Distribution of Biogenic Silica Content in Surface Sediments from the Southern South China Sea and Its Environmental Dignificance

Biogenic silica content was determined in 25 surface sediment samples from the southern South China Sea to study its distribution and its modern oceanic environmental significance, which may provide further scientific evidence for paleoceanography explaination. This study showed that biogenic silica content in surface sediments and its water depth have evidently positive correlation, and the correlation coefficient was up to 0.782. Biogenic silica content was very low in continental shelf shallows and could not reflect the productivity of siliceous micropaleontology in surface waters, which may be affected by sedimentary types and terrigenous matter dilution. Distribution of biogenic silica content in surface sediments from deep water areas showed that it could not only reflect the paleoproductivity of siliceous micropaleontology in surface waters, but also indicate the strong or feeble upwelling. Thus, it was further confirmed that using biogenic silica content in sediments to trace upwelling and its change was effective and reliable. The analyzed result showed that radiolariia and poriferous specula have more contribution for biogenic opal, comparing with diatom in surface sediments from the northern studied area, probably owing to the diatom dissolved easily away and eaten by other organisms with little effort. In the upwelling areas, radiolarian, diatom and poriferous specula all approximately showed high abundance, which was consistent with high biogenic silica content.

Grain size distribution characteristics in surface sediments near the Dalian Bay and their hydrodynamic environmental implications

Based on grain size analysis for the offshore surface sediments of the Dalian Bay, the assemblages and distribution characteristics of grain size were acquired, and their sources and sedimentary environments as well as the dominant factors were also discussed preliminarily. The results indicate that the silt has the highest content of 52% in average, followed by sand of 34%. Clay is enriched in the central plateau subregion with the average content of 14%. They are distributed with the strap-shape from east to west, which is consistent with the distribution pattern of minerals there. The coastal shallow-water slope in the north of the study area is characterized by the enrichment of coarser deposition, indicating strong hydrodynamic conditions and nearby source. With water depth increasing southward, silt and clay fraction, mainly enriched on a subaquatic platform with better sorting, are considered to be transported far away. To the further south of the study area with the deepest water off another subaquatic slop, coarse fraction is the highest, implying strong hydrodynamic conditions induced by tide currents which pass in and out the Bohai Sea and Yellow Sea Warm Current that enters the Bohai Sea.

Concentrations,Accumulation and Sources of PAHs in Surface Layer Sediments of Taizhou Bay

The concentrations, accumulation and sources of 15 polycyclic aromatic hydrocarbons （PAHs） had been studied or evaluated in the surface layer sediments of Taizhou Bay, China. It showed that the concentrations of PAHs ranged from 85.4 to 167.6 ng/g （averaged 138.62 ng/g）, and the highest level was found in Jiao Jiang Dock. Percentages of 2-, 3-, 4-, 5- and 6-cyclic aromatic hydrocarbons were 7.8 %, 42.1%, 33.3 %, 9.6 % and 7.2 % respectively. The accumulation indices of PAHs ranged from 532.7 to 1068.9 （averaged 807.5）, and the index of Phenanthrene was the highest （122.7）, while that of Benzo （a） Pyrene was the lowest （2.7） among them. In Taizhou Bay, PAHs in surface layer sediments came mainly from coal burning, partly from direct pollution of petroleum hydrocarbons.

Clay mineral distribution in surface sediments of the South China Sea and its significance for in sediment sources and transport

Clay minerals of surface sediments in the South China Sea （SCS） are analyzed with X-ray diffraction, and their transport is explored with a grain size trend analysis （GSTA） model. Results show that clay mineral types in various sedimentary environments have different sediment sources and transport routes. Sediments in the northern SCS （north of 20°N） between the southwest of Taiwan Island and the outer mouth of the Pearl River have high contents of illite and chlorite, which are derived mainly from sediments on Taiwan Island and/or the Yangtze River. Sediments from the Pearl River are characterized by high kaolinite and low smectite content, and most are distributed in the area between the mouth of the Pearl River and northeast of Hainan Island and transported vertically from the continental shelf to the slope. Characterized by high illite content, sediments from Kalimantan Island are transported toward the Nansha Trough. Sediments from Luzon Island are related with volcanic materials, and are transported westwards according to smectite distribution. On the Sunda Shelf, sediments from the Mekong River are transported southeast in the north while sediments from the Indonesian islands are transported northward in the south. Ascertaining surface sediment sources and their transport routes will not only improve understanding of modem transportation and depositional processes, but also aid paleoenvironmental and paleoclimatic analysis of the SCS.

