Wind-Vortex-Induced Vibrations of a Deepwater Jacket Pipe and Vibration Suppression Using a Nonlinear Energy Sink

The purpose of this study is to investigate the suppression effect of a nonlinear energy sink(NES)on the wind-vortex-induced pipe vibration and explore the influence of damping,stiffness,and NES installation position on the suppression effect.In this work,the wind-vortex-induced vibration of an elastic pipe of a deepwater jacket was studied,and vibrations were suppressed by using an NES.A van der Pol wake oscillator was used to simulate vortex-induced force,and the dynamic equation of the pipe considering the NES was established.The Galerkin method was applied to discretize the motion equation,and the vortex-induced vibration(VIV)of the pipe at reduced wind speeds was numerically analyzed.The novelty of this research is that particle swarm optimization was used to optimize the parameters of the NES to improve vibration suppression.The influence of the installation position,nonlinear stiffness,and damping parameters of the NES on vibration suppression was analyzed.Results showed that the optimized parameter combinations of the NES can effectively reduce wind-vortex-induced pipe vibration.The installation position of the NES had a significant effect on vibration suppression,and the midpoint of the pipe was the optimal NES installation position.An increase in stiffness or a 10% decrease in damping may cause vibration suppression failure.The results of this study provide some guidance for VIV suppression in deepwater jacket pipes.

Dynamic Analysis of A Deepwater Drilling Riser with A New Hang-off System

The safety of risers in hang-off states is a vital challenge in offshore oil and gas engineering.A new hang-off system installed on top of risers is proposed for improving the security of risers.This approach leads to a challenging problem:coupling the dynamics of risers with a new hang-off system combined with multiple structures and complex constraints.To accurately analyze the dynamic responses of the coupled system,a coupled dynamic model is established based on the Euler-Bernoulli beam-column theory and penalty function method.A comprehensive analysis method is proposed for coupled dynamic analysis by combining the finite element method and the Newmarkβmethod.An analysis program is also developed in MATLAB for dynamic simulation.The simulation results show that the dynamic performances of the risers at the top part are significantly improved by the new hang-off system,especially the novel design,which includes the centralizer and articulation joint.The bending moment and lateral deformation of the risers at the top part decrease,while the hang-off joint experiences a great bending moment at the bottom of the lateral restraint area which requires particular attention in design and application.The platform navigation speed range under the safety limits of risers expands with the new hang-off system in use.

Analysis of the world deepwater oil and gas exploration situation

The global trends in deepwater oil and gas exploration,characteristics of deepwater oil and gas discovery,and layout of deepwater oil and gas exploration business by seven major international oil companies are systematically analyzed using commercial databases(e.g.S&P Global and Rystad)and public information of oil companies.The deepwater area is currently the most important domain for global oil and gas exploration and discovery,with the most discoveries and reserves in passive continental margin basins.The deepwater discoveries have the greatest contribution to the total newly discovered oil and gas reserves in the sea areas,with an increasing number of lithological reservoirs discovered,and oil and gas discoveries mainly distributed in the Mesozoic–Cenozoic.The seven major international oil companies are widely active in various aspects of deepwater oil and gas exploration and development,and play a leading role.Based on years of theoretical understanding of global oil and gas geology and resource evaluation,it is proposed that favorable deepwater exploration areas in the future will mainly focus on three major areas:the Atlantic coast,the Indian Ocean periphery,and the Arctic Ocean periphery.Six suggestions are put forward for expanding overseas deepwater oil and gas exploration business:first,expand the sources for obtaining multi-user seismic data and improve the scientific selection of deepwater exploration areas;second,increase efforts to obtain deepwater exploration projects in key areas;third,adopt various methods to access into/exit from resource licenses flexibly;fourth,acquire licenses with large equity and operate in“dual-exploration”model;fifth,strengthen cooperation with leading international oil companies in deepwater technology;and sixth,improve business operation capabilities and gradually transform from“non-operators”to“operators”.

