Microbial community structure and diversity in deep-sea hydrothermal vent sediments along the Eastern Lau Spreading Centre

The aim of this study is to investigate microbial structures and diversities in five active hydrothermal fields＇ sediments along the Eastern Lau Spreading Centre （ELSC） in the Lau Basin （southwest Pacific）. Microbial communities were surveyed by denatured gradient gel electrophoresis （DGGE） and clone library analysis of 16S rRNA genes. The differences in microbial community structures among sediment samples from the five deep-sea hydrothermal sites were revealed by DGGE profiles. Cluster analysis of DGGE profiles sepa- rated the five hydrothermal samples into two groups. Four different 16S rRNA gene clone libraries, repre- senting two selected hydrothermal samples （19-4TVG8 and 19-4TVG11）, were constructed. Twenty-three and 32 phylotypes were identified from 166 and 160 bacterial clones respectively, including Proteobacteria, Bacteroidetes, Firmicutes, Nitrospirae and Planctomycetes. The phylum Proteobacteria is dominant in both bacterial libraries with a predominance of Gamma-Proteobacteria. A total of 31 and 25 phylotypes were obtained from 160 and 130 archaeal clones respectively, including Miscellaneous Crenarchaeotic Group, Marine Group Ⅰ and Ⅲ, Marine Benthic Group E, Terrestrial Hot Spring Crenarchaeota and Deep-sea Hy- drothermal Vent Euryarchaeota. These results show a variety of clones related to those involved in sulfur cycling, suggesting that the cycling and utilization of sulfur compounds may extensively occur in the Lau Basin deep-sea hydrothermal ecosystem.

A Lagrangian Particle Random Walk Model for Simulating A Deep-Sea Hydrothermal Plume with both Buoyant and Non-Buoyant Features

This paper presents a computational model of simulating a deep-sea hydrothermal plume based on a Lagrangian particle random walk algorithm. This model achieves the efficient process to calculate a numerical plume developed in a fluid-advected environment with the characteristics such as significant filament intermittency and significant plume meander due to flow variation with both time and location. Especially, this model addresses both non-buoyant and buoyant features of a deep-sea hydrothermal plume in three dimensions, which significantly challenge a strategy for tracing the deep-sea hydrothermal plume and localizing its source. This paper also systematically discusses stochastic initial and boundary conditions that are critical to generate a proper numerical plume. The developed model is a powerful tool to evaluate and optimize strategies for the tracking of a deep-sea hydrothermal plume via an autonomous underwater vehicle （AUV）.

Characterization of DNA polymerase δ from deep-sea hydrothermal vent shrimp Rimicaris exoculata

DNA polymerase δ(Polδ)plays a crucial and versatile role in DNA replication and DNA repair processes.Vent shrimp Rimicaris exoculata is the primary megafaunal community living in hydrothermal vents.In this study,the Polδfrom shrimp Rimicaris exoculata was cloned,expressed and characterized.The results showed that the Polδcatalytic subunit(POLD1),852 amino acids in length,shared high homology with crayfish Procambarus clarkii and shrimp Oratosquilla oratoria.The recombinant POLD1 expressed in Escherichia coli showed that the enzyme was active in a range of 20℃ to 40℃ with an optimum temperature at 25℃ and in a wide range of p H with an optimum at pH 6.0.The activities of POLD1 were significantly enhanced in the presence of Triton-X 100,Tween 20 and Mn^(2+).The K_(m)(dNTP)value of POLD1 was 4.7μmol/L.The present study would be helpful to reveal the characterization of Polδof deep-sea vent animals.

Microbial community structure and nitrogenase gene diversity of sediment from a deep-sea hydrothermal vent field on the Southwest Indian Ridge

A sediment sample was collected from a deep-sea hydrothermal vent field located at a depth of 2 951 m on the Southwest Indian Ridge. Phylogenetic analyses were performed on the prokaryotic community using polymerase chain reaction（PCR） amplification of the 16 S rRNA and nifH genes. Within the Archaea, the dominant clones were from marine benthic group E（MBGE） and marine group I（MGI） belonging to the phyla Euryarchaeota and Thaumarchaeota, respectively. More than half of the bacterial clones belonged to the Proteobacteria, and most fell within the Gammaproteobacteria. No epsilonproteobacterial sequence was observed. Additional phyla were detected including the Actinobacteria, Bacteroidetes, Planctomycetes, Acidobacteria, Nitrospirae, Chloroflexi, Chlorobi, Chlamydiae, Verrucomicrobia, and candidate divisions OD1, OP11, WS3 and TM6, confirming their existence in hydrothermal vent environments. The detection of nifH gene suggests that biological nitrogen fixation may occur in the hydrothermal vent field of the Southwest Indian Ridge. Phylogenetic analysis indicated that only Clusters I and III NifH were present. This is consistent with the phylogenetic analysis of the microbial 16 S rRNA genes, indicating that Bacteria play the main role in nitrogen fixation in this hydrothermal vent environment.

