Newly discovered hydrothermal fields along the ultraslow-spreading Southwest Indian Ridge around 63°E

The ultraslow-spreading Southwest Indian Ridge （SWIR） to the east of the Melville fracture zone is characterized by very low melt supply and intensive tectonic activity. Due to its weak thermal budget and extremely slow spreading rate, the easternmost SWIR was considered to be devoid of hydrothermal activity until the discovery of the inactive Mt. lourdanne hydrothermal field （27°51＇S, 63°56＇E） in 1998. During the COMRA DYl15-20 cruise in 2009, two additional hydrothermal fields （i.e., the Tiancheng （27°51＇S, 63°55＇E） and Tianzuo （27°57＇S, 63°32＇E） fields） were discovered. Further detailed investigations of these two hydrothermal sites were conducted by Chinese manned submersible liaolong in 2014-2015. The Tiancheng filed can he characterized as a low- temperature （up to 13.2℃） diffuse flow hydrothermal field, and is hosted by fractured basalts with hydrothermal fauna widespread on the seafloor. The Tianzuo hydrothermal field is an inactive sulfide field, which is hosted by ultramafic rocks and controlled by detachment fault. The discovery of the three hydrothermal fields around Segment #11 which receives more melt than the regional average, provided evidence for local enhanced magmatism providing heat source to drive hydrothermal circulation. We further imply that hydrothermal activity and sulfide deposits may be rather promising along the easternmost SWIR.

Geological,physical,and chemical characteristics of seafloor hydrothermal vent fields

Seafloor hydrothermal vent fields(SHVFs) are located in the mid-ocean ridge(MOR),backarc basin(BAB),island arc and hot-spot environments and hosted mainly by ultramafic,mafic,felsic rocks,and sediments.The hydrothermal vent fluids of SHVFs have low oxygen,abnormal pH and temperature,numerous toxic compounds,and inorganic energy sources,such as sulfuric compounds,methane,and hydrogen.The geological,physical,and chemical characteristics of SHVFs provide important clues to understanding the formation and evolution of seafloor hydrothermal systems,leading to the determination of metal sources and the reconstruction of the physicochemical conditions of metallogenesis.Over the past two decades,we studied the geological settings,volcanic rocks,and hydrothermal products of SHVFs and drawn new conclusions in these areas,including:1) the hydrothermal plumes in the Okinawa Trough are affected by the Kuroshio current;2) S and Pb in the hydrothermal sulfides from MOR are mainly derived from their host igneous rocks;3) Re and Os of vent fluids are more likely to be incorporated into Fe-and Fe-Cu sulfide mineral facies,and Os is enriched under low-temperature(<200℃) hydrothermal conditions in global SHVFs;4) compared with low-temperature hydrothermal sulfides,sulfates,and opal minerals,high-temperature hydrothermal sulfides maintain the helium(He) isotopic composition of the primary vent fluid;5) relatively low temperature(<116℃),oxygenated,and acidic environment conditions are favorable for forming a native sulfur chimney,and a "glue pudding" growth model can be used to understand the origin of native sulfur balls in the Kueishantao hydrothermal field;and 6) boron isotope from hydrothermal plumes and fluids can be used to describe their diffusive processes.The monitoring and understanding of the physical structure,chemical composition,geological processes,and diverse organism of subseafloor hydrothermal systems will be a future hot spot and frontier of submarine hydrothermal geology.

Microbial community structure and nitrogenase gene diversity of sediment from a deep-sea hydrothermal vent field on the Southwest Indian Ridge

