Palaeogeomorphology and its control on the development of sequence stratigraphy and depositional systems of the Early Silurian in the Tarim Basin

The Silurian in the Tarim Basin was deposited on the basement deformed by the Caledonian tectonic movements at the end of the Late Ordovician. The development and distribution of sedimentary sequences of the Early Silurian have been clearly controlled by the palaeogeomorphology of the Late Ordovician. Based on unconformity characteristics and distribution of erosion, several zones can be differentiated including a high uplifted erosion zone, a transitional slope zone and a depression zone. The central and west Tabei Uplift zones show high angular unconformity and intense erosion. The Tarim Basin in the late Ordovician shows characteristics of higher in the west, lower in the east while higher in the south, lower in the north. The Early Silurian mainly developed transgressive and highstand systems tracts on the whole, while the lowstand systems tract only developed partly below the slope break. The palaeogeomorphology controlled the elastic source supply and deposit distribution. Braided delta system and tidal flat-estuary system were deposited. The duration of uplifting of the Tazhong paleo- uplift was longer than that of the Tabei paleo-uplift, and deposition was later. This led to the lower and middle members of the Kepingtage Formation missing in that area. As a large-scale transgression occurred during the deposition period of the upper member of the Kepingtage Formation, sediment from the west of the basin was transported and deposited by tides and waves, forming tidal-marine debris systems above the uplift. Proximal alluvial fan and fan delta coarse elastic deposits developed in proximal uplift zone in the east and southeast of the basin, and braided delta put forward to the transitional zone between the edge of uplift and the sea. Large-scale tidal channel, sub-distributary channel and mouth bar of the delta front can form favorable reservoirs, and they are primary targets for oil and gas exploration. This research on sequence-depositional systems development and distribution controlled by palaeogeomorphology is significant in guiding the prediction of reservoir sandstones.

Sequence stratigraphy and depositional systems in the Paleogene,Liaodong Bay

Based on drilling and seismic data, the Paleogene developed in Liaodong Bay can be divided into five third-order sequences bounded by six sequence boundaries. Through analyzing depositional systems in each sequence in detail, the Es-3 time was defined as fast rifting. During the deposition of the Es-3 member, the lake basin was continuous along the N-S direction but compartmentalized along the E-W direction by several N-S trending faults. Deposition was dominated by steep slope fans and fan deltas. The time of Es-2 and Es-1 was stable settling. The lake basin expanded substantially. The fan delta system and braided fluvial system were developed. Carbonate and clastic deposits were formed on the Liaoxi （west Liaohe） Rise. The time of Ed-3 time was again fast rifting. During this time, shale was deposited. In the time of Es-2, tectonic movement weakened. The basin was higher in the west and north, and lower in the east and south. A series of delta depositional systems were developed and smallscale slumping turbidite fans were present in semi-deep lake to deep lake. In the time of Ed-1, tectonic movement stopped. Flood plain deposition occurred. Finally the paper presents the characteristics of evolution and distribution of depositional systems both vertically and horizontally.

On Lacustrine Depositional Systems and Coal Accumulation in Baise Basin

Baise basin is a semi-graben type , pan-shaped faulted basin of Early Tertiary , in which carbonate lacustrine deposits and elastic lacustrine deposits developed . The assemblages of Gilbert-type delta-lakes ,littoral ,shallow and deep water fades are recognized . Based on grain size , the clastic lacustrine deposit systems can be grouped in three kinds of depositional sequences of progressive deposition : (1)from coarse to fine , (2)from fine to coarse and (3) from fine to coarse and then to fine agan . This was controlled mainly by hydrodynamic factor of lake bottom type .Lake shore was an important place for coal accumulation and peatmoor development . It had long time for coal accumulation and there was a very little amount of minerals into the basin ,and the thick coal layer and high quality coal developed m the zone where initial lake bottom was plan-like and the surface stream flow was weak .Peat accumulation advanced from the margin to the center of basin .Carbonate lakes contained much water ,very high preponderant contenis of coagel ,low inert contents and no fusinite in the coal .

