Liquefaction susceptibility and deformation characteristics of saturated coral sandy soils subjected to cyclic loadings-a critical review

Coral sandy soils widely exist in coral island reefs and seashores in tropical and subtropical regions.Due to the unique marine depositional environment of coral sandy soils,the engineering characteristics and responses of these soils subjected to monotonic and cyclic loadings have been a subject of intense interest among the geotechnical and earthquake engineering communities.This paper critically reviews the progress of experimental investigations on the undrained behavior of coral sandy soils under monotonic and cyclic loadings over the last three decades.The focus of coverage includes the contractive-dilative behavior,the pattern of excess pore-water pressure(EPWP)generation and the liquefaction mechanism and liquefaction resistance,the small-strain shear modulus and strain-dependent shear modulus and damping,the cyclic softening feature,and the anisotropic characteristics of undrained responses of saturated coral sandy soils.In particular,the advances made in the past decades are reviewed from the following aspects:(1)the characterization of factors that impact the mechanism and patterns of EPWP build-up;(2)the identification of liquefaction triggering in terms of the apparent viscosity and the average flow coefficient;(3)the establishment of the invariable form of strain-based,stress-based,or energy-based EPWP ratio formulas and the unique relationship between the new proxy of liquefaction resistance and the number of cycles required to reach liquefaction;(4)the establishment of the invariable form of the predictive formulas of small strain modulus and strain-dependent shear modulus;and(5)the investigation on the effects of stress-induced anisotropy on liquefaction susceptibility and dynamic deformation characteristics.Insights gained through the critical review of these advances in the past decades offer a perspective for future research to further resolve the fundamental issues concerning the liquefaction mechanism and responses of coral sandy sites subjected to cyclic loadings associated with seismic events in marine environments.

Deformation Characteristics of Hydrate-Bearing Sediments

The safe and efficient development of natural gas hydrate requires a deep understanding of the deformation behaviors of reservoirs.In this study,a series of triaxial shearing tests are carried out to investigate the deformation properties of hydrate-bearing sediments.Variations of volumetric and lateral strains versus hydrate saturation are analyzed comprehensively.Results indicate that the sediments with high hydrate saturation show dilative behaviors,which lead to strain-softening characteristics during shearing.The volumetric strain curves have a tendency to transform gradually from dilatation to compression with the increase in effective confining pressure.An easy prediction model is proposed to describe the relationship between volumetric and axial strains.The model coefficientβis the key dominating factor for the shape of volumetric strain curves and can be determined by the hydrate saturation and stress state.Moreover,a modified model is established for the calculation of lateral strain.The corresponding determination method is provided for the easy estimation of model coefficients for medium sand sediments containing hydrate.This study provides a theoretical and experimental reference for deformation estimation in natural gas hydrate development.

Spatiotemporal deformation characteristics of Outang landslide and identification of triggering factors using data mining

Since the impoundment of Three Gorges Reservoir(TGR)in 2003,numerous slopes have experienced noticeable movement or destabilization owing to reservoir level changes and seasonal rainfall.One case is the Outang landslide,a large-scale and active landslide,on the south bank of the Yangtze River.The latest monitoring data and site investigations available are analyzed to establish spatial and temporal landslide deformation characteristics.Data mining technology,including the two-step clustering and Apriori algorithm,is then used to identify the dominant triggers of landslide movement.In the data mining process,the two-step clustering method clusters the candidate triggers and displacement rate into several groups,and the Apriori algorithm generates correlation criteria for the cause-and-effect.The analysis considers multiple locations of the landslide and incorporates two types of time scales:longterm deformation on a monthly basis and short-term deformation on a daily basis.This analysis shows that the deformations of the Outang landslide are driven by both rainfall and reservoir water while its deformation varies spatiotemporally mainly due to the difference in local responses to hydrological factors.The data mining results reveal different dominant triggering factors depending on the monitoring frequency:the monthly and bi-monthly cumulative rainfall control the monthly deformation,and the 10-d cumulative rainfall and the 5-d cumulative drop of water level in the reservoir dominate the daily deformation of the landslide.It is concluded that the spatiotemporal deformation pattern and data mining rules associated with precipitation and reservoir water level have the potential to be broadly implemented for improving landslide prevention and control in the dam reservoirs and other landslideprone areas.

