Exploration of cyclooxygenase-2 inhibitory peptides from walnut dreg proteins based on in silico and in vitro analysis

Walnut dreg protein hydrolysates(WDPHs)exhibit a variety of biological activities,however,the cyclooxygenase-2(COX-2)inhibitory peptide of WDPHs remain unclear.The aim of this study was to rapidly screen for such peptides in WDPHs through a combination of in silico and in vitro analysis.In total,1262 peptide sequences were observed by nano liquid chromatography/tandem mass spectrometry(nano LC-MS/MS)and 4 novel COX-2 inhibitory peptides(AGFP,FPGA,LFPD,and VGFP)were identified.Enzyme kinetic data indicated that AGFP,FPGA,and LFPD displayed mixed-type COX-2 inhibition,whereas VGFP was a non-competitive inhibitor.This is mainly because the peptides form hydrogen bonds and hydrophobic interactions with residues in the COX-2 active site.These results demonstrate that computer analysis combined with in vitro evaluation allows for rapid screening of COX-2 inhibitory peptides in walnut protein dregs.

Chemical composition of walnuts from three regions in China

To reveal the characteristic chemicals of walnuts from different origins, we analyzed fatty acid composition,tocopherols, phytosterols and total phenolic content (TPC) of walnuts from three main producing regions inChina. The results showed that walnuts were rich in polyunsaturated fatty acids, and the ratio of ω-6 to ω-3 fattyacids was close to the recommendation of Chinese Nutrition Society. Moreover, walnuts contain high contents oftocopherols (331.20–414.71 mg/kg), phytosterols (97.17–110.35 mg/100 g) and phenols (38.51–48.08 mg GAE/kg). Significant chemical differences exist among walnuts from three production regions. The highest content ofpolyunsaturated fatty acids was found in walnuts from the northern China, the highest content of tocopherols inwalnuts from southwest China, and the highest contents of phytosterol and TPC in walnuts from northwest China.However, there was no significant difference in the tocopherol, phytosterol and TPC content of walnuts betweenthe Northern China and Northwest China. The above results provide important references for manufacturers andconsumers to select suitable walnut scientifically and reasonably.

The Physiological and Molecular Responses of Exogenous Selenium to Selenium Content and Fruit Quality in Walnut

To study the effect of exogenous selenium on fruit quality in walnut(Juglans regia L.),8-year-old walnut(Qingxiang)was taken as the research object.In the fruit expansion stage,300 mg/L of sodium selenate,yeast selenium and sodium selenite solutions were applied on the leaf of walnut,and the selenium levels in leaves,pericarp and kernel were determined at the ripening stage.The fruit quality,mineral nutrient content,antioxidant enzyme activity,and related genes’expression were analyzed.The results showed that the three exogenous selenium increased the selenium levels in leaves,pericarp and kernel of walnut.They also significantly increased fruit and kernel weights,and kernel linoleic acid,but markedly decreased kernel crude fat and saturated fatty acid.Selenium spraying promoted the absorption of mineral nutrients such as potassium and zinc,but inhibited the absorption of calcium,and had no significant effect on iron and magnesium in the kernel.Three exogenous selenium increased the activities of superoxide dismutase(SOD),peroxidase(POD),ascorbate peroxidase(APX),and catalase(CAT)significantly in the kernel.Except for sodium selenate treatment significantly reduced malondialdehyde(MDA)content in the kernel,the other two selenium sources treatments had no significant effect on MDA and hydrogen peroxide(H2O2)levels.They also increased the expression of JrCu/Zn-SOD,Jr2-Cys POD,JrCyt-APX and JrCAT in kernel,to different extents.These implies that,in the walnut fruit enlargement period,the foliar spraying selenium could increase the selenium content of walnut,affect the mineral nutrient absorption,improve the antioxidant capacity and related genes’expression,and reduce the degree of peroxide,and then improve the quality of fruit.Furthermore,yeast selenium showed the comprehensive effect of the best.