The application of three-dimensional seismic spectral decomposition and semblance attribute to characterizing the deepwater channel depositional elements in the Taranaki Basin of New Zealand

In the past few years, three-dimensional（3-D） seismogram has become an essential tool for the interpretation of subsurface stratigraphy and depositional systems. Seismic stratigraphy in conjunction with seismic geomorphology has elevated the degree to which seismic data can facilitate geological interpretation, especially in a deepwater environment. Technologies such as time slicing and interval attribute analysis can enhance geomorphological interpretations, and, when integrated with stratigraphic analyses, can yield insights regarding distribution of seal and reservoir facies. Multiple attributes corendering can further bring out features of geological interest that other technologies may overlook. This method involves corender spectral decomposition components（SDC） with semblance attributes to describe the distribution of deepwater channel elements and the boundaries of deepwater sinuous channel. Applying this technology to four elements is observed：（1） point-bars,（2） migration of channel meander loops,（3） channel erosion/cut, and（4） avulsion. The planview expression of the deepwater channel ranges from low sinuosity to high sinuosity. Furthermore, this technology has enabled interpreters to visualize details of complex depositional elements and can be used to predict net-to-gross ratio in channel systems, which can be incorporated into borehole planning for exploration as well as development needs to improve risk management significantly. The technology is applied to the study area in an effort to illustrate the variety of interpretation technologies available to the geoscientist.

Simulating the Effect of Hydrate Dissociation on Wellhead Stability During Oil and Gas Development in Deepwater

It is well known that methane hydrate has been identified as an alternative resource due to its massive reserves and clean property. However, hydrate dissociation during oil and gas development(OGD) process in deep water can affect the stability of subsea equipment and formation. Currently, there is a serious lack of studies over quantitative assessment on the effects of hydrate dissociation on wellhead stability. In order to solve this problem, ABAQUS finite element software was used to develop a model and to evaluate the behavior of wellhead caused by hydrate dissociation. The factors that affect the wellhead stability include dissociation range, depth of hydrate formation and mechanical properties of dissociated hydrate region. Based on these, series of simulations were carried out to determine the wellhead displacement. The results revealed that, continuous dissociation of hydrate in homogeneous and isotropic formations can causes the non-linear increment in vertical displacement of wellhead. The displacement of wellhead showed good agreement with the settlement of overlying formations under the same conditions. In addition, the shallower and thicker hydrate formation can aggravate the influence of hydrate dissociation on the wellhead stability. Further, it was observed that with the declining elastic modulus and Poisson's ratio, the wellhead displacement increases. Hence, these findings not only confirm the effect of hydrate dissociation on the wellhead stability, but also lend support to the actions, such as cooling the drilling fluid, which can reduce the hydrate dissociation range and further make deepwater operations safer and more efficient.

Sedimentary architecture models of deepwater turbidite channel systems in the Niger Delta continental slope,West Africa

This paper studied an architecture model of turbidite channel systems based on the shallow- layer high resolution 3D seismic information in the deepwater area in the Niger Delta continental slope, West Africa as a prototype model. Different types of channel systems were identified and the corresponding architecture models were established. The controlling factors, evaluation criteria and spatial distribution of different channel systems were analyzed. This study shows that turbidite channel systems of West Africa could be classified into three types; confined, semi-confined and unconfined, according to the condition of canyon and the levees on both sides. Oil one hand, along the transport direction, channel system evolves from confined to unconfined. Within channel systems, channel complexes, including two types of incised and enveloped, are the most important reservoir bodies. On the other hand, there is a channel complex evolution from incised to enveloped vertically. The geological factors exert impacts of different levels on the architecture of the turbidite channels in different sedimentary systems or even within the same system.

Status and challenges of Chinese deepwater oil and gas development

There have been nearly 33 oil and gas fields with billions bbl resources found in deepwater areas all over the world since 1970,so deepwater areas are of prime importance for petroleum exploration and development.With the achievements of a series of deepwater petroleum exploration technology projects in the USA,Europe and Brazil,the GOM,Brazil and West Africa are becoming the focus of deepwater oil and gas exploration.The oil productivity derived from deepwater areas exceeds that of shallow water areas in GOM and Brazil since 2001.Deepwater is becoming very important for petroleum industries and the top area of technology innovations.On the basis of analyses of world deepwater technological innovations,this paper briefly introduces the history of the China National Offshore Oil Corporation （CNOOC）,and then presents the status and challenges of Chinese deepwater oil and gas development.

