Synthetic polymers:A review of applications in drilling fluids

With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various complications.Currently,reagents based on modified natural polymers(which are naturally occurring compounds)and synthetic polymers(SPs)which are polymeric compounds created industrially,are widely used to prevent emerging complications in the drilling process.However,compared to modified natural polymers,SPs form a family of high-molecular-weight compounds that are fully synthesized by undergoing chemical polymerization reactions.SPs provide substantial flexibility in their design.Moreover,their size and chemical composition can be adjusted to provide properties for nearly all the functional objectives of drilling fluids.They can be classified based on chemical ingredients,type of reaction,and their responses to heating.However,some of SPs,due to their structural characteristics,have a high cost,a poor temperature and salt resistance in drilling fluids,and degradation begins when the temperature reaches 130℃.These drawbacks prevent SP use in some medium and deep wells.Thus,this review addresses the historical development,the characteristics,manufacturing methods,classification,and the applications of SPs in drilling fluids.The contributions of SPs as additives to drilling fluids to enhance rheology,filtrate generation,carrying of cuttings,fluid lubricity,and clay/shale stability are explained in detail.The mechanisms,impacts,and advances achieved when SPs are added to drilling fluids are also described.The typical challenges encountered by SPs when deployed in drilling fluids and their advantages and drawbacks are also discussed.Economic issues also impact the applications of SPs in drilling fluids.Consequently,the cost of the most relevant SPs,and the monomers used in their synthesis,are assessed.Environmental impacts of SPs when deployed in drilling fluids,and their manufacturing processes are identified,together with advances in SP-treatment methods aimed at reducing those impacts.Recommendations for required future research addressing SP property and performance gaps are provided.

Crack stop holes in steel bridge decks:Drilling method and effects

Force analysis using a compact tension model, as recommended by ASTM, was carried out on a crack stop hole. The stress before, and after, drilling the hole was compared in terms of stress concentration and stress gradient. The optimum drilling location and diameter were studied through analysis of different locations and diameters. By analyzing the effects of flank holes and an additional hole, drilling advice was proposed and fatigue testing of the cracks in a steel bridge deck with a crack stop hole was conducted. The results show that the stress at the crack tip with a crack stop hole decreased, and the major principal stress around the hole was distributed accordingly. The optimum position of the crack stop hole centre was where the centre of the crack stop hole was situated behind the crack and the hole edge coincided with the crack tip. Therefore, hole diameters larger than 8 mm, or those weakening the section by 10%, were suggested as the best diameters. In terms of multi-hole crack stopping, a flank hole was not recommended. The optimum horizontal position of flank holes was at a distance of 1/4 of a single hole diameter from, and in front of, the single hole. Besides, the experiment showed that crack stop hole could only prevent cracks from growing and had no influence on crack growth rate.

Hole Cleaning Prediction in Foam Drilling Using Artificial Neural Network and Multiple Linear Regression

Foam drilling is increasingly used to develop low pressure reservoirs or highly depleted mature reservoirs because of minimizing the formation damage and potential hazardous drilling problems. Prediction of the cuttings concentration in the wellbore annulus as a function of operational drilling parameters such as wellbore geometry, pumping rate, drilling fluid rheology and density and maximum drilling rate is very important for optimizing these parameters. This paper describes a simple and more reliable artificial neural network (ANN) method and multiple linear regression (MLR) to predict cuttings concentration during foam drilling operation. This model is applicable for various borehole conditions using some critical parameters associated with foam velocity, foam quality, hole geometry, subsurface condition (pressure and temperature) and pipe rotation. The average absolute percent relative error (AAPE) between the experimental cuttings concentration and ANN model is less than 6%, and using MLR, AAPE is less than 9%. A comparison of the ANN and mechanistic model was done. The AAPE values for all datasets in this study were 3.2%, 8.5% and 10.3% for ANN model, MLR model and mechanistic model respectively. The results show high ability of ANN in prediction with respect to statistical methods.