Status and Trends in Research on Deep-Water Gravity Flow Deposits

Deep-water gravity flows are one of the most important sediment transport mechanisms on Earth. After 60 years of study, significant achievements have been made in terms of classification schemes, genetic mechanisms, and depositional models of deep-water gravity flows. The research history of deep-water gravity flows can be divided into five stages： incipience of turbidity current theory; formation of turbidity current theory; development of deep-water gravity flow theory; improvement and perfection of deep-water gravity flow theory; and comprehensive development of deep-water gravity flow theory. Currently, three primary classification schemes based on the sediment support mechanism, the rheology and transportation process, and the integration of sediment support mechanisms, rheology, sedimentary characteristics, and flow state are commonly used.Different types of deep-water gravity flow events form different types of gravity flow deposits. Sediment slump retransportation mainly forms muddy debris flows, sandy debris flows, and surge-like turbidity currents. Resuspension of deposits by storms leads to quasi-steady hyperpycnal turbidity currents （hyperpycnal flows）. Sustainable sediment supplies mainly generate muddy debris flows, sandy debris flows, and hyperpycnal flows. Deep-water fans, which are commonly controlled by debris flows and hyperpycnal flows, are triggered by sustainable sediment supply; in contrast, deep-water slope sedimentary deposits consist mainly of debris flows that are triggered by the retransportation of sediment slumps and deep-water fine-grained sedimentary deposits are derived primarily from fine- grained hyperpycnal flows that are triggered by the resuspension of storm deposits. Harmonization of classification schemes, transformation between different types of gravity flow deposit, and monitoring and reproduction of the sedimentary processes of deep-water gravity flows as well as a source-to-sink approach to document the evolution and deposition of deep-water gravity flows are the most important research aspects for future studies of deep-water gravity flows study in the future.

Microfacies of Deep-water Deposits and Forming Models of the Chinese Continental Scientific Drilling-SKII

Extensive transgression of lake water occurred during the Cretaceous Qingshankou Stage and the Nengjiang Stage in the Songliao basin, forming widespread deep-water deposits. Eleven types of microfacies of deep-water deposits have been recognized in the continuous core rocks from the SKII, including mudstone of still water, marlite, dolostone, off shale, volcanic ashes, turbidite, slump sediment, tempestite, seismite, ostracoda limestone and sparry carbonate, which are divided into two types： microfacies generated due to gradually changing environments （Ⅰ） and microfacies generated due to geological events （Ⅱ）. Type Ⅰ is composed of some special fine grain sediments such as marlite, dolomite stone and oil shale as well as mudstone and Type Ⅱ is composed of some sediments related to geological events, such as volcanic ashes, turbiditie, slump sediment, tempestite, seismite, ostracoda limestone. The formation of sparry carbonate may be controlled by factors related to both environments and events. Generally, mudstone sediments of still water can be regarded as background sediments, and the rest sediments are all event sediments, which have unique forming models, which may reflect controlling effects of climatics and tectonics.

Deep-water gravity flow deposits in a lacustrine rift basin and their oil and gas geological significance in eastern China

The types,evolution processes,formation mechanisms,and depositional models of deep-water gravity flow deposits in a lacustrine rift basin are studied through core observation and systematic analysis.Massive transport of slide and slump,fluid transport of debris flow and turbidity currents are driven by gravity in deep-water lacustrine environment.The transformation between debris flow and turbidity current,and the transformation of turbidity current between supercritical and subcritical conditions are the main dynamic mechanisms of gravity flow deposits in a lake basin.The erosion of supercritical turbidity current controls the formation of gravity-flow channel.Debris flow deposition gives rise to tongue shape lobe rather than channel.Deep-water gravity flow deposits are of two origins,intrabasinal and extrabasinal.Intrabasinal gravity flow deposits occur as single tongue-shape lobe or fan of stacking multiple lobes.Extrabasinal gravity-flow deposits occur as sublacustrine fan with channel or single channel sand body.However,the nearshore subaqueous fan is characterized by fan of stacking multiple tongue shape lobes without channel.The differential diagenesis caused by differentiation in the nearshore subaqueous fan facies belt results in the formation of diagenetic trap.The extrabasinal gravity flow deposits are one of the important reasons for the abundant deep-water sand bodies in a lake basin.Slide mass-transport deposits form a very important type of lithologic trap near the delta front often ignored.The fine-grained sediment caused by flow transformation is the potential"sweet spot"of shale oil and gas.