An Overview of Deepwater Pipeline Laying Technology

The technology and methods involved in pipeline laying in shallow water have evolved to the level of routine and commonplace. However, regarding the unexpected deepwater complexity, the traditional pipeline laying techniques have to confront many new challenges arisen from the increase of the water depth, diameter of the pipe and the welding difficuhy, all of which should be modified and/or innovated based on the existed mature experiences. The purpose of this investigation is to outline the existing and new engineering laying techniques and the associated facilities, which can provide some significant information to the related research. In the context, the latest deepwater pipeline laying technology and pipe laying barges of the renowned companies from Switzerland, Norway, Italy etc., are introduced and the corresponding comparison and discussion are presented as well.

Geology and hydrocarbon accumulations in the deepwater of the northwestern South China Sea——with focus on natural gas

The deepwater of the northwestern South China Sea is located in the central to southern parts of the Qiongdongnan Basin （QDN Basin）, which is a key site for hydrocarbon exploration in recent years. In this study, the authors did a comprehensive analysis of gravity-magnetic data, extensive 3D seismic survey, cores and cuttings, paleontology and geochemical indexes, proposed the mechanism of natural gas origin, identified different oil and gas systems, and established the model of hydrocarbon accumulations in the deep-water region. Our basin tectonic simulation indicates that the evolution of QDN Basin was controlled by multiple-phased tectonic movements, such as Indochina-Eurasian Plate collision, Tibetan Uplift, Red River faulting and the expansion of the South China Sea which is characterized by Paleogene rifting, Neogene depression, and Eocene intensive faulting and lacustrine deposits. The drilling results show that this region is dominated by marine- terrestrial transitional and neritic-bathyal facies from the early Oligocene. The Yacheng Formation of the early Oligocene is rich in organic matter and a main gas-source rock. According to the geological-geochemical data from the latest drilling wells, Lingshui, Baodao, Changchang Sags have good hydrocarbon-generating potentials, where two plays from the Paleogene and Neogene reservoirs were developed. Those reservoirs occur in central canyon structural-lithologic trap zone, Changchang marginal trap zone and southern fault terrace of Baodao Sag. Among them, the central canyon trap zone has a great potential for exploration because the various reservoir- forming elements are well developed, i.e., good coal-measure source rocks, sufficient reservoirs from the Neogene turbidity sandstone and submarine fan, faults connecting source rock and reservoirs, effective vertical migration, late stage aggregation and favorable structural-lithological composite trapping. These study results provide an important scientific basis for hydrocarbon exploration in this region, evidenced by the recent discovery of the significant commercial LS-A gas field in the central canyon of the Lingshui Sag.

Nonlinear Dynamic Analysis of Deepwater Drilling Risers Subjected to Random Loads

Excited by ocean currents, random wave and vessel motion, deepwater drilling risers exhibit significant dynamic response. In time domain, a method is proposed to calculate the nonlinear dynmnic response of deepwater drilling risers subjected to random wave and dynamic large displacement vessel motion boundary condition. Structural and functional loads, external and intemal pressure, free surfaee effect of irregular wave, hydrodynamic forees induced by current and wave, as well as wave and low frequency （drift） motion of the drilling vessel are all accounted for. An example is presented which illustrates the application of the proposed method. The study shows that long term drift motion of the vessel has profound effect on the envelopes of bending stress and lateral displacement, as well as the range of lower flex joint angle of the deepwater riser. It can also be concluded that vessel motion is the principal dynamic loading of nonlinear dynamic response for the deepwater risers rather than wave force.

