WF/HDPE panels had greater water resistance,although the canvas fabric changed more obviously in terms of fiber shape and color,compared with the polyester fabric.For the canvas fabric,140°C–160°C was a suitable hot-pressing temperature,whereas 160°C–180°C was more suitable for polyester fabric.The proportion of the thermoplastic component in the composite should be not less than 30%to achieve adequate bonding strength.

Practical Analysis on the Integration of Fair-faced Concrete Decorative Elements into Modern Interior Design

Interior design market in China has put forward higher requirements on development of design denotation and enrichment of design connotation.Traditional interior design means and methods have been unable to meet the colorful and diversified needs of contemporary people.Therefore,current interior modern design should actively innovate and reform,and change the traditional thinking mode of modern interior design.The rapid development of the market forces the design circle to constantly deepen the reform,make bold innovations,and comprehensively improve the level of design,so as to adapt to the development of the market.In view of this,this paper analyzes application methods,techniques and means of fair-faced concrete decorative elements in modern interior design,and fully understands the basic attribute characteristics of fair-faced concrete decorative elements;moreover,the design characteristics are analyzed to find out the rule of relevant decorative elements in modern interior design,so as to better carry out the design effort,improve the overall design level,and lay a solid foundation for subsequent development.

Current Situation and Suggestions of Decorative Fishery Development in Hainan Province

Decorative fishery is an important part of recreational fisheries,Hainan has the potential to develop decorative fishery.In this paper,on the basis of the deep-going survey on the current situation of decorative fishery development in Hainan,the main questions of decorative fish cultivation and market were discussed.At the same time,many suggestions were brought up,such as exploiting the biological resources of Hainan Island,strengthening scientific research efforts,introducing new varieties of ornamental species,strengthening industrial guidance and market management,etc.,which will benefit the rational utilization of tropical biological resources and increase the whole competitive advantage of decorative fishery in Hainan Province.

Decorative Arts of the Qing-Style Pedestal of Outdoor Furnishings

The pedestal of outdoor furnishings is a facility of courtyard outdoor furnishings. It is an important part of ceremonial furnishings in official buildings. The Qing-style pedestal of outdoor furnishings has unique shapes and ornamentations as well as rich artistic connotation. In addition to having significant artistic value and historical value, it also embodies the user’s aesthetic taste.

Decorative Art of Doors and Windows in Southern Jiangxi:Taking Bailu Ancient Village as an Example

China,as a country with 56 ethnic groups,has different geographical location,historical development and national customs.Residents in different places have incorporated different cultural characteristics when building local houses.This differentiated cultural and artistic feature is a reflection of the cultural connotation in a specific age and region.However,cultural protection is not always perfect.Many details are missed in this torrent of conservation culture,and door and window decorations are in this position.When collecting data,it is found that there is very little research on door and window decoration in Jiangxi.In this study,taking the doors and windows of Bailu Ancient Village as an example,combined with the cultural history of door and window decoration in southern Jiangxi,the artistic essence and historical value of the decorative patterns of houses were discussed.After searching a large number of documents,a field investigation was conducted in Bailu Ancient Village.Through direct observation of doors and windows and asking local residents about their understanding of door and window decoration,the history,current situation and future of door and window decoration in Bailu Ancient Village were described in detailed and predicted roughly.