Key genes expression of reductive tricarboxylic acid cycle from deep-sea hydrothermal chemolithoautotrophic Caminibacter profundus in response to salinity, pH and O_2

CO2 fixation pathway of Caminibacter profundus, a chemolithoautotrophic e-Proteobacteria from deep-sea hydrothermal vent, was determined and characterized by genetic and enzymatic analyses. Gene expression of key enzymes for CO2 fixation in response to salinity, pH and O2 in Medium 829 were also investigated. The results demonstrate that C. profundus contained aclB, porA and oorA, the genes encoding key enzymes of reductive tricarboxylic acid （rTCA） cycle. However, genes fragments of cbbL and cbbMencoding key enzyme of Calvin cycle were not recovered. Key enzymatic activities of ATP citrate lyase （ACL）, pyruvate： ferredoxin oxidoreductase （POR） and 2-oxoglutarate： ferredoxin oxidoreductase （OOR） were also present in C. profun- dus. The combination of genetic and enzymatic analyses confirm that C. profundus adopted rTCA cycle for carbon assimilation. The results of aclB and oorA relative expressions of C. profundus demonstrate that the ranges of environmental factors for high genes expression were sea salt 3.0%-5.0% （optimum 3.0%）, pH 5.0-6.5（optimum pH 6.5）, anaerobic to microaerobic conditions （optimum 1.0% 02）. Gene expression pat- terns under different conditions show similar patterns with bacterial growth, revealing that key rTCA cycle genes provided molecular basis for bacterial growth and propagation. Our results suggest that C. profun- dus could regulate key genes of rTCA cycle for carbon assimilation and energy metabolism in response to environmental fluctuations in hydrothermal vent.

Episodic hydrothermal alteration on Middle Permian carbonate reservoirs and its geological significance in southwestern Sichuan Basin,SW China

To analyze the episodic alteration of Middle Permian carbonate reservoirs by complex hydrothermal fluid in southwestern Sichuan Basin,petrology,geochemistry,fluid inclusion and U-Pb dating researches are conducted.The fractures and vugs of Middle Permian Qixia–Maokou formations are filled with multi-stage medium-coarse saddle dolomites and associated hydrothermal minerals,which indicates that the early limestone/dolomite episodic alteration was caused by the large-scale,high-temperature,deep magnesium-rich brine along flowing channels such as basement faults or associated fractures under the tectonic compression and napping during the Indosinian.The time of magnesium-rich hydrothermal activity was from the Middle Triassic to the Late Triassic.The siliceous and calcite fillings were triggered by hydrothermal alteration in the Middle and Late Yanshanian Movement and Himalayan Movement.Hydrothermal dolomitization is controlled by fault,hydrothermal property,flowing channel and surrounding rock lithology,which occur as equilibrium effect of porosity and permeability.The thick massive grainstone/dolomites were mainly altered by modification such as hydrothermal dolomitization/recrystallization,brecciation and fracture-vugs filling.Early thin-medium packstones were mainly altered by dissolution and infilling of fracturing,bedding dolomitization,dissolution and associated mineral fillings.The dissolved vugs and fractures are the main reservoir space under hydrothermal conditions,and the connection of dissolved vugs and network fractures is favorable for forming high-quality dolomite reservoir.Hydrothermal dolomite reservoirs are developed within a range of 1 km near faults,with a thickness of 30–60 m.Hydrothermal dolomite reservoirs with local connected pore/vugs and fractures have exploration potential.