Hole-drilling method using grating rosette and Moire interferometry

The hole-drilling method is one of the most wellknown methods for measuring residual stresses. To identify unknown plane stresses in a specimen, a circular hole is first drilled in the infinite plate under plane stress, then the strains resulting from the hole drilling is measured. The strains may be acquired from interpreting the Moire signature around the hole. In crossed grating Moire interferometry, the horizontal and vertical displacement fields （u and v） can be obtained to determinate two strain fields and one shearing strain field. In this paper, by means of Moire interferometry and three directions grating （grating rosette） developed by the authors, three displacement fields （u, v and s） are obtained to acquire three strain fields. As a practical application, the hole-drilling method is adopted to measure the relief strains for aluminum and fiber reinforced composite. It is a step by step method; in each step a single laminate or equivalent depth is drilled to find some relationships between the drilling depth and the residual strains relieved in the fiber reinforced composite materials.

Stability and nonlinear dynamic behavior of drilling shaft system in copper stave deep hole drilling

The stability and nonlinear dynamic behavior of drilling shaft system in copper stave deep hole drilling were analyzed. The effects of the fluctuation of the cutting force, the mass eccentricity and the hydrodynamic forces of cutting fluid could be taken into consideration in the model of drilling shaft system. Based on the isoparametric finite element method, the variational form of Reynolds equation in hydrodynamic fluid was used to calculate nonlinear hydrodynamic forces and their Jacobian matrices simultaneously. In the stability analysis, a new shooting method for rapidly determining the periodic orbit of the nonlinear drilling shaft system and its period was presented by rebuilding the traditional shooting method and changing the time scale. Through the combination of theories with experiment, the correctness and effectiveness of the above methods are verified by using the Floquet theory. The results show that the mass eccentricity can inhibit the whirling motion of drilling shaft to some extent.

Residual Stress Measurement for Ion-implanted NiTi Alloy by Using Moiré Interferometry and Hole-drilling Combined Method

Residual stresses in ion-implanted NiTi alloy are measured by a combined method ofMoir6 interferometry and hole-drilling. Oxygen ions are implanted into the NiTi alloy under a voltage of 30 kV by a dose of 1.0×10^17ions/cm^2 for one hour. Subsequently, in order to avoid dimensional error, a hole is drilled exactly in the center of the sample. The distribution of residual stresses around the hole is measured. It is indicated that the method which combines the Moire interferometry with hole-drilling is able to be used to measure residual stresses produced by ion implantation.

FGC-15D large-diameter DTH air hammer drilling system and its application in offshore rock-socketed pile hole drilling

In the past two decades,numerous large-diameter rock-socketed piles were constructed in China to support foundations of skyscrapers,great bridges or to retain soil in potential geological hazard areas.However,drilling large-diameter rock-socketed pile holes with conventional drilling method such as rotary drilling or cable tool drilling is time-consuming and the cost is usually very high.In order to drill large-diameter rock-socketed pile holes faster at relatively low cost,the FGC15A large-diameter DTH air hammer drilling system was developed in 1987 and was given the second-class award by Ministry of Geology and Mineral Resources in 1991.Since it was innovated the drilling system has been used in more than twenty important and tough projects on land,and wonderful results were acquired.At the same time the large-diameter DTH air hammer drilling system was improved continuously.The FGC15D is the latest version of the technique.

Exploration and determination of the principles of rotary-percussive underground slimhole drilling

A possibility of the efficient use of rotary percussive drilling to provide drilling smaller diameter holes(40–70 mm) both in mining and prospecting is disclosed herein. A new construction designed for the nipple thread connection is described. The relative amplitude variation, change of power pulse time and energy in their propagation throughout the drilling tool are determined. A possibility of the efficient power pulse transfer along the drill string to the rock destruction tools with new nipple connections which allow automating the make-up and breakout system of drill pipe was supported by experiments.

Permittivity of composites used for Luneburg lens antennas by drilling holes based on 3-D printing technique

Due to the attractive performances such as the ability of beam focus,broadband,multi-beam scanning and other features,Luneburg lens antennas are applied in multi-beam antenna,which overcomes the problem of gain loss produced by multi-beam parabolic antenna.Based on 3-D printing technique,Luneburg lens antennas by drilling holes are studied.Permittivity and loss tangent of the equivalent lens materials can be influenced by original materials,hole shapes,hole directions,and porosity.After tests,polystyrene with waxes may be the most appropriate materials for Luneburg lens with high strength.Permittivity with the shape of triangle is the lowest due to the homogeneity.Relative permittivities with the direction at a range of 15°-45°are lower while loss tangent at a range of 0°-30°.Radial directional holes are more appropriate for Luneburg lens.The relative permittivity is decreased with the increment of porosity.After calculations,the forecasts calculated by Looyenga and A-BG theory are more precise.Finally,Luneburg lens with two layers is fabricated by 3-D printing.

