Impact of multifocal gas-permeable lens designs on short-term choroidal response, axial length, and retinal defocus profile

AIM:To investigate the impact of multifocal gas permeable contact lens(MFGPCL)in various add power and distance/near area allocation on short-term changes of choroidal thickness(ChT),axial length(AL),and retinal defocus profile in young adults.METHODS:Seventeen young adults(2 males and 15 females;age 23.17±4.48y)were randomly assigned to wear two designs binocularly with a one-week washout period in between.Total of four MFGPCL designs were assessed.All designs were distance-center that varied in two add power(+1.50 and 3.00 D)and/or two distance zone(DZ)diameters(1.50 and 3.00 mm;design A:DZ 1.5/add 3.0,B:DZ 1.5/add 1.5,C:DZ 3.0/add 3.0,D:DZ 3.0/add 1.5).ChT,AL,and peripheral refraction data were collected on each subject at baseline,on days 1 and 7 of MFGPCL daily wear.ChT was assessed in four quadrants using a spectraldomain optical coherence tomography.RESULTS:AL was shortened by-26±44μm with lens C,-18±27μm with lens D,-13±29μm with lens A,and-8±30μm with lens B(all P<0.05).A significant overall increase in ChT was observed with all 4 designs(lens A:+6±6μm,B:+3±7μm,C:+8±7μm,and D:+8±7μm).Temporal and superior choroid exhibited more choroidal thickening associated with MFGPCL.All designs induced significant relative peripheral myopia(RPM)beyond the central 20o across the horizontal meridian in both nasal and temporal fields(P<0.05).CONCLUSION:MFGPCLs show a significant influence on ChT and AL,which are associated with significant increase in RPM after short-term wear.The reliability and feasibility of quantifying short-term changes in ChT support its use as a promising marker for the long-term efficacy of myopia-controlling treatments.

Riemann–Hilbert problem for the defocusing Lakshmanan–Porsezian–Daniel equation with fully asymmetric nonzero boundary conditions

The Riemann–Hilbert approach is demonstrated to investigate the defocusing Lakshmanan–Porsezian–Daniel equation under fully asymmetric nonzero boundary conditions.In contrast to the symmetry case,this paper focuses on the branch points related to the scattering problem rather than using the Riemann surfaces.For the direct problem,we analyze the Jost solution of lax pairs and some properties of scattering matrix,including two kinds of symmetries.The inverse problem at branch points can be presented,corresponding to the associated Riemann–Hilbert.Moreover,we investigate the time evolution problem and estimate the value of solving the solutions by Jost function.For the inverse problem,we construct it as a Riemann–Hilbert problem and formulate the reconstruction formula for the defocusing Lakshmanan–Porsezian–Daniel equation.The solutions of the Riemann–Hilbert problem can be constructed by estimating the solutions.Finally,we work out the solutions under fully asymmetric nonzero boundary conditions precisely via utilizing the Sokhotski–Plemelj formula and the square of the negative column transformation with the assistance of Riemann surfaces.These results are valuable for understanding physical phenomena and developing further applications of optical problems.

Image defocus deblurring method based on gradient difference of boundary neighborhood

Background For static scenes with multiple depth layers,existing defocused image deblurring methods have the problems of edge-ringing artifacts or insufficient deblurring owing to inaccurate estimation of the blur amount,and prior knowledge in nonblind deconvolution is not strong,which leads to image detail recovery challenges.Methods To this end,this study proposes a blur map estimation method for defocused images based on the gradient difference of the boundary neighborhood,which uses the gradient difference of the boundary neighborhood to accurately obtain the amount of blurring,thereby preventing boundary ringing artifacts.The obtained blur map is then used for blur detection to determine whether the image needs to be deblurred,thereby improving the efficiency of deblurring without manual intervention and judgment.Finally,a nonblind deconvolution algorithm was designed to achieve image deblurring based on the blur amount selection strategy and sparse prior.Results Experimental results showed that our method improves PSNR(Peak Signal-to-Noise Ratio)and SSIM(Structural Similarity Index)by an average of 4.6%and 7.3%,respectively,compared to existing methods.Conclusions Experimental results showed that the proposed method outperforms existing methods.Compared to existing methods,our method can better solve the problems of boundary ringing artifacts and detail information preservation in defocused image deblurring.