Simulation Analysis of Stress Field of Walnut Shell Composite Powder in Laser Additive Manufacturing Forming

A calculation model of stress field in laser additive manufacturing of walnut shell composite powder(walnut shell/Co-PES powder)was established.The DFLUX subroutine was used to implement the moveable application of a double ellipsoid heat source by considering the mechanical properties varying with temperature.The stress field was simulated by the sequential coupling method,and the experimental results were in good accordance with the simulation results.In addition,the distribution and variation of stress and strain field were obtained in the process of laser additive manufacturing of walnut shell composite powder.The displacement of laser additive manufacturing walnut shell composite parts gradually decreased with increasing preheating temperature,decreasing laser power and increasing scanning speed.During the cooling process,the displacement of laser additive manufacturing of walnut shell composite parts gradually increased with the increasing preheating temperature,decreasing scanning speed and increasing laser power.

Synthesis of Modified Walnut Shell Biochar and Its Performance of Cadmium Adsorption

Biochar is a functional and environmentally friendly material mainly made from by-products of industrial and agricultural production as raw material, which is cracked at high temperatures and slow speeds. The preparation of biochar requires the thermochemical conversion of biomass in an oxygen-restricted environment. Different raw materials and preparation processes result in biochar with different internal structures and biofunctional groups, which often have different properties. Adsorption of heavy metal pollutants is one of the main research directions for biochar application, and there are still areas that can be improved in the current research for biochar for treating heavy metal wastewater. In this study, we take the treatment of cadmium-containing wastewater as an example, walnut shell biochar (WSBC) as a carrier, iron(VI) compounds as a modifying reagent, and test the performance of cadmium-containing wastewater treatment using simulated cadmium-containing wastewater by adjusting the pyrolysis process and modification method at the same time to find the optimal experimental scheme, and give a reasonable theoretical explanation in relation to the results of the characterization tests, such as SEM, FT-IR, and so on. The characterized results show that iron(VI) compound (K2FeO4)-modified WSBC has a significant ability to remove cadmium contamination in the wastewater (remove 96.62% of cadmium in 1 minute), and its structure is different from other iron compound-modified ones. The aim of this study is to improve the efficiency of cadmium adsorption by specific types of biochar, while realizing the whole process as environmentally friendly as possible.

Characterization of Unsaturated Polyester Filled with Waste Coconut Shells, Walnut Shells, and Carbon Fibers

This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experiments were used to determine the optimal combination of parameters.In particular,an erosion device con-sisting of a motor with a constantflow rate of 45 L/min,a pump with a diameter of 40 mm,a nozzle with a dia-meter of 5 mm,and a tank made of“perspex glass”55 cm long,30 cm tall,and 25 cm wide was used.The tests were conducted by varying the sample-to-nozzle distance,the pattern angle,and the sand particle size.The results have revealed that the presence of 7.5%by weight of waste coconut shell,for conditions corresponding to 90°angle,sand size 425μm,stand distance 30 cm,gives the best wear resistance(3.04×10^(-5) g/g).Thefiller content and sand particle size affect the erosive rate,with the angle playing a secondary role.The distance between the sample and the nozzle has a weaker effect on erosive wear.The hardness results show that the models(UP-5%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste coconut shell)give the best values for prayer compared to the samples(UP-5 wt.%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste walnut shell).

核桃青皮粉及其提取物对猪生长性能、胴体性状和肉品质的影响

【目的】研究核桃青皮粉及其提取物对育肥猪生长性能、胴体和肉质性状的影响。【方法】选取90头健康、体重约80 kg的“杜×长×大”三元杂交育肥阉公猪,随机分为3组,每组3个重复,每个重复10头猪。对照组育肥猪饲喂基础饲粮,核桃青皮粉试验组及其提取物试验组分别在基础饲粮中添加0.1%核桃青皮粉和0.1%核桃青皮粉提取物。预试期10 d,正试期40 d。试验第41天,测定每头猪初始体重、终末体重及各组采食量。试验结束后,每个重复中选取2头体重接近平均体重的试验猪进行屠宰,测定胴体性状、肉质性状,以及背最长肌的氨基酸和脂肪酸含量。【结果】与对照组相比,饲粮中添加核桃青皮粉或其提取物对育肥猪末重、平均日增重、平均日采食量、料重比、胴体直长、胴体斜长、胴体重、屠宰率、眼肌面积、板油重以及背最长肌pH_(45 min)、滴水损失、加压损失、大理石纹评分、红度均无显著影响(P>0.05),但可显著提高育肥猪背膘厚、背最长肌黄度和肌内脂肪含量(P<0.05)。与对照组相比,除了组氨酸,核桃青皮粉组育肥猪背最长肌中其他氨基酸含量均有一定提高,而核桃青皮提取物组的氨基酸含量与对照组的差异不大,核桃青皮粉组和提取物组多不饱和脂肪酸总含量均比对照组含量有一定提高。【结论】饲粮添加0.1%核桃青皮粉及其提取物对生长性能和胴体性状无负面影响,二者均可改善育肥猪肉质性状,核桃青皮粉效果更佳。