Laumontitization as an Exploration Indicator of Epithermal Gold Deposits: A Case Study of the Axi and Other Epithermal Systems in West Tianshan, China

In the light of field investigation, microscopic study, X\|ray phase analysis and mineral infrared spectral analysis, it is considered that laumontitization is of extensive occurrence in the Axi gold orefield. The development of laumontitization and its relationship to mineralization show that the laumontitization appeared mainly at the top of and in the periphery of orebodies, and occurred at the edge of the epithermal system or at the late stage of epithermal system evolution. Therefore, laumontitization can be used as an exploration indicator of epithermal gold deposits. The fluids responsible for laumontitization in the Axi gold orefield are similar to those producing hot spring\|type gold deposits or those from modern geothermal fields. Epithermal mineralization of the Axi gold deposit was dated at Carboniferous, indicating that the West Tianshan of China is a region favorable to epithermal\|type gold mineralization and preservation. Hence the West Tianshan of China is a target area for exploring epithermal gold deposits.

PRACTICAL AND PREDICTIVE MODELLING OF ORE DEPOSITS IN HYDROTHERMAL SYSTEMS

Over the pastfive years,we have been making efforts to develop a practical and predic- tive tool to exploreforgiantore deposits in hydrothermal systems. Towards this goal,a sig- nificant progress has been made towards a better understanding of the basic physical and chemical processes behind ore body formation and mineralization in hydrothermal systems. On the scientific developmentside,we have developed analytical solutions to answerthe fol- lowing scientific questions:(1) Can thepore- fluid pressure gradientbemaintained atthe val- ue of the lithostaticpressure gradientin the uppercrustof the Earth?and(2 ) Can convective pore- fluid flow take place in the uppercrustof the Earth ifthere is a fluid/mass leakage from the mantle to the upper crustof the Earth?On the modelling developmentside,we have developed numerical methods to model the following problems:(1) convective pore- fluid flow in two- dimensional hydrothermal systems;(2 ) coupled reactive pore- fluid flow and multiple species transport in porous media;(3) precipitation and dissolution of minerals and rock al- teration in the upper crust of the Earth;(4 ) double diffusion driven reactive flow transport in deformable fluid- saturated porous media with particular consideration of temperature- de- pendentchemical reaction rates;(5 ) pore- fluid flow patterns neargeological lenses in hydro- dynamic and hydrothermal systems;(6 ) dissipative structures for nonequilibrium chemical reactions in fluid- saturated porousmedia;(7) convectivepore- fluid flow and the related min- eralization in three- dimensional hydrothermal systems;(8) fluid- rock interaction problems associated with the rock alteration and metamorphic process in fluid- saturated hydrothermal/ sedimentary basins;and (9) various aspects of the fully coupled problem involving material deformation,pore- fluid flow,heattransferand species transport/ chemical reactionsin pore- fluid saturated porous rock masses. The above- mentioned work has significantly enriched our knowledge about the physical and chemical processes related to ore body formation and mineralization in the upper crustof the

Depositional System of the Carboniferous Huanglong Formation,Eastern Sichuan Basin:Constraints from Sedimentology and Geochemistry

Using analyses of the lithology,sequences,paleoenvironment,and tectonic setting,the depositional system of the Carboniferous Huanglong Formation in the eastern Sichuan Basin was identified.The lithological characteristics of the Lower Member,Middle Member,and Upper Member were analyzed and classified.Before the use of carbon,oxygen,and strontium isotopes in the analysis,all of the geochemical data were tested for validity.On the basis of the Z values obtained from carbon and oxygen isotopes,the paleoenvironments of the three members were elucidated.Lower Member was dominantly an enclosed marine environment with intense evaporation and little freshwater input into the sea.Middle Member developed in a semi-enclosed to normal marine environment with many rivers.Upper Member was formed in a normal marine environment.The east Sichuan Basin was enclosed by paleouplifts before the deposition of the Huanglong Formation,forming a relatively enclosed depositional setting.Paleogullies developed in the Silurian strata that underlie the Carboniferous rocks;these paleogullies can be identified.On the basis of a comprehensive analysis,we propose that the Huanglong Formation developed in a platform system.Four microfacies were identified：supratidal flat,dolostone flat,grain shoal,and shelf microfacies.The high-permeability and high-porosity characteristics of the grain shoal microfacies are favorable for hydrocarbon accumulation,while the supratidal flat and shelf microfacies developed very few high-quality reservoirs.The paleogullies,in which increased amounts of grain shoal microfacies developed,controlled the distribution of high-quality reservoirs.