A spawning particle filter for defocused moving target detection in GNSS-based passive radar

Global Navigation Satellite System(GNSS)-based passive radar(GBPR)has been widely used in remote sensing applications.However,for moving target detection(MTD),the quadratic phase error(QPE)introduced by the non-cooperative target motion is usually difficult to be compensated,as the low power level of the GBPR echo signal renders the estimation of the Doppler rate less effective.Consequently,the moving target in GBPR image is usually defocused,which aggravates the difficulty of target detection even further.In this paper,a spawning particle filter(SPF)is proposed for defocused MTD.Firstly,the measurement model and the likelihood ratio function(LRF)of the defocused point-like target image are deduced.Then,a spawning particle set is generated for subsequent target detection,with reference to traditional particles in particle filter(PF)as their parent.After that,based on the PF estimator,the SPF algorithm and its sequential Monte Carlo(SMC)implementation are proposed with a novel amplitude estimation method to decrease the target state dimension.Finally,the effectiveness of the proposed SPF is demonstrated by numerical simulations and pre-liminary experimental results,showing that the target range and Doppler can be estimated accurately.

激光功率和离焦量对2000 MPa级热成形钢激光焊接接头组织与性能影响

目的研究激光功率和离焦量对PHS2000型热成形钢激光焊接接头焊缝区及热影响区显微组织、拉伸特性和硬度分布的影响。方法采用光学显微镜(OM)、扫描电子显微镜(SEM)分析焊接接头的显微结构;利用拉伸实验和显微硬度实验探究焊接接头力学性能的变化规律。结果随着激光功率从3500 W增至4700 W,焊缝区与热影响区平均晶粒尺寸总体呈上升趋势,抗拉强度先上升后下降,焊缝区平均显微硬度值在635HV~651HV内浮动,热影响区平均显微硬度值在434HV~451HV内浮动;离焦量对焊缝区的组织分布有显著影响,不同离焦量下的组织分布均较为分散,热影响区的晶粒尺寸在离焦量为−3 mm时达到最大,为10.67μm。在不同激光功率和离焦量下,焊接接头的显微硬度值存在上下浮动,焊接接头各区的显微硬度分布规律基本一致,以焊缝为中心,两侧趋于对称分布。硬度分布规律如下:焊缝区硬度>母材区硬度>热影响区硬度。结论在本实验条件下,与离焦量相比,激光功率对焊接接头显微组织及拉伸强度的影响更大。在焊接速度为150 mm/min条件下,设置激光功率为4100 W、离焦量为−2 mm,此时抗拉强度最大,为1715 MPa,达到母材抗拉强度的85%。

多波环形激光器密封钉焊接工艺优化

随着新能源汽车行业的发展,对动力电池焊接质量提出了更高要求。为解决铝合金电池密封钉采用传统激光焊接时出现的裂纹、气孔等缺陷问题,并提高生产效率,采用自主研发的多波环形光斑光纤激光器对2 mm厚的3003铝合金盖板和0.95 mm厚的密封钉进行焊接,研究了在一定焊接速度下内外环焊接功率、离焦量等主要工艺参数对焊缝成形的影响。试验结果表明,在40 mm/s焊接速度下,光纤(内环)功率500 W,半导体(外环)功率1 700 W,离焦量1.5 mm时,焊缝熔深达0.6 mm,熔宽1.2 mm,此时焊接效果最优,焊缝各位置熔深一致性高,焊接飞溅极小且无炸点、气孔、裂纹等缺陷。通过样品焊接试验,验证了该焊接工艺的稳定性和可靠性。

Expressions of type I collagen, α2 integrin and β1 integrin in sclera of guinea pig with defocus myopia and inhibitory effects of bFGF on the formation of myopia

AIM:To investigate the expressions of type I collagen, α2 integrin and β1 integrin in the posterior sclera of guinea pigs with defocus myopia and whether basic fibroblast growth factor (bFGF) injection inhibits the formation and development of myopia by upregulating the expression of type I collagen, α2 integrin and β1 integrin. METHODS:After 14 days of treatment, the refractive state and axial length were measured and the levels of type I collagen, α2 integrin and β1 integrin were assayed in the posterior sclerae of groups of guinea pigs that wore a monocular-7D polymethylmethacrylate (PMMA) lens or had -7D lens wear followed by the peribulbar injection of Phosphate Buffer Solution (PBS) or bFGF. The untreated fellow eye served as a control. Guinea pigs with no treatment served as normal group. ·RESULTS:The results showed that 14 days of monocular defocus increased axial eye length and refraction, while bFGF delivery inhibited them markedly. Further, it was also found that the monocular-7D lens could decrease the levels of type I collagen, α2 integrin and β1 integrin expressions, while, unlike PBS, bFGF increased them significantly in comparison to contralateral control eyes and normal eyes. CONCLUSION:bFGF can prevent the formation anddevelopment of defocus myopia by upregulating the expressions of type I collagen, α2 integrin and β1 integrin. Taken together, our results demonstrate that bFGF promotes sclera remodeling to prevent myopia in guinea pigs.