A sediment sample was collected from a deep-sea hydrothermal vent field located at a depth of 2 951 m on the Southwest Indian Ridge. Phylogenetic analyses were performed on the prokaryotic community using polymerase chain reaction（PCR） amplification of the 16 S rRNA and nifH genes. Within the Archaea, the dominant clones were from marine benthic group E（MBGE） and marine group I（MGI） belonging to the phyla Euryarchaeota and Thaumarchaeota, respectively. More than half of the bacterial clones belonged to the Proteobacteria, and most fell within the Gammaproteobacteria. No epsilonproteobacterial sequence was observed. Additional phyla were detected including the Actinobacteria, Bacteroidetes, Planctomycetes, Acidobacteria, Nitrospirae, Chloroflexi, Chlorobi, Chlamydiae, Verrucomicrobia, and candidate divisions OD1, OP11, WS3 and TM6, confirming their existence in hydrothermal vent environments. The detection of nifH gene suggests that biological nitrogen fixation may occur in the hydrothermal vent field of the Southwest Indian Ridge. Phylogenetic analysis indicated that only Clusters I and III NifH were present. This is consistent with the phylogenetic analysis of the microbial 16 S rRNA genes, indicating that Bacteria play the main role in nitrogen fixation in this hydrothermal vent environment.

Geochemical Features of Sulfides from the Deyin-1 Hydrothermal Field at the Southern Mid-Atlantic Ridge near 15?S

In this study, geochemical compositions of elements in sulfide samples collected from the Deyin-1 hydrothermal field near the 15?S southern Mid-Atlantic Ridge(SMAR) were analyzed by the X-ray fluorescence spectrometry(XRF) and inductively coupled plasma mass spectrometry(ICP-MS) to examine the enrichment regulations of ore-forming elements and hydrothermal mineralization. These sulfide precipitates can be classified macroscopically into three types: Fe-rich sulfide, Fe-Cu-rich sulfide and Fe-Zn-rich sulfide, and are characterized by the enrichment of base metal elements along with a sequence of Fe>Zn>Cu. Compared with sulfides from other hydrothermal fields on MAR, Zn concentrations of sulfides in the research area are significantly high, while Cu concentrations are relatively low. For all major, trace or rare-earth elements(REE), their concentrations and related characteristic parameters exhibit significant variations(up to one or two orders of magnitude), which indicates the sulfides from different hydrothermal vents or even a same station were formed at different stages of hydrothermal mineralization, and suggests the variations of chemical compositions of the hydrothermal fluid with respect to time. The hydrothermal temperatures of sulfides precipitation decreased gradually from station TVG10(st.TVG10) to st.TVG12, and to st.TVG11, indicating that the precipitation of hydrothermal sulfides is subjected to conditions changed from high temperature to low temperature, and that the hydrothermal activity of study area was at the late stage of a general trend of evolution from strong to weak. The abnormally low concentrations of REE in sulfides and their similar chondrite-normalized REE patterns show that REEs in all sulfides were derived from a same source, but underwent different processes of migration or enrichment, or sulfides were formed at different stages of hydrothermal mineralization. The sulfides collected from the active hydrothermal vent were mainly attributed to precipitating directly from the hydrothermal fluid, while those collected from the extinct hydrothermal chimney might have already been altered by the seawater. Generally, ore-forming elements in the sulfides can be divided into three groups: Fe-based element group, Cu-based element group and Zn-based element group. The first group includes Fe, Mn, Cr, Mo, Sn, Rb and bio-enriching elements, such as P and Si, reflecting the similar characteristics to Fe in the study area. And the second group contains Cu, W, Co, Se, Te and Bi, suggesting the similar behavior with Cu. Moreover, the third group includes Zn, Hf, Hg, Cd, Ta, Ga, Pb, As, Ag, Ni and Sb, which indicates the geochemical characteristics of most dispersed trace elements controlled by Zn-bearing minerals to some extent.

Sulfur isotopic composition of seafloor hydrothermal sediment from the Jade hydrothermal field in the central Okinawa Trough and its geological significance

Eighteen samples of hydrothermal sediments from the Jade hydrothermal field in the central Okinawa Trough have been analyzed. Sulfur isotopic values for 10 sulfide samples vary from 5.2× 10^(-3)to 7.2× 10^(-3), δ^(34)S values for 7 sulfate samples vary from 16.3 × 10^(-3) to 22.3 × 10^(-3), and 1 native sulphur sample has a δ^(34)S value of 8.2 × 10^(-3). The major sources of sulfur for hydrothermal sediment are intermediate to acid volcanic rocks and sea water sulfate, and it is possible that the partial sulfur of hydrothermal sediment is from the pelagic sediment by the interaction between hydrothermal fluid and sediment. The reasons of causing the distinct differences in sulfur isotopic values for sulfide samples from hydrothermal sediment ( compared with other hydrothermal fields), are the differences in the sources of sulfur, the magmatic activity and the tectonic evolution in different hydrothermal fields. The sulfur evolution is a long and complex process in the seafloor hydrothermal system, involving the ascending of heating sea water, the interaction between fluid and volcanic rocks, the mixing of sea water sulfate and sulfur from intermediate to acid volcanic rocks, and the fluid/pelagic-sediment interaction. And the interaction between sea water and intermediate to acid volcanic rocks is an important mechanism for the sulfur evolution in the Jade hydrothermal field.