Automatic Modification of Local Drilling Holes via Double Pre-Assembly Holes

Manufacturing accuracy, especially position accuracy of fastener holes, directly affects service life and security of aircraft. The traditional modification has poor robustness, while the modification based on laser tracker costs too much. To improve the relative position accuracy of aircraft assembly drilling, and ensure the hole-edge distance requirement, a method was presented to modify the coordinates of drilling holes. Based on online inspecting two positions of pre-assembly holes and their theoretical coordinates, the spatial coordinate transformation matrix of modification could be calculated. Thus the straight drilling holes could be modified. The method improves relative position accuracy of drilling on simple structure effectively. And it reduces the requirement of absolute position accuracy and the cost of position modification. And the process technician also can use this method to decide the position accuracy of different pre-assembly holes based on the accuracy requirement of assembly holes.

Micro Electrical Discharge Machining(μEDM):Holes Drilling and Characterization of the Process Parameters

μEDM(micro-electrical discharge machining)is a process for machining conductive materials without mechanical contact;it is particularly suitable for machining hard materials.The principle consists in creating electrical discharges between a micro-tool and a workpiece,both of which are immersed in a dielectric.It is a complementary process to mechanical,laser,micro-machining techniques,and even to techniques derived from silicon microtechnology(RIE,DRIE,LIGA).However,the resolution ofμEDM is limited;it depends on several electrical and physical parameters.The goal of this paper is to characterize the holes obtained by drilling usingμEDM with different micro-tool diameters(Φ=250μm;Φ=80μm;Φ=40μm;Φ=20μm)for an experimental time of t=2 h.The results obtained let us conclude that a large diameter micro-tool(Φ=250μm)leads to removing a larger amount of material(43×10^(5)μm^(3))than small diameters:Φ=80μm;Φ=40μm;Φ=20μm where the removed volume is equal to 2.6×10^(5)μm^(3);105μm^(3);0.4×10^(5)μm^(3),respectively.The electrode-tool diameter influences the maximum depth of the holes;a diameter ofΦ=250μm generates a hole where the maximum depth is 170μm while small diameters:Φ=80μm;Φ=40μm;Φ=20μm provide holes with a depth of 82μm;51μm;50μm respectively.Through these experiments,we can also conclude that the lateral gap of the holes is almost constant.It is about 40μm whatever the diameter.

Study on Plasticity Modification for Measuring High Residual Stress by Hole-Drilling Method

Hole-drilling method is a commonly used method for measuring residual stress. The calibration coefficients in ASTM E837-13 a would cause large errors due to the plasticity deformation of materials. In the study, calibration coefficients were modified in the plasticity deformation stage based on the distortion energy theory. The calibration experiment of calibration coefficients was simulated by the finite element model, and the plasticity modification formulas of 7075 aluminum alloy were obtained. From the results of uniaxial tensile loading test, the measuring errors of high residual stress are significantly reduced from-4.071%～53.440% to-5.140% ～ 0.609% after the plasticity modification. This work provides an effective way to expand the application of hole-drilling method.

APPLICATION OF DIAMOND TWIST DRILL FOR DRILLING HARD-BRITTLE MATERIALS

提出了硬脆材料孔加工新方法，介绍了金刚石麻花钻的电沉积制造工艺，将研制出的钻头应用于玻璃、大理石、花岗石以及氧化铝陶瓷等硬脆材料的孔加工实验。结果表明，使用该钻头不仅可以有较高的钻削效率，而且可以获得较好的孔进口与出口精度。最后对该技术的应用前景进行了讨论。

Influence of friction on buckling of a drill string in the circular channel of a bore hole

Enhancement of technology and techniques for drilling deep directed oil and gas bore hole is one of the most important problems of the current petroleum industry.Not infrequently, the drilling of these bore holes is attended by occurrence of extraordinary situations associated with technical accidents. Among these is the Eulerian loss of stability of a drill string in the channel of a curvilinear bore hole. Methods of computer simulation should play a dominant role in prediction of these states. In this paper, a new statement of the problem of critical buckling of the drill strings in 3D curvilinear bore holes is proposed. It is based on combined use of the theory of curvilinear elastic rods, Eulerian theory of stability, theory of channel surfaces, and methods of classical mechanics of systems with nonlinear constraints. It is noted that the stated problem is singularly perturbed and its solutions have the shapes of localized harmonic wavelets. The calculation results showed that the friction effects lead to essential redistribution of internal axial forces, as well as changing the eigenmode shapes and sites of their localization. These features make the buckling phenomena less predictable and raise the role of computer simulation of these effects.