Parameter Estimation for Blur Image Combining Defocus and Motion Blur using Cepstrum Analysis

The degraded parameters recognition is very important for the restoration of blurred images. There are two common types of blurs for most camera systems. One is the defocus blur due to the optical system's defocus phenomenon and the other is the motion blur due to the relative movement between the objectives and the camera. Compared with the recognition for the blurred image with only one blur model, the parameter estimation for the picture combining defocus and motion blur models is a more complicated mission. A method was proposed for computer to estimate the parameters of defocus blur and motion blur in cepstrum area simultaneously. According to characters of both blur models in the frequency domain, an adjustment approach was suggested in the frequency area and then convert to the cepstrum field to increase the accuracy of measurement.

Effects of Defocus Distance on Three-Beam Laser Internal Coaxial Wire Cladding

Three-beam laser internal coaxial wire feeding cladding is regarded as a promising additive manufacturing technique because it is highly efficient and controllable.In this study,the effects of the defocus distance on cladding using a three-beam laser with internal wire feeding are experimentally and numerically studied.A process map indicating the surface characteristics at different defocus distances with various parameter combinations was developed.The transmission characteristics including laser intensity,beam size,and laser spot distance of the three-beam laser at different defocus distances were analyzed using TracePro software.Based on the TracePro results as heat source,a three-dimensional transient finite element(FE)thermal model was formulated to predict the thermal field,temperature history and molten pool shape at different defocus distances.A molten pool with a flat bottom and low melting depth is generated when the defocus distance is−2.5 mm,whereas when this distance is−1.5 mm,a pool with a valley-shaped bond and high melting depth is formed.The simulated results of the temperature cycle and clad geometry are both validated and found to well agree with experimental measurements.The influence of the defocus distance on the microstructure and microhardness are discussed based on the temperature history and cooling rate.With the increase in the absolute defocus distance,the height and dilution of the clad decreased,whereas the width increased.In addition,the effects of defocus distance with various parameter combinations on clad geometry were explored using the formulated FE model.

BaMBNet:A Blur-Aware Multi-Branch Network for Dual-Pixel Defocus Deblurring

Reducing the defocus blur that arises from the finite aperture size and short exposure time is an essential problem in computational photography.It is very challenging because the blur kernel is spatially varying and difficult to estimate by traditional methods.Due to its great breakthrough in low-level tasks,convolutional neural networks(CNNs)have been introdu-ced to the defocus deblurring problem and achieved significant progress.However,previous methods apply the same learned kernel for different regions of the defocus blurred images,thus it is difficult to handle nonuniform blurred images.To this end,this study designs a novel blur-aware multi-branch network(Ba-MBNet),in which different regions are treated differentially.In particular,we estimate the blur amounts of different regions by the internal geometric constraint of the dual-pixel(DP)data,which measures the defocus disparity between the left and right views.Based on the assumption that different image regions with different blur amounts have different deblurring difficulties,we leverage different networks with different capacities to treat different image regions.Moreover,we introduce a meta-learning defocus mask generation algorithm to assign each pixel to a proper branch.In this way,we can expect to maintain the information of the clear regions well while recovering the missing details of the blurred regions.Both quantitative and qualitative experiments demonstrate that our BaMBNet outperforms the state-of-the-art(SOTA)methods.For the dual-pixel defocus deblurring(DPD)-blur dataset,the proposed BaMBNet achieves 1.20 dB gain over the previous SOTA method in term of peak signal-to-noise ratio(PSNR)and reduces learnable parameters by 85%.The details of the code and dataset are available at https://github.com/junjun-jiang/BaMBNet.