Helium, neon and argon isotope compositions of fluid inclu-sions in massive sulfides from the Jade hydrothermal field, the Okinawa Trough

Helium, neon and argon isotope compositions of fluid inclusions have been measured in massive sulfide samples from theJade hydrothermal field in the central Okinawa Trough. Fluid-inclusion 3He/4He ratios are between 6.2 and 10.1 times theair value (Ra), and with a mean of 7.8Ra, which are consistent with the mid-ocean ridge basalt values [3He/4He≈(6Ra^11Ra)]. Values for 20Ne/22Ne are from 10.7 to 11.3, which are significantly higher than the atmospheric ratio (9.8).And the fluid-inclusion 40Ar/36Ar ratios range from 287 to 334, which are close to the atmosperic values (295.5). Theseresults indicate that the noble gases of trapped hydrothermal fluids in massive sulfides are a mixture of mantle- andseawater-derived components, and the helium of fluid inclusions is mainly from mantle, the nelium and argon isotopecompositions are mainly from seawater.

A data processing method for MAPR hydrothermal plume turbidity data and its application in the Precious Stone Mountain hydrothermal field

Hydrothermal plume is an important constituent of seabed hydrothermal circulation and is also one of the characteristics of active hydrothermal vents. Portable Miniature Autonomous Plume Recorders （MAPR） attached to a towed deep-sea instrument was used to search for hydrothermal plumes and hydrothermal vents. We introduced the basic principle of MAPR based on deep towing technology to detect plumes, then analyzed the factors affecting the quality of the MAPR data and presented a data correction method for MAPR, including instrument location correction, noise reduction processing, system error elimination and seawater background reduction. Finally we applied the method to analyze MAPR data obtained during the Chinese DY115-21 cruise on R/VDayang Iin the “Precious Stone Mountain” hydrothermal field on the Gala-pagos Microplate. The results provided a better understanding of the distribution of the hydrothermal activ-ity in this field, indicating the presence of a new hydrothermal vent.

Microbial community structure and diversity in deep-sea hydrothermal vent sediments along the Eastern Lau Spreading Centre

The aim of this study is to investigate microbial structures and diversities in five active hydrothermal fields＇ sediments along the Eastern Lau Spreading Centre （ELSC） in the Lau Basin （southwest Pacific）. Microbial communities were surveyed by denatured gradient gel electrophoresis （DGGE） and clone library analysis of 16S rRNA genes. The differences in microbial community structures among sediment samples from the five deep-sea hydrothermal sites were revealed by DGGE profiles. Cluster analysis of DGGE profiles sepa- rated the five hydrothermal samples into two groups. Four different 16S rRNA gene clone libraries, repre- senting two selected hydrothermal samples （19-4TVG8 and 19-4TVG11）, were constructed. Twenty-three and 32 phylotypes were identified from 166 and 160 bacterial clones respectively, including Proteobacteria, Bacteroidetes, Firmicutes, Nitrospirae and Planctomycetes. The phylum Proteobacteria is dominant in both bacterial libraries with a predominance of Gamma-Proteobacteria. A total of 31 and 25 phylotypes were obtained from 160 and 130 archaeal clones respectively, including Miscellaneous Crenarchaeotic Group, Marine Group Ⅰ and Ⅲ, Marine Benthic Group E, Terrestrial Hot Spring Crenarchaeota and Deep-sea Hy- drothermal Vent Euryarchaeota. These results show a variety of clones related to those involved in sulfur cycling, suggesting that the cycling and utilization of sulfur compounds may extensively occur in the Lau Basin deep-sea hydrothermal ecosystem.