Pore structure of low‑permeability coal and its deformation characteristics during the adsorption–desorption of CH4/N2

The pore structure of coal plays a key role in controlling the storage and migration of CH4/N2.The pore structure of coal is an important indicator to measure the gas extraction capability and the gas displacement efect of N2 injection.The deformation characteristic of coal during adsorption–desorption of CH4/N2 is an important factor afecting CH4 pumpability and N2 injectability.The pore structure characteristics of low-permeability coal were obtained by fuid intrusion method and photoelectric radiation technology.The multistage and connectivity of coal pores were analyzed.Subsequently,a simultaneous test experiment of CH4/N2 adsorption–desorption and coal deformation was carried out.The deformation characteristics of coal were clarifed and a coal strain model was constructed.Finally,the applicability of low-permeability coal to N2 injection for CH4 displacement technology was investigated.The results show that the micropores and transition pores of coal samples are relatively developed.The pore morphology of coal is dominated by semi-open pores.The pore structure of coal is highly complex and heterogeneous.Transition pores,mesopores and macropores of coal have good connectivity,while micropores have poor connectivity.Under constant triaxial stress,the adsorption capacity of the coal for CH4 is greater than that for N2,and the deformation capacity of the coal for CH4 adsorption is greater than that for N2 adsorption.The axial strain,circumferential strain,and volumetric strain during the entire process of CH4 and N2 adsorption/desorption in the coal can be divided into three stages.Coal adsorption–desorption deformation has the characteristics of anisotropy and gas-diference.A strain model for the adsorption–desorption of CH4/N2 from coal was established by considering the expansion stress of adsorbed gas on the coal matrix,the compression stress of free gas on the coal matrix,and the expansion stress of free gas on micropore fractures.N2 has good injectability in low-permeability coal seams and has the dual functions of improving coal seam permeability and enhancing gas fow,which can signifcantly improve the efectiveness of low-permeability coal seam gas control and promote the efcient utilization of gas resources.

Application of modified discontinuous deformation analysis to dynamic modelling of the Baige landslide in the Jinsha River

Accurate dynamic modeling of landslides could help understand the movement mechanisms and guide disaster mitigation and prevention.Discontinuous deformation analysis(DDA)is an effective approach for investigating landslides.However,DDA fails to accurately capture the degradation in shear strength of rock joints commonly observed in high-speed landslides.In this study,DDA is modified by incorporating simplified joint shear strength degradation.Based on the modified DDA,the kinematics of the Baige landslide that occurred along the Jinsha River in China on 10 October 2018 are reproduced.The violent starting velocity of the landslide is considered explicitly.Three cases with different violent starting velocities are investigated to show their effect on the landslide movement process.Subsequently,the landslide movement process and the final accumulation characteristics are analyzed from multiple perspectives.The results show that the violent starting velocity affects the landslide motion characteristics,which is found to be about 4 m/s in the Baige landslide.The movement process of the Baige landslide involves four stages:initiation,high-speed sliding,impact-climbing,low-speed motion and accumulation.The accumulation states of sliding masses in different zones are different,which essentially corresponds to reality.The research results suggest that the modified DDA is applicable to similar high-level rock landslides.

Deformation and failure characteristics and fracture evolution of cryptocrystalline basalt

Cryptocrystalline basalt is one of the two major types of rocks exposed in the super large-scale underground powerhouse in Baihetan hydropower station in China.The rock of this type shows various sitespecific mechanical responses(e.g.fragmentation,fracturing,and relaxation)during excavation.Using conventional triaxial testing facility MTS 815.03,we obtained the stressestrain curves,macroscopic failure characteristics,and strength characteristics of cryptocrystalline basalt.On this basis,evolution of crack initiation and propagation was explored using the finite-discrete element method(FDEM)to understand the failure mechanism of cryptocrystalline basalt.The test results showed that:(1)under different confining stresses,almost all the pre-peak stressestrain curves of cryptocrystalline basalt were linear and the post-peak stresses decreased rapidly;(2)the cryptocrystalline basalt showed a failure mode in a form of fragmentation under low and medium confining stresses while fragmentation-shear coupling failure dominated at high confining stresses;and(3)the initial strength ratio(sci/sf,where sci and sf are the crack initiation strength and peak strength,respectively)ranged from 0.45 to 0.55 and the damage strength ratio(scd/sf,where scd is the crack damage strength)exceeded 0.9.The stressestrain curve characteristics and failure modes of cryptocrystalline basalt could be reflected numerically.For this,FDEM simulation was employed to reveal the characteristics of cryptocrystalline basalt,including high scd/sf values and rapid failure after scd,with respect to the microscopic characteristics of mineral structures.The results showed that the fragmentation characteristics of cryptocrystalline basalt were closely related to the development of tensile cracks in rock samples prior to failure.Moreover,the decrease in degree of fragmentation with increasing confining stress was also correlated with the dominant effect of confining stress on the tensile cracks.