Hydrothermal hydrogenation/deoxygenation of palmitic acid to alkanes over Ni/activated carbon catalyst

To produce paraffin from hydrogenation/deoxygenation of palmitic acid,model compound of bio-oil obtained by hydrothermal liquefaction(HTL)of microalgae has been an attractive focus in recent years.In order to avoid energy-intensive separation process of water and bio-oil,it is of importance that deoxygenation upgrading of fatty acids under hydrothermal conditions similar to HTL process.Herein,it is the first time to explore the application of activated carbon(AC)-supported non-noble-metal catalysts,such as Ni,Co,and Mo,and so on,in the hydrothermal hydrogenation/deoxygenation of long-chain fatty acids,and the obtained Ni/AC-H(the Ni/AC was further H_(2)pre-reduced)is one of the best catalysts.In addition,it is found that the catalytic activity can be further improved by H_(2)pre-reduction of catalyst.Characterization results that are more low valences of nickel and oxygen vacancy can be obtained after H_(2)pre-reduction,thus significant promoting the deoxygenation especially the decarbonylation pathway of fatty acids.The total alkanes yield can reaches 95.9%at optimal conditions(280℃,360 min).This work confirmed that the low-priced AC-supported non-noble-metal catalysts have great potential compared with the noble-metal catalyst,in hydrothermal upgrading of bio-oil.

Hydrothermal treatment of pearl millet grains:Effects on nutritional composition,antinutrients and flour properties

Pearl millet(Pennisetum glaucum)is one of the major millets with high nutritional properties.This crop exhibits exceptional resilience to drought and high temperatures.However,the processing of pearl millet poses a significant challenge due to its high lipid content,enzyme activity,and presence of antinutrients.Consequently,it becomes imperative to enhance the quality and prolong the shelf life of pearl millet flour by employing suitable technologies.Hydrothermal treatment in the food industry has long been seen as promising due to its potential to reduce microbial load,inactivate enzymes,and improve nutrient retention.This study aims to investigate the effects of hydrothermal treatment on the quality characteristics of pearl millet.The independent variables of the study were soaking temperature(35,45,55℃),soaking time(2,3,4 h),and steaming time(5,10,15 min).Treatment conditions had a statistically significant effect on nutrient retention.Major antinutrients like tannins and phytates were reduced by 0.99% to 5.94% and 0.36% to 6.00%,respectively,after the treatment.Lipase activity decreased significantly up to 10% with the treatment conditions.The findings of this study could potentially encourage the use of pearl millet flour in the production of various food items and promote the application of hydrothermal treatment in the field of food processing.

Cross-upgrading of biomass hydrothermal carbonization and pyrolysis for high quality blast furnace injection fuel production:Physicochemical characteristics and gasification kinetics analysis

The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile content of biochar ranged from 16.19%to 45.35%,and the alkali metal content,ash content,and specific surface area were significantly reduced.The optimal route for biochar pro-duction is hydrothermal carbonization-pyrolysis(P-HC),resulting in biochar with a higher calorific value,C=C structure,and increased graphitization degree.The apparent activation energy(E)of the sample ranges from 199.1 to 324.8 kJ/mol,with P-HC having an E of 277.8 kJ/mol,lower than that of raw biomass,primary biochar,and anthracite.This makes P-HC more suitable for blast furnace injection fuel.Additionally,the paper proposes a path for P-HC injection in blast furnaces and calculates potential environmental benefits.P-HC of-fers the highest potential for carbon emission reduction,capable of reducing emissions by 96.04 kg/t when replacing 40wt%coal injec-tion.

Towards a new avenue for rapid synthesis of electrocatalytic electrodes via laser-induced hydrothermal reaction for water splitting

Electrochemical production of hydrogen from water requires the development ofelectrocatalysts that are active,stable,and low-cost for water splitting.To address these challenges,researchers are increasingly exploring binder-free electrocatalytic integratedelectrodes (IEs) as an alternative to conventional powder-based electrode preparation methods,for the former is highly desirable to improve the catalytic activity and long-term stability for large-scale applications of electrocatalysts.Herein,we demonstrate a laser-inducedhydrothermal reaction (LIHR) technique to grow NiMoO4nanosheets on nickel foam,which is then calcined under H2/Ar mixed gases to prepare the IE IE-NiMo-LR.This electrode exhibits superior hydrogen evolution reaction performance,requiring overpotentials of 59,116 and143 mV to achieve current densities of 100,500 and 1000 mA·cm-2.During the 350 h chronopotentiometry test at current densities of 100 and 500 m A·cm-2,the overpotentialremains essentially unchanged.In addition,NiFe-layered double hydroxide grown on Ni foam is also fabricated with the same LIHR method and coupled with IE-NiMo-IR to achieve water splitting.This combination exhibits excellent durability under industrial current density.The energy consumption and production efficiency of the LIHR method are systematicallycompared with the conventional hydrothermal method.The LIHR method significantly improves the production rate by over 19 times,while consuming only 27.78%of the total energy required by conventional hydrothermal methods to achieve the same production.