The deep structure of the Duanqiao hydrothermal field at the Southwest Indian Ridge

Polymetalic sulfide is the main product of sea-floor hydrothermal venting, and has become an important sea-floor mineral resources for its rich in many kinds of precious metal elements. Since 2007, a number of investigations have been carried out by the China Ocean Mineral Resources Research and Development Association（COMRA）cruises（CCCs） along the Southwest Indian Ridge（SWIR）. In 2011, the COMRA signed an exploration contract of sea-floor polymetallic sulfides of 10 000 km2 on the SWIR with the International Seabed Authority. Based on the multibeam data and shipborne gravity data obtained in 2010 by the R/V Dayang Yihao during the leg 6 of CCCs21, together with the global satellite surveys, the characteristics of gravity anomalies are analyzed in the Duanqiao hydrothermal field（37°39′S, 50°24′E）. The ＂subarea calibration＂ terrain-correcting method is employed to calculate the Bouguer gravity anomaly, and the ocean bottom seismometer（OBS） profile is used to constrain the two-dimensional gravity anomaly simulation. The absent Moho in a previous seismic model is also calculated.The results show that the crustal thickness varies between 3 and 10 km along the profile, and the maximum crustal thickness reaches up to 10 km in the Duanqiao hydrothermal field with an average of 7.5 km. It is by far the most thicker crust discovered along the SWIR. The calculated crust thickness at the Longqi hydrothermal field is approximately 3 km, 1 km less than that indicated by seismic models, possibly due to the outcome of an oceanic core complex（OCC）.

Negative Haloes and Geochemical Field Systems of Hydrothermal Deposits

Primary haloes of hydrothermal deposits were previously considered as positive haloes. Although it has been recently suggested that primary haloes incude positive and negative ones, almost all the research work on primary haloes has still focused on positive haloes for various reasons. In order to understand the source of ore substances a number of large hydrothermal deposits related to magmatism including porphyry, skarn and vein type deposits have been studied. It has been found that negative haloes exist on the peripheries of positive haloes of a mineral deposit. On the basis of the study the authors propose the concept of the geochemical field system of ore-forming elements of hydrotherreal deposits, i. e., with the orebody as the centre outwards there occur the mineralized field, positive halo field, depleted field and background field successively.

Pourbaix diagrams to decipher precipitation conditions of Si-Fe-Mn-oxyhydroxides at the PACMANUS hydrothermal field

Utilizing Si, Fe and Mn concentrations within the end-member PACMANUS hydrothermal fluid, Si-Fe-Mn-H2O Pourbaix diagrams were constructed at 300℃and 25℃. ThePourbaix diagrams show that the main Si, Fe and Mn oxides species precipitating from the hydrothermal fluid were SiO2, Fe（OH）3, Fe3（OH）8, Mn3O4, and Mn2O3at 25℃. During mixing of hydrothermal fluid with seawater, SiO2 precipitated earlier than Fe-Mn-oxyhydroxides because of the lower stability boundary. Then Fe（OH）2 precipitated first, followed by Fe3（OH）8 and Fe（OH）3, and last, small amounts of Mn3O4 and Mn2O3 precipitated. Fe（OH）3was readily de-posited in alkaline solution with little influence by Eh. There were many Si-Fe-Mn-concentric particles in the polished sections of the massive precipitates collected from PACMANUS. In the concentric nucleus and ellipsoid, Si oxides precipitated first before the hydrothermal fluid had mixed with seawater. In the concen-tric nucleus, after the precipitation of Si oxides, the increase of pH and Eh promoted the precipitation of Mn oxides around the Si oxides. In the large ellipsoid, the precipitation of Fe was divided into two periods. In the early period, increase of pH value of hydrothermal fluid produced by low-temperature convection and an input of a small volume of seawater promoted a small amount of Fe（OH）3 to precipitate in the Si-rich core. In the late period, after complete mixing with seawater and the resultant fluid was close to neutral or slightly alkaline in pH, Fe（OH）3was easily precipitated from the solution and distributed around the Si-rich core.