Near surface velocity and Q_s structure of the Quaternary sediment in Bohai basin,China

Heavily populated by Beijing and Tianjin cities, Bohai basin is a seismically active Cenozoic basin suffering from huge lost by devastating earthquakes, such as Tangshan earthquake. The attenuation （Qp and Qs） of the surficial Quaternary sediment has not been studied at natural seismic frequency （1-10 Hz）, which is crucial to earthquake hazards study. Borehole seismic records of micro earthquake provide us a good way to study the velocity and attenuation of the surficial structure （0-500 m）. We found that there are two pulses well separated with simple waveforms on borehole seismic records from the 2006 Mw4.9 Wen＇an earthquake sequence. Then we performed waveform modeling with generalized ray theory （GRT） to confirm that the two pulses are direct wave and surface reflected wave, and found that the average vp and Vs of the top 300 m in this region are about 1.8 km/s and 0.42 km/s, leading to high ve/vs ratio of 4.3. We also modeled surface refleeted wave with propagating matrix method to constrain Qs and the near surface velocity structure. Our modeling indicates that Qs is at least 30, or probably up to 100, much larger than the typically assumed extremely low Q（-10）, but consistent with Qs modeling in Mississippi embayment. Also, the velocity gradient just beneath the free surface （0-50 m） is very large and velocity increases gradually at larger depth. Our modeling demonstrates the importance of borebole seismic records in resolving shallow velocity and attenuation structure, and hence may help in earthquake hazard simulation.

Investigation on Fe,Mn,Zn,Cu,Pb and Cd fractions in the natural surface coating samples and surficial sediments in the Songhua River,China

Natural surface coating samples （NSCSs） from the surface of shingles and surficial sediments （SSs） in the Songhua River, China were employed to investigate the relationship between NSCSs and SSs in fractions of heavy metals （Fe, Mn, Zn, Cu, Pb, and Cd） using the modified sequential extraction procedure （MSEP）. The results show that the differences between NSCSs and SSs in Fe fi＇actions were insignificant and Fe was dominantly present as residual phase （76.22% for NSCSs and 80.88% for SSs） and Fe-oxides phase （20.33% for NSCSs and 16.15% for SSs）. Significant variation of Mn distribution patterns between NSCSs and SSs was observed with Mn in NSCSs mainly present in Mn-oxides phase （48.27%） and that in SSs present as residual phase （45.44%）. Zn, Cu, Pb and Cd were found dominantly in residual fractions （〉48%）, and next in solid oxides/hydroxides for Zn, Pb and Cd and in easily oxidizable solids/compounds form for Cu, respectively. The heavy metal distribution patterns implied that Fe/Mn oxides both in NSCSs and SSs were more important sinks for binding and adsorption of Zn, Pb and Cd than organic matter （OM）, and inversely, higher affinity of Cu to OM than Fe/Mn oxides in NSCSs and SSs was obtained. Meanwhile, it was found that the distributions of heavy metals in NSCSs and SSs were similar to each other and the pseudo-total concentrations of Zn, Cu, Pb and Cd in NSCSs were greater than those in SSs, highlighting the more importance for NSCSs than SSs in controlling behaviours of heavy metals in aquatic environments.

Comparison of Pb and Cd adsorption to the surface coatings and surficial sediments collected in Xianghai Wetland

Surface coatings and surficial sediments were obtained in four natural waters in Xianghai Wetland in China to study the role of surface coatings and surficial sediments in controlling the transporting and cycling of heavy metals in aquatic environments. Pb and Cd adsorption to the surface coatings and surficial sediments were measured under controlled laboratory conditions(mineral salts solution with defined speciation, ionic strength 0 05 mol/L, 25℃ and pH 6 0 for surface coatings; and 0 005 mol/L CaCl 2 solution, 25℃ and pH 6 0 for surficial sediments). The Langmuir adsorption isotherm was applied to estimate equilibrium coefficients of Pb and Cd adsorption to the surface coatings and surficial sediments, and the component analyses of surface coatings and surficial sediments were also carried out. Correlation analyses between the maximum adsorption of Pb and Cd(Г max ) and the components in the surface coatings and surficial sediments suggested that there was a statistically significant trend for Pb and Cd adsorption(Г max ) to the surface coatings to increase with increasing in contents of Fe and Mn oxides in the surface coatings and surficial sediments. And the metal adsorption abilities of surface coatings were much stronger than those of surficial sediments, highlighting that in the same water, i.e. at the same pH and initial metal concentrations, the metals(such as lead and cadmium) in supernatant were feasible to be adsorbed by surface coatings than surficial sediments. The more importance of surface coatings than surficial sediments for adsorbing and cycling of heavy metals in aquatic environments was evidenced.