A Comparison of Hydrothermal Aging, SO2 and Propene Poisoning Effects on NH3-SCR over Cu-ZSM-5 and Cu-SAPO-34 Catalysts

This study was aimed to investigate the effects of hydrothermal aging, propene and SO2 poisoning on the ammonia-selective catalytic reduction (NH3-SCR) performance of both Cu-SAPO-34 and Cu-ZSM-5. The catalytic activities of fresh, aged and poisoned samples were tested in ammonia-selective catalytic reduction (NH3-SCR) of NOx conditions. The XRD, TG and N2-desorption results showed that the structures of the Cu-SAPO-34 and Cu-ZSM-5 remained intact after 750˚C hydrothermally aged, SO2 and propene poisoned. After hydrothermal aging at 750˚C for 12 h, the NO reduction performance of Cu-ZSM-5 was significantly reduced at lower temperatures, while that of Cu-SAPO-34 was less affected. Moreover, Cu-SAPO-34 catalyst showed high NO conversion with SO2 or propene compared to Cu-ZSM-5. However, Cu-ZSM-5 showed a larger drop in catalytic activity with SO2 or propene compared to Cu-SAPO-34 catalyst. The H2-TPR results showed that Cu2 ions could be reduced to Cu and Cu0 for Cu-ZSM-5, while no significant transformation of copper species was observed for Cu-SAPO-34. Meanwhile, the UV-vis DRS results showed that CuO species were formed in Cu-ZSM-5, while little changes were observed for the Cu-SAPO-34. Cu-SAPO-34 showed high sulfur and hydrocarbon poison resistance compared to Cu-ZSM-5. In summary, Cu-SAPO-34 with small-pore zeolite showed higher hydrothermal stability and better hydrocarbon and sulfur poison resistant than Cu-ZSM-5 with medium-pore.

Microorganisms from deep-sea hydrothermal vents

With a rich variety of chemical energy sources and steep physical and chemical gradients,hydrothermal vent systems offer a range of habitats to support microbial life.Cultivation-dependent and independent studies have led to an emerging view that diverse microorganisms in deep-sea hydrothermal vents live their chemolithoautotrophic,heterotrophic,or mixotrophic life with versatile metabolic strategies.Biogeochemical processes are mediated by microorganisms,and notably,processes involving or coupling the carbon,sulfur,hydrogen,nitrogen,and metal cycles in these unique ecosystems.Here,we review the taxonomic and physiological diversity of microbial prokaryotic life from cosmopolitan to endemic taxa and emphasize their significant roles in the biogeochemical processes in deep-sea hydrothermal vents.According to the physiology of the targeted taxa and their needs inferred from meta-omics data,the media for selective cultivation can be designed with a wide range of physicochemical conditions such as temperature,pH,hydrostatic pressure,electron donors and acceptors,carbon sources,nitrogen sources,and growth factors.The application of novel cultivation techniques with real-time monitoring of microbial diversity and metabolic substrates and products are also recommended.

Breaking the temperature limit of hydrothermal carbonization of lignocellulosic biomass by decoupling temperature and pressure

Hydrothermal carbonization(HTC) of lignocellulosic biomass is a promising technology for the production of carbon materials with negative carbon emissions. However, the high reaction temperature and energy consumption have limited the development of HTC technology. In conventional batch reactors, the temperature and pressure are typically coupled at saturated states. In this study, a decoupled temperature and pressure hydrothermal(DTPH) reaction system was developed to decrease the temperature of the HTC reaction of lignocellulosic biomass(rice straw and poplar leaves). The properties of hydrochars were analyzed by scanning electron microscopy(SEM), Fourier transform infrared(FTIR) spectroscopy, X-ray photoelectron spectroscopy(XPS), Raman spectroscopy, X-ray diffraction(XRD), thermogravimetric analyzer(TGA), etc. to propose the reaction mechanism. The results showed that the HTC reaction of lignocellulosic biomass could be realized at a low temperature of 200℃ in the DTPH process, breaking the temperature limit(230℃) in the conventional process. The DTPH method could break the barrier of the crystalline structure of cellulose in the lignocellulosic biomass with high cellulose content, realizing the carbonization of cellulose and hemicellulose with the dehydration, unsaturated bond formation, and aromatization. The produced hydrochar had an appearance of carbon microspheres, with high calorific values, abundant oxygen-containing functional groups, a certain degree of graphitization, and good thermal stability. Cellulose acts not only as a barrier to protect itself and hemicellulose from decomposition, but also as a key precursor for the formation of carbon microspheres. This study shows a promising method for synthesizing carbon materials from lignocellulosic biomass with a carbon-negative effect.

