The diesel particulate matter(DPM) emission from diesel powered equipment in underground mines can cause health hazards including cancer to the miners. The understanding of the DPM propagation pattern under realistic ...The diesel particulate matter(DPM) emission from diesel powered equipment in underground mines can cause health hazards including cancer to the miners. The understanding of the DPM propagation pattern under realistic mining condition is required for selecting proper DPM control strategies and to improve working practices in underground mines. In this paper, three dimensional simulations of DPM emission from the exhaust tail pipe of a load-haul-dump(LHD) vehicle and its subsequent distribution inside an isolated zone in the typical underground mine are carried out using two different solution models available in Ansys Fluent. The incoming fresh air into the isolated zone is treated as a continuous phase and DPM is treated either as a continuous phase(gas) or as a secondary discrete phase(particle). Species transport model is used when DPM is treated as gas and discrete phase model is used when DPM is assumed to behave like a particle. The distributions of DPM concentration inside the isolated zone obtained from each method are presented and compared. From the comparison results, an accurate and economical solution technique for DPM evaluation can be selected.展开更多
The single crystal blade is one of the key technologies for improving the performance, durability and reliability of aero-engines and ground gas-turbine engines. However, the anisotropic mechanical properties of the s...The single crystal blade is one of the key technologies for improving the performance, durability and reliability of aero-engines and ground gas-turbine engines. However, the anisotropic mechanical properties of the single crystal material makes a great deal of difficulties on the development and the application of the single crystal blade, which is a challenge for the engineering application of the single crystal superalloy and the theoretic bases of the application. Some researches on the strength analysis and the life prediction of the anisotropic single crystal blade were carried out by the authors' research team. They are as follows. The crystallographic constitutive models for the plastic and the creep behaviors and the method of the rupture life prediction were established and verified. The tensile or the creep experiments for DD3 single crystal alloy with different orientations under different temperatures and different tensile rates or under different temperatures and different stress levels were carried out. The experimental data and the anisotropic properties at intermediate and high temperatures revealed by the experiments are significant for the application of the single crystal alloy. In addition, the experimental research for a kind of single crystal blade was also made. As the application of the researches the strength analysis and the life prediction were carried out for the single crystal blade of a certain aero-engine. In this part, the constitutive models and their applications are described, and the experimental research work will be described in part II.展开更多
A new scheme for femur shape recovery from volumetric images using deformable models was proposed. First, prior 3 D deformable femur models are created as templates using point distribution models technology. Second, ...A new scheme for femur shape recovery from volumetric images using deformable models was proposed. First, prior 3 D deformable femur models are created as templates using point distribution models technology. Second, active contour models are employed to segment the magnetic resonance imaging (MRI) volumetric images of the tibial and femoral joints and the deformable models are initialized based on the segmentation results. Finally, the objective function is minimized to give the optimal results constraining the surface of shapes.展开更多
An adaptive object tracking algorithm based on particle filtering and a modified Gradient Vector Flow (GVF) Snake is proposed for tracking moving and deforming objects. The original contours of objects are obtained by...An adaptive object tracking algorithm based on particle filtering and a modified Gradient Vector Flow (GVF) Snake is proposed for tracking moving and deforming objects. The original contours of objects are obtained by using the background differencing method,and the true contours of objects can be converged by means of the powerful searching ability of a modified GVF-Snake. Finally,an Energetic Particle Filtering (EPF) algorithm is obtained by combining particle filtering and a modified GVF-Snake,and by using K-means and the EPF algorithm,multiple objects can be tracked. The proposed tracking tactic for partially occluded objects can effectively improve its anti-occlusion ability. Experiments show that this algorithm can obtain better tracking effect even though the tracked object is occluded.展开更多
为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿...为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿真结果,并研究模型转换直径与破碎模型对横向射流雾化过程仿真结果的影响。仿真结果表明:相比DPM,VOF-DPM仿真得到的射流穿透深度更接近试验结果,射流雾化过程更真实,并且能够捕捉到更详细的流场信息;当模型转换直径较小时,不能转换为离散相颗粒的液滴相对较多,这些液滴仍由VOF求解,并阻挡气流导致在其周围产生小涡团;添加破碎模型对射流穿透深度和流场结构几乎没有影响,但导致离散相颗粒继续破碎成更多更小的颗粒。展开更多
本文利用DPM(Dust Production Model)模型模拟计算了我国北方沙漠地区不同的土壤微团粒在不同的地表粗糙度和地表摩擦风速下的水平跃移通量、粉尘释放通量、粉尘释放效率以及在特定量中粉尘粒子的质量和数浓度的分布,并对上述计算结果...本文利用DPM(Dust Production Model)模型模拟计算了我国北方沙漠地区不同的土壤微团粒在不同的地表粗糙度和地表摩擦风速下的水平跃移通量、粉尘释放通量、粉尘释放效率以及在特定量中粉尘粒子的质量和数浓度的分布,并对上述计算结果进行了讨论和分析。通过与实际观测结果进行对比的粗糙度和地表摩擦风速下粉尘释放通量后发现二者基本一致,从而证明了DPM模型是可以用来初步模拟中国北方沙漠地区的粉尘释放过程,这将有利于进一步较准确得模拟沙尘的输送、沉降以及气候效应。展开更多