Negative Haloes and Geochemical Field Systems of Hydrothermal Deposits

Primary haloes of hydrothermal deposits were previously considered as positive haloes. Although it has been recently suggested that primary haloes incude positive and negative ones, almost all the research work on primary haloes has still focused on positive haloes for various reasons. In order to understand the source of ore substances a number of large hydrothermal deposits related to magmatism including porphyry, skarn and vein type deposits have been studied. It has been found that negative haloes exist on the peripheries of positive haloes of a mineral deposit. On the basis of the study the authors propose the concept of the geochemical field system of ore-forming elements of hydrotherreal deposits, i. e., with the orebody as the centre outwards there occur the mineralized field, positive halo field, depleted field and background field successively.

Control of relay structure on mineralization of sedimentary-exhalative ore deposit in growth faults of graben systems

Based on the study of ore deposits and orebody structures of two sedimentary-exhalative ore deposits, i.e., Changba and Xitieshan Ore Deposits, it is found that the structural patterns of metallogenic basin of seafloor exhalative sulfide deposits in the ancient graben systems are controlled by relay structures in normal faults. The shapes of metallogenic basins are composed of tilting ramp, fault-tip ramp and relay ramp, which dominate migration of gravity current of ore-hosted fluid and shape of orebody sedimentary fan in the ramp. By measuring and comparing the difference of length-to-thickness ratios of orebody sedimentary fan, the result shows that the occurrence of the ramp has a remarkable impact on the shape of orebody.

Depositional System and Seismic Response of Subsurface Brines Reservoirs in Western Qaidam Basin,China

It is a major continuous depocenter in Dalangtan area,western Qaidam basin since Early Cenozoic,which is most important Neogene salt deposits center in Qaidam basin.The Miocene Saline lake was developed firstly in

Ore-Fluid Systems of Fine Disseminated Gold Deposits Along the Southeastern Margin of the Yangtze Plate

Fine disseminated gold deposits occurring along the southeastern margin ofthe Yangtze Plate belong to the epithermal type resulting from different systems of oreforming fluids. According to their sources, the ore-forming fluids can be divided intofour systems: a) meteoric water system; b) oil-brine system; c) basin-brine system; andd) magmatic-formation water system. The four hydrothermal systems are responsiblefor four types of gold deposits, respectively The meteoric water system produces hotspring gold deposits. The basin-brines, which are derived from fissure water, structuralwater and absorbed water sealed up in strata, are responsible for the basin-brine-typedeposits. The oil-brine system, having the same source as the basin-brines, is characterizedby the involvment of organic matter and is responsible for the oil-brine-type deposits.Inclusion fluld data show that there are obvious differences in chemical compesition andcarbon, oxygen, hydrogen and sulfur isotopes for these hydrothermal systems. Differentmetalloenic provinces, in which one of the four systems is dominant, can be recognizedin the region.

Characteristics of deep water depositional system in Campos basin, Brazil

To make clear about the sedimentary facies types and distribution of deep water sandstone reservoirs in Campos basin of Brazil,this paper researches the characteristics of deep-water sedimentary system in Campos basin through the comprehensive analysis of drilling,logging and seismic data.There are 3 subfacies and 7 microfacies in the study area.There are 3 channels from south to north in Upper Cretaceous Maastrichtian,and the sedimentary incised valley and compound channels developed in micro-salt basin are the main deep water depositional types.The Paleocene to Eocene dominated by sedimentary incised valley and eroded compound channel deposits,also include 3 channel systems.From Oligocene to Miocene,the main deposition type is lobe,which is mainly distributed in central-north of the basin.Corresponding to deep water depositional stages,3 kinds of depositional models are found.From Turonian to Maastrichtian of Upper Cretaceous,with tectonic uplift,strong source material supply,and the negative topography produced by salt rock movement providing favorable accommodation for sand deposition,the depositional model was terrigenous direct feed mechanism with sedimentary incised valley and compound channels in micro salt basin.From Paleocene to Eocene,as the amplitude of tectonic uplift reached the maximum and the accompanied erosion peaked,accommodation space offered by micro salt basin was leveled up;the depositional model was terrigenous direct feed mechanism with sedimentary valley and incised compound channels.From Oligocene to Miocene,because of sable tectonics,sea level fluctuation is the main controlling factor for deep water deposition,so the depositional model was wide shelf indirect feed mechanism with bypass incised valley and lobe.The analysis of the characteristics and controlling factors of the 3 types deep-water sedimentary systems during 3 different stages in Campos Basin can provide valuable reference for the oil exploration in deep-water deposits in the Campos Basin and across the world.

