A 2856-MHz,π-mode,seven-cell standingwave deflecting cavity was designed and fabricated for bunch length measurement in Tsinghua Thomson scattering X-ray source(TTX)facility.This cavity was installed in the TTX and p...A 2856-MHz,π-mode,seven-cell standingwave deflecting cavity was designed and fabricated for bunch length measurement in Tsinghua Thomson scattering X-ray source(TTX)facility.This cavity was installed in the TTX and provided a deflecting voltage of 4.2 MV with an input power of 2.5 MW.Bunch length diagnoses of electron beams with energies up to 39 MeV have been performed.In this article,the RF design of the cavity using HFSS,fabrication,and RF test processes are reviewed.High-power operation with accelerated beams and calibration of the deflecting voltage are also presented.展开更多
RF deflecting cavity can be used for bunch length measurement and is designed to diagnose the beam produced by the photocathode electron gun which was built at Tsinghua University for the Thomson scattering experiment...RF deflecting cavity can be used for bunch length measurement and is designed to diagnose the beam produced by the photocathode electron gun which was built at Tsinghua University for the Thomson scattering experiment. Detailed discussion and calculation for measuring the 3.5 MeV bunch and another with further acceleration to 50 MeV, which is under development, are presented. A standing-wave deflecting cavity working at 2856 MHz is designed and the power feeding system has been planned.展开更多
Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes （LOM） and higher order modes （HOM） in the cavity shou...Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes （LOM） and higher order modes （HOM） in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.展开更多
We propose and analyze a scheme to produce comb bunches, i.e. a bunch consisting of micro-bunch trains, with tunable subpicosecond spacing. In the scheme, the electron beam is first deflected by a deflecting cavity wh...We propose and analyze a scheme to produce comb bunches, i.e. a bunch consisting of micro-bunch trains, with tunable subpicosecond spacing. In the scheme, the electron beam is first deflected by a deflecting cavity which introduces a longitudinal-dependent linear transverse kick to the particles. After passing through a drift space, the transverse beam size is linearly coupled to the longitudinal position of the particle inside the beam, and a mask is placed there to tailor the beam, then the mask distribution is imprinted on the beam＇s longitudinal distribution. A quadrupole magnet and another deflecting cavity are used in the beam line to compensate the transverse angle due to the first deflecting cavity. Analysis shows that the number, length, and spacing of the trains can be controlled through the parameters of the deflecting cavity and the mask. Such electron bunch trains can be applied to an infrared free electron laser, a plasma-wakefield accelerator and a supper-radiance THz source.展开更多
基金This work was supported by the National Natural Science Foundation of China(No.11922504).
文摘A 2856-MHz,π-mode,seven-cell standingwave deflecting cavity was designed and fabricated for bunch length measurement in Tsinghua Thomson scattering X-ray source(TTX)facility.This cavity was installed in the TTX and provided a deflecting voltage of 4.2 MV with an input power of 2.5 MW.Bunch length diagnoses of electron beams with energies up to 39 MeV have been performed.In this article,the RF design of the cavity using HFSS,fabrication,and RF test processes are reviewed.High-power operation with accelerated beams and calibration of the deflecting voltage are also presented.
基金National Natural Science Foundation of China (10775080)
文摘RF deflecting cavity can be used for bunch length measurement and is designed to diagnose the beam produced by the photocathode electron gun which was built at Tsinghua University for the Thomson scattering experiment. Detailed discussion and calculation for measuring the 3.5 MeV bunch and another with further acceleration to 50 MeV, which is under development, are presented. A standing-wave deflecting cavity working at 2856 MHz is designed and the power feeding system has been planned.
文摘Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes （LOM） and higher order modes （HOM） in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.
基金Supported by National Natural Science Foundation of China (NSFC) (10735050, 10805031)National Basic Research Program of China (973 Program) (2007CB815102)
文摘We propose and analyze a scheme to produce comb bunches, i.e. a bunch consisting of micro-bunch trains, with tunable subpicosecond spacing. In the scheme, the electron beam is first deflected by a deflecting cavity which introduces a longitudinal-dependent linear transverse kick to the particles. After passing through a drift space, the transverse beam size is linearly coupled to the longitudinal position of the particle inside the beam, and a mask is placed there to tailor the beam, then the mask distribution is imprinted on the beam＇s longitudinal distribution. A quadrupole magnet and another deflecting cavity are used in the beam line to compensate the transverse angle due to the first deflecting cavity. Analysis shows that the number, length, and spacing of the trains can be controlled through the parameters of the deflecting cavity and the mask. Such electron bunch trains can be applied to an infrared free electron laser, a plasma-wakefield accelerator and a supper-radiance THz source.