Effect of particle characteristics on deformation of particle reinforced metal matrix composites

The particle characteristics of 15%SiC particles reinforced metal matrix composites(MMC)made by powder metallurgy route were studied by using a statistical method.In the analysis,the approach for estimation of the characteristics of particles was presented.The study was carried out by using the mathematic software MATLAB to calculate the area and perimeter of each particle, in which the image processing technique was employed.Based on the calculations,the sizes and shape factors of each particle were investigated respectively.Additionally,the finite element model(FEM)was established on the basis of the actual microstructure.The contour plots of von Mises effective stress and strain in matrix and particles were presented in calculations for considering the influence of microstructure on the deformation behavior of MMC.Moreover,the contour maps of the maximum stress of particles and the maximum plastic strain of matrix in the vicinity of particles were introduced respectively.

Deformation characteristics of surrounding rock of broken and soft rock roadway

A similar material model and a numerical simulation were constructed and are described herein. The deformation and failure of surrounding rock of broken and soft roadway are studied by using these models. The deformation of the roof and floor, the relative deformation of the two sides and the deformation of the deep surrounding rock are predicted using the model. Measurements in a working mine are compared to the results of the models. The results show that the surrounding rock shows clear theological features under high stress conditions. Deformation is unequally distributed across the whole section. The surrounding rock exhibited three deformation stages： displacement caused by stress concentration, theological displacement after the digging effects had stabilized and displacement caused by supporting pressure of the roadway. Floor heave was serious, accounting for 65% of the total deformation of the roof and floor. Floor heave is the main reason for failure of the surrounding rock. The reasons for deformation of the surrounding rock are discussed based on the similar material and numerical simulations.

Study on magneto-elastic-plastic deformation characteristics of ferromagnetic rectangular plate with simple supports

In this paper, the magnetic-elastic-plastic deformation behavior is studied for a ferromagnetic plate with simple supports. The perturbation formula of magnetic force is first derived based on the perturbation technique, and is then applied to the analysis of deformation characteristics with emphasis laid on the analyses of modes, symmetry of deformation and influences of incident angle of applied magnetic field on the plate deformation. The theoretical analyses offer explanations why the configuration offer- romagnetic rectangular plate with simple supports under an oblique magnetic field is in-wavy type along the x-direction, and why the largest deformation of the ferromagnetic plate occurs at the incident angle of 45°for the magnetic field. A numerical code based on the finite element method is developed to simulate quantitatively behaviors of the nonlinearly coupled multi-field problem. Some characteristic curves are plotted to illustrate the magneto--elastic-plastic deflections, and to reveal how the deflections can be influenced by the incident angle of applied magnetic field. The deformation characteristics obtained from the numerical simulations are found in good agreement with the theoretical analyses.

INTERFACE DEFORMATION CHARACTERISTICS OF BIMETAL FORMING

ＩＮＴＥＲＦＡＣＥＤＥＦＯＲＭＡＴＩＯＮＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＯＦＢＩＭＥＴＡＬＦＯＲＭＩＮＧ①ＰｅｎｇＹｉｎｇｈｏｎｇａｎｄＲｕａｎＸｕｅｙｕＮａｔｉｏｎａｌＤｉｅ＆ＭｏｌｄＣＡＤＥｎｇｉｎｅｒｉｎｇＲｅｓｅａｒｃｈＣｅｎｔｅｒ，Ｓｈａｎｇ...