Variations in organic carbon loading of surface sediments from the shelf to the slope of the Chukchi Sea,Arctic Ocean

The content of organic carbon （OC） normalized to the specific surface area （SSA） of sediment is widely used to trace variations in OC loading （OC/SSA）. This study presents observations of OC/SSA of surface sediments collected in the Chukchi Sea, a typical Arctic marginal sea. Shelf sediments exhibit much higher OC/SSA values than slope sediments in the study area. Compared with OC/SSA values reported from the East Siberian Shelf and Mackenzie River, the slope sediments possess lower OC loading. This abrupt decrease in OC/SSA is mostly related to the lower primary production on slope as well as possible oxidization processes. The results of linear regression analysis between OC and SSA indicate a sedimentary source rock for the OC in the Chukchi Sea sediments. Moreover, shelf sediments with low SSA possess a larger rock OC fraction than slope sediments do. The dataset of the present study enables a more thorough understanding of regional OC cycling in the Chukchi Sea.

Characteristics of nitrogen forms in the southern Huanghai Sea surface sediments

The distributions of different forms of nitrogen in the surface sediments of the southern Huanghai Sea are different and affected by various factors. The contents of IEF-N, SOEF-N and TN gradually decrease eastward, and those of SAEF-N northward, while those of WAEF-N westward. Around the seaport of the old Huanghe (Yellow) River, the contents of both SOEF-N and TN are the highest. Among all the factors, the content of fine sediment is the predominant factor to affect the distributions of different forms of nitrogen. The contents of IEF-N, SOEF-N, and TN have visibly positive correlation with the content of fine sediments, and the correlative coefficient is 0.68, 0.58 and 0.71 respectively, showing that the contents of the three forms of nitrogen increase with those of fine sediments. The content of WAEF-N is related to that of fine sediments to a certain extent, with a correlative coefficient of 0.35; while the content of SAEF-N is not related to that of fine sediments, showing that the content of SAEF-N is not controlled by fine grain-size fractions of sediments. In addition, the distributions of different forms of nitrogen are also interacted one another, and the contents of IEF-N and SOEF-N are obviously affected by TN, while those of inorganic nitrogen (WAEF-N, SAEF-N and IEF-N) are not affected by SOEF-N and TN obviously, although they are interacted each other.

Measurement of Atrazine Adsorption onto Surficial Sediments(Natural Surface Coatings)——New Evidence for the Importance of Fe Oxides

To reveal the relative contribution of the components, Fe, Mn oxides or organic materials（OMs） in the surficial sediments（SSs）, and the natural surface coating samples（NSCSs） to adsorbing atrazine（AT）, a selective chemical extraction technique was employed, to remove the different components, and the adsorption characteristics of AT on the SSs and the NSCSs were investigated. The observed adsorptions of AT on the original and extracted SSs and NSCSs were analyzed by nonlinear least squares fitting（NLSF） to estimate the relative contribution of the components. The results showed that the maximum adsorption of AT on the NSCSs was greater than that in the SSs, before and after extraction treatments, implying that the NSCSs were more dominant than the SSs for organic pollutant adsorption. It was also found that the Fe oxides, OMs, and residues in SSs（NSCSs） facilitated the adsorption of AT, but Mn oxides directly or indirectly restrained the interaction of AT with SSs（NSCSs） particles. The contribution of the Fe oxides to AT adsorption was more than that of OMs; the greatest contribution to AT adsorption on a molar basis was from the Fe oxides in the nonresidual fractions, indicating that the Fe oxides played an important role in controlling the environmental behavior of AT in an aquatic environment.