Hydrothermal Systems Characterized by Crustal Thermally-dominated Structures of Southeastern China

Southeastern China(SE China)is located in the Pacific tectonic domain and has experienced a series of tectono-magmatic events induced by the subduction of the Paleo-Pacific Plate since the late Mesozoic.The subduction formed a series of NE-NNE oriented faults under a NW-SE regional stress field,along which a number of thermal springs occur.Previous studies have focused on the genesis mechanism of specific geothermal fields in SE China,but the general characteristics of hydrothermal systems in SE China remains unclear.In this study,we investigate the correlation between geothermal activity,hydrochemical type and regional faults by studying the distribution of hydrothermal activity and geochemical properties of typical hydrothermal systems in SE China.The hydrothermal systems in SE China have a crustal thermally-dominated structural origin unique to the specific geological and tectonic conditions of the Eurasian Plate margin.The upwelling of the asthenosphere and the widespread granitoids with high radiogenic heat production in SE China provide major heat sources for regional geothermal anomalies.The NE-oriented crustal thermally-dominated faults are critical for the formation of geothermal anomalies and NW-oriented extensional faults have created favorable conditions for meteoric water infiltration,transportation and the formation of thermal springs.

Developing super-hydrophobic and corrosion-resistant coating on magnesium-lithium alloy via one-step hydrothermal processing

Formation of super-hydrophobic and corrosion-resistant coatings can provide significant corrosion protection to magnesium alloys.However,it remains a grand challenge to produce such coatings for magnesium-lithium alloys due to their high chemical reactivity.Herein,a one-step hydrothermal processing was developed using a stearic-acid-based precursor medium,which enables the hydrothermal conversion and the formation of low surface energy materials concurrently to produce the super-hydrophobic and corrosion-resistant coating.The multiscale microstructures with nanoscale stacks and microscale spheres on the surface,as well as the through-thickness stearates,lead to the super-hydrophobicity and excellent corrosion resistance of the obtained coating.

High-precision double-spike Cd isotopic measurements of seawater by MC-ICP-MS and its application to seawater affected by hydrothermal vent fluids

Cadmium(Cd)isotopes in seawater have been proven as an important geochemical tool for tracing ocean Cd circulation in the modern ocean.In this study,we evaluated a new method to separate Cd(*60 ng)from seawater using Chelex resin(1.0 g)coupled with AG-MP-1M resin.The results show that the Chelex resin is suffi-cient to remove Cd from Na and Mg matrix with Cd recoveries at 98.3±3.5%(2SD,N=6);while AG-MP-1M resin could separate Cd from the residual Na,Mg,and isobaric inferences.The total Cd recoveries of the method are 96.3±1.5%(2SD;N=4)and the salinity of the samples has no significant impacts on Cd recovery.Cd isotope ratios were measured using a Nu PlasmaⅢMC-ICP-MS and^(111)Cd–^(110)Cd double spike technique.By comparing theδ^(114/110)Cd values(0.00±0.06%)of synthetic seawaters doped with Cd isotope standard(NIST-3108;treated by Chelex+AG-MP-1M resin)and the reference value(-0.00%),no variations were observed.We also analyzed the Cd isotope compositions of three deep seawaters from a column at the Southwest Indian Ocean Ridges(SWIR).Theδ^(114/110)Cd values of the col-umn are decreased from 1.05±0.05%at 3200 m to 0.36±0.05%at 2800 m,differing from reportedδ^(114/110)Cd values of deep seawater in other oceans.Considering the spatial distance between the column and active hydrothermal vents in SWIR(-13 km),we propose that such positiveδ^(114/110)Cd values of deep seawater were likely contaminated by vent fluids,which could provide heavy Cd isotope to deep seawaters.This study demon-strates that Cd isotope is more sufficient to distinguish the impact of plumes on deep seawater.