Seismic Facies in a Deepwater Area of a Marine Faulted Basin:Deepwater Area of the Paleogene Lingshui Formation in the Qiongdongnan Basin

In recent years, deep water areas have become popular exploration fields because of their abundant hydrocarbon resource potential. There are only relatively poor planar seismic profiles and no wells for deepwater areas of the Lingshui Formation in the Qiongdongnan Basin. A lot of faults developed and strata are fragmented due to high temperatures and high pressure, and this has resulted in dim sequence boundaries. Based on seismic data of the deepwater area and well data of bordering shallow water areas, Lingshui Formation was divided into four third class sequences; namely SI, SII, SIII and SIV, and the three-dimensional isochronous stratigraphic framework of the Lingshui Formation in the studied area was shaped. Based mainly on seismic attributes such as amplitude, continuity, internal structure and external shape, six typical seismic facies were identified, including mat-shaped, filling, wedge-shaped, foreset, moundy-shaped and lenticular-shaped, and a seismic facies distribution map was subsequently drawn. With studies on wells of bordering shallow water areas, regional sedimentary characteristics, and isopach map as references, sedimentary planar distribution features were analyzed. The deepwater area of the Lingshui Formation has mainly developed littoral and shallow sea. Sandstone bodies of fan delta, braided river delta, slope fan, basin floor fan, and turbidite fan are at an interdigitate junction to marine hydrocarbon source rocks and thus are favorable prospecting targets.

Petroleum Geology in Deepwater Settings in a Passive Continental Margin of a Marginal Sea:A Case Study from the South China Sea

Deepwater oil and gas exploration has become a global hotspot in recent years and the study of the deep waters of marginal seas is an important frontier research area.The South China Sea(SCS)is a typical marginal sea that includes Paleo SCS and New SCS tectonic cycles.The latter includes continental marginal rifting,intercontinental oceanic expansion and oceanic shrinking,which controlled the evolution of basins,and the generation,migration and accumulation of hydrocarbons in the deepwater basins on the continental margin of the northern SCS.In the Paleogene,the basins rifted along the margin of the continent and were filled mainly with sediments in marine-continental transitional environments.In the Neogene–Quaternary,due to thermal subsidence,neritic-abyssal facies sediments from the passive continental margin of the SCS mainly filled the basins.The source rocks include mainly Oligocene coal-bearing deltaic and marine mudstones,which were heated by multiple events with high geothermal temperature and terrestrial heat flow,resulting in the generation of gas and oil.The faults,diapirs and sandstones controlled the migration of hydrocarbons that accumulated principally in a large canyon channel,a continental deepwater fan,and a shelf-margin delta.

Deepwater Turbidite Lobe Deposits:A Review of the Research Frontiers

Deepwater/deep-marine turbidite lobes are the most distal part of a siliciclastic depositional system and hold the largest sediment accumulation on the seafloor. As many giant hydrocarbon provinces have been discovered within deepwater lobe deposits, they represent one of the most promising exploration targets for hydrocarbon industry. Deepwater exploration is characterized by high cost, high risk but insufficient data because of the deep/ultra–deepwater depth. A thorough understanding of the deepwater turbidite lobe architecture, hierarchy, stacking pattern and internal facies distribution is thus vital. Recently, detailed outcrop characterizations and high–resolution seismic studies have both revealed that the deepwater lobe deposits are characterized into four–fold hierarchical arrangements from ＂beds＂, to ＂lobe elements＂, to ＂lobes＂ and to ＂lobe complex＂. Quantitative compilations have shown that hierarchical components of lobe deposits have similar length to width ratios but different width to thickness ratios depending on different turbidite systems. At all hierarchical scales, sand–prone hierarchical lobe units are always separated by mud–prone bounding units except when the bounding units are eroded by their overlying lobe units thus giving rise to vertical amalgamation and connectivity. Amalgamations often occur at more proximal regions suggesting high flow energy. A mixed flow behavior may occur towards more distal regions, resulting in deposition of ＂hybrid event beds＂. These synthesized findings could（1） help understand the lobe reservoir distribution and compartmentalization therefore benefit the exploration and development of turbidite lobes within the deep marine basins（e.g. South China Sea） and（2） provide rules and quantitative constraints on reservoir modeling. In addition, the findings associated with deepwater turbidite lobes might be a good starting point to understand the sedimentology, architecture and hierarchy of turbidites in deep lacustrine environment.