Numerical Investigation on Dynamic Characteristics of Casing Deformation During Marine Hydrate Production

Formation subsidence is inevitable during marine hydrate decomposition,and the consequent casing deformation seriously threatens the security of sustainable hydrate production.Owing to insufficient observed data of formation subsidence in field,displacement boundary condition of casing is undetermined.Thus the conventional static methods are inapplicable for the calculation of casing deformation in hydrate production well.The present work aims at proposing an approach to investigate dynamic deformation of the casing during hydrate production.In the proposed methodology,based on the movement theory of hydrate decomposition front,hydrate decomposition process can be simulated,in which hydrate reservoir strength formation subsidence showed time-dependent characteristics.By considering the actual interactions among casing,cement and formation,three models of hydrate production well are developed to reveal the static and dynamic deformation mechanisms of the casing.The application of the proposed methodology is demonstrated through a case study.Results show that buckling deformation and bending deformation of casing reduce the passing ability of downhole tools in deformed casing by 4.2%and 7.5%,respectively.With the progress of hydrate production,buckling deformation will increase obviously,while a little increase of bending deformation will occur,as the formation slippage induced by formation inclination is much larger than that caused by hydrate decomposition.The proposed approach can provide theoretical reference for improving casing integrity of marine hydrate production.

Compacting Deformation Engineering Characteristics of Weathered Soft Rock Mixture in Subgrade

The engineering characteristics of weathered soft rock are important contents of soft rock mechanics. They also play a significant role in compacting deformation, which has been known to exert a significant amount of influence on the stability of highway filling subgrade engineering. In an effort to investigate this aspect of the problem, compacting tests and unconfined compressive strength tests have been carried out on weathered argillaceous slate and pelitic siltstone rocks, which are broken and graded before the test. The testing results indicate that the relationships of both between stress and strain and between axial strain and tangent modulus are exponential relationships; the size of the grain plays some influence on the deformation modulus, whereas the water content impacts the compressive strength greatly, which shows quadratic function; the unconfined compressive strength is linear with the dry density of loose soft rock mixtures. Therefore, the water content must be controlled in both the design and the construction of subgrade engineering of soft rock filling, and at the same time some effective measures should be taken to reach the requirement of compaction.

Tunnel Surrounding Rock Deformation Characteristics and Control in Deep Coal Mining

In order to study the failure characteristics and control method of deep tunnel surrounding rock, based on the stress test, the structure and stress state of the main transportation tunnel surrounding rock in Mine Zhaogezhuang level 14 was analyzed, and it shows that the surrounding rock is exposed to an interphase hard and soft disadvantageous structure state and complex high stress repeated addition area;Through the theoretical analysis and the statistical data, the relation between the tunnel stress transformation and the surrounding rock deformation was proposed;Through the numerical simulation of the tunnel surrounding rock failure process with the help of RFPA procedure, the results show that the damage of the transportation tunnel level 14 mainly occurs in the bottom and the two coal ribs, and the failure process is spreading from the bottom to the two coal ribs, and the effect of the surrounding rock deformation control is obvious by using the way of 2.5 m anchor with 1.0 m grouting strengthening.

Deformation characteristics and thresholds of the Tanjiawan landslide in the Three Gorges Reservoir Area,China

Since the first impoundment of the Three Gorges Reservoir(TGR)in China in 2003,more than 5000 landslides including potential landslides were identified.In this paper,a deep-seated active landslide in TGR area was analyzed.Fourteen years’monitoring data and field investigations from 2006 to 2020 were used to analyze the deformation characteristics,influencing factors,and meteohydrological thresholds.The landslide showed a none-overall periodic movement pattern featuring acceleration during long-duration rainfall and rapid transition to constant creep after rainfall events.Two secondary sliding masses,No.1 and No.2,were defined via field investigation.The reservoir has no impact on the deformation whereas long-duration-low-intensity rainfall is the main factor.At present,the cumulative displacements of the main sliding mass range from 0.9 to 3.2 m,and the deformation during the rainy season is gradually increasing.The boundary of this landslide was formed,and the boundary of No.2 sliding mass became obvious.The probability of the failure of sliding mass No.2 is very high under the conditions of continuous rainfall.The 15-day antecedent rainfall combined with 4-day cumulative rainfall could be the rainfall threshold which could be associated with the groundwater level S1 of 294 m above sea level for forecasting large deformation of Tanjiawan landslide.

Deformation Characteristics of Mono Strand Anchor Head

This paper investigates experimentally the deformation characteristics of the mono strand anchor head used in prestressed concrete bridge. Since the strains measurable in the anchor head are the axial and hoop strains, the deformation characteristics of the anchor head are examined by measuring these strains at various positions and according to the jacking force exerted on the pre-stressing strand. Moreover, the possibility to estimate the jacking force acting in the tendon based upon the measured strains and the corresponding error are evaluated.