Heavy metals pollution in water,suspended matter and surface sediment in typical mountainous urban river:A case study in Qingshui Stream in Chongqing,China

Based on a detailed environmental investigation of the whole Qingshui Stream catchments,samples of water and surface sediments were collected at 15 different places from the upper to the lower reaches of Qingshui Stream,and samples of suspended matter were obtained by filtrating the water samples. The concentrations of heavy metals (Cd,Cu and Zn) were measured in filtered water,suspended matter,and surface sediment by ICP-AES. The results show that the concentrations of the three heavy metals in filtered water are 0.18,6.6 and 17.67 μg/L,lower than that of the Fresh Water Quality Criteria (US EPA) and those of the plain urban rivers,but the contents of Cd,Cu and Zn are much higher than the mean values of rivers in the world and the background value in Jialing River basin. The heavy metals concentrations in the suspended matter from Qingshui Stream are 2.08,438.14 and 1 348.05 mg/kg,much higher than the corresponding background values of soils in Chongqing city. The heavy metals concentrations in the surface sediment from Qingshui Stream are 0.84,189.75 and 838.23 mg/kg,and the values of index of geoaccumulation Igeo of Cd,Cu and Zn show that their pollution degrees are moderate. The heavy metals exist in three transferable forms such as water,suspended matter and surface sediment in Qingshui Stream. The heavy metals concentrations in water are the lowest,and those in the suspended matter are the highest,so the ecological risk in suspended matter is the highest. The distribution tendencies of three metals in water,suspended matter and surface sediment in main riverbed are different.

Speciation of heavy metals in surface sediments from Suzhou Creek

Nine elements （As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn） in sediment samples at 7 sites （Site 1-7） from Suzhou Creek in Shanghai were analyzed with the Community Bareau of Reference （BCR） （sequential extraction （SE）） protocol and simultaneously extracted metals （SEM）/acid volatile sulfide （AVS） procedure to assess the metal bioavailability and toxicology in this area. The results showed that the BCR extraction can be utilized as an additional tool with the AVS method for assessing the potential bioavailability and toxicity of metals in sediments. Pollution from S5 （Site 5） was more severe than from other sites, especially Pb, Cu and Zn. Among all the sites, more than 80% of the total concentration of Fe existed in the residual fraction, As, Cr, Mn also dominated in the residual fraction （more than 50%）. While Cd, Ni and Zn （more than 35%） were mainly in the non-stable phase. Cu had a strong affinity with oxidizable phase and Pb varied from site to site. The SEM/AVS ratio was less than one in these sediments and results implied that the majority of Zn and Ni （〉 40%） were bound to AVS. In contrast, Pb, Cu and Cd were little bound to AVS due to their low ration of SEM-Pb, Cu, Cd to corresponding total concentration and relatively high Dorewater concentration.

Distribution characteristics of heavy metals in surface sediments and core sediments of the Shenzhen Bay in Guangdong Province,China

The concentration of zinc, chromium, cadmium, nickel, lead and copper was measured on both surface sediments and core sediments in the Shenzhen Bay. The average contents of all metals have exceeded the background values in the coastal zone of Guangdong Province. Cadmium is a heavy pollution matter which indicates a strong pollution level according to the ecological risk coefficient method. The ecological risk index of the whole area is 299 which belongs to middle and strong level. The area with strong pollution level is the near shore area closing to the inside of Shenzhen Bay, Shakou area is in the middle level while the weak pollution level occurs in Shenzhenhe Estuary according to ecological risk index. The four sediment cores can be divided into two parts based on lead-210 dating, sediments size analysis and economic development period in surrounding areas since 1950 with strong human intervention. The sediment size, deposition rate and human activities have positive relationship with the contents of heavy metals which directly impact the pollution level of heavy metals in sediments in Shenzhen Bay.

Distribution of ammonia-oxidizing Betaproteobacteria community in surface sediment off the Changjiang River Estuary in summer

The spatial distribution of ammonia-oxidizing Betaproteobacteria （βAOB） was investigated by FISH （fluorescence in situ hybridization） and DGGE （denaturing gradient get electrophoresis） techniques in the sediment off the Changjiang River Estuary. Sediment samples were collected from eight stations in June before the formation of hypoxia zone in 2006. The abundance of βAOB ranged from 1.87× 10^5 to 3.53×10^5 cells/g of sediment. βAOB abundance did not present a negative correlation with salinity, whereas salinity was implicated as the primary factor affecting nitrification rates. The DGGE profiles of PCR-amplified amoA gene fragments revealed that the βAOB community structure of sample S2 separated from other samples at the level of 40% similarity. The variations in composition ofβAOB were significantly correlated with the salinity, temperature, absorption ability of sediments and TOC. The statistical analysis indicates that theβAOB abundance was a main factor to influence nitrification rates with an influence ratio of 87.7% at the level of 40% biodiversity similarity. Considering the good correlation between βAOB abundance and nitrification estimates, the abundance and diversity of βAOB community could be expected as an indirect index of nitrification activity at the study sea area in summer.