Evolution of deepwater sedimentary environments and its implication for hydrocarbon exploration in Qiongdongnan Basin, northwestern South China Sea

Over the past several years, a number of hydrocarbon reservoirs have been discovered in the deepwater area of Qiongdongnan Basin, northwestern South China Sea. These oil/gas fields demonstrate that the evolution of the deepwater sedimentary environment are controlling the formation and distribution of large-scale clastic reservoirs. Integration between seismic and borehole data were necessary to best clarify the distribution and quality of these deepwater reservoirs. Geochemical and paleobiological evidence from discrete samples was also applied to document specific information regarding the sedimentary environment. Results show that the Qiongdongnan Basin has existed as a thriving marine environment since Oligocene, when several rifting depressions developed throughout the entire Qiongdongnan Basin. Triggered by the faults activities, several distinct provenances supplied the coarse sediments, transporting and depositing them in deep parts of the rifting depressions. A fan delta system then formed nearby the source in the deeper area of these rifting depressions. The sedimentary environment of Qiongdongnan gradiationally became deepwater since early Miocene. Consequently, abundances of sediments were transported from Hainan Island and Southern Uplift, and then sunk into the basin center. The submarine fans revealed by many boreholes in this area verified them as good reservoir. Because the area reached its lowest sea level at late Miocene and the Southern Uplift subsidenced under sea level, not providing any sediment, so that the carbonate mesa and biorhythms characteristic of this area also developed during this period. In the west part of Qiongdongnan Basin, sediments transported from Vietnam increased in response to the Tibetan Uplift. Consequently, a central canyon developed along the center of Qiongdongnan Basin, which has been confirmed by several boreholes as a favorable hydrocarbon reservoir. The clarification of the deepwater sedimentary environment’s evolution is potentially highly beneficial to future hydrocarbon exploration in the deepwater area of Qiongdongnan Basin.

Mechanical analysis of deepwater drilling riser system based on multibody system dynamics

A multibody system including a drilling riser system,tensioners and a floating platform is key equipment for offshore oil and gas drilling.Most of the previous studies only focus on the drilling riser system rather than the multibody system.Mechanical characteristics of the deepwater drilling riser system cannot be analyzed accurately in a simplified model.Therefore,a three-dimensional multibody analysis program is developed.The static and dynamic characteristics of the deepwater drilling riser system under different platform motions are analyzed based on the developed program.The results show that the static displacement of the riser system with tensioners is smaller than that without tensioners,which means the tensioners can suppress the deformation of the riser system.Under surge and sway motions of the platform,the dynamic displacement of the riser system with tensioners is also smaller than that without tensioners due to the tensioner suppression effect.Besides,the heave motion induces a uniform axial vibration of the riser system,while roll and pitch motions excite the riser system to vibrate laterally.Compared with the stress amplitude due to surge and sway motions,the stress amplitude of the riser system due to heave,roll and pitch motions is relatively small but cannot be neglected.

Model test investigation on an innovative lifting system for deepwater riser installation

An S-lay crane barge,named CNOOC 201,has been built for pipe laying in deepwater oil/gas fields in the South China Sea.It is due to be commissioned by the end of the year 2010.A special lifting system is developed to meet the challenge that installing deepwater risers from an S-lay barge is difficult and has not been achieved.The purpose of this paper was to investigate the model test on such an innovative system,which has to be done before field application.By applying the similarity theory,the movement of the S-lay barge is simulated through a six degrees-of-freedom motion platform,and a truncated model riser is utilized for the model testing.The displacement and force boundary conditions at the truncated position of the riser are obtained from the catenary governing equation and become realized by a slideway cart and a loading system designed to control the configuration of the model riser,which presents a similar configuration to a real riser in deepwater.The test results are in very good agreement with theoretical calculations,showing that the active truncated test is applicable for controlling the configuration of the deepwater riser in model testing investigation.