Theoretical and Experimental Analysis on Influence of Revolution Radius in Orbital Drilling

Revolution radius is one of the significant parameters in orbital drilling,which has great influence on many factors,such as the cutting area of front and side cutting edge,undeformed chip geometry,delamination and burr at hole exit side,hole surface roughness,cutting tool force and deflection,chip removal and heat transmission.First,the influence of revolution radius on the factors is discussed theoretically in detail.Analysis results show that big revolution radius can reduce axial cutting force,restrain exit delamination and burr,and improve chip removal and heat transmission.Then,single factor test and orthogonal test are utilized in the two processing methods as machining unidiameter holes with several cutting tools and machining different diameter holes with one tool.Finally,the influence of revolution radius on cutting force and hole machining precision is studied.These results provide a profound foundation for future optimization of cutting control parameters.

ESR and U-series ages of coral reef samples from shallow drill holes in the South China Sea

The ages of coral reef samples from several shallow drill holes in the South China Sea are determined by ESR and U-series (230Th/234U) methods. The experimental results show ideal agreement between ESR and U-series ages and that the coral reefs were formed in the early Holocene. In the determination of natural total dose of coral reef by use of the additive dose method good results can be obtained by exponential fitting, no matter how the effect of dose saturation is. It was found that the ratio of the natural ESR signal intensity ( I0) to the ESR signal intensity at dose saturation ( Imax) of sample can reflect the significance of a irradiation efficiency-k value. Using the k value of sample determined by the formula given in this paper, the precision of ESR dating of marine carbonates can be improved.

Influence of process parameters on drilling characteristics of Al 1050 sheet with thickness of 0.2 mm using pulsed Nd:YAG laser

The object of this work is to investigate the influence of process parameters on drilling characteristics of an Al 1050 sheet with a thickness of 0.2 mm using a pulsed Nd:YAG laser through numerical analyses and experiments. By comparing the numerical analyses with the experiments, a proper numerical model was obtained. From the results of the numerical analyses and the experiments, the effects of process parameters on entrance diameters of drilled holes, shapes of the holes, taper angles of the holes and temperature distributions in the vicinity of the holes were examined quantitatively. In addition, the optimal drilling condition was estimated to improve the quality of the drilled holes.

A High-Mathematical Model Optimizing Cuttings Transport in Oil Drilling Engineering

With special drilling operation equipment and specific conditions of geology, how does drilling fluid carry cuttings effectively? So far, it is still an urgent problem for drilling researchers to study. This work just aims at the actual engineering background to develop studying model. In this paper, according to non Newtonian fluid mechanics, the law of the solid liquid, two phase fluid flow and actual drilling engineering, the major factors affecting cuttings transport are drilling fluid velocity, hole inclination and fluid rheological properties. Getting a clear understanding of the law of drilling fluid and its cutting taking mechanism, this paper puts forward a model for analysis of field data and quantitative forecast of cutting taking capability of drilling fluid. The full scale annular test section was 6.1 m with 76 and 114 mm drillpipe in a 203 mm ID (wellbore diameter). Hole angle varied from 0° to 90°.

A novel predictive model of drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids

In oil and gas well drilling operations,it is of great significance to accurately predict the drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids.In this paper,the free-falling of 172 groups of spheres and 522 groups of irregular-shaped sand particles in Newtonian/non-Newtonian fluids were investigated experimentally.It was found that the drag coefficient calculated based on Newtonian correlations can result in a significant error when the particle settles in the non-Newtonian fluid.Therefore,predictive models of drag coefficient were established respectively for different types of fluids.The validity of the proposed drag coefficient model of spheres was verified by comparing it with the previous works.On this basis,the drag coefficient model of irregular-shaped sand particles was established by introducing a shape factor.The models do not use the shape factor that requires detailed threedimensional shape and size information.Instead,two-dimensional geometric information(circularity)is obtained via image analysis techniques.The present new models predict the settling velocity of sand particles in the power-law fluid and Herschel-Bulkley fluid accurately with a mean relative error of5.03%and 6.74%,respectively,which verifies the accuracy of the model.