针对行人检测系统中存在的难以同时具有较高的检测率和较快的检测速度这一问题,本文提出了一种自适应Coarse-to-Fine Deformable Part Model(CtF DPM)的行人检测模型.首先,将低分辨率根滤波器特征提取得分与阈值进行比较,以确定高分辨...针对行人检测系统中存在的难以同时具有较高的检测率和较快的检测速度这一问题,本文提出了一种自适应Coarse-to-Fine Deformable Part Model(CtF DPM)的行人检测模型.首先,将低分辨率根滤波器特征提取得分与阈值进行比较,以确定高分辨率部件滤波器的特征提取区域;随后,在同分辨率层中引入同级约束关系,增强同层的特征相关性;最后,将该特征提取与其他多种算法在INRIA数据库中进行检测准确性测试,并与隐式支持向量机(LSVM)结合进行实际道路环境测试.理论性能和实际测试结果表明:基于自适应CtF DPM的行人检测模型在保证检测性能的同时,特征提取时间可降至十几毫秒,显著提高了检测速度.展开更多
基金financial support provided by the Western US Mining Safety and Health Training&Translation Center by the National Institute for Occupational Safety and Health(NIOSH)
文摘The diesel particulate matter(DPM) emission from diesel powered equipment in underground mines can cause health hazards including cancer to the miners. The understanding of the DPM propagation pattern under realistic mining condition is required for selecting proper DPM control strategies and to improve working practices in underground mines. In this paper, three dimensional simulations of DPM emission from the exhaust tail pipe of a load-haul-dump(LHD) vehicle and its subsequent distribution inside an isolated zone in the typical underground mine are carried out using two different solution models available in Ansys Fluent. The incoming fresh air into the isolated zone is treated as a continuous phase and DPM is treated either as a continuous phase(gas) or as a secondary discrete phase(particle). Species transport model is used when DPM is treated as gas and discrete phase model is used when DPM is assumed to behave like a particle. The distributions of DPM concentration inside the isolated zone obtained from each method are presented and compared. From the comparison results, an accurate and economical solution technique for DPM evaluation can be selected.
文摘The single crystal blade is one of the key technologies for improving the performance, durability and reliability of aero-engines and ground gas-turbine engines. However, the anisotropic mechanical properties of the single crystal material makes a great deal of difficulties on the development and the application of the single crystal blade, which is a challenge for the engineering application of the single crystal superalloy and the theoretic bases of the application. Some researches on the strength analysis and the life prediction of the anisotropic single crystal blade were carried out by the authors' research team. They are as follows. The crystallographic constitutive models for the plastic and the creep behaviors and the method of the rupture life prediction were established and verified. The tensile or the creep experiments for DD3 single crystal alloy with different orientations under different temperatures and different tensile rates or under different temperatures and different stress levels were carried out. The experimental data and the anisotropic properties at intermediate and high temperatures revealed by the experiments are significant for the application of the single crystal alloy. In addition, the experimental research for a kind of single crystal blade was also made. As the application of the researches the strength analysis and the life prediction were carried out for the single crystal blade of a certain aero-engine. In this part, the constitutive models and their applications are described, and the experimental research work will be described in part II.
基金National Natural Science Foundation ofChina!( 69772 0 0 2 )
文摘A new scheme for femur shape recovery from volumetric images using deformable models was proposed. First, prior 3 D deformable femur models are created as templates using point distribution models technology. Second, active contour models are employed to segment the magnetic resonance imaging (MRI) volumetric images of the tibial and femoral joints and the deformable models are initialized based on the segmentation results. Finally, the objective function is minimized to give the optimal results constraining the surface of shapes.
基金Supported by the Significant Term of Science and Technology Research in Ministry of Education (No. 205060)Open Research Fund of National Mobile Communications Research Laboratory,Southeast University (N200911)+2 种基金Significant Basic Research of Jiangsu Province Colleges and Universities Natural Science Projects (07 KJA51006)Research Fund of Nanjing College of Traffic Vocational Technology (JY0903)Huawei Science and Technology Fund
文摘An adaptive object tracking algorithm based on particle filtering and a modified Gradient Vector Flow (GVF) Snake is proposed for tracking moving and deforming objects. The original contours of objects are obtained by using the background differencing method,and the true contours of objects can be converged by means of the powerful searching ability of a modified GVF-Snake. Finally,an Energetic Particle Filtering (EPF) algorithm is obtained by combining particle filtering and a modified GVF-Snake,and by using K-means and the EPF algorithm,multiple objects can be tracked. The proposed tracking tactic for partially occluded objects can effectively improve its anti-occlusion ability. Experiments show that this algorithm can obtain better tracking effect even though the tracked object is occluded.
文摘为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿真结果,并研究模型转换直径与破碎模型对横向射流雾化过程仿真结果的影响。仿真结果表明:相比DPM,VOF-DPM仿真得到的射流穿透深度更接近试验结果,射流雾化过程更真实,并且能够捕捉到更详细的流场信息;当模型转换直径较小时,不能转换为离散相颗粒的液滴相对较多,这些液滴仍由VOF求解,并阻挡气流导致在其周围产生小涡团;添加破碎模型对射流穿透深度和流场结构几乎没有影响,但导致离散相颗粒继续破碎成更多更小的颗粒。
文摘本文利用DPM(Dust Production Model)模型模拟计算了我国北方沙漠地区不同的土壤微团粒在不同的地表粗糙度和地表摩擦风速下的水平跃移通量、粉尘释放通量、粉尘释放效率以及在特定量中粉尘粒子的质量和数浓度的分布,并对上述计算结果进行了讨论和分析。通过与实际观测结果进行对比的粗糙度和地表摩擦风速下粉尘释放通量后发现二者基本一致,从而证明了DPM模型是可以用来初步模拟中国北方沙漠地区的粉尘释放过程,这将有利于进一步较准确得模拟沙尘的输送、沉降以及气候效应。