Multiaxial Fatigue Analyses of Stress Joints for Deepwater Steel Catenary Risers

In the present study, the dynamic and fatigue characteristics of two types of stress joints are investigated under ocean environmental condition. Connected with the riser and the platform, stress joint at the vessel hang-off position should be one of the main critical design challenges for a steel catenary riser （SCR） in deepwater. When the riser is under a high pressure and deepwater working condition, the stress state for the joint is more complex, and the fatigue damage is easy to occur at this position. Stress joint discussed in this paper includes two types： Tapered Stress Joint （TSJ） and Sleeved Stress Joint （SSJ）, and multiaxial fatigue analysis results are given for comparison. Global dynamic analysis for an SCR is performed first, and then the local boundary conditions obtained from the previous analysis are applied to the stress joint FE model for the later dynamic and multiaxial fatigue analysis. Results indicate that the stress level is far lower than the yield limit of material and the damage induced by fatigue needs more attention. Besides, the damage character of the two types of stress joints differs： for TSJ, the place where the stress joint connects with the riser is easy to occur fatigue damage; for SSJ, the most probable position is at the place where the end of the inner sleeve pipe contacts with the riser body. Compared with SSJ, TSJ shows a higher stress level but better fatigue performance, and it will have a higher material cost. In consideration of various factors, designers should choose the most suitable type and also geometric parameters.

An Installation System of Deepwater Risers by An S-Lay Vessel

Along with the consumption increase of the petroleum products, more countries have transferred their attentions to the offshore fields, especially the deepwater oil and gas reserves. For deepwater exploitation, the risers must be installed to act as the conduits connecting surface platforms to subsea facilities. In this paper, the typical risers sorted by different classes are introduced, and the correspondent installation methods are presented. By investigating the recent projects performed in the deepwater hot spots, and combining the challenges of HYSY20 l for riser installation, a lifting device developed for assisting riser installation is proposed and detailed to satisfy the installation of deepwater risers in the LW3-1 Gas Field of 1500 m in the South China Sea. Tests on both the functions and performances of such a new system exhibit the satisfaction of meeting all challenging requirements of HYSY201 for application to riser installation in waters up to a depth of 3000 m in the South China Sea.

A Singular Perturbation Method for Parametric Investigation on J-lay Installation of Deepwater Pipelines

The maximum bending moment or curvature in the neighborhood of the touch down point （TDP） and the maximum tension at the top are two key parameters to be controlled during deepwater J-lay installation in order to ensure the safety of the pipe-laying operation and the normal operation of the pipelines. In this paper, the non-linear governing differential equation for getting the two parameters during J-lay installation is proposed and solved by use of singular perturbation technique, from which the asymptotic expression of stiffened catenary is obtained and the theoretical expression of its static geometric configuration as well as axial tension and bending moment is derived. Finite element results are applied to verify this method. Parametric investigation is conducted to analyze the influences of the seabed slope, unit weight, flexural stiffness, water depth, and the pipe-laying tower angle on the maximum tension and moment of pipeline by this method, and the results show how to control the installation process by changing individual parameters.

Kinetics and model of gas generation of source rocks in the deepwater area, Qiongdongnan Basin

In order to investigate the hydrocarbon generation process and gas potentials of source rocks in deepwater area of the Qiongdongnan Basin, kinetic parameters of gas generation （activation energy distribution and frequency factor） of the Yacheng Formation source rocks （coal and neritic mudstones） was determined by thermal simulation experiments in the closed system and the specific KINETICS Software. The results show that the activation energy （Ea） distribution of C1–C5 generation ranges from 50 to 74 kcal/mol with a frequency factor of 2.4×1015 s–1 for the neritic mudstone and the Ea distribution of C1–C5 generation ranges from 49 to 73 kcal/mol with a frequency factor of 8.92×1013 s–1 for the coal. On the basis of these kinetic parameters and combined with the data of sedimentary burial and paleothermal histories, the gas generation model of the Yacheng Formation source rocks closer to geological condition was worked out, indicating its main gas generation stage at Ro （vitrinite reflectance） of 1.25%–2.8%. Meanwhile, the gas generation process of the source rocks of different structural locations （central part, southern slope and south low uplift） in the Lingshui Sag was simulated. Among them, the gas generation of the Yacheng Formation source rocks in the central part and the southern slope of the sag entered the main gas window at 10 and 5 Ma respectively and the peak gas generation in the southern slope occurred at 3 Ma. The very late peak gas generation and the relatively large gas potential indices （GPI：20×10^8–60×10^8 m^3/km^2） would provide favorable conditions for the accumulation of large natural gas reserves in the deepwater area.