Effectiveness of peripheral defocus spectacle lenses in myopia control: a Meta-analysis and systematic review

AIM: To evaluate the effectiveness of peripheral defocus spectacle lenses(PDLs) in myopia control. METHODS: Literature retrieval on Pub Med, Cochrane Library, Embase, and Web of Science databases, and the search time limit was from the establishment of each database to December 29, 2021 were conducted. Change of spherical equivalent refraction(SER) and axial change(AL) were extracted from the literatures that met the inclusion criteria, and Rev Man5.3 software was used for Meta-analysis. RESULTS: A total of 4 randomized controlled trials(RCTs) were included in this Meta-analysis, involving 770 myopic children. The results showed that PDLs could delay the progression of myopia in children with myopia compared with single vision spectacle lenses(SVLs;WMD=0.21 D, 95%CI: 0.01, 0.41, P=0.04). However, there was no significant difference in controlling the growth of axial length(AL) in myopic children(WMD=-0.10 mm, 95%CI:-0.21, 0.01, P=0.07). The results of the effectiveness of myopia control between the two spectacle lenses showed that PDLs were more effective in controlling the progression of myopia(OR=5.73, 95%CI: 2.58, 12.70, P<0.001) and delaying the growth of AL(OR=44.25, 95%CI: 8.84, 221.58, P<0.001) than SVLs, and the differences were statistically significant. CONCLUSION: PDLs can control the progression of myopia compared with SVLs, but cannot delay the growth of AL, and the effectiveness of PDLs in myopia control better than SVLs.

Defocus Blur Segmentation Using Local Binary Patterns with Adaptive Threshold

Enormousmethods have been proposed for the detection and segmentation of blur and non-blur regions of the images.Due to the limited available information about blur type,scenario and the level of blurriness,detection and segmentation is a challenging task.Hence,the performance of the blur measure operator is an essential factor and needs improvement to attain perfection.In this paper,we propose an effective blur measure based on local binary pattern(LBP)with adaptive threshold for blur detection.The sharpness metric developed based on LBP used a fixed threshold irrespective of the type and level of blur,that may not be suitable for images with variations in imaging conditions,blur amount and type.Contrarily,the proposed measure uses an adaptive threshold for each input image based on the image and blur properties to generate improved sharpness metric.The adaptive threshold is computed based on the model learned through support vector machine(SVM).The performance of the proposed method is evaluated using two different datasets and is compared with five state-of-the-art methods.Comparative analysis reveals that the proposed method performs significantly better qualitatively and quantitatively against all of the compared methods.

Defocusing role in femtosecond filamentation: Higher-order Kerr effect or plasma effect?

The femtosecond filamentation in the classical and high-order Kerr （HOK） models is numerically investigated by adopting multi-photon ionization （MPI） cross section with different values. It is found that in the case that the MPI cross section is relatively small, there exists a big difference between the electron density as well as clamped intensity calculated in the classical model and those calculated in the HOK one, while in the case that the MPI cross section is relatively large, the electron density and clamped intensity calculated in the two models are nearly in agreement with each other, and under this circumstance, even if the higher-order nonlinear terms do exist, the free-charge generation and the associated defocusing in a filament are enough to mask their effects. The different behaviors of the maximum intensity and on-axis electron density at the collapse position with the pulse duration provides an approach to determine which effect plays the dominant defocusing role. These results demonstrate that it is ionization that results in the difference between the two models.

Blurred Defocused Image Restoration Based on FRFT

A technique for restoring the blurred image resulted from defocusing of the lens is proposed in this paper, which is based on fractional Fourier transform （FRFT）.The FRFT, as a powerful tool for the analysis of time-varying signals, is closely connected with the optical imaging system. FRFT also can describe optical imaging process just like Fresnel diffractions, so a defocused imaging model based on FRFT is established to explain the blur phenomena of defocusing image. The defocused imaging model is greatly different from the traditional point spread function （PSF） model, and enables to uncover the blur nature of non-focus image. Then, an image restoration method using the novel model is proposed to handle the blurred defocused image. The method adopted a new iterative phase retrieval approach which can approximately estimate phase signals from intensity signals of a single defocused image by means of FRFT. Restoring image may acquire sharp image by implementing inverse FRFT on complex image signal made from the estimated phase signals and intensity signals. Experimental results demonstrate that the method is effective in restoring blurred defocused image.