青皮核桃采摘机械臂设计与仿真

针对大多数核桃种植区采摘核桃仍为人工采摘,效率低下、用工多等问题,设计了一种机械臂和末端执行器协作的采摘装置。首先,采用SolidWorks建立虚拟样机,对末端执行器进行受力分析并且利用ANSYS Workbench中的Static Structural模块对末端执行器关键部件进行静力学分析,得到手指最大应力为17.69 MPa,能够完成果实抓取任务。然后,采用D-H法对机械臂建模,使用MATLAB软件的机器人工具箱(Robotics Toolbox)进行建立机械臂数字模型,并对其进行工作区间分析和轨迹规划仿真。结果表明,所选机械臂和末端执行器能够满足设计要求。

‘陇核5号’果实发育规律及疏果施肥对坚果品质的影响

【目的】明确核桃果实发育规律及影响坚果品质的因素,为核桃果园生产管理提供参考。【方法】以‘陇核5号’为研究对象,对其果实发育过程中外观形态变化进行拍照记录,测定果实三径、果实质量、果皮厚度、坚果三径、坚果质量、核仁质量、出仁率、壳厚等指标,利用Logistic方程、二次方程、三次方程等模型对各指标变化趋势进行拟合。通过疏果和不同时期喷施叶面肥,分析不同处理对核桃坚果经济性状的影响。【结果】在发育过程中,果实(坚果)大小和质量均表现为缓慢增长、迅速增长、缓慢增长的趋势,其中果实质量分别在花后50 d时和花后100 d时出现了增长高峰,坚果质量在花后110 d时出现了增长高峰。花后30~40 d时果实缓慢增长,随后迅速膨大,果实质量快速增加,花后50 d时开始出现水状核仁,花后70 d时硬核开始出现;花后70 d后,果实大小和质量增长变慢,果壳开始形成并逐渐硬化变厚;花后90~120 d时,坚果质量、果壳厚度、核仁质量及出仁率等指标均快速增加;花后120~140 d时,坚果大小增长速度变慢,坚果质量开始下降。方差分析结果表明,除坚果三径外,其他指标在不同处理间差异显著(P<0.05)。其中以7月初—8月初喷施叶面肥处理下核桃坚果经济指标值最高且与对照差异极显著(P<0.01);其次是5月底—6月底喷施叶面肥,与对照差异显著(P<0.05);疏果处理下核桃坚果经济指标与对照差异不显著(P>0.05)。【结论】‘陇核5号’果实生长发育总体为缓慢、快速、缓慢的趋势,呈单“S”形曲线。疏果、施肥均能改善核桃坚果的经济性状。

云南不同品种核桃果实品质分析与综合评价

为了探究云南主栽核桃和薄壳山核桃果实的品质评价指标,选取27个核桃品种果实,对矿质元素、蛋白脂、粗脂肪等12个营养指标进行变异和相关性分析,并采用主成分和聚类分析方法,进行分类与综合评价。结果表明:12个营养指标的含量变异较为丰富,变异系数的变化范围为5%~83%,其中VC变异系数最大,粗脂肪变异系数最小;9种矿质元素平均含量从高到低依次为:K>P>Mg>Ca>Mn>Na>Fe>Zn>Cu,蛋白质含量均值为15.62%,脂肪含量均值为68.63%,VC的平均含量为4.66 mg/100 g;相关性分析表明,12个营养指标之间,P、Fe、Mg、Ca、Cu均与蛋白质呈极显著(P<0.01)正相关;主成分分析进行综合评价筛选出品质最佳的核桃品种为‘香茶’‘永平’‘晚熟’和‘小圆果’,薄壳山核桃中品种‘卡多’综合表现较好;聚类分析结果显示,可将其分为两大类,即富含矿质元素类群和高脂肪含量类群;相关性分析和主成分分析结果显示,K、Fe、Mg、Ca、Cu元素、蛋白质、脂肪为评价云南不同品种核桃品质的关键性指标。薄壳山核桃适合榨油,22种主栽核桃适合直接食用或开发富矿质元素和高蛋白的功能饮料。研究明确了云南核桃品质评价的关键指标并探明品质特性,提供科学分类方法,为云南核桃品质评价体系的构建奠定理论依据。