A Lagrangian Particle Random Walk Model for Simulating A Deep-Sea Hydrothermal Plume with both Buoyant and Non-Buoyant Features

This paper presents a computational model of simulating a deep-sea hydrothermal plume based on a Lagrangian particle random walk algorithm. This model achieves the efficient process to calculate a numerical plume developed in a fluid-advected environment with the characteristics such as significant filament intermittency and significant plume meander due to flow variation with both time and location. Especially, this model addresses both non-buoyant and buoyant features of a deep-sea hydrothermal plume in three dimensions, which significantly challenge a strategy for tracing the deep-sea hydrothermal plume and localizing its source. This paper also systematically discusses stochastic initial and boundary conditions that are critical to generate a proper numerical plume. The developed model is a powerful tool to evaluate and optimize strategies for the tracking of a deep-sea hydrothermal plume via an autonomous underwater vehicle （AUV）.

Mineralogical characteristics of polymetallic sulfides from the Deyin-1 hydrothermal field near 15°S, southern Mid-Atlantic Ridge

A seafloor hydrothermal field, named Deyin-1 later, near 15°S southern Mid-Atlantic Ridge（SMAR） was newly found during the 22 nd cruise carried out by the China Ocean Mineral Resources Research ＆ Development Association（COMRA）. Sulfide samples were collected at three stations from the hydrothermal field during the26 th cruise in 2012. In this paper, mineralogical characteristics of the sulfides were analyzed with optical microscope, X-ray diffractometer, scanning electron microscope and electron microprobe to study the crystallization sequence of minerals and the process of hydrothermal mineralization. According to the difference of the ore-forming metal elements, the sulfide samples can be divided into three types：（1） the Ferich sulfide, which contains mainly pyrite and chalcopyrite;（2） the Fe-Cu-rich sulfide consisting predominantly of pyrite, chalcopyrite and isocubanite, with lesser amount of sphalerite, marmatite and pyrrhotine; and（3） the Fe-Zn-rich sulfide dominated by pyrite, sphalerite and marmatite, with variable amounts of chalcopyrite, isocubanite, pyrrhotine, marcasite, galena and gratonite. Mineral precipitations in these sulfides are in the sequence of chalcopyrite（isocubanite and possible coarse pyrite）, fine pyrite,sphalerite（marmatite）, galena, gratonite and then the minerals out of the dissolution. Two morphologically distinct generations（Py-I and Py-II） of pyrite are identified in each of the samples; inclusions of marmatite tend to exist in the coarse pyrite crystals（Py-I）. Sphalerite in the Fe-Zn-rich sulfide is characterized by a＂chalcopyrite disease＂ phenomenon. Mineral paragenetic relationships and a wide range of chemical compositions suggest that the environment of hydrothermal mineralization was largely changing. By comparison, the Fe-rich sulfide was formed in a relatively stable environment with a high temperature, but the conditions for the formation of the Fe-Cu-rich sulfide were variable. The Fe-Zn-rich sulfide was precipitated during the hydrothermal venting at relatively low temperature.

Magmatic-Hydrothermal Superlarge Metallogenic Systems——A Case Study of the Nannihu Ore Field

Located in the Qinling （秦岭） molybdenum metallogenic belt on the southern margin of North China craton, the Nannihu （南泥湖） molybdenum （-tungsten） ore field, consisting of the Nannihu, Sandaozhuang （三道幢）, and Shangfang （上房） deposits, represents a superlarge skarn-porphyry molybdenum （-tungsten） accumulation. Outside the ore field, there are some hydrothermal lead-zinc-silver deposits found in recent years, for example, the Lengshuibeigou （冷水北沟）, Yindonggou （银涧沟）, Yangshuwa （杨树凹）, and Yinhegou （银河沟） deposits. Ore-forming fluid geochemistry indicates that these deposits belong to the same metallogenic system. The hydrothermal solutions were mainly derived from primary magmatic water in the early stage and from the mixture of the primary magmatic water and meteoric water in the later stage, with an obvious decreasing tendency in temperature, salinity and gas-liquid ratio of fluid inclusions. Sulfur and lead isotope data show that the ore-forming substances and related porphyries were mainly derived from the lower crust, and a hidden magmatic chamber is indicated by aeromagnetic anomaly and drill hole data indicate that the Nannihu granite body extends to being larger and larger with depth increasing. The large-scale mineralization was the consequence of lithospheric extension during the late stage of the tectonic regime when the main compressional stress changed from NS-trending to EW-trending.