Sedimentary architecture models of deepwater turbidite channel systems in the Niger Delta continental slope,West Africa

This paper studied an architecture model of turbidite channel systems based on the shallow- layer high resolution 3D seismic information in the deepwater area in the Niger Delta continental slope, West Africa as a prototype model. Different types of channel systems were identified and the corresponding architecture models were established. The controlling factors, evaluation criteria and spatial distribution of different channel systems were analyzed. This study shows that turbidite channel systems of West Africa could be classified into three types; confined, semi-confined and unconfined, according to the condition of canyon and the levees on both sides. Oil one hand, along the transport direction, channel system evolves from confined to unconfined. Within channel systems, channel complexes, including two types of incised and enveloped, are the most important reservoir bodies. On the other hand, there is a channel complex evolution from incised to enveloped vertically. The geological factors exert impacts of different levels on the architecture of the turbidite channels in different sedimentary systems or even within the same system.

Stratigraphic Sequence and Sedimentary Systems in the Middle-Southern Continental Slope of the East China Sea from Seismic Reflection Data: Exploration Prospects of Gas Hydrate

Many evidences for gas hydrate bearing sediments had been found in the continental slope of the East China Sea,such as bottom simulating reflections(BSRs),undersea gas springs,pyrite associated with methane leakage,mud diapirs/mud volcanos,bottom-water methane anomalies and so on.In this study,six key stratigraphic interfaces including T_0(seafloor),T_1(LGM,23 kyr B.P.),T_2(2.58 Myr),T_3(5.33 Myr),T_4(11.02 Myr)and T_5(16.12 Myr)were identified,and then five third-order sequences of SQIII1 to SQIII5 were divided.However,T5 in southern continental slope is not found,which shows that the middle-northern Okinawa Trough had begun to rift in the early Miocene,earlier than the southern segment.Four system tracts including lowstand systems tract(LST),transgressive systems tract(TST),highstand systems tract(HST)and falling stage systems tract(FSST)are further divided.The marine erosion interface of 11.02 Myr and regressive unconformity interface of 23 kyr B.P.indicate two large-scale sea level drop events in the research area.Seven typical seismic facies identified in the continental slope are continental shelf-edge deltas,littoral fluvial-delta plains,incised channels or submarine canyons,slope fans,submarine fans or coastal sandbars,littoral-neritic finegrained sediments,mud volcanos and some other geological bodies respectively.The minimum water depth for hydrate occurrence in the Okinawa Trough is 630 m,and the thickness of gas hydrate stability zone in continental slope is between 0 and 590 m.The calculated bottom boundary of hydrate stability zone is slightly deeper than BSRs on the seismic sections.The re-depositional turbidite sand bodies,such as canyon channels,slope fans and submarine fans developed in Quaternary strata,are the predominant hydrate reservoirs.According to developing process,the dynamic accumulation of hydrate systems can be divided into three evolutionary stages including canyon erosion and hydrate stability zone migration stage,sediments destabilizing and methane leakage stage,and channel filling and hydrate re-occurrence stage.

Late Paleozoic Fluid Systems and Their Ore-forming Effects in the Yuebei Basin,Northern Guangdong,China

Based on detailed and systematic researches of the geology of ore deposits, fluid inclusions and isotope geochemistry etc., and regarding the Late Paleozoic fluid system of the Yuebei Basin as an integrated object in this paper, we have revealed the temporo-spatial evolution law of the basin＇s fluid system and discussed its ore-forming effects by simulating and analyzing the distribution of ore-forming elements, the fluid thermodynamics and dynamics of evolution processes of this basin. The results show that Late Paleozoic ore-forming fluid systems of the Yuebei Basin include four basic types as follows. （1） The sea floor volcanic-exhalation system developed during the rapid basin slip-extension stage in the Mid-Late Devonian, which affected the Dabaoshan region. It thus formed the Dabaoshan-type Cu-Pb-Zn-Fe sea floor volcanic-exhalation sedimentary deposits. （2） The compaction fluid system developed during the stable spreading and thermal subsidence-compression stage of the basin in the Mid-Late Devonian. The range of its effects extended all over the whole basin. It resulted in filling-metasomatic deposits, such as the Hongyan-type pyrite deposits and pyrite sheet within the Fankou-type Cu-Pb-Zn-S deposits. （3） The hot water circulation system of sea floor developed during the stage of basin uplifting and micro-aulacogen from the late Late Carboniferous to Middle Carboniferous. The range of its effects covered the Fankou region. It thus formed MVT deposits, such as the main orebody of the Fankou-type Pb-Zn-S deposits. （4） The gravity fluid system developed during the stage of fold uplifting and the basin closed from Middle Triassic to Jurassic, forming groundwater hydrothermal deposits, e.g. the veinlet Pb-Zn-calcite orebodies of the Fankou-type Pb-Zn- S deposits. Migration and concentration of the ore-forming fluids were constrained by the state of temporo-spatial distribution of its fluid potential. Growth faults not only converged the fluids and drove them to move upwards, but also the fluids often crossed the faults to the edges of the basin at the bottom of these faults and the lithologic interfaces, and even migrated to the basin＇s edges from top to bottom along the faults, which may be one of the basic reasons for the stratabound deposits to cluster mainly along the contemporaneous faults on the inner border of the basin. The superposed mineralization resulting from the multi-stage activity of contemporaneous faults and ore-forming fluid systems in the basin may be one of the key factors for forming superlarge ore deposits.