Hydrochar Pelletization towards Solid Biofuel from Biowaste Hydrothermal Carbonization

Hydrothermal carbonization is highly applicable to high moisture biomass upgrading due to the fact that moist-ure involved can be directly used as reaction media under the subcritical-water region.With this,value-added utilization of hydrochar as solid fuel with high carbon and energy density is one of the important pathways for biomass conversion.In this review,the dewatering properties of hydrochar after the hydrothermal carbonization of biowaste,coalification degree with elemental composition and evolution,pelletization of hydrochar to enhance the mechanical properties and density,coupled with the combustion properties of hydrochar biofuel were discussed with various biomass and carbonization parameters.Potential applications for the co-combustion with coal,cleaner properties and energy balance for biowaste hydrothermal carbonization were presented as well as the challenges.

Effect of solvents on the morphology and structure of barium titanate synthesized by a one-step hydrothermal method

Tetragonal barium titanate was synthesized from barium hydroxide octahydrate and titanium tetrachloride through a simple one-step hydrothermal method.The effect of different solvents on the crystal structure and morphology of barium titanate nanoparticles during the hy-drothermal process was investigated.Except for ethylene glycol/water solvent,impurity-free barium titanate was synthesized in pure water,methanol/water,ethanol/water,and isopropyl alcohol/water mixed solvents.Compared with other alcohols,ethanol promotes the formation of a tetragonal structure.In addition,characterization studies confirm that particles synthesized in methanol/water,ethanol/water,and isopropyl al-cohol/water mixed solvents are smaller in size than those synthesized in pure water.In the case of alcohol-containing solvents,the particle size decreases in the order of isopropanol,ethanol,and methanol.Among all the media used in this study,ethanol/water is considered the optimum reaction media for barium titanate with high tetragonality(defined as the ratio of two lattice parameters c and a,c/a=1.0088)and small aver-age particle size(82 nm),which indicates its great application potential in multilayer ceramic capacitors.

Mineralogy and geochemistry of hydrothermal sulphide from a submarine volcanic high at 18°36.4'S Central Lau Spreading Center, Southwest Pacific

We report the mineralogy and geochemistry of hydrothermal sulphide from the crater of a volcanic high near 18°36.4′S of the Central Lau Spreading Center.During 1990s,that volcanic structure was reported active and sulphide samples were collected by MIR submersible.A section of a chimney-like structure from the crater-floor was studied here.The Fe-depleted sphalerites,and Co-depleted pyrites in that chimney were similar to those commonly found in low to moderate temperature(<300℃)sulphides from sediment-starved hydrothermal systems.Bulk analyses of three parts of that chimney section showed substantial enrichment of Zn(18%–20%)and Fe(14%–27%)but depletion of Cu(0.8%–1.3%).In chondrite-normalized rare earth element-patterns,the significant negative Ce-anomalies(Ce/Ce*=0.27–0.39)and weakly positive Eu-anomalies(Eu/Eu*=1.60–1.68)suggested sulphide mineralisation took place from reduced low-temperature fluid.The depleted concentration of lithophiles in this sulphide indicates restricted contribution of sub-ducting plate in genesis of source fluid as compared to those from other parts of Lau Spreading Centre.Uniform mineralogy and bulk composition of subsamples across the chimney section suggests barely any alteration of fluid composition and/or mode of mineralisation occurred during its growth.

One-step hydrothermal synthesis of 2,5-PDCA-containing MgAl-LDHs three-layer composite coating with high corrosion resistance on AZ31

The addition of 2,5-pyridinedicarboxylic acid(2,5-PDCA)to the Mg-Al LDH coating,which was prepared by one-step hydrothermal synthesis,had extremely enhanced the corrosion protection of AZ31 Mg alloy,although the 2,5-PDCA could not be intercalated into the interlayer spacing.The corrosion current density of 0.05 mol L^(−1)2,5-PDCA LDH containing LDH coating is 3.18 nA cm^(−2),reduced by two orders of magnitude compared to the LDH coating without inhibitor,and the corrosion inhibition efficiency of the coating is 98.05%.The coating formed on the surface of AZ31 was peeled off from the substrate by using a mechanical method and SEM observation of the cross-section showed that the coating consisted of three different layers.The innermost layer is a thick layer that consists of Mg(OH)_(2)and the intermediate layer is LDH,which is vertical to the substrate and the outmost layer is a thin but very dense deposit layer of LDH agglomerates with complexes of 2,5-PDCA and Mg.This kind of sediment/LDH/Mg(OH)_(2)three-layer composite structure was accountable for the increase in the corrosion resistance of AZ31 Mg alloy.