Effect of Thermal Defocusing on Backward Stimulated Raman Scattering in CH4

The conversion efficiency of stimulated Raman scattering （SRS） in CH4 is studied by using a single longitudinal mode second-harmonic Nd：YAG laser （532 nm, linewidth 0.003 cm^-1, pulse-width （FWHM） 6.5 ns）. Due to the heat release from vibrationally excited particles, SRS processes often suffer from the thermal defocusing effect （TDE）. In view of 6.5 ns laser pulse width is much shorter than the vibrational relaxation time of CH4 molecules, TDE can only affect the SRS processes afterwards. In the cases of low laser repetition, TDE will be not serious, because it will be removed by the thermal diffusion in Raman medium before the next pulse arrives. At the laser repetition rate 2 Hz, CH4 pressure 1.1 MPa and pump laser energy 95 mJ, the quantum conversion efficiency of backward first-Stokes （BS1） has attained 73%. This represents the highest first-stokes conversion efficiency in CH4. Furthermore, due to the relaxation oscillation, the BS1 pulses are narrowed to about 1.2 ns. As a result, the BS1 peak power turns out to be 2.7 times that of the pump. Its beam quality is also much better and is only slightly affected by TDE. This reason is that BS1 represents a wave-front-reversed replica of the pump beam, which can compensate the thermal distortions in Raman amplify process. Under the same conditions, but pump laser repetition rate as 10 Hz, the conversion efficiency of BS1 goes down to 36% due to TDE. From this study, we expect that a well-behaved 630 nm Raman laser may be designed by using a closed CH4/He circulating-cooling system, which may have some important applications.

Parameter recognition for defocus blur image using cepstrum analysis

Successful restoration of blurred images depends primarily on the knowledge about the degradationparameter.Defocus blur model in the frequency domain is characterized by concentric rings and the blurradius of the point spread function(PSF)can be identified conveniently in the frequency field for peopleby manual means rather than for computer.This paper introduces a practical method for computer to esti-mate the defocus blur parameter in cepstrum area.Fourier transform plays an intermediate role in the pathto cepstrum domain.We suggest a weighted adjustment operation in the frequency domain and then con-vert it to the cepstrum field to increase the accuracy of recognition.

An Analytical Solution for Nearshore Circulation Driven by Focused/Defocused Waves

An offshore shoal or bar refracts ocean surface waves and causes wave focusing/defocusing on the adjacent beach. Wave focal patterns characterized by alongshore variations in wave height, wave angle, and breaking location induce alongshore non-uniformities of wave setup and nearshore circulation, e.g., rip currents and alongshore currents, in the surfzone. A simplified analytic model for nearshore circulation generated by focused/defocused waves on a planar beach is developed and theoretical solutions are obtained using transport stream function and perturbations in alongshore distributions of wave height and wave angle at the breaker line. The analytic model suggests that alongshore currents are strongly affected by a pair of counter-rotating vortices generated shoreward of the wave focal zone. The vortices are persistent, and their strengths depend on the amplitudes of alongshore variations in wave height and wave angle. The alongshore gradient in wave height tends to intensify the vortices while the convergence of wave angle tends to weaken the vortices. Divergent flows associated with the vortices in the surfzone are intense, strengthening alongshore currents in the downstream of the wave focal zone and weakening alongshore currents or causing flows reversal in the upstream. Alongshore currents are modulated by rip currents associated with the wave focusing/defocusing patterns.

ALMOST CONSERVATION LAWS AND GLOBAL ROUGH SOLUTIONS OF THE DEFOCUSING NONLINEAR WAVE EQUATION ON R^2

In this article, we investigate the initial value problem（IVP） associated with the defocusing nonlinear wave equation on R^2 as follows：{δttu-△u=-u^3 u（0,x）=u0（x）,δtu＊（0,x）=u1（x,）where the initial data （uo,ul）∈H^s-1（R^2）It is shown that the IVP is global well-posedness in H^s（R^2）×H^s-1×H^s-1（R^2）for any 1 〉 s 〉2/5.The proof relies upon the almost conserved quantity in using multilinear correction term. The main difficulty is to control the growth of the variation of the almost conserved quantity. Finally, we utilize linear-nonlinear decomposition benefited from the ideas of Roy [1].

Above-average defocus curves in photopic and mesopic vision with multifocal intraocular lenses after laser assisted in situ keratomileusis

I am Dr. David P Pifiero from the Department of Optics, Pharmacology and Anatomy of the University of Alicante and from the Department of Ophthalmology of Vithas Medimar （Oftalmar） and Vithas Virgen del Carmen （Qvision） hospitals in Spain.

An Integrable Decomposition of Defocusing Nonlinear Schr(o|¨)dinger Equation

The method of nonlinearization of spectral problems is developed to the defocusing nonlinear Schr(o|¨)dingerequation.As an application,an integrable decomposition of the defocusing nonlinear Schr(o|¨)dinger equation is presented.