Near-surface wind field characteristics of the desert-oasis transition zone in Dunhuang,China

The desert-oasis transition zone(DOTZ)serves as a buffer area between the desert and oasis.Understanding its wind field characteristics is of great significance for the prevention and control of aeolian disasters in the oasis.In this study,we used meteorological data during 2013–2019 from the portable meteorological stations at five sites(site A on the edge of the oasis,sites B,C,and D in the DOTZ,and site O in the desert)in Dunhuang,China to analyze the near-surface wind field characteristics and their causes,as well as to reveal the key role of the DOTZ in oasis protection.The results showed that the mean wind speed,frequency of sand-driving wind,and directional variability of wind decreased from west to east within the DOTZ,and wind speed was significantly affected by air temperature.The terrain influenced the prevailing winds in the region,mainly from northeast and southwest.Only some areas adjacent to the oasis were controlled by southeasterly wind.This indicated that the near-surface wind field characteristics of the DOTZ were caused by the combined effects of local terrain and surface hydrothermal difference.At site D,the annual drift potential(DP)was 24.95 vector units(VU),indicating a low wind energy environment,and the resultant drift direction(RDD)showed obvious seasonal differences.Additionally,the DOTZ played an important buffering role between the desert and oasis.Compared with the desert,the mean wind speed in the oasis decreased by 64.98%,and the prevailing wind direction was more concentrated.The results of this study will be useful in interpreting the aeolian activity of the DOTZ in Dunhuang.

Origin of Cu in the PACMANUS hydrothermal field from the eastern Manus back-arc basin: evidence from mass balance modeling

Hydrothermal precipitates associated with active vents in the eastern Manus Basin, an actively opening back-arc basin in the Bismarck Sea, Papua New Guinea, are among the most Cu-rich on the modern seafloor. The volcanic rocks associated with this mineralization may be insufficiently enriched in Cu to account for the Cu content of the sulfides by simple leaching. The PACMANUS hydrothermal field lies in the eastern portion of the eastern Manus Basin. Mass balance modeling of the PACMANUS hydrothermal system indicates that simple leaching of a stationary reaction zone (0.144 km^3) by hydrothermal fluids cannot yield the Cu found in associated sulfide deposits because unacceptably high leaching, transportation and precipitation efficiencies are required to derive the Cu in sulfides by leaching processes. With 100% leaching, transport and precipitating efficiency, 0.166 km^3 of volcanic rocks would need to be leached to account for the Cu budget of hydrothermal sulfide deposits. The key requirement for forming metal-rich magmatic fluids is a large amount of metals available to enter the exsolved vapor phase. Magmas generated in the eastern Manus Basin inherently have high fO2 because of metasomatism of the mantle source by oxidized materials from the subducted slab, leading to copper enrichment in the magma chamber. Moreover, the presence of Cu in gas-rich melt inclusi on bubbles in Pual Ridge andesite is evidence that degassing and partitioning of Cu into the magmatic volatile phase has occurred in the eastern Manus Basin. Numerical mass balance modeling indicates that approximately 0.236 Mt Cu was potentially transferred to the hydrothermal system per cubic kilometer magma. Magmatic degassing seems to play a more significant role than leaching.

Numerical simulation for fluids mixing within seafloor hydrothermal sulfide deposit:taking the Trans-Atlantic Geo-Traverse (TAG) field for example

The formation mechanism of the large hydrothermal sulfide deposit is a complex geological process involving many controlling factors. Mixing between hydrothermal fluid and seawater plays a key role in this process. The results of the Ocean Drilling Program （ODP） indicate that mixing of the evolved seawater and hydrothermal fluid, which is wildly developed within the Trans-Atlantic Geo-Traverse （TAG） hydrothermal deposit, governs the internal structure and chemical compositions of the deposit to great extent. Taking the TAG field for example, the mixing processes of hydrothermal fluid with the seawater heated to different extent are calculated, so as to discuss the impact of hydrothermal fluid/seawater mixing on the formation process of the sulfide deposit. The results indicate that： （1） mixing between the heated seawater and hydrothermal fluid derived from the deep deposit is largely responsible for the wild precipitation of anhydrite within the TAG hydrothermal deposit; （2） 330-310℃ is a special temperature range in the mixing process; （3） the mixing and hydrothermal processes in different zones of the TAG hydrothermal deposit （TAG-1, TAG-2 and TAG-5, etc.） have been discussed based on the simulated results.