High-resolution sequence architecture and depositional evolution of the Quaternary in the northeastern shelf margin of the South China Sea

The northeastern shelf margin of the South China Sea(SCS) is characterized by the development of large scale foresets complexes since Quaternary. Based on integral analysis of the seismic, well logging and paleontological data, successions since ～3.0 Ma can be defined as one composite sequence, consist of a set of regional transgressive to regressive sequences. They can be further divided into six 3 rd order sequences(SQ0–SQ5) based on the Exxon sequence stratigraphic model. Since ～1.6 Ma, five sets of deltaic systems characterized by development of wedge-shaped foresets complexes or clinoforms had been identified. High-resolution seismic data and the thick foresets allowed further divided of sub-depositional sequences(4 th order) of regression to transgression, which is basically consistent with published stacked benthic foram O-isotope records. Depositional systems identified in the study area include deltaic deposits(inner-shelf deltas and shelf-edge deltas), incised valleys, and slope slumping massive deposits. Since ～1.6 Ma, clinoforms prograded from the southern Panyu Lower Uplift toward the northern Baiyun Depression, shelf slope break migrated seaward, whereas the shelf edge of SQ0 migrated landward. The development of incised valleys in the continental shelf increased upward,especially intensive on the SB3 and SB2. The slumping massive deposits increased abruptly since SB2, which corresponds to the development of incised valleys. The evolution of depositional systems of continental slope mainly controlled by the combined influence of sea level changes, tectonic movements, sediment supply and climate changes. Since ～3.0 Ma, relative sea level of the northern SCS had been experienced transgression(～3.0 Ma BP) to regression(～1.6 Ma BP). The regional regression and maximum transgressions of the composite sequences were apparently enhanced by uplift or subsidence related to tectono-thermal events. In addition,climatic variations including monsoon intensification and the mid-Pleistocene transition may have enhanced sediment supply by increasing erosion rate and have an indispensable influence on the development of the incised valleys and 5 sets of deltaic systems since ～1.6 Ma.

Magmatic-Hydrothermal Superlarge Metallogenic Systems——A Case Study of the Nannihu Ore Field

Located in the Qinling （秦岭） molybdenum metallogenic belt on the southern margin of North China craton, the Nannihu （南泥湖） molybdenum （-tungsten） ore field, consisting of the Nannihu, Sandaozhuang （三道幢）, and Shangfang （上房） deposits, represents a superlarge skarn-porphyry molybdenum （-tungsten） accumulation. Outside the ore field, there are some hydrothermal lead-zinc-silver deposits found in recent years, for example, the Lengshuibeigou （冷水北沟）, Yindonggou （银涧沟）, Yangshuwa （杨树凹）, and Yinhegou （银河沟） deposits. Ore-forming fluid geochemistry indicates that these deposits belong to the same metallogenic system. The hydrothermal solutions were mainly derived from primary magmatic water in the early stage and from the mixture of the primary magmatic water and meteoric water in the later stage, with an obvious decreasing tendency in temperature, salinity and gas-liquid ratio of fluid inclusions. Sulfur and lead isotope data show that the ore-forming substances and related porphyries were mainly derived from the lower crust, and a hidden magmatic chamber is indicated by aeromagnetic anomaly and drill hole data indicate that the Nannihu granite body extends to being larger and larger with depth increasing. The large-scale mineralization was the consequence of lithospheric extension during the late stage of the tectonic regime when the main compressional stress changed from NS-trending to EW-trending.