Deformation characteristics of mechanical expanding of thin-walled cylindrical parts

Mechanical expanding is one of the finishing processes in cylindrical part forming. The distribution of stress and strain shows clearly regional features. FEA simulation and experiments show that the deformation process can be divided into three phases called as rounding phase, expanding phase and unloading phase in turn, in which the main types of deformation are wall bending, circumference elongating and thickness reducing, and spring back respectively. And the longitudinal section can be divided into three portions: expanding region, transition region and rigid region. The plastic deformation occurs regionally in suspended portion. A regional convex in transitional portion is inevitable.

NUMERICAL SIMULATION ON DEFORMATION CHARACTERISTICS OF AS WIRE BY CASTEX

Castex(continuous cast and extrusion)is a latest metallurgical technology Making of AS wire(aluminum clad steel wire) by Castex is an advanced bonding technology of bimetal In order to study the deformation character of AS wire the numerical simulation is performed with FE method From the simulation result the following conclusions are obtained:① The simulation is carried out sequentially in three zones:initial extrusion,cavity filling and bonding ② In the first zone the shearing deformation governs the whole zone,while in that of cavity filling, the deformation mainly concentrates on transition arc of the concave mould In addition, in the last zone, the dominant deformation lies at the boundary of concave mould, surface of steel wire and entry of sizing band Due to the movement of steel wire, the direction of shear stress on its surface is opposite to that on the boundary of concave die

Current tectonic deformation and seismogenic characteristics along the northeast margin of Qinghai -Xizang block

Based on the data from repeated precise leveling and across-fault deformation measurements carried out in recent 30 years and the analyzed results from GPS observations made in recent years along the northeastern margin of Qinghai-Xizang block, and combined with the geological structures and seismic activities, some characteristics in regional tectonic deformation and strong earthquake development are studied and approached preliminarily. The results show that: a) The space-time distribution of current tectonic deformation in this area is inhomogeneous with relatively intensive tectonic deformation in the vicinity of main boundary faults and weak deformation in the farther areas. The intensity of vertical differential movement and the deformation status vary with time, and the horizontal movement and deformation are characterized by apparent compression and strike-slip. b) The tectonic stress field generated by the NE-trending continuous compressive movement of Qinghai-Xizang block due to the northward press and collision of India plate is the principal stress for the tectonic deformation and earthquake development in this area. The evolution of space-time distribution of tectonic deformation and seismicity is closely related to the block activity and dynamic evolution of regional tectonic stress field. c) The vertical deformation uplift and high-gradient deformation zones and the obvious fault deformation anomaly appeared along the boundaries of tectonic blocks can be considered as the indicators of hindered block motion and intensified tectonic stress field for strong earthquake development. Usually, the above-mentioned phenomena would be followed by the seismicity of M6.0, but the earthquake might not occur in the place with the maximum movement. The zones with the fault deformation anomaly characterized by tendencious accumulation acceleration turning and the surrounding areas might be the positions for accumulation of strain energy and development and occurrence of strong earthquakes.

BRIEF REVIEW OF THE STRENGTH AND DEFORMATION CHARACTERISTICS OF SEDIMENTARY SOFT ROCK

The strength and deformation characteristics of sedimentary soft rock evaluated in relation to several large-scale researc and construction projects in Japan are reviewed.The elastic stiffiness at small non-linearity due to strain and pressure level,and viscous properties are described.The elastic stiffness from triaxial tests using high-quality core samples while measuring stresses and strains accurately is basically the same as the corresponding value from field shear wave velocity.It is necessary to take into account the dependency or stiffness on shear and pressure level,which could be evaluated by relevant laboratory stress-strain tests while referring to results trom relevant field loading tests.Loading rate effects due to the material viscous properties could be simulated by a non-linear three-component model.

Characteristics of Multipath Effects in GPS Dynamic Deformation Monitoring

ABSTRACT The multipath has long been considered a major error source in GPS applications .The characteristics 0f the GPS signal multipath effects are analyzed. based on which an experiment that considers the characteristics of dynamic deformation monitoring has been carried out. The solution results of observation data in two successive days are processed by a method,which combines the wavelet filtering and the differential correction betweentwo successive days. The research demonstrates that the multipath errors have stronger repeatability on successive days;after significantly mitigating the influence of multipath effects,the accuracy of three-dimensional positioning for GPS dynamic deformation monitoring can attain the mm level,an obvious accuracy improving particularly invertical component.The characteristics of GPS signal multipath,th eexperimental scheme and the qualitative and quantitative analysis of results are detailed.