核桃振动采收研究现状与发展趋势

核桃作为一种高附加值的经济作物,具有广泛的市场需求和良好的经济效益。随着我国核桃种植面积的不断扩大和农业机械化的发展,核桃采收存在的采收率低下、采净率不高的问题日渐凸显,研制适合我国不同种植模式需求的核桃高效采收装备对于促进核桃生产规模化、推进农业科技创新具有重要意义。针对国内外核桃采收技术与装备的发展,综述了对于立地条件复杂的山核桃、小行距矮化密植种植模式下的核桃以及标准果园种植模式下的核桃适用的机械采收设备的研究现状,从树枝振动、树干振动和树冠振动3个角度对其振动机理进行了分析论证,并就国内外振动采收的激振夹持方式与激振参数进行了分析。分析了当前振动采收技术在实际应用过程中存在的主要问题,并指出了结构复杂、工作参数难确定、智能化程度不高是制约我国核桃采收机械发展的因素。提出了未来核桃振动采收智能化、多样化的发展趋势,通过在激振机理、能量传递、精准定位、柔性作业等方面开展深入研究,可为振动采收技术与装备的发展提供一种新思路。

核桃机械化收获装置研究现状与展望

核桃是我国重要的经济作物,其收获具有采收时间短、收获环境复杂等特点。随着近年来我国核桃产量的快速增长,现有的收获技术制约着核桃产业的发展,核桃机械化收获存在的问题逐渐凸显,核桃机械化收获体系亟需完善。国内外现有的核桃机械收获装置可分为分段式与采收一体式,通过总结核桃机械化收获装置的结构、特点以及工作原理,指明现阶段核桃机械化收获装置存在自动化水平不足、装置集成化程度低、地形适应能力不足、作业效果差等问题,并对核桃机械化收获装置未来的发展提出建议,为核桃机械化收获装置的改进与创新提供方向与思路。未来核桃收获机械的发展应全面面向自动化、智能化、集成化、拥有更强的适应性与可靠性,以满足不断发展的核桃产业的需求。

不同施肥处理对‘渝城1号’核桃产量、品质和土壤肥力的影响

以‘渝城1号’核桃为研究对象,设置单施复合肥、单施有机肥、施用核桃配方肥及不施肥4个处理,测定不同施肥处理时核桃产量、品质及核桃园土壤理化性质、微生物数量等,对核桃配方肥的应用效果进行评价。结果表明:施复合肥、有机肥及核桃配方肥均能提高核桃产量,其中,施用核桃配方肥的增产效果最好,经济效益最高,该施肥处理比不施肥的收益提高88.1%。相比于不施肥,施用核桃配方肥时核桃果实的蛋白质及脂肪总量显著提高,油酸、亚油酸、α-亚麻酸等不饱和脂肪酸占比增加,硬脂酸、棕榈酸等饱和脂肪酸占比下降。施用复合肥能促进核桃园土壤有效氮、磷、钾质量分数的增加,但会引起土壤pH及有机质质量分数下降。施用有机肥和核桃配方肥均能促进土壤有机质和有效养分质量分数增加。施用核桃配方肥后,土壤总微生物量增加,固氮菌、解磷菌、解钾菌、纤维降解菌等功能微生物数量均显著增多,土壤脲酶、磷酸酶、蔗糖酶、过氧化氢酶等活性大幅升高。施用核桃配方肥能显著提升核桃的产量和品质,更利于土壤养分转化和果园可持续经营。

基于EDEM的核桃壳仁混合物振动筛分级工艺优化

为提高核桃壳仁混合物的分级效果,对现有核桃壳仁混合物分级设备进行三维实体建模,利用EDEM软件模拟核桃壳仁混合物的分级过程,以筛面上物料的运动速度、质量以及各等级颗粒在统计区域的数量为指标,以振幅、振动频率、振动方向角、筛面倾角为考察因素,对振动筛分级工艺进行优化。结果表明:在振动频率12 Hz、振幅5 mm、振动方向角45°、筛面倾角4°的工艺参数组合下,各等级核桃壳仁的透筛率最高,分级效果最好。