Characteristics of nitrogen forms in the surface sediments of southwestern Nansha Trough,South China Sea

The area of the southwestern Nansha Trough is one of the most productive areas of the southern South China Sea.It is a typical semi-deep sea area of transition from shoal to abyssal zone.To understand distributions and roles of nitrogen forms involved in biogeochemical cycling in this area,contents of nitrogen in four extractable forms:nitrogen in ion exchangeable form(IEF-N),nitrogen in weak acid extractable form(WAEF-N),nitrogen in strong alkali extractable form(SAEF-N) and nitrogen in strong oxidation extractable form(SOEF-N),as well as in total nitrogen content(TN) in surface sediments were determined from samples collected from the cruise in April-May 1999.The study area was divided into three regions(A,B and C) in terms of clay sediment(<4 μm) content at <40%,40%-60% and >60%,respectively.Generally,region C was the richest in the nitrogen of all forms and region A the poorest,indicating that the finer the grain size is,the richer the contents of various nitrogen are.The burial efficiency of total nitrogen in surface sediments was 28.79%,indicating that more than 70% of nitrogen had been released and participated in biogeochemical recycling through sediment-water interface.

The environmental implication of diatom fossils in the surface sediment of the Changjiang River estuary(CRE) and its adjacent area

In order to depict the distribution of diatom fossils in surface sediments and to establish a reliable reference data for further paleoenvironmental study in the Changjiang (Yangtze) River estuary and its adjacent waters, the diatom fossils from 34 surface sediment samples and their relationship with environmental variables were analyzed by principal component analysis and redundancy correspondence analysis. The diversity and abundance of diatom fossils were analyzed. Some annual average parameters of the overlying water (salinity, temperature, turbidity, dissolved oxygen, depth, dissolved inorganic nitrogen, dissolved inorganic phosphate and dissolved inorganic silicate) were measured at each sampling site. A total of 113 diatom taxa and one silicoflagellate species were identified in the investigation area. Diatom fossils were better preserved in fine sediments. The absolute abundance of diatom fossils did not significantly diff er between inshore and off shore areas, the species diversity decreased from inshore to off shore. This may be because high nutrients and low salinity promoted the growth of more brackish species in coastal waters. The diatom taxa were divided into three groups, on the basis of their response and indication to environmental changes. For example, Actinocyclus ehrenbergii and Cyclotella stylorum were dominant in coastal waters (Group 1 and Group 3) with high nutrients and low salinity;the relative abundances of Paralia sulcata and Podosira stelliger were significantly higher in off shore sites (Group 2, average 39.5%), which were characterized by high salinity and deep water. Four environmental variables (salinity, dissolved inorganic nitrogen, temperature and water depth) explained the composition and distribution of diatom taxa independently ( P< 0.05), this finding can be applied in further paleoenvironmental reconstruction research in this area.

Grain-Size Distribution of Surface Sediments in the Bohai Sea and the Northern Yellow Sea: Sediment Supply and Hydrodynamics

The grain-size distribution of surface sediments in the Bohai Sea(BS) and the northern Yellow Sea(NYS), and its relationship with sediment supply and hydrodynamic environment were investigated based on grain-size compositions of surface sediments and modern sedimentation rates. The results showed that the surface sediments in the BS and the NYS were primarily composed of silty sand and clayey silt with a dominant size of silt. In addition, the Yellow River delivered high amount of water and sediments to the BS, and they are dominated in surface sediments(mainly silt) in the Bohai Bay, the Yellow River mouth, the center of the BS, and the north coast of Shandong Peninsula. The coarse-grained sediments were mainly deposited at the river mouth due to the estuarine filtration and physical sorting. Meanwhile, there was a significant relationship among the modern sedimentation rate, the surface sediment grain size distribution and sediment transport pattern. The areas with coarser surface sediments generally corresponded low sedimentation rates because of strong erosion;whereas the sedimentation rate was relatively high at the place that the surface sediments were fine-grained. Furthermore, the grain-size trend analysis showed that the areas with fine-grained surface sediments such as the mud area in the central BS and the upper Liaodong Bay were the convergent centers of surface sediments, except for the Bohai Bay and the subaqueous Yellow River Delta where offshore sediment transport was evident.