Study on the High Precision Acoustic Measurement Techniques for Determining Temperature Field Around Seafloor Hydrothermal Vent

This paper presents the basis of acoustic method used for temperature field measurement of seafloor hydrothermal vent and two techniques of the parabolic interpolation and the bending compensation of propagation paths of acoustic signal are introduced. Experimental research is performed to exactly rebuild the temperature field around hot springs on the floor of Qiezishan Lake, Yunnan, China. The accuracy of the travel time estimation has been improved based on the aforementioned technique and method. At the same time, by comparison of the results of temperature field with different means, the max absolute error, the maximum relative error and the root mean square error are given. It shows that the technique and the method presented in the paper can be applied to the temperature field measurement detector around the seafloor hydrothermal vent. It also has a good accuracy.

Characteristics of Sr, Nd and Pb isotopic compositions of hydrothermal Si-Fe-Mn-oxyhydroxides at the PACMANUS hydrothermal field, Eastern Manus Basin

Si-Fe-Mn-oxyhydroxides dredged at the PACMANUS （Papua New Guinea-Australia-Canada-Manus） hydrothermal field, Eastern Manus Basin, have 87Sr/SSSr=0.708 079-0.708 581; eNd=5.149 833-6.534 826; 208pb/204pb=38.245-38.440; 207pb/204pb=lS.503-15.560; 206pb/204pb=lS.682-18.783. s7sr/sSSr isotope ratios are relatively homogeneous and close to the value of the surrounding seawater （0.709 16）. The content of Sr in the samples contributed by seawater was estimated to be 76.7%-83.1% of total amount. The mixing temperature of hydrothermal fluids and seawater were ranging from 53.2℃ to 72.2℃ and the hydrothermal activities were unstable when the samples precipitated. The eNd values of all the samples are positive, which differ from the values of ferromanganese nodules （crusts） with hydrogenic origin. Nd was mainly derived from substrate rocks leached by hydrothermal circulation and preserved the hydrothermal signature. Ph isotopic compositions of most samples show minor variability except Sample #9-2 that has relatively high values of Pb isotopes. The Pb may be derived from the Eastern Manus Basin rocks leached by the hydrothermal fluid. The slightly lower 28pb/204pb and 207pb/204pb values of the samples indicated that the hydrothermal circulation in PACMANUS was not entire and sufficient, or that hydrothermal circulation had transient changes in the past. Si-Fe-Mn-oxyhydroxides in the samples preserved the heterogeneities of local rocks.

Control of the stress field on shallow seafloor hydrothermal paths:A case study of the TAG hydrothermal field

The stress state and rock mechanical properties govern the growth of faults and fractures,which constitute shallow hydrothermal pathways and control the distribution of seafloor massive sulfide(SMS)mounds in the seafloor hydrothermal field.The stress field has an important influence on the formation and persistence of hydrothermal pathways.Based on multibeam bathymetric data from the Trans-Atlantic Geotraverse(TAG)field,we establish two three-dimensional geological models with different scales to simulate the stress field,which investigate the characteristics of hydrothermal pathways and associated SMS mounds.The simulation results show that oblique faults and fissures form in the tensile stress zone and that mounds,including active and inactive hydrothermal mounds form in the compressive stress zone.Fault activity,which is related to the stress field,affects the opening and closing of hydrothermal channels and changes the permeability structure of subseafloor wall rock.Therefore,the stress field controls the development and persistence of shallow hydrothermal pathways.The features of shallow hydrothermal pathways in the stress field can provide geomechanical information that is useful for identifying favorable zone for SMS deposit formation.