核桃根际耐旱促生菌的分离筛选及其促生作用研究

为获得高效促生的核桃根际菌株,研制微生物菌肥,改善土壤肥力,促进植株生长发育,提升核桃品质奠定理论基础。以核桃根际土壤为材料,分离筛选具有固N、溶P、解K、分泌生长素和产胞外多糖能力的菌株,通过16S rDNA测序鉴定菌属。按照功能叠加增效、功能互补的原则,人工构建合成菌群,采用盆栽试验验证菌群对核桃幼苗的促生效果。结果表明,共筛选出9株耐旱促生菌株,其中5株具有溶P能力,溶P量为2.28~61.63μg·mL^(-1),4株具有分泌IAA能力,分泌IAA量为2.32~9.44μg·mL^(-1),4株具有产胞外多糖的能力,产胞外多糖量为37.69~112.84μg·mL^(-1)。经鉴定分别属于节杆菌属、肠杆菌属、剑菌属、中华根瘤菌属、假单胞菌属和鞘氨醇杆菌属。盆栽试验表明,4种菌群均能显著促进核桃幼苗的生长,株高、生物量和净光合速率,与对照相比,分别增加了32.3%~64.2%、37.6%~52.6%和47.4%~68.5%。此外,复合菌群的施用还显著提高了土壤β-葡萄糖苷酶(BG)、β-N-乙酰葡糖胺糖苷酶(NAG)和碱性磷酸酶(AP)活性,增加了速效P、硝态N及铵态N含量(P<0.05),其中以复合菌群T4效果最佳。研究结果可为研制适合干旱半干旱区的微生物肥料提供菌种资源。

基于HER-TD3算法的青皮核桃采摘机械臂路径规划

针对青皮核桃和树枝等障碍物无序生长导致机械臂采摘环境复杂、训练任务量大、稳定性差等普遍存在的问题,本文设计了一种同步带模组与机械臂协作的采摘装置,并采用基于事后经验回放的双延迟深度确定性策略梯度算法(Twin delayed deep deterministic policy gradient with hindsight experience replay,HER-TD3)对采摘机械臂进行路径规划,通过HER算法提高智能体的探索能力,缓解稀疏奖励的问题;通过TD3算法提高智能体的稳定性,减少了训练中出现的震荡现象。为了证明HER-TD3算法的可行性和泛化能力,引入TD3、HER-DDPG算法进行对比,采用降维训练方法对3种深度强化学习智能体进行训练,结果表明HER-TD3算法模型在完成路径规划任务中成功率达到98%,与HER-DDPG算法相比提高4个百分点,与TD3算法相比提高19个百分点;在CoppeliaSim软件中搭建三维模型仿真环境,设计初始姿态和碰撞检测,使用YOLO v4识别青皮核桃,通过该算法模型能够引导虚拟采摘机械臂避开树枝障碍物达到目标位置,完成无碰撞路径规划,无障碍物和有障碍物时路径规划成功率分别为91%和86%;利用物理样机进行青皮核桃采摘试验时,仍能较好地完成路径规划任务,无障碍物时采摘路径规划成功率为86.7%,平均运动时间为12.8 s,有障碍物时采摘路径规划成功率为80.0%,平均运动时间为13.6 s,验证了HER-TD3算法对复杂环境具有较好的适应性和稳定性。

漾濞核桃物理特性测定及分析

为完善核桃精深加工设备,提高自动化生产效率,对云南漾濞核桃的三径尺寸、含水率、摩擦因数、质心及弹性模量基本物理参数进行测定,并对不同含水率的核桃进行准静态压缩试验,得到漾濞核桃的相关物理特性及与之相关的力学特性的数值。结果表明:漾濞核桃整体呈短圆;湿核桃的含水率在22.05%~31.32%,同时核桃的破壳力随着含水率的减小而减小;核桃以缝合线与平板接触的姿态在PVC人字纹面上的摩擦系数最大为0.53,在不锈钢面上的摩擦系数最小为0.38;三点测力法测出核桃的质心偏向于尖端方向;湿核桃的弹性模量大致在122.03~133.78 MPa,弹性模量随着含水率的降低呈先减后增的趋势。