Microfossils, carbonate lysocline and compensation depth in surface sediments of the northeastern South China Sea

Based on the quantitative analyses of abundance of planktonic foraminifera, benthic foraminifera, calcareous nannofossils, the ratios of calcareous to siliceous microfossils, and the determination of carbonate contents in the surface sediments of the northeastern South China Sea, it has been found that the carbonate contents, the abundance of planktonic foraminifera and calcareous nannoplankton, and the ratio of calcareous microfossils decrease rapidly while the ratio of the benthic foraminifera to the total foraminiferal fauna, specific value of siliceous microfossils, and the percentage of the agglutinated tests in the benthic foraminiferal fauna increase with the water depth. The results indicate that the microfossils abundance and ratio, and the carbonate content are closely related to the carbonate lysocline and carbonate compensation depth (CCD) in the study area. In addition, the carbonate lysocline and the CCD are different between the southern and northern parts of the South China Sea. Both the lysocline and the CCD are deeper in the south with 2 600 and 3 600 m than in the north with 2 200 and 3 400 m, respectively.

Organic carbon and nitrogen isotopes in surface sediments from the western Arctic Ocean and their implications for sedimentary environments

Surface sediments from the Chukchi Sea and adjacent arctic deep sea were investigated for organic carbon and nitrogen isotopes （in δ13Corg and δ15Norg） as well as biogeni＇c silica （BSiO2）. δ13Corg and δ15Norg values of surface sediments in the study area fall between the end-member values of marine and terrestrial organic matter from the surrounding lands and seas, their variations reflect the changes of marine productivity and terrestrial supply in the study area. BSiO2 shows a similar distribution pattern with δ13Corg and δ15Norg, and can be used as an indicator of marine productivity. In the central-west Chukchi Sea and the Chukchi Rise, sediments have higher δ13Corg, δ15Norg and BSiO2 values, indicating the region has high marine productivity influenced by the nutrient-rich branches of the Pacific waters. In the coastal zone off northwestern Alaska, δ13Corg and δ15Norg values become lighter, indicating a weakening marine productivity and an increasing terrigenous supply due to the effects of the least nutrient-rich branch of the Pacific waters. In the north and the northeast of the study area （including the Chukchi Plateau, the Canada Basin and the Beaufort shelf）, δ13Corg, δ15Norg and BSiO2 have the lowest values, and the terrigenous organic matter becomes dominant in surface sediments because this region has the longest ice-covered duration, the least nutrient-rich seawater and the increasing supply of terrestrial materials from the Mackenzie River and the northern Alaska under the action of the clockwise Beaufort gyre. Because the subarctic Pacific waters are continuously discharged into the central basin of the Arctic Ocean through the study area, the nutrient pool in the Chukchi Sea can be considered as a typical open system, the ratio of δ15Norg to BSiO2 content show some tracers that the level of nutrient utilization is contrary to nutrient supply and marine productivity formed in seawater.

Experimental investigation of the inhibition of deep-sea mining sediment plumes by polyaluminum chloride

Deep-sea sediment disturbance may occur when collecting polymetallic nodules,resulting in the creation of plumes that could have a negative impact on the ecological environment.This study aims to investigate the potential solution of using polyaluminum chloride(PAC)in the water jet.The effects of PAC are examined through a self-designed simulation system for deep-sea polymetallic nodule collection and sediment samples from a potential deep-sea mining area.The experimental results showed that the optimal PAC dose was found to be 0.75 g/L.Compared with the test conditions without the addition of PAC,the presence of PAC leads to a reduction in volume,lower characteristic turbidity,smaller diffusion velocity,and shorter settling time of the plume.This indicates that PAC inhibits the entire development process of the plume.The addition of PAC leads to the flocculation of mm-sized particles,resulting in the formation of cm-sized flocs.The flocculation of particles decreases the rate of erosion on the seabed by around 30%.This reduction in erosion helps to decrease the formation of plumes.Additionally,when the size of suspended particles increases,it reduces the scale at which they diffuse.Furthermore,the settling velocity of flocs(around 10^(-2) m/s)is much higher that of compared to sediment particles(around 10^(-5) m/s),which effectively reduces the amount of time the plume remains in suspension.