不同有机肥对土壤及核桃果实品质的影响

为探究“辽宁1号”核桃较适宜的有机肥,在河北省隆尧县红沙峪生态农业科技有限公司核桃园以10年生“辽宁1号”核桃树为试验材料,利用半焦肥、鸡粪及生物菌肥3种有机肥进行施肥处理,检测不同有机肥对土壤性状、核桃产量和品质的影响。结果表明,生物菌肥(2.5 kg/株)能显著提高种仁黄酮含量;鸡粪(40 kg/株)能显著提高种仁Fe、Zn含量以及土壤速效磷、速效钾含量;5.0 kg/株半焦肥能显著提高种仁多酚、土壤有机质含量;10.0 kg/株半焦肥施肥能显著提高青果的横径,坚果的单果质量、纵径、横径、侧径,种仁的脂肪、K、Ca、Mn、Cu含量以及土壤全磷含量。10.0 kg/株半焦肥在相关果实品质方面的综合效果最好,而5.0 kg/株半焦肥的经济效益最高。

高接换种对核桃枝条和根系生理特征的影响

为探究高接换种对核桃枝条和根系生理特征的影响,对定植10年的实生砧+‘香玲’进行高接换种‘清香’,以短截更新为对照,成活3年后比较分析1年生枝和根系生理特征差异。结果表明:(1)高接后1年生枝导管密度为76.82 N/mm^(2),平均长度为39.85 cm,叶片N、K元素含量分别为27.20、7.17 g/kg,显著高于更新处理(P<0.05),说明高接提高了养分运输和树冠恢复效率。(2)更新处理20~40 cm土层根系导管直径为86.55μm,0~20 cm土层根系导管平均密度为149.33 N/mm^(2),显著高于高接处理(P<0.05),说明高接‘清香’一定程度上改变了根系结构。(3)高接后0~20 cm土层根系韧皮部厚度/枝条半径比例为0.39,其根系平均长度、直径、周皮厚度分别达到10.64 cm、2.36 mm和70.09μm,显著高于更新处理(P<0.05),说明高接‘清香’后,光合产物倾向于分配到0~20 cm土层根系。(4)高接‘清香’核桃后,1年生枝和20~40 cm土层根系形成层厚度分别达到36.26、76.42μm,显著高于更新处理(P<0.05),说明其具有较强的增粗生长潜力。综上,高接‘清香’核桃改变了‘香玲’核桃1年生枝和根系输导结构,提高了养分运输效率,促进了树冠和地表根系的生长。

我国不同产地红仁核桃及其油脂营养成分的比较分析

为了促进红仁核桃的进一步开发利用及深加工产品研发,以我国山西、陕西、甘肃等7个产地的红仁核桃为原料,对其种仁的基本营养成分、矿质元素、V_(E),种皮酚类物质,及红仁核桃油的脂肪酸、甾醇、角鲨烯进行了测定与分析。结果表明:7个产地红仁核桃仁均含有大量的粗脂肪、粗蛋白质及总糖,含量分别为60.77~73.89、14.84~17.21、8.72~14.29 g/100 g;检测的8种矿质元素(K、Na、Ca、Mg、Fe、Cu、Zn、Se)中,含量最高的常量元素K和微量元素Fe均以山西省平顺县的红仁核桃仁最高;红仁核桃仁中平均总V_(E)含量为394.81 mg/kg,且均以γ-生育酚+β-生育三烯酚为主;陕西省商洛市八一基地的红仁核桃种皮中总酚含量最高,为462.23 mg/g;陕西省商洛市石门基地的红仁核桃种皮中总黄酮含量最高,为330.89 mg/g;山西省平顺县红仁核桃种皮中花色苷含量最高,为0.65 mg/g;7个产地的红仁核桃油共检出10种脂肪酸,以亚油酸、油酸、α-亚麻酸为主,其中云南省大理州、山西省平顺县的红仁核桃油中亚油酸含量较高;7个产地的红仁核桃油中平均总甾醇含量为231.94 mg/100 g,且均以谷甾醇为主,其中陕西省商洛市石门基地的红仁核桃油中谷甾醇含量最高,占比为72.08%;7个产地的红仁核桃油中平均角鲨烯含量为23.45 mg/kg,其中甘肃省成县红仁核桃油的角鲨烯含量最高,为37.34 mg/kg。综上,不同产地的红仁核桃及其油脂的营养成分含量具有一定的差异,但总体营养成分组成相同,其油脂中脂质伴随物的种类及含量较为丰富,具有较